Problem with searchsettings.exe (Mozilla Malware)?

For several days I have had a screen that comes up on boot-up that says basically there is a problem with SearchSettings.exe and it will not start. I did some research and see that it is part of an iObit toolbar system and is basically malware. I found a fix online, but it didn't work so I had to restore. I think my registry cleaner might have remove part of it but I can't find out how to get rid of this annoyance.

Here is a guide on how to remove searchsettings.exe:
It was part of a toolbar and probably the registry cleaner deleted the uninstall files for the toolbar.

Similar Messages

  • I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

    I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • Problem with explorer.exe when LR starts

    When starting LR (V1.0) the task manager reports that explorer.exe is eating up about 50% of my CPU. Closing LR does not have an effect. Only a re-start clears it up. This is now the second time I have installed LR as there was a conflict the first time I upgraded from the beta 4 version. I have searched through many of the same folders that my LR library uses with Bridge and Windows explorer and there was no problem with explorer.exe. Only upon starting LR does the problem occur. Any advice much appreciated. Thank you!
    Windows XP Media Center Edition SP2
    Pentium 4 3.2 GHz
    2 GB RAM

    Firefox is the last ever version of Firefox for Win98 / SE / ME.
    You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.

  • Problem with PadExe.exe message occurs at the boot-up

    On booting up, which takes anything up to 30 minutes and more, I receive a message that there is a problem with PadExe.exe
    It seems that padhook.dll is the problem. Putting PadExe or PadExe.exe into the search facility on the Toshiba site reveals no answer.
    Does anyone know how I can resolve this problem? The slow boot up I can live with (just don't switch off!)
    Thanks for any help.

    This could be an part of the Toshiba Touch and Launch software.
    Toshiba Touch and Launch offers easy movement and freedom of programs navigation with TouchPad
    I see only one way to solve such error messages. Try to remove this software from the OS and after clean removing and booting you should install it again.

  • Having problem with svchost.exe/ntdll.dll errors causing GPSVC (Group Policy Client) to crash preventing users from logging into the server.

    Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
    to svchost.exe and therefore is protected from being manually restarted.
    I noticed the following errors when this occurs:
    Log Name:      Application
    Source:        Application Error
    Date:          7/23/2013 4:35:26 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000024
    Fault offset: 0x00000000000cd7d8
    Faulting process id: 0x46c
    Faulting application start time: 0x01ce877f9476ac07
    Faulting application path: C:\Windows\system32\svchost.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
    Event Xml:
    <Event xmlns="">
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
        <Security />
    All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
    about 5 months ago a similar error fired on a non-virtual machine:
    Log Name:      Application
    Source:        Application Error
    Date:          2/27/2013 6:57:58 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      AAW29033
    Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
    Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
    Exception code: 0xc0000024
    Fault offset: 0x00000000000cd7d8
    Faulting process id: 0x6c0
    Faulting application start time: 0x01ce14e1af313fd9
    Faulting application path: C:\Windows\system32\svchost.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
    Event Xml:
    <Event xmlns="">
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
        <Security />
    I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
    the Group Policy Client service to stop?

    You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
    I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
    When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
    however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
    I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
    If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
    **EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
    to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot.

  • CS4 Problem with Acrobatinfo.exe

    I'm having a really obnoxious problem with CS4 (as far as I can tell, every part of it, tested with InDesign, Acrobat, Illustrator and Photoshop).
    Every time I open an Adobe application and every 30 second to 3 minutes thereafter, my system hangs for a few seconds, with stuttering screen updates and then the whole screen flickers with a greenish tinge and then goes back to normal.
    I've managed to track down the problem to the process Acrobatinfo.exe. Once I started watching the tack manager, I noticed that, without fail, each hang and flicker was preceeded by about 15 seconds of Acrobatinfo.exe starting, sitting around and then peaking at 50% CPU (all of one core/processor I imagine). Shortly after that, the process closes and everything is good again for another few minutes.
    System is Windows XP, SP3. 2GB of RAM (and this happens even if nothign else is running). All windows and video card drivers are completely up to date.
    Is anyone else having this problem? Any ideas on how to solve it?

