Problem with "Shockwave Flash is busy or not responding" message

Hello,
I am getting the "Shockwave Flash is busy or not responding" message, visiting the site on which I am working on for one client. Site is http://www.puntacanajustsafari.com/
I have installed one flash widget for weathercast and imediatelly after installing I have got the message "Shockwave Flash is busy or not responding"  - browser, buttons, scrolling - everything simply freeze! Few minutes just standing by, not responsive, and then eventually page start to scroll normally. Since then I changed widget position, made it to show on tour page only ( http://www.puntacanajustsafari.com/punta-cana-jeep-tour/ ) but after facing the same problems with flash thing I have removed it completely and installed one other widget and made separate page for weather information, that seems to work nicely (for now).
Problem is that I am still geting "frozen" page when visiting home page and tour page, even after clearing the page cashe and removing widget. This is happening on both browsers that I use (firefo and IE) so I am partially sure that is not a browser problem. This is first time happening to me, if somebody can figure out what to do, I would appreciate it.

Clear your browser's cache and cookies. I'm not seeing any issues in Firefox,  Chrome or IE
Nancy O.

Similar Messages

  • Problem with OLAP SAPBI SHOWING Server in not responding

    Hi All,
    Problem with OLAP SAPBI SHOWING Server in not responding
    SBO0001)",
    Iam Creating a universe , When iam Retriving my olap cube query it showing the error "Server in not responding (SBO0001)",
    Thanks In advance
    Praveen Kumar Yagnamurthy

    I am receiving this same error.  I have these additional details:
    CS: COM Provider CLSID not specified or erroneous
    In my case, this is for a universe that I created in BOE XI R2 sp5.4 and migrated up to BOE XI 3.2 sp2.  This connection uses OLEDB.  I have the same situation with another universe that I migrated over that uses an ODBC connection and it works fine.
    In my case, I am not using OLAP.

  • I have recently been having problems using Firefox: it continually gives a "Not Responding" message.

    I have been having problems using Firefox for the past few months:
    Whenever I log on, I get a "Not Responding" message, and Firefox "freezes." I then have to "click" my mouse several times to again be able to use Firefox - but only for a few minutes. Firefox then freezes again and shows another "Not Responding" message.
    Because of this repeated "crashing," I have been using I.E. as my browser, because it does NOT have any such problems.
    How can I FIX this problem with Firefox?

    Many site issues can be caused by corrupt cookies or cache.<BR><BR>
    Clear the Cache<BR>
    '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
    <BR><BR>and<BR><BR>
    Remove Cookies<BR>'''''Firefox/Tools > Options > Privacy.'''''<BR>
    Under '''History''', select Firefox will '''Use Custom Settings'''.<BR>
    There is a button on the right side called '''Show Cookies'''.<BR><BR>
    If there is still a problem,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
    <BR>While you are in safe mode; '''''Firefox Options > Advanced > General'''''.<BR>
    Look for and turn off '''Use Hardware Acceleration'''.<BR>
    Poke around safe web sites and see if there is still a problem. Then restart.

  • Mouse problem with FCP: drops clips or do not respond to clicks.

    hi to all.
    since i bought my macpro i've been noticing a very annoying problem when using FCP. there's a moment when the mouse stops to work properly and begins to drop clips when i try to move it or do not respond to clicks. two examples: 1- i want to move a clip from the end of the timeline to its beggining. in the middle of the way, it just drops the clip, as if i stoped pressing the mouse button. 2- i choose the pen tool so i can play with opacity and create fades. in the middle of the process of adjusting, it stops to work. i have to keep pressing several times to complete the action.
    the problem is basically with the CLICK function. the cursor responds to the mouse properly, but when you click something to move it, it doesn't recognizes when you stop it and drops things. it happens only with fcp.
    i'm using fcp 6.0.1, though the problem happened when i was using fcp 5.

    I have a similar problem with my mouse in FCP. Perhaps not the same thing, but I think I figured out it's due to the design of the mouse. It's an Apple A1152, a white one-button mouse with a little scroll wheel. The thing is the whole top presses down for the click, and if I don't grab the two little tabs on the side that give you the leverage to keep on pressing the top, across larger distances I lose the pressure necessary and I drop whatever it is I was dragging. It's a pain because my hand is not the right size or shape to naturally get a hole of those little tabs. I don't know if your problem is related in any way but I thought I'd mention it just in case...,

  • Socket problem with reading/writing - server app does not respond.

