Problem with security code in sleeping mode.

I had activated the option of the security code in sleeping mode and now the code is not acceptable. I think the problem is in the language but the language does not change with the shortcut on the keyboard and there's nothing in the screen to indicate it that I can change it from there. What can I do?

Is it possible that someone with access to the phone may have changed the password? The password can only be reset by a Nokia Care Point. They will probably require proof of purchase before doing it for you.

Similar Messages

Problems with MacBook Pro's sleep mode.

I have done several searches on the forums and cannot find a solution.
I have a Mid 2012 MacBook Pro 13". Recently, my laptop does not seem to "wake up" properly from sleep mode. The laptop goes to sleep perfectly fine. The sleep indicator light is on and "glows"…which is normal. Then not long after, the light turns off. It seems like the laptop has shut down. My computer won't wake when I try pressing keys to wake my laptop afterwards. However, it turns on when I press the power button. When it turns on, the apple logo screen with a progress bar appears on the bottom. It also makes the sounds as if my computer is turning on from shut down mode. The progress bar reaches abut 99% and stops there. No matter how long I wait, the laptop is stuck on that screen. I hold the power button, turn off the computer, restart, and it boots up normally. This only happens with the laptop plugged in to be charged. Sleep mode works fine when I am running on battery.
This did occur shortly after upgrading to Mountain Lion, but I don't think this is the cause as it was working fine the day I upgraded it.
I'm not sure what the cause could be, any suggestions?

Stopped using Google Chrome, problem has not occurred again.

Problems with security code on apple iphone

I am unable to download updates to my I-Phone. It is version 5.1 and I am using a PC and version ITunes 6.0 and have made sure that funds are available in my account to download apps as well as verifying my billing information several times. However, it is still indicating an error message of: Security Code is invalid
Any thoughts on how to resolve this problem?

Your payment method is being rejected. If you're sure the information is correct, contact the issuing bank to find out what the problem is. If they show no problems, contact iTunes support.

Hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on.

hello my Mac Air is frozen on the grey screen (with the apple symbol, sleeping mode, restart-and off button), once you turn it on. I Can`t press any button.My Mouse still works. Battery is charged. Alt-cmd-escape doesn`t work It even after a forced shutting off, the problem is the same.   what should i do? Thank you for your help.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
     a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. The battery is distinct from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

Finder crashes with External Drive on Sleep Mode

I purchased my new iMac 21,5" less than a week ago, and I haven't had a problem with it except for one that it's been bugging me a lot.
I have a LaCie 1TB Quadra d2 external drive that I use to store footage (since it's HD, the filesize won't fit in my 500TB internal hard drive), but I noticed that sometimes when LaCie external drive enters in Sleep Mode, the Finder freezes and the only two ways around this, is to force reboot, because the Finder won't answer and won't open again, or unplugging the external drive without ejecting him first, which it's not safe for me to do, because I'm afraid of hurting the device, and the files in it are pretty important.
This happens almost everytime, especially after a long time on sleep mode. I usually leave Final Cut Pro transferring files all night (since it takes a long time) so I kinda need the sleep mode, but when I wake up, Finder and Final Cut Pro won't answer.
I updated to Snow Leopard 10.6.8 on day one. Is there a way to fix this? Is it normal? I read somewhere that some users were having trouble with external drives on Sleep Mode, but I can't seem to find any further information about this problem.
Thanks!

I've got a MacBook Pro 13.3" that's a little over a month old, with a LaCie 1TB LaCie d2 Quadra with USB 3.0, #301542U and I'm suffering the same problems and a few others with it. I've got a partition on it set up as my Time Machine backup drive. I've turned off the Put the hard disk(s) to sleep when possible in the Energy Saver preferences but I'm still having the sleep problem with it. According to the LaCie Manual:
By default, your drive will enter Eco Mode after 30 minutes of inactivity in order to conserve energy. To exit Eco Mode, simply access data on the drive and the disk will automatically restart. You can manage this feature using LaCie Desktop Manager. Click the Eco tab.
The LaCie Desktop Manager (in my case) only takes me to the Energy Saver Preferences in OS X to adjust the time there. Turning off Put the hard disk(s) to sleep when possible doesn't seem to make any difference, the drive still goes to sleep after 30 minutes. However, after 15 minutes the drive seems to wake back up, but then during the next 15 minutes goes comatose (no power light). Sometimes it will go through multiples of these sleep wake cycles without going into a coma, but eventually it does go into a coma. This happens in between hourly Time Machine backups.
After locking up Finder, Disk Utility and Time Machine multiple times trying to access the drive in this state I figured out that I could cycle the power switch to regain use of it (with a Finder warning of course) but this will only lead to file corruption eventually and I shouldn't have to resort to this. I've also dismounted it, expecting it to turn off and instead it goes into an extended spin down cycle (rapidly flashing light) and never turns off (or goes to sleep or what ever it's supposed to do) and once again requires turning the power switch off.
This is just too unpredictible and unrelable for me and as soon as I get the opportunity to do a 7 pass erase I'll be returning to the place of purchase. Based on the reviews of other external hard drives a drive from another company doesn't look to be much better of a prospect so I'm not sure what I'm going to do.

