Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

Similar Messages

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Can I send and receive e-mails on my iPad through Verizon?

Can I send and receive e-mails on my Ipad (third generation) the same as I do on my iPhone 4s? Both are through Verizon. And if I can, where do I set it up at? Thanks.

Yes. Why couldn't you use the same email account?
Settings>Mail, Contacts, Calendars>Add Account>Other. Start there.

I cannot not send and receive e-mails

Translated with the help of Google Translate.
Mail: Version 7.3 (1878.6)
Two-step verification set
Since a number of weeks I cannot not send and receive e-mails.
And I cannot find an answer in the support community.
I suppose the cause can be found in the two-step verification or in the TLS certificate ... but in this I am a layman.
The connection wizard explanes:
iCloud IMAP Failed to log on this iCloud IMAP account. Make sure the username and password are correct
SMTP Failed to log on this SMTP account. Make sure the username and password are correct.
I'm 99.999% sure that the username and password are correct. Those missing 0.001% can be found in another problem somewhere else. Who advises me?
My settings are as follows:
[Account Information]
iCloud IMAP
E-mail: [email address] @ me.com
Incoming mail server: imap.mail.me.com
username: [email address] @ me.com
password: my iCloud account {four digits, a hyphen, five Uppercase, 1 lowercase}
server name outgoing e-mail: smtp.mail.me.com
TLS certificate
[Outgoing mail server / Edit SMTP Server List / account information]
Server Name: smtp.mail.me.com
TLS certificate
[Outgoing mail server / Edit SMTP Server List / advanced]
custom port: 587
Use SSL: yes
Authentication: Password
username: [email address] @ me.com
password: that of my iCloud account
[Advanced]
IMAP path prefix: left blank
Port: 993
Use SSL: yes
Authentication: Password
Use IDLE command: checked.
I hope I get soon an answer.
iMac (27-inch Mid 2010), OS X Mavericks (10.9.5), Mail

Troubleshooting Apple Mail
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

I have recently bought a new domain which is hosted so that I can send and receive e-mails

I have recently bought a new domain which is hosted so that I can send and receive e-mails & run a webpage. It has POP3 and SMTP settings that I can use to send and receive my e-mails via Outlook on my PC. However, it doesn't work on my iPad. I have changed port settings and appear to be able to send but each time I start the Mail application my iPad reports "username or password incorrect" even though these correctly work on my PC. MS Outlook Exchange 2010 Live Mail works OK with the same settings on my iPad but I would like to get all my mail via the iPad inbuilt application.
Can anyone help?

POP3 accounts are really designed only to be used from one computer and some email providers actually 'lock' the account while in use to stop it being used by another computer/device at the same time.
Try closing Outlook, wait some minutes then try accessing it from the iPad. You may find it works once the POP3 connection has been released.
Ideally, you should be using IMAP because POP3 is old and not suitable for modern, multi-device usage.

What settings do I need to use to be able to send and receive e-mails when away from home?

what settings do I need to use on an iphone4 to be able to send and receive e-mails when away from home?

Should be the standard Gmail settings, then: smtp.gmail.com
These settings will be configured automatically for you if you go to Settings > Mail, Contacts, and Calendars > Add Account > Gmail. Then enter your login info.
http://support.apple.com/kb/HT4810

Problem sending and receiving BT mail

unable to send / receive BT mail , display pop up showing "unable to send from selected server"

Hi, LesHillbrae.
Thank you for visiting Apple Support Communities.
I understand that you are unable to send or receive email. Here is the best resource to go through when troubleshooting issues with email.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Cheers,
Jason H.

Send and receive e-mail

I can access the internet with WMP5AGS, but I cannot send or receive e-mail using my Comcast.net address through Outlet Express. Message says can't make a connection.

Are you using Linksys Router?
Let me know the Model number of the same .....
Becuase the issue you are facing is not related to the Adapter ..... but thereare few settings we can change on the router .....

Problem with sending and downloading pictures on c...

I have a problem with downloading and sending pictures in chat. It says that "sending canceled" under the picutre ... Why is that ? I didn't do anything with it. Please help me solve this problem !
Attachments:
Bez tytułu.jpg ‏68 KB

What version of Windows are you on (XP, Vista, Windows 7, Windows 8 )? Is it 32-bit or 64-bit?
http://support.microsoft.com/kb/827218
What is the version of Internet Explorer installed on your computer?
In Internet Explorer go to Help -> About Internet Explorer.
P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

Proxy to Proxy Scenario with sender and receiver on same instance

Hi,
I have a scenario to integrate Erecruit to HR system usng standard content. Both the Erecruiting and HR are on same instance so my sender and receiver is the same system. Standard ABAP proxies are provided.
Now I need some help in how to configure the channels and the agreements as both the sender and receiver are on same instance. Do i need to use parties?
do i have to create a sender communication channel?
Please let me know the stps required in configuration for this scenario.
Thanks in advance.