    Hello everyone,
    I'm having a strange problem with my application. In short: the goal of the program is to communicate between client and server (which includes exchange of messages and a binary file). The problem is, when I'm beginning to write to a stream on client side, server acts, like it's not listening. I'd appreciate your help and advice. Here I'm including the source:
    The server:
    import java.io.IOException;
    import java.net.ServerSocket;
    public class Server
        public static void main(String[] args)
            ServerSocket serwer;
            try
                serwer = new ServerSocket(4443);
                System.out.println("Server is running.");
                while(true)
                    ClientThread klient = new ClientThread(serwer.accept());
                    System.out.println("Received client request.");
                    Thread t = new Thread(klient);
                    t.start();
            catch(IOException e)
                System.out.print("An I/O exception occured: ");
                e.printStackTrace();
    }ClientThread:
    import java.io.BufferedInputStream;
    import java.io.BufferedOutputStream;
    import java.io.ByteArrayOutputStream;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.io.OutputStream;
    import java.net.Socket;
    import java.net.SocketException;
    public class ClientThread implements Runnable
        private Socket socket;
        private BufferedInputStream streamIn;
        private BufferedOutputStream streamOut;
        private StringBuffer filePath;
        ClientThread(Socket socket)
                this.socket = socket;     
        public void run()
            try
                 this.streamIn = new BufferedInputStream(socket.getInputStream());
                 this.streamOut = new BufferedOutputStream(socket.getOutputStream());
                int input;
                filePath = new StringBuffer();
                System.out.println("I'm reading...");
                while((input = streamIn.read()) != -1)
                     System.out.println((char)input);
                     filePath.append((char)input);
                this.streamOut.write("Given timestamp".toString().getBytes());
                ByteArrayOutputStream bufferingArray = new ByteArrayOutputStream();
                  while((input = streamIn.read()) != -1)
                       bufferingArray.write(input);
                  bufferingArray.close();
                OutputStream outputFileStream1 = new FileOutputStream("file_copy2.wav");
                  outputFileStream1.write(bufferingArray.toByteArray(), 0, bufferingArray.toByteArray().length);
                  outputFileStream1.close();
                this.CloseStream();
            catch (SocketException e)
                System.out.println("Client is disconnected.");
            catch (IOException e)
                System.out.print("An I/O exception occured:");
                e.printStackTrace();
        public void CloseStream()
            try
                this.streamOut.close();
                this.streamIn.close();
                this.socket.close();
            catch (IOException e)
                System.out.print("An I/O exception occured:");
                e.printStackTrace();
    }The client:
    import java.io.*;
    public class Client
         public static void main(String[] args) throws IOException
              int size;
              int input;
              //File, that I'm going to send
              StringBuffer filePath = new StringBuffer("C:\\WINDOWS\\Media\\chord.wav");
              StringBuffer fileName;
              InputStream fileStream = new FileInputStream(filePath.toString());
            Connect connection = new Connect("127.0.0.1", 4443);
            String response = new String();
            System.out.println("Client is running.");
              size = fileStream.available();
              System.out.println("Size of the file: " + size);
            fileName = new StringBuffer(filePath.substring(filePath.lastIndexOf("\\") + 1));
            System.out.println("Name of the file: " + fileName);
            connection.SendMessage(fileName.toString());
            response = connection.ReceiveMessage();
            System.out.println("Server responded -> " + response);
            ByteArrayOutputStream bufferingArray = new ByteArrayOutputStream();
              while((input = fileStream.read()) != -1)
                   bufferingArray.write(input);
              bufferingArray.close();
            FileOutputStream outputFileStream1 = new FileOutputStream("file_copy1.wav");
              outputFileStream1.write(bufferingArray.toByteArray(), 0, bufferingArray.toByteArray().length);
              outputFileStream1.close();
              byte[] array = bufferingArray.toByteArray();
              for (int i = 0; i < array.length; ++i)
                   connection.streamOut.write(array);
              response = connection.ReceiveMessage();
    System.out.println("Server responded -> " + response);
    connection.CloseStream();
    Connect class:import java.io.*;
    import java.net.Socket;
    import java.net.UnknownHostException;
    public class Connect
    public Socket socket;
    public BufferedInputStream streamIn;
    public BufferedOutputStream streamOut;
    Connect(String host, Integer port)
    try
    this.socket = new Socket(host, port);
    this.streamIn = new BufferedInputStream(this.socket.getInputStream());
    this.streamOut = new BufferedOutputStream(this.socket.getOutputStream());
    catch (UnknownHostException e)
    System.err.print("The Host you have specified is not valid.");
    e.getStackTrace();
    System.exit(1);
    catch (IOException e)
    System.err.print("An I/O exception occured.");
    e.getStackTrace();
    System.exit(1);
    public void SendMessage(String text) throws IOException
    this.streamOut.write(text.getBytes());
    System.out.println("Message send.");
    public void SendBytes(byte[] array) throws IOException
         this.streamOut.write(array, 0, array.length);
    public String ReceiveMessage() throws IOException
         StringBuffer elo = new StringBuffer();
         int input;
         while((input = streamIn.read()) != -1)
              elo.append((char)input);
         return elo.toString();
    public void CloseStream()
    try
    this.streamOut.close();
    this.streamIn.close();
    this.socket.close();
    catch (IOException e)
    System.err.print("An I/O exception occured: ");
    e.printStackTrace();