    After over 10 hours of pain, I've finally solved this problem. It was the Adobe Improvement Program.
    I discovered this after noticing that none of the other accounts on this computer had the problem I was having, so after hours of painfully rebuilding my profile from scratch and testing as I went, Acrobat asked if I'd like to join the program.
    The second I signed up the same flickering and hangs started up again, and as soon as I said "no [email protected]#[email protected]#!$ thank you" it fixed the problem.
    Apparently declining to join the program just on Acrobat set a global setting, as none of the other CS4 apps exhibited any slowdowns after that.
    I am livid at the time I wasted tracking down this ridiculous bug, and hopefully this provides some help to others who experience similar problems.

  • Execution problem with java.exe

    Hi everybody. I am a student in a belgian university, and i've got a problem with the execution of my binaries in the JVM.
    I'm developping my project with Eclipse. When I build the project, Eclipse launch perfectly my application with javaw.exe (I supposed it because it's written in the console when I run the project).
    Thus, I wanted to try to launch my application by myself, to check if everything is right...
    My project is composed like this :
    - creavea/src : the sources of my project (a package called "main" , and a package "com.creavea. ..." and other .jar files like a MySQLConnector/J, edtFTPj, the JOutlookBar by lf2prod, ...
    - creavea/bin : Eclipse puts the binaries there, when I run my project.
    - creavea/files : Somes files like configuration files for my application, etc ...
    - creavea/images : Images for my interface.
    - the main class, containing the pubilc static void main method, is called CreaGesta, and is in the "main" package.
    creavea is the name of my project, but i think you supposed it !
    I want to run the binaries, then i do this :
    - I open a ms-dos console
    - I'm going in the C:\eclipse\workspace\creavea\bin folder
    - I execute the command : java main.CreaGesta ...
    And it doesn't work :'( ! An error appears :
    Exception in thread "main" java.lang.NoClassDefFoundError : com/lf2prod/common/swing/JOutlookBar.
    This class, JOutlookBar is used by my application, and the jar file containing the class is in my /bin folder. I can't understand, i'm a little bit disapointed.
    It's my first big project in Java, then i don't really understand what's happening. So if someone can help me, it will be really nice for me ! Thanks a lot for your help !
    J�r�me - Belgium

    Thank you for your reply Atmguy ! I put in my command the classpath of the jar's who are in my /bin folder.
    Like this : java -classpath edtftpj-1.4.9.jar; jdom.jar;l2fprod-common-outlookbar.jar;mysql-connector-java-3.1.8-bin.jar main.CreaGesta But now, i've got an other error message :
    Exception in thread "main" java.lang.NoClassDefFoundError : main/CreaGestaOh, it changed ! but I don't understand the problem . What does it mean? "Java cannot find the class main/CreaGesta", or "An error occured in main.CreaGesta" ?
    Can somebody help me to solve this new error ? Thank you !

  • Problem with my exe code

    I have a small problem regarding to my code. I have attached the source code. There isn't any problem with the vi code. But when I convert the vi to exe, and double click the exe file in order to open it , the program is trying to start, I mean it is acting like I clicked the run button. I said it is not a problem, because all the values (test duration, delay duration, high limit, low limit) are zero. Therefore it is attempting to run, but only very small portion of the pressure reading occurs. What do you think about the cause of this problem? Thanks for your help.
    front panel1.jpg ‏47 KB ‏45 KB

    Hi Ahmet,
    when duration and delay are zero, the your DAQ loop will (probably) run only once, thus giving you only small amount of data...
    Best regards,
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments: ‏35 KB

  • Problem with BRIGHT.EXE in QOSMIO G40

    Hello and good morning,
    I'm a new user here at the forum, and i hope i'm posting in the right place :).
    I just bought, well in march a Qosmio G40, and i'm very pleased with it, but 3 days ago I noticed a problem with it, the program BRIGHT.EXE, which controls the brightness of the flatscreen is not working (well, it stoped working), when i press the button in the operacional front panel, or use the combination FN+F6 or F7, it doesn't work, windows says that the program BRIGHT.EXE gave an error but doesn't specify which error.
    Does anyone have any idea of why it is happening and a way to solve it ?

