Problem with sap start Up datbase

Dear Experts,
As we are using ecc 5.0 on oracle databse and os as Hp-UX .As our development server got down for some reasons and i tried to start up.as it is saying Database is unavailable .as i tried to open database it is up.and i tried to start sap services its getting ABAP DATABASE not AVAILABLE.
I found ENV variable differnces..in <SID>ADM as well ORA<SID>
In SIDADM it is haveing oracle 9i and env varabiles all set to oracle 9i and 920_64.,where as in ORASID it is oracle 10g and env are supporting 102_64before we have upgraded to 9i to 10g.and env all are in oracle 10g...now it has changed.please advice me regarding this..
Regards,
Naveen

Sorry it posted twice..
suggetion: close this thread

Similar Messages

  • Problem with SAP PI7.0 J2ee Engine starting

    Hi,
    Problem with SAP PI7.0 Server
    I am using AIX6.1 and p570
    J2ee engine is not starting but I am able to login to ABAP engine.
    When I am trying to long in through internet explorer it is not working.
    How to check J2ee engine started or not.
    If it is not started then how to start J2ee engine.
    If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.

    Hi,
    How to check J2ee engine started or not.
    Check the url http://ipaddress:5xx00/index.html
    If this url shows you the system info page then you j2ee engine is up.
    If it is not started then how to start J2ee engine.
    Check your server0.log file.
    If J2ee engine problem is there then how to solve the issue and where to check to solve the issue.
    Check for the problems in log file and do search in sdn or in the market place you will get plenty of info read them and try to resolve the errors.
    Regards,
    Vamshi.

  • Problem with SAP logon 720 for printng with Citrix.

    Hi,
    I have a problem with sap logon 720 when printing for Citrix, one time print and other time don't print....
    I try to start SAPLPD for prompt comand... it's start but don't print....
    i'm write here for look if other people have this problem... I dont know what I can do.....
    Thank you very much....

    Hi Itmar,
    I was having the similar issue on my Windows Server 2003 Terminal Server. At times SAP prints stop working. Then i changed Printer Type to "G" and it had solved the problem. It skips the use of SAPLPD service and calling windows printing service directly.
    Just try with that.
    Regards,
    Gaurav

  • One more Problem with SAP query

    Hi All,
    I am having a problem with SAP query
    Execution of SAP query transaction is leading to Dump
    the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
    When I tried regenerating the Query in SQ01
    " Query Specification cannot be use to generate list
    Ranked list contains only numeric fields
    Please help me

    Gianpiero Bucchieri wrote:
    > So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok. 
    >
    I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
    From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
    So what we have here (essentially is):
    VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
    But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
    Care to explain?
    Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM

  • Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?

    hello,
    I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
    Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
    If I can't is there any proof about it? I have to show it to a client.
    Best Regards,
    Pablo Mortera,

    Pablo,
    GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
    You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
    Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
    Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
    Regards,
    Amol

  • Hi, I have a Macbook Air 13 "and I have a problem with it starting when I open it and the logo appears below a cerculer that spins and nothing else. Still not opening up

    Hi, I have a Macbook Air 13 "and I have a problem with it starting when I open it and the logo appears below a cerculer that spins and nothing else. Still not opening up

    Hi aysha13
    Do check the article provided by BGreg. If it's not a h/w issue, you will be able to resolve it.
    Good Karma.
    Holydevil.

  • Problem with SAP Script FAX output

    Hi Friends,
    I have problem with SAP Script Fax output.
    After I issued output using the messge type, the print preview format shows me correct alignments and the right data. But when I go to List display using the menu bar functions from the print preview screen, the list is showing me the right data, but all the alignments at the main window went wrong.
    How do I rectify this problem? I need correct alignments in both form display and list display.