    The problem that was solved here was a different problem actually, concerning different source code, in which the solution I offered above doesn't arise. The solution I offered here applied to the source code you posted here.

  • MOVED: Having problem with Shockwave Flash

    This topic has been moved to MSI Notebooks & Netbooks.
    https://forum-en.msi.com/index.php?topic=180490.0

    Clear your browser's cache and cookies. I'm not seeing any issues in Firefox,  Chrome or IE
    Nancy O.

  • I have a problem with the latest version of itunes not responding when i open it.

    Every time i open itunes on my PC i cant do any thing and have to use task manager to close it as it keeps not responding

    Thanks but I had already read this, and it was no help at all.  Under the Summary tab, "Options", there is no check-box to manually manage my stuff.  I suspect this is because it is a 2nd gen iPod, with ONLY manual management.  The only way to delete my stuff seems to be to reset the entire device.
    I like to listen to podcasts.  What is particularly frustrating is that the 4th gen shuffle CANNOT play podcasts, but ONLY music, which I discovered after a lot of research and multiple visits to an Apple store.  So I have to resort to an older version of the shuffle to play podcasts  And now with the latest version of iTunes there seems to be no way to delete any podcasts on the older version.  Apple just makes it harder and harder for us podcast-lovers, driving us away from Apple -- driving me away from the entire brand and from ALL Apple devices, not just iPod.

  • Getting "Not responding" message and bridge freezes

    When launching Bridge CC on a PC with Windows 7 it gives a "not responding " message in the title bar. If left alone it will eventually open, but is incredibly slow to go to another folder, gets hung up and gives the same "not responding" message.
    It opens to the same folder every time, even if left off at another folder.
    I have uninstalled Bridge CC and reinstalled and still get the exact same problem. Also have done registry cleanup and other PC maintenance.
    Does anyone know of a solution?

    Perhaps someone close (geographically) can give you a hand?
    [http://windows.microsoft.com/en-ca/windows/view-cpu-utilization-performance-information#1TC=windows-7 This Windows Help article] explains how to check for resource use on your PC.
    What I described is a one-step test in Thunderbird: ''On the Help menu, click on "Restart with Add-ons Disabled". '' This would help determine if the problem is among an add-on installed in Thunderbird.
    If that doesn't show improvement, the problem is not within Thunderbird but elsewhere in the system. Starting the computer in Safe Mode then helps confirm if the problem is in Windows (and not specifically in Thunderbird).
    I understand you may not be comfortable doing this by yourself, perhaps ask someone close to help you in person, by showing them our answers here.

  • Problems with both Flash/Shockwave

    I'm experiencing problems with both Flash and Shockwave
    players. I've gone to the help pages for both of these players and
    I've followed every suggestion they had in there for players not
    playing even if they are installed. I have the ActiveX enabled in
    Internet Properties, security software is not in anyway afilliated
    with this problem, so that leaves me with being stumped and
    fustrated. I hope that you guys can help me out if anyway possible.
    Also, when I try reinstall Flash and Shockwave, both "successfully
    installed" flash videos do not show up.
    I will say this though, the posibility of an accidental
    uninstallment of both plugins not too long ago might've resulted in
    this problem.
    Thanks.

    quote:
    Originally posted by:
    errantfire
    hey jmontgomery, follow the advice of greatsnipe, it really
    does work. I had the exact same problem as you, couldnt get neither
    flash nor shockwave to work, but the link grapesnipe listed really
    does work.....for my flash anyway. Now if i could just get my
    shockwave player to work..........
    How weird! Its just vice-versa on how my problem get fixed. I
    had problems with both my flash/shockwave plugin, now my shockwave
    plugin is working but still, I'm having problems with my flash
    plugin. Now what?