    Thank you guys for your answers.
    I'll try first to install the Value Added Package first. Do I have to uninstall the version i have first? or can i start the instalation and it will uninstall automatically ?
    And then if the re-installation won't work, i'll try to rollback my OS.
    Ricardo Monteiro
    BTW: as i have Vista in Portuguese (:( ) i still don't have SP1 ehehe
    Message was edited by: ricardo_monteiro

  • Burning problem with gneux.exe

    hi, this is the problem with gui can any body suggest me how to download a file with name c:\program Files \sap\frontend\sapgui\gneux.exe its very urgent pls respond immediately

    Do you have the installation CD  with you ?

  • Forms6i - problem with jre.exe

    I have a problem with installation of Forms6i.
    I have processor Celeron 1700 and Windows XP.
    I have installed Forms6i, but when I try to run Oracle Net8 Easy Config
    there is an error with jre.exe and program close.
    I have installed Patch 10 but the error is continually present.
    I don't know what I can do.
    I know, that it is probably the processor's fault.
    It's very important to me.
    If somebody knows what to do, please mail me: [email protected]

    Forms6i is not yet certified on XP. See Re: required query for this requirement
    Grant Ronald
    Forms Product Management

  • Problems with Setup.exe LMS3.2 on Window 2008 Enterprise Sp2 32 Bit

    I have problems installing LMS 3.2. I get the following error during the installation process:
    I already deactivated Windows Defender and DEP. After the Error the Installation finishes successfull. You can log in with the given credentials but when you are forwarded to the portal after login the browser shows "Page not Found".
    /* Style Definitions */
    {mso-style-name:"Table Normal";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-fareast-font-family:"Times New Roman";
    Problem signature:
      Problem Event Name:                        BEX
      Application Name:                             setup.exe_InstallShield
      Application Version:                 
      Application Timestamp:                     4a030a42
      Fault Module Name:                          ErrStack.dll_unloaded
      Fault Module Version:              
      Fault Module Timestamp:                  4a1c4e04
      Exception Offset:                                02ac26a0
      Exception Code:                                  c0000005
      Exception Data:                                   00000008
      OS Version:                                          6.0.6002.
      Locale ID:                                             1033
      Additional Information 1:                  b2be
      Additional Information 2:                  82109204b3973566ace818217390e302
      Additional Information 3:                  9025
      Additional Information 4:                  5466bb6e3df7ad4e5cd4fca294d8db3a
    Read our privacy statement:

    This looks like CSCte84743.
    Installation of CiscoWorks LAN Management Solution fails when the installer is trying to configure CiscoWorks Assistant.  The error seen will be related to OpsConfUpdate.exe:
    The application has failed to start because GGShared.dll was not found.  Re-installing the application may fix this problem.
    This can occur on Windows 2003 and 2008 servers.  The underlying root cause is still not known.
    Configure the following registry key value:
    HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer\DisableRollback : DWORD : 0x00000001
    Then, a clean installation of LMS should be performed.  Once LMS is installed, this registry key value should be removed.
    However, the problem with the page not found error could be CSCtb17186.  If you try Firefox and get a redirection error, then that would confirm this bug.

  • Problem with Powerbuilder MAPI / Mozilla Thunderbird / Tobit David

    since PB 12.6 (Build 4035) we have problems using the "mailsession" object with programs like "Mozilla Thunderbird" or "Tobit David".
    Although e.g. Mozilla is the default email client on the users computer, the mailsession object always tries to send mails using Outlook.
    With PB 12.5 it worked as it should.
    I read that you changed the mailsession object to "extended mapi". Do we have to rewrite our code to send mails with Mozilla again?
    We send mails like that:
    mailSession     mSes
    mailMessage     mMsg
    mSes = CREATE mailSession
    mMsg.Subject          = "Subject"
    mMsg.NoteText         = "Body"
    mMsg.Recipient[1].Name               = "Test"
    mMsg.Recipient[1].Address           = "[email protected]"
    mMsg.Recipient[1].RecipientType  = MailTo!
    mMsg.AttachmentFile[1].Pathname    = "c:\print\invoice.pdf"
    mMsg.AttachmentFile[1].FileType    = mailAttach!
    mMsg.AttachmentFile[1].Position    = 1
    mRet = mSes.mailSend(mMsg)

    Hi Stefan,
    Engineering did get back to me and they will implement a fix to check whether the default client supports Extended MAPI and if not, use SImple MAPI.   I've opened CR 781930 to add this check into the MAPI implementation.
    As these are not email clients we use, could you please export the registry entries for these mail clients from this registry key below.
    Please rename the .reg files to .txt and attach them here.

