Problem with saving pictures

I think I have accidentally clicked on something or changed a setting by mistake. Now when I go on to internet and try to do "save as or save picture as" whatever I am tyring to save opens up in to Illustrar. I don't want this to happen. I just want to get back to the normal way and "save as " into my pictures or documents. Help!

Oh cool, Thanks I have sorted it. I just went in to my browser and searched through all the settings. Just a simple tick to turn off and it is sorted, well it sems to be .
Thank you for your help.
Sue x

Similar Messages

  • Problem with saving picture in Vision Builder

    hello
    I'm using Vision builder and i'm trying to save picture with Image Logging. And i made ftp server that picture could be save. In folder path I write location where I want that picture save. But problem is, that picture does not saves in that location where I want.
    Could anybody help me?
    Please
    Matjaz
    p.s.: I attach a picture that You will see how I made my settings
    Attachments:
    napaka.jpg ‏4307 KB

    rezi wrote:
    why is writen 257 "/" is current directory ??
    It means that root is current directory.
    For setting VBAI as current directory it should be something like
    CWD VBAI
    250 OK. Current directory is /VBAI
    PWD
    257 "/VBAI" is your current directory.
    Try to remove VBAI from Folder path and leave this setting just empty. Then your images should be written into root directory. Also you have selected option "Log images when inspection status FAIL". May be your status PASS? In this case images will be not logged. Try to change this option to "Log Image".

  • Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

    Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • Problems with saving edited photos using Photoshop Elements 5.0 on WIndows 8.

    Since a week I can not save the edited photos - when I try the communicate: "Caould not complete your request because of a program error" appeares. I had no problem with saving edited photos before, with the same software. My computer runs on Windows 8, 64 bit version. My Photoshop Elements is version 5.0. Where is the problem?

    W dniu 2013-06-16 15:36, dj_paige pisze:
    >
    Yes, I did it long ago.

  • Problem with "Saved with Id" in Reports

    Hi Group,
    I am having problem with "Saved with id" functionality.
    1.) I created a Query in sq01 as "query1".
    2.) Copied the source code of this query into a z program
    ztest_query.
    3.) Now executed the report "ztest_query" in background with "Saved with Id" checkbox checked and id as "1234".
    4.) Now where/how can I search for this id "1234" to retrieve my list.
    5.) Normally if I dont change the report name and use the program aq*query1 which is self generated one, this works and I am able to retrieve the saved list from Transaction
    SQ01.
    Please let me know how this can be achieved.
    Regards
    Ankur Bhandari

    Ankur,
    Did you find a solution for this problem. Not many seem to be using this "Save list to id" functionality.
    Thanks
    Vyas

  • Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

    Hi Guys,
    I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
    What is the problem here so I can get Pictures onto my Computer. ,

    Hi Noob Søren
    There are a few things that are confusing in your question.
    As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
    You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
    I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
    You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
    Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
    If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
    Hope this helps
    WN

  • Problem with displaying picture.

    I use PS-CC and LR5.on a HP i7 computer and windows 7.Camera D-800, pictures in raw.
    I usually import pictures in nef  in LR5,. After  some corrections, I export my pictures to DNG format. I sometimes do a little bit of work in camera raw then go into Photoshop.
    My problem: When in photoshop, I get a grainy version of my photo which wasn't the situation in LR5 or Camera raw, Hard to work with. The grains will disappear when I enlarge the picture but then I have to enlarge it so much that I only see or can work with only part of my picture. The problem does not appear in CS6.
    Hope somebody can help me.
    Thanks
    Jacques Legault

    I should clarify this.. When I import photos into LR5, I always use copy as
    DNG. I know that NEF and DNG are the same for photoshop and I always shoot
    in raw.
    One thing I do not know is how to do a screen shot. I will get back tro you
    on that. When I say grain, or noise if you like, I mean that, if i relate
    to films, my picture in LR5  would be at ISO 100 and my screen shot in
    photoshop would look like it was boosted to 1200 or worse.
    See you soon I hope with a screen shot.
    2014-06-14 13:43 GMT-04:00 twenty_one <[email protected]>:
        Problem with displaying picture.  created by twenty_one
    <https://forums.adobe.com/people/twenty_one> in *Photoshop General
    Discussion* - View the full discussion
    <https://forums.adobe.com/message/6458682#6458682>

  • Problems with saving a file

    Hello,
    Im having problems with saving files on my computer, from Mail and Safari. I have 900gb free diskspace, but i simply cant save anyhow, it says my disk is full.
    Have i accidentally locked something up?
    Regards,
    Niclas

    Run disk utility on your hard drive to repair your permissions.  http://support.apple.com/kb/HT1452

  • Problems with Saved Watermarks - Wrong Font Size

    Hi,
    I am having problems with "Saved" Watermarks, as when I selected them they have the wrong font size.
    I created a Watermark (Draft) to be placed on the lower right
    corner of a PDF, using font Arial-10. This watermark has been save using the "Save Settings..." in Watermarks.
    When I add this this "saved" watermark to a new PDF, the font size is wrong
    (much much bigger), even though the Add Watermark windows reports Arial-10. Only by a selecting a different font size and changing it back to the saved font size (10) I get the correct Font Size in the PDF.
    I had a similar problem with the placement, but managed to solve that by setting the Preference>User&Guide to the used Unit (Page&Ruler = centimeters). But for the font size I can't find anything in the preference.
    Any Help or Suggestions ?