Hey
It does not matter if your sender and receiver are same system or different systems,the configuration steps will be the same.
In your case you would need
1 Receiver determination
1 interface determination
1 receiver agreement
1 receiver communication channel(of type XI adapter,this will connect to HR system).
No party or sender communication channel or sender agreement are required.
You need to have configured 1 business system for HR system in SLD though.
Thanx
Aamir
Edited by: Aamir Suhail on Jul 23, 2008 7:36 PM

Unable to send and receive e-mails

before everyone says do this do that , ive done it all. updated, reset, took battery out, service book.
it just suddely stopped working, im ready to fling the phone in the bin, it is of no use to me if not working. i need access to e-mails.
hope someone can help. looking at the internet this is a very common fault, why is this
hope someone can help

Both, the official route to RIM support is via your carrier - if they are seeing no issues on their network, and they have followed through the standard fault diagnoses steps - reboot, resend service books, remove and re-add email address then they should escalate the issue into RIM for their support.

Can send or receive e-mail on exchange e-mail in 3g, but not wireless

Hello,
At work, i have an exchange e-mail which is using "Active Sync" so that I can connect my e-mail, contacts, calendar, etc on my iphone. I have the settings set to push and fetch my data automatically (i know it uses more of the battery too).
Everything was working for the past 3 months until just a few days ago where I cannot send or receive my e-mail unless i come off of the wifi settings. 3g works, but not wifi...when I am on wifi, I can get the internet on my phone just fine, just not my exchange e-mail (cannot send either). It takes like up to 20 minutes to receive an e-mail on wireless, but on 3g it is almost instant.
HELP?
thank you very much

Am in Olympia WA for the holiday - I live in San Diego - I agree started two days ago. I spent 3 hours with Apple Support - they conferenced in ATT and they were no help. Eventually - I did a restore and did not change a thing. Am using 1.1.2.
Something happened late monday as it was fine sat - mon night. Since I do not live in WA - I assume things will be OK when I return to CA. Giving ATT a call might help - but you will definately need to get it escalated to a higher level.
I have sent this forum link to the great apple T3 support person that spent so much time with me - hopefully he will forward on to ATT and it will get resolved for all of you. Something did change on Monday night.

How to correctly configure send and receive connectors for SBS2011 exchange to connect to EOP

Hello SBS fans,
we have a customer with SBS2011 and exchange. The server email is setup for Exchange Online Protection.
It passes the Remote Connectivity Analyzer for inbound and outbound email. It shows a warning for the spf, saying it cannot find the spf record, BUT MXtool box passes everything associated with their domain name, including the spf record.
They are now getting some bounced email from yahoo servers, referencing this ip
65.55.169.249, which is a valid Microsoft ip.
I checked the bounce back email header carefully, and found a reference to an internal ip, 192.168.11.14, which just happens to be the ip of the user's desk PC!! - NOT the local addr of the sbs2011 server (which should not be there anyway)
I will guess that there is an incorrect setting in one or both of the hub transports? There is a correct smart host connector.
I am no longer sure about the other connectors!
Any ideas on this?
ewholz
Network and Server Installs

Hi,
à
It shows a warning for the spf, saying it cannot find the spf record
Would you please let me know the complete warning message that you can get? Meanwhile, would you please let
me know how long ago you add the SPF record? Be
more than 72 hours?
Please also refer to following article and check if can help you.
Configuring
Exchange 2007 Hub Transport role to receive Internet mail
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Problem with heading in received e-mails

In some of the e-mails I receive instead of the To line listing my name, it lists that of a particular friend's name. Sometimes when I receive a cc of an email, it states the cc is to this same friend and not to me. How do I change this? Thank you.
Subject: Your Camera & Photo Delivers from Amazon.com--May 2008 Edition
From: [email protected]
Date: May 31, 2008 7:19:07 AM EDT
To: a friends name

The problem was an incorrect listing in the address book. This was corrected and the problem solved.

Problem with sending and receiving e-mail through exchange [GMail]

Similar Messages

Maybe you are looking for