  • Flash slows FF with hangs and 'not responding' messages.

    Shockwave flash is causing hangs giving 'firefox is not responding' message and slows my internet experience. I know its the flash add-on because when i disable it, firefox performs much better. I've tried all the suggestions concerning flash problems on this site and nothing has worked. I am running win 7 64 bit (home premium). plus Firefox 36.0.1. All drivers appear to be up to date but i will double check.
    my question is.... is there a way to easily disable/enable flash w/o going into the add-ons manager? Depending on what i'm doing, i'm in add-ons manager to either enable it when i need it or to disable it when firefox is slow and hangs.
    I've gotten to the point where i just open add-ons manager in a tab and leave it open because i know i'll probably be in there turning flash on or off depending on how its effecting my machine.
    Also, i tried running flash in 'ask to activate' mode, but you have to reload the page so it can find the add-on.
    This problem has been ongoing for a couple of months now; Firefox performance used to be so much better but this problem doesn't seem to be getting resolved. I like firefox, I really don't want to go to another browser.
    Thanks,
    Duke

    Hi Duke, your bookmarks and other Firefox data actually are in the C:\Users folder so it's safe to delete the folder under C:\Program Files (or C:\Program Files (x86) on 64-bit systems).
    When you run the installer again, it should detect and use your previous settings folder. To get a clean start on that as well, you can:
    '''Create a new Firefox profile'''
    A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should come with completely fresh settings databases and a fresh cache folder.
    ''This does not replace your existing setup; the new folder exists in parallel with your current settings.''
    Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
    firefox.exe -P
    ''Don't delete anything here.''
    Any time you want to switch profiles, exit Firefox and return to this dialog.
    Click the Create Profile button, assign a name like March29, and ignore the option to change the folder location. Then start Firefox in the new profile you created.
    Does that work any better?
    Note: When returning to the Profile Manager to switch back to your normal profile, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

  • Problems with Adobe Flash Professional CC (CS6 too) to save animated .gif file or perfect .swf file

    Hello,
    I have a problem with Adobe Flash Professional CC and CS6 to save animated .gif file. Here is very simple work with logo. But I can't save a perfect file swf or gif and it's so bad news for me. Logo .swf file save with bugs. Bugs just see then file insert in freeshop page. Here is just example test page, it let you see logo bugs - http://tagraseshop.graphicsrim.eu . Here is real page, but it's not my, it's freeshop with old logo and I have corect it - http://www.tagras.lt
    Animated .gif file absoluted not saved in Flash CC. Just gif picture. And why? My os Windows 8.1 .  Indeed I try to save on Adobe Flash Professional CS6. It's not save too...
    Gif "animated" - https://mega.co.nz/#!D8pEVaRR!Gjg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT LK4
    Swf with bugs - https://mega.co.nz/#!jo5lSRyS!1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ
    Fla - flash document - https://mega.co.nz/#!C94nCDSS!7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA
    Perfect animation speed is here - http://e-shoptagras.graphicsrim.eu
    Who can help to me?
    Any ideas?
    Thanks for your help in advance!

    Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
    And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
    In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
    All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
    I need help! Please!

  • Problem with two of my business rule triggers

    Good morning every one,
    I have a small problem with two of my business rule triggers.
    I have these tables:
    pms_activity
    csh_cash
    csh_integrate_leh
    csh_integrate_led
    and my process goes like this:
    upon approval of a row in my pms_activity table I have a trigger that insert a row in my csh_cash - and in the csh_cash table I have a trigger that will insert in the csh_ingerate_leh and csh_integrate_led.
    my problem is pms_activity does generate a row in csh_cash but the trigger in the cash does not fire to generate a row in the csh_integrate_leh and led tables.
    I have generated in the following order after I created my business rule:
    I have generated the table from the designer (server module tab)
    I have generated the CAPI from the head start utility
    I have generated the API from the designer
    I have generated the CAPI from the designer
    I have run the recompil.sql
    I have checked that my business rule trigger is enabled and should run on insert and no where restriction
    === this is my business rule logic ======
    l_rule_ok boolean := true;
    begin
    trace('br_csh001_cev (f)');
    csh_gl_pkg.csh_gen_integ_jvs(p_id
    ,p_ref_num
    ,p_own_id
    ,p_trt_id
    ,p_value_date
    ,p_description
    ,p_amount
    ,p_cur_id
    ,p_gla_dr
    ,p_gla_cr
    ,p_gla_pl
    ,p_gla_rev
    ,p_gla_eqt);
    return l_rule_ok;
    exception
    when others
    then
    qms$errors.unhandled_exception(PACKAGE_NAME||'.br_csh001_cev (f)');
    end br_csh001_cev;
    ==== end =======================
    Any help will be appreciated as I have struggled with this for two days.
    Thanks