    Hi,
    Sorry forgot to add, I am using
    Acrobat Professional 8.1.2 on Windows XP Prof.
    Cheers
    Johannes

  • Error, problem with saving documents, Illustrator

    I have a problem with saving documents in Adobe Illustrator (CS6): when I import to my document some jpg, tiff etc (even it isn't huge) Illustrator is crashed ("program to stop working correctly because of a problem. Windows will close the program and notify you if there is a solution available."). Next: program close.
    But when I work only with objects from AI - everything is ok - any error, I can save it.
    I have reinstalled and updated AI. And nothing changed.
    What is a problem?

    <moved from Downloading, Installing, Setting Up to Illustrator>

  • Problem with saving TIFF from PDF in Photoshop and importing into Corel

    I work at a publishing company, and some of our designers use CorelDraw X14. We receive most of our advertising material in PDF format, which I then have to convert to TIFF in Photoshop (I use CS4). Most of the time this works fine, but lately, the TIFF files appear ragged and very low resolution (especially the text) once they are imported into Corel. When I re-open the TIFF files in Photoshop they seem fine, as well as viewing them with a picture manager program. Does anyone have any idea why this happens, and if the problem lies with the may I save the TIFF files or the way they are imported into Corel? TIFF files created from Corel don't have the same problem.

    I concur with Bart - they are using the preview because someoen ticked a wrong checkbox or enabled a fast preview mode... Should print and export without issues, though.
    Mylenium

  • Problems with simple picture gallery

    I've got a website project where the client wanted a picture
    gallery. I don't really do much with Flash so I went on the web and
    found a tutorial on how to get what I want. Problem is that the
    instructions I followed are fairly old so I couldn't export my
    movie any higher than AS2 and Flash 6 and have it work. That would
    be fine except that I wanted to use a feature that requires Flash 8
    or higher, namely a gradient mask. I was hoping that I could post
    my code and have the board gurus help me out with what i need to do
    to get everything working together.
    First you'll want to create a movie using AS2 and Flash 8 to
    see what I'm trying to accomplish, then export it again with Flash
    6 to see it actually working. You can grab a copy of what I'm
    working with here:
    http://www.technospider.com/~david/rusty.zip
    All help greatly appreciated.
    Thanks,
    David

    based on experience. i didn't check your file.
    you're not likely to get anyone in this forum to check your
    file.
    if there's not code problem, and you can't publish for flash
    8, there will be an error message. if you can publish for flash 8,
    you see no error message but your application fails to work
    correctly, you must have a problem with code.

  • Problems with the pictures in automatic mode

    I bought an xperia Z1 just a few days ago, I just find a problem with the camera flash, when I take a picture in automatic mode. 
    failure is, when a picture is taken in autmomatic mode, the right side of the picture, left with a bright white shadow, wich is ruining the photos.
    I need your help, Its so frustrating, I thought I had made ​​the right decision when I bought this computer, but apparently not
    attached a sample image
    hopefully you can help me
    kind regards

    Probably there was something that reflected your flash.I suggest you disable flash in panoramic night shots.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Problems with saving decimal data

    Hello!
    I was faced with problem during saving decimal data via Excel input schedules. We use BPC 7.0 MS, SQL Server 2008.
    One of the main customer demands is using decimal comma (",") due to Russian regional settings and standards. We've switched server regional options and one of the client machine's regional options into Russian, all integer data is sent to SQL correctly but during saving decimal data we got error - Type mismatch.
    Do you mind how to solve this issue? Or it is possible only using English standarts?
    Thanks for your help.
    Regards, Maksim.

    Hi Maksim,
    To understand if you have set correct regional settings for you SAP BPC server you have to check the follow keys:
    HKEY_USERS\.Default\Control Panel \ International
    HKEY_USERS\S-1-5-18\Control Panel \ International
    HKEY_USERS\S-1-5-19\Control Panel \ International
    HKEY_USERS\S-1-5-20\Control Panel \ International
    HKEY_USERS\S-1-5-21\Control Panel \ International
    HKEY_USERS\S-1-5-21.....\Control Panel \ International
    should have all the keys for English US.
    Kind Regards
    Sorin Radulescu

  • Open Create Replace problems with saving file patterns

    Hello, I got a problem with open/replace/create function. Could you please clarify each function how it works? As you can see in my file, I try to save into the specified file path. The values appear in the text file but when I change some values in the data mainstream, it replaces the old value it has been. I want to have the whole data in one file till I close it and open another file for the operation.
    How can I do it??
    Thank you
    Solved!
    Go to Solution.
    Attachments:
    Values Measurement 1-main.vi ‏34 KB

    Hi,
    I can't see your VI as it is in a newer version of LabVIEW than I have, so if you want any more specific help you'll need to save the VI as a previous version. (File -> Save as previous version) I have LabView 2009.
    However, I have made a quick little example you could use. You don't need to use Set File Position if you use Shift Registers, as shown in the attached picture.
    David.
    Attachments:
    WritetoFile-simple.png ‏21 KB

Maybe you are looking for