    Hi Sasidhar,
    Have you tried with different fax machine.
    Regards,
    Atish

  • Problem with SAP Content

    Hi,
    I have standard SAP business content set up to capture the revenue from my R/3 system.
    The cube is 0PCA_C01. I run a query on theis cube and the values do not match the corresponding values in my R/3 P&L statement (for the month of September)
    There are 5 revenue accounts and when I do an account comparison in R/3, I find that each of the accounts are off by a small amount.
    There have been no corrections or incorrect postings in R/3 and the daily delta update to PCA_C01 has never failed.
    Note that when I check the previous months (Aug, July etc) the revenue figures match perfectly.
    The accounts were closed a few days ago and no transactions have been posted in R/3 since then. The delta updates for the last few days have been running sucessfully.
    Please advise where I can start looking for a solution to this issue.
    Thanks and Regards,
    Dominic

    Hi,
    You are saying the report is matching with R/3 for month Aug ,July...etc. So I hope, there is no problem with Query and with update rules..etc.
    If you are using Aggreagtes, make sure that all requests are rolloed up. And also make sure that no load is failed .
    With rgds,
    Anil Kumar Sharma .P

  • Problem with SAP Transaction iView after Patch 34 install

    Hi All,
    We're running EP6SP2 on AIX/Oracle and have currently upgraded from PL5 to PL34.
    The problem we are now having is as follows:
    We have an SAP Transaction iView that is using the 'Auto' method for the 'Technique to start SAPGUI for Windows' and the 'WinGui' as the 'SAP GUI Type'.
    Now when we click on the iView we are getting the IE popup that asks us if we want to Save, Open, or Cancel the file open for tx.ssd
    Prior to the patch upgrade we did not have this issue.
    Any help would be appreciated.
    Thanks,
    Robin.

    Hi Praveen,
    Thanks for the quick response. 
    I have seen those notes already and unfortunately they don't solve this specific problem.  These will solve the problem for the SSD method (.sap file) of starting the SAPGUI for Windows but not for the SSF method (.ssf file).
    The main issue is that before the install of the Patch we did not get the popup, everything worked fine.  It doesn't make sense why we would have to change our IE settings now to get it to work properly.  It should work the same as before the patch.
    Plus, I don't want to have to do an SMS push to all the PC's here to fix a problem with a Patch upgrade.
    I have tried to add the .ssd and .sap types to the Mime section for the http service in the Admin tool but this hasn't fixed the problem either.
    Also, I found that in Patch 31 SAP has made a change to the way the SAP GUI for windows starts.  After some searching I found that in the file WinGuiRenderLayer.properties under
    the 'com.sap.appintegrator.sap/property/Transaction/' folder I see that it has some entries in it that look like they relate to the above mentioned fix for Patch 31. The lines in particular are:
    - # postfix for roundtrip URL - should help IE to detect the mime-type
    - SSF_URL_Postfix = /tx.sap
    - SSD_URL_Postfix = /tx.ssd
    These lines were not in this file prior to implementing the patch and I believe that this may be causing the problem. 
    Any other suggestions would be appreciated.
    Thanks,
    Robin

  • Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

    Hi everybody,
    we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
    Does anybody detect the same problems?
    Best regards,
    Ulli

    Most important question when you are talking about performance-issues:
    which OC are you working on and which excel version?
    ciao
    Joke

  • I've got a mac pro problem with the starting up, but also a red light on the logic board solidly on. Its not among the diagnostic led. It's located near the BT adapter and the front fans. Also the fans run loud also. any solutions?

    Hi
    I've got a mac pro late 2006, and i am having problem with it for quite a while now. the problem i am facing is the start up process, and the red light on the logic board. Earlier I've got the two led on the diagnostic leds 5 and 6 turned on without the diagnostic button being pressed, and i think those are related to the processors overtemp. I've managed to solve that by, removing the processors and re applying the thermal compound on the heatsink. what i have left now with is the red light on  the logic board at the time i plugged in the power. At the same time when this light come on, the power indicator at the front panel come on as well. i am not sure what is this light relates to. We've replace the power supply too, and gone through the SMC reset but seems no help.
    Any idea on the problem? I am desperate about it, and i will be greatful if anyone can help..
    thanks and hope for your best solutions
    Kari

    I can't help directly with your problem but you might check here http://tim.id.au/laptops/apple/macpro/ for a service manual which could answer your question.

  • Wierd problem with web start in windows 7

    I have a wierd problem with my web start app in windows 7, it just hang it self. it work fine in windows XP and Vista.
    The wierd thing is that i can open the app but when i press on a specific button that will make a jlabel present a .png image everthing crash. why do i get this problem now? when i start the app, i load some pic i jlabels and that seems to work fine, but when i do it under the exection it seems to crash, why?
    Should i do something different to make the app work in windows 7?
    I hope someone can help me out!!