I cannot get iCloud keychain to Approve with Security Code.

I wiped my iPhone 5s thinking that I could get access to my keychain back by using the "Approve with Security Code" button. When I put in my security code, it sends me a verification code via SMS to my phone. Afterwards, it goes back to the Keychain settings page and gives me the option to Approve with Security Code. Does not give an error message as if I messed up the Security Code or the Verification Code. The same thing happens when I try to Approve my Mac via SMS. I have tried to get this working on iOS 7.0.3, 7.0.4, and 7.1, as well as OSX 10.9. Any ideas on how I can get this feature working again?

I've used these boards a lot, so I wanted to respond to how I overcame the problem. You're given an option of setting it up from the phone, or your computer. In my case, I have a macbook pro. From my computer, I allowed the iPhone to receive icloud. It's under settings, iCloud, and the question will pop up. I'm not a tecky guy, so that's the best I can do. If that doesn't work, I'd try signing out of iCloud on your laptop or desktop, then signing back in. Futz around with the password on your iPhone until it comes up on your computer, then allow the iPhone to receive iCloud from your computer. Hope this helps!

Problem with php code. Please help!

Hello!
I'm using the following syntax to bring content into my
websites' layout template:
Code:
<?php //check in the root folder first
if(file_exists('./' . $pagename . '.php'))
include './' . $pagename . '.php';
//if it wasn't found in the root folder then check in the
news folder
elseif(file_exisits('./news/' . $filename . '.php'))
include './news/' . $pagename . '.php';
// if it couldn't be found display message
else
echo $pagename . '.php could not be found in either the root
folder or the news folder!';
} ?>
What it's essentially saying is, if you can't find the .php
file in the _root folder, look for it in the /news/ folder.
It works perfectly if loading something from the _root folder
but I get an error if I need to bring something from the /news/
folder.
Can anyone see any potential problems with my code?
Thank you very much and I hope to hear from you.
Take care,
Mark

I've never seen the code written like that before, but I'm
assuming it's
legal?
Perhaps try:
<?php
$newsroot = $_SERVER['DOCUMENT_ROOT']."/news";
if (!file_exists("$pagename.php")) {
elseif (!file_exists("$newsroot/$pagename.php")) {
else
Or the other thing you can try is replacing the elseif
statement with:
elseif (!file_exists("news/$pagename.php"))
If not - I'm sure Gary will be on here soon...
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Proud GAWDS Member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"Spindrift" <[email protected]> wrote in
message
news:e5mled$272$[email protected]..
> Hello!
>
> I'm using the following syntax to bring content into my
websites' layout
> template:
>
> Code:
>
> <?php //check in the root folder first
> if(file_exists('./' . $pagename . '.php'))
> {
> include './' . $pagename . '.php';
> }
> //if it wasn't found in the root folder then check in
the news folder
> elseif(file_exisits('./news/' . $filename . '.php'))
> {
> include './news/' . $pagename . '.php';
> }
> // if it couldn't be found display message
> else
> {
> echo $pagename . '.php could not be found in either the
root folder or
> the
> news folder!';
> } ?>
>
> What it's essentially saying is, if you can't find the
.php file in the
> _root
> folder, look for it in the /news/ folder.
>
> It works perfectly if loading something from the _root
folder but I get an
> error if I need to bring something from the /news/
folder.
>
> Can anyone see any potential problems with my code?
>
> Thank you very much and I hope to hear from you.
>
> Take care,
>
> Mark
>

Problem to come back from sleep mode in Lenovo Thinkpad T400 using Windows XP

Problem to come back from sleep mode in Lenovo Thinkpad T400 using Windows XP. Each time closing the T400 lid and try to make the laptop into a sleep mode for some time, it does not properly come out of sleep mode. Login screen is able to see when opening the lid for the first time, but it only seen for a while before then a black screen on T400 Thinkpad appears. Sometime the hard drive activity can be shown also. And then, to come back I had only one option to hard re-boot.
I tried Fn+F4 and power button once to come back but no use.
Please provide me some solution for this?
Thanks in Advance.

oh sorry and its been closed inbetween uses. When i open it the keyboard doesn't light up and it makes no sound.