  • Machine.config entry problems with ODAC1110510beta.exe

    The ODAC1110510beta.exe adds entries under the <membership>, <profile>, and <roleManager> config sections in machine.config.
    The problem is that the entries are added like this: (edited to save space)
    <membership defaultProvider="AspNetSqlMembershipProvider" userIsOnlineTimeWindow="15" hashAlgorithmType="">
    <add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider... />
    <clear />
    <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider... />
    The OracleMembershipProvider was added in front of the AspNetSqlMembershipProvider. Then a <clear/> was added afterward -- removing the OracleMembeshipProvider that was just added. Obviously, that is not very useful. The same thing occurs in the Profile and RoleManager config section.
    Please modify the install to added the Oracle provider entries at the end of the prooviders list.
    <membership defaultProvider="AspNetSqlMembershipProvider" userIsOnlineTimeWindow="15" hashAlgorithmType="">
    <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider... />
    <add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider... />

    Hello faustina,
    According to the link below, this error may occur if there is a process that is attempting to log data to a database that does not exist or that Citadel cannot access. The root cause of this can be anything from a firewall, a corrupt process in the Distributed System Manager, or possibly the result of deleting different databases through Windows Explorer rather than using Measurement & Automation Explorer (MAX) (which doesn't seem to apply here). I've also included a customer forum below regarding this same error in which stopping all processes except for "System" and restarting the computer has solved this issue. Most likely, if you are no longer experiencing this issue and all that has changed was the installation of your software, it may have been corruption within the DSM. (Runtime Error With Tagsrv.exe When Shutting Down Or Turning On PC)  (NI Variable Engine (tagsrv.exe) Runtime Error Dialog Upon Restart -- Resolved)
    Wes W
    Application Engineering
    National Instruments

  • Problem with VM in Mozilla 1.1 for Mandrake 9.0

    Alright. I'm really not sure what's going on here... I'm trying to get the java_vm working on my i686 Mandrake box. It was working fine on my 8.2 but for some reason it's screwy now...
    So I download/install (via rpms from Sun's site) the j2re and I find the Netscape plugins that go into my plugins dirs ( /usr/lib/mozilla-1.1/plugins/ )
    I go into mandrake, check about:plugins and it gives me a list including application/x-java-vm, and it says it's operational
    But now, every time I try to access a java plugin it shuts off the entire program and pretends it was never running.
    Any clue what I can do about this? Might be something to do with bringing over old preferences from my old 0.9.8 mozilla? I figured that I might try a Mozilla forum with this, but the exact same problem happens with galeon... any suggestions?

    I'm with the same problem, I tried other versions of j2re and mozilla and nothing worked.

Maybe you are looking for

  • Old 144G Apple TV - External Hard Drive

    My old Apple TV has a 144G hard drive and I want to know if I can use the USB connection in the back to connect to my iMac for an external hard drive? Would hate to waste the memory simply because I upgraded to the new Apple TV.

  • Videos do play but are not loading properly and plays choppy.

    Videos on websites as do play but are not loading properly and plays choppy, I don't have this problem in Safari or Chrome

  • SAP Exit Variable not returning values - 0CMONTH

    Hi all - I'm running a query in our Q system that has a variable restriction of: LOW: 0CMONTH - 12 HIGH: 0CMONTH - 1 Because today is April 17, 2007, I expect my result range to be April 2006 - March 2007. I'm currently getting "No Applicable Data Fo

  • Getting a copy of SAP Certificate

    Hi, I received SAP Abap certification way back in 1999. Since then I have worked in different parts of the world and during the course of my journey this certificate has been stolen from my property in South Africa. Is it possible to get a replacemen

  • Administrator Account disabled

    Recieve run.dll errors on my laptop. Attempted to remove error by resfreshing. I lost apps and program files. Attempted to refresh lap to factory conditions. Now my laptop shows "Administrator account has been disabled". Unable to gets to windows pro