    You should:
    a) open the console (java control panel, advanced options) and see the stackTrace (if any). If it's not there check for swallowing.
    b) post a code snippet, to at least show how and where you retrieve the png. Possibly a SSCCE.
    c) check if this happens also running as a standalone app (may be more Swing-related than JWS-related).
    Bye.

  • In case of problems with SAP GUI for Java  ...

    Hello all,
    in case of having problems (errors, ABAP dumps etc.) with SAP GUI for Java, please create an OSS message on component BC-FES-JAV with information described in OSS note 326558
    http://www.service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700010521522001.
    This makes sure our official support channels get aware of your problem.
    Thanks and best regards
    Rolf-Martin

    Hello Rolf-Martin,
    i don't have access to this website to view the note.
    The version of the Suse libc is:
    GNU C Library stable release version 2.3.2, by Roland McGrath et al.
    Copyright (C) 2003 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
    PARTICULAR PURPOSE.
    Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
    Compiled on a Linux 2.4.20 system on 2003-03-13.
    Best Regards,
    Piotr Brostovski

  • Problem with Getting Started

    Alright I'm having a problem with the Mac instructions for Getting Started with Alchemy (http://labs.adobe.com/wiki/index.php/Alchemy:Documentation:Getting_Started)
    Basically step 13 when I type :
    gcc stringecho.c -O3 -Wall -swc -o stringecho.swc
    gives me the following output
    Macintosh-3:stringecho aman$ gcc stringecho.c -O3 -Wall -swc -o stringecho.swc
    stringecho.c:10:17: error: AS3.h: No such file or directory
    stringecho.c:14: error: syntax error before ‘echo’
    stringecho.c:14: error: syntax error before ‘AS3_Val’
    stringecho.c:15: warning: return type defaults to ‘int’
    stringecho.c: In function ‘echo’:
    stringecho.c:22: warning: implicit declaration of function ‘AS3_ArrayValue’
    stringecho.c:22: error: ‘args’ undeclared (first use in this function)
    stringecho.c:22: error: (Each undeclared identifier is reported only once
    stringecho.c:22: error: for each function it appears in.)
    stringecho.c:29: warning: implicit declaration of function ‘AS3_String’
    stringecho.c: In function ‘main’:
    stringecho.c:41: error: ‘AS3_Val’ undeclared (first use in this function)
    stringecho.c:41: error: syntax error before ‘echoMethod’
    stringecho.c:47: warning: implicit declaration of function ‘AS3_Release’
    stringecho.c:47: error: ‘echoMethod’ undeclared (first use in this function)
    stringecho.c:50: warning: implicit declaration of function ‘AS3_LibInit’
    stringecho.c:50: error: ‘result’ undeclared (first use in this function)
    Macintosh-3:stringecho aman$
    From what I gather it seems that some files are missing (AS3.h) which is why the errors and warnings are caused... is there anything I have to do to get that file
    If anyone can help explain whats wrong and how to fix the problem it will be greatly appreciated
    Skribbs

    ausrelemac wrote:
    No, I enter pin, everything was fine, even wrote that connected to the network.
    then swipe to the left, to connect to the wi-fi and then writes: searching a mobile network. and can do nothing. 
    maybe my sim is not suitable ? I buy a sim free device...
    do you have a data plan on it?
     if not then you need to set it up with wifi
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Problem with SAP GUI for HTML

    Hi SDN
    I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the  SAP Easy Access screen in html. Can any one suggest me how to rectify this error and display the required transaction in html.
    Thanks in advance.
    Regards
    Basha

    Hi Basha,
    Try this in the browser:
    http://<host>:<port>/sap/bc/gui/sap/its/va01?sap-client=100(XXX)
    1) It will ask for the username and password
    2) Enter the credentials and it should directly take you to the VA01 transaction
    If it fails again, try this:
    http://<host>:<port>/sap/bc/gui/sap/its/vl31w?sap-client=100(XXX)
    This should display the "Create Inbound Delivery NotificationTitle Create Inbound Delivery Notification " sreen."
    If it faisl again, there is some problem with the way the ITS has set up. Check with your basis.
    Thanks,
    Sathya

Maybe you are looking for