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

expresslane.apple.com to get a hold of itunes to reset them by email the only way

HT5312 Problem with security question

I have Problem with security question

The Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

HT5699 Having problem with security question

Cannot get iTunes card to work having problem with security question

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

Please tell me what is the problem with this code

Hai,
Iam new to Swings. can any one tell what is the problem with this code. I cant see those controls on the frame. please give me the suggestions.
I got the frame ,but the controls are not.
this is the code:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class ex2 extends JFrame
JButton b1;
JLabel l1,l2;
JPanel p1,p2;
JTextField tf1;
JPasswordField tf2;
public ex2()
setDefaultCloseOperation(EXIT_ON_CLOSE);
setTitle("Another example");
setSize(500,500);
setVisible(true);
b1=new JButton(" ok ");
p1=new JPanel();
p1.setLayout(new GridLayout(2,2));
p2=new JPanel();
p2.setLayout(new BorderLayout());
l1=new JLabel("Name :");
l2=new JLabel("Password:");
tf1=new JTextField(15);
tf2=new JPasswordField(15);
Container con=getContentPane();
con.add(p1);
con.add(p2);
public static void createAndShowGUI()
ex2.setDefaultLookAndFeelDecorated(true);
public static void main(String ar[])
createAndShowGUI();
new ex2();
}

import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class ex2 extends JFrame
    JButton b1;
    JLabel l1,l2;
    JPanel p1,p2;
    JTextField tf1;
    JPasswordField tf2;
    public ex2()
        setDefaultCloseOperation(EXIT_ON_CLOSE);
        setTitle("Another example");
        b1=new JButton(" ok ");
        p1=new JPanel();
        p1.add(b1);
        p2=new JPanel();
        p2.setLayout(new GridLayout(2,2));
        l1=new JLabel("Name :");
        l2=new JLabel("Password:");
        tf1=new JTextField(15);
        tf2=new JPasswordField(15);
        p2.add(l1);
        p2.add(tf1);
        p2.add(l2);
        p2.add(tf2);
        Container con=getContentPane();
        con.add(p1, BorderLayout.NORTH);
        con.add(p2, BorderLayout.CENTER);
        pack();
        setVisible(true);
    public static void createAndShowGUI()
        ex2.setDefaultLookAndFeelDecorated(true);
    public static void main(String ar[])
        createAndShowGUI();
        new ex2();
}

Vector, what is the problem with this code?

Vector, what is the problem with this code?
63 private java.util.Vector data=new Vector();
64 Vector aaaaa=new Vector();
65   data.addElement(aaaaa);
74 aaaaa.addElement(new String("Mary"));on compiling this code, the error is
TableDemo.java:65: <identifier> expected
                data.addElement(aaaaa);
                               ^
TableDemo.java:74: <identifier> expected
                aaaaa.addElement(new String("Mary"));
                                ^
TableDemo.java:65: package data does not exist
                data.addElement(aaaaa);
                    ^
TableDemo.java:74: package aaaaa does not exist
                aaaaa.addElement(new String("Mary"));Friends i really got fed up with this code for more than half an hour.could anybody spot the problem?

I can see many:
1. i assume your code snip is inside a method. a local variable can not be declare private.
2. if you didn't import java.util.* on top then you need to prefix package on All occurance of Vector.
3. String in java are constant and has literal syntax. "Mary" is sufficient in most of the time, unless you purposly want to call new String("Mary") on purpose. Read java.lang.String javadoc.
Here is a sample that would compile...:
public class QuickMain {
     public static void main(String[] args) {
          java.util.Vector data=new java.util.Vector();
          java.util.Vector aaaaa=new java.util.Vector();
          data.addElement(aaaaa);
          aaaaa.addElement(new String("Mary"));
}

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

Hello I have a problem with security questions and i cant reset to my email The error was   Exceeded Maximum Attempts We apologize, but we were unable to verify your account information with the answers you provided to our security questions. You have

Hello
I have a problem with security questions and i cant reset to my email
The error was
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
Click here      for assistance.
i waited more than eight hours. and back to my account but it is the same ( no change ) i cant find forgot your answers
http://www.traidnt.net/vb/attachment...134863-333.jpg
can you help me please

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

Problem with security code in sleeping mode.

Similar Messages

Maybe you are looking for