    hmmm...
    Try resetting it again and restoring with the same backup file...
    Does the phone work properly once you've reset it before you try restoring? A lot of people here have experienced problems restoring from backups... could be worth forgetting about it and starting from scratch.
    You could try contacting your nearest Nokia Service Centre (www.nokia.com/repair) and see if they can do anything - it may need the firmware reinstalling or upgrading... possibly... give them a call though and see.
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • Problem with create universe on Business Objects XI 3.1 base on SAP Query

    Hello,
    I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
    The problem is hierarchy. Massage on Busines Objects is :
       OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition  "HIERARCHY NOT FOUND" raised.(WIS 10901) 
    Query in BEX run OK.
    Best regards.
    Ela.

    Hello,
    Thanks for response.
    When I run BEX QUERY, all works OK.
    All hierarchies was created and activated  on system BW.
    This situation appears after upgrade BW to SAP NetWeaver 7.3.
    Before upgrade I created universe without any problems.
    Regards Ela

  • Have serious problem with my flash player

    Hello,
    i will start with my computer detail and program detail:
    Os: Windows 7 64bit
    Internet Explorer: ver. 8.0.7600.16385
    Firefox: ver. 3.6.6 (Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6)
    Chrome: ver. 8.0.552.224
    Flash player ver. 10,1,103,20
    When i installed the windows 7 (date: 03.2010) and the other browsers i had used good with flash player and all working good, but after couple months i had problem with IE8 and with Firefox, The Problem is: couple sites i have streaming problem when i trying watch some clip or video (youtube working good) and i have problem with the flash player itself that I can not click on the buttons of Flash Player itself in a number of sites built on Flash, example: facebook - zynga poker aplication. BUT at Chrome browser is worked great with the streaming and with the clicking buttons... so i start using with the Chrome browser... But 3 weeks ago, My Chrome browser start do the same problem like the IE8 and firefox!!!
    i tried many things: i Uninstall plash player and install again - nothing!!
    i uninstall flash player and install flash player 9 and still - nothing!!
    i tought its problem at OS system so install (upgrade) the windows 7 and still - nothing!!
    someone can help me with that? I give up and i didnt Enjoy with Flash player like that
    Regards,
    Igal Meltser

    =O====== M/10.1.53.38 2010-11-22+20-17-42.303 ========
    0000 [I] 00000010 "C:\Users\jef\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\J82HM11E\flashplayer10_1_rc4_activex_050510[1].exe"
    0001 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
    0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0003 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
    0004 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
    0005 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash10h.ocx
    0006 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe
    0007 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll
    =X====== M/10.1.53.38 2010-11-22+20-17-49.120 ========
    =O====== M/10.1.53.38 2010-11-22+20-22-28.472 ========
    0000 [I] 00000010 "C:\Users\jef\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\3HEUMFML\flashplayer10_1_rc4_activex_050510[1].exe"
    0001 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
    0002 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash10h.ocx
    0003 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe
    0004 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll
    =X====== M/10.1.53.38 2010-11-22+20-22-36.506 ========
    =O====== M/10.1.102.64 2010-12-20+02-07-39.616 ========
    0000 [I] 00000010 "C:\Users\jef\AppData\Local\Temp\6F56.dir\InstallFlashPlayer.exe" -iv 0
    0001 [W] 00001015 C:\Windows\system32\Macromed\Flash\Flash10h.ocx 5
    0002 [I] 00000018
    0003 [W] 00001015 C:\Windows\system32\Macromed\Flash\Flash10h.ocx 5
    0004 [W] 00001015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll 5
    0005 [W] 00001015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe 5
    0006 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash10l.ocx
    0007 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil10l_ActiveX.exe
    0008 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil10l_ActiveX.dll
    =X====== M/10.1.102.64 2010-12-20+02-07-49.288 ========

  • I have a problem with adobe flash player

    I have a problem with adobe flash player.
    It is install but not running

    Try a fresh install of Flash after completely uninstalling it using the application Adobe Flash Player Install Manager, in the Utilities folder. Then re-download and install from ww.adobe.com
    If you are still having problems you could try installing Google Chrome as it has its own version of Flash built-in and doesn't require the separate installation of Flash.

Maybe you are looking for