Problem with "show isdn active " command AS5400

When i type "show isdn active " to see the actice voice calls , sometimes i dont se the calls , but my network management tool is showing me that there are active calls . I have check on the other side from where im sending the calls and i see the calls
Ewerything else is looking normal.
Details :
AS5400
IOS Version 12.3(4)T
Who knows what happens?
Thx , Cristi

May be due to the bug CSCea54139 which is fixed in 12.3(5.4) 12.3(5.5)T

Similar Messages

  • Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use  cmd+ r  when restarting. Is this the right way?

    Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r  when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

    Your Mac runs maintenance in the background for you.
    Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
    No idea why that was suggested.
    You may have a third party video player installed that's causing an incompatibility issue.
    Check these folders:
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
    To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

  • Problem with showing mp3 album art in list view.

    Hello.
    I have litle problem with showing mp3 album artwork in list view.
    In SNOW LEOPARD all work fine, and all mp3 files have album art's preview in list mode in finder.
    But in LION i have only default preview mp3 icon.
    Option "Show icon preview" is already on!

    I have the fix!!!!
    I have had the same issue ever since Lion. Its been very painful not having album art preview in finder or the play button when rollover the file for so many versions of OSX. Today I worked hard in trying to solve the problem since Applecare support hasn't helped much, all they did was tell me to bring the computer in. The other main reason I got so motivated to try and fix this is because the DJ app for Mac only reads album art from the finder even if iTunes can display the album art. The other reason that got me curious is that my friends macbook pro album art worked fine, so I cross checked with his computer until I figured out a few things that helped and ultimately fixed the issue. FINALLY!
    My set up:
    - I have my full iTunes library folder on my external as I have over 700GB of music.
    - It includes all my database files in there, which is very important as I have many playlist settings from over 7 years of iTunes activity.
    SOLUTION:
    1. With every new computer I have purchased, I use to just pressed option on Mac and press iTunes to locate my folder (which I have said is located on my external drive).
    2. I tried today to press option again BUT locate and selected the default library in the user/music folder of my internal drive (standard setting from Apple).
    3. Miraculously, all the album art appeared in both my external drive library and also today's downloaded songs on my Macbook pro. Ofcourse with the new default location I don't have any songs or data.
    4. So I tried to find a way to keep this library data on my internal drive since it can help the finder display all my files properly, yes even have the play on rollover button but as well link it back to my external drive with all my 700GB songs.
    5. I then went into iTunes Preferences/Advance tab and in iTunes Media folder locationredirected the location to my external drive iTunes/ iTunes Media folder. If it asks to collate data, press NO.
    6. Then I quit iTunes.
    7. Next I copied the 4 files to my desktop from my external drive as I want to keep the data I have made with all my playlists etc. The four files are iTunes Library Extras.itdb ,iTunes Library Genius.itdb , iTunes Library.itl , iTunes Library.xml
    8. I then went to my internal drive User/Music/Itunes/ and dragged these 4 files I copied from my external drive into here and making sure to REPLACE the four existing files already there.
    9. Next open iTunes and you will find all your presettings appear with all your music linked to your external. What this does is keep the important library files on your internal drive (that somehow makes your finder files album art appear), BUT to read also all the music mp3 files located in the external drive (action from step 5)
    Presto!! All your music files whether on internal drive or external all the album art has appeared.
    Hope this helps!! Let me know if there are any other questions.
    I am on 10.8.1 running retina macbook pro.

  • Restrict access to show isdn active

    I have a number of users which we only want to allow them to use "show isdn active". What would be the correct method to do this conisdering we use Cisco ACS for AAA?
    Thanks

    Use TACACS+ and command authorization. You will need to set up a generic command authorization set that allows all commands and one command authorization set that rejects any command except "show isdn active". You will also have to configure each network device to handle T+ command authorization.

  • Problem with installation and activation

    Hi, I have a problem with the installation of Adobe Muse.
    I had a free 30-days trial, when it was over I bought the product ($ 13 per month), 
    I installed the program again and I see the same window with the finished Trials
    and it requires a serial number and does not allow to enter the program.
    I installed the program on your PC wife without any problems, but I can not install it on a laptop.
    I have a laptop with Windows 8 operating system.
    What I've done:
    1. Uninstalled the free program,
    2. check the connection to the Internet,
    3. has installed a new program from the official website adobe.com,
    4. Remove the line for the activation of the hosts file and resave the file,
    5. turned off the brandmower,
    6. rebooted.
    I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
    Please help me at [email protected]

    I guess this stuff helps me
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
    thanx
    >
    2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
        problem with installation and activation  created by Prabhakar.Kumar
    >> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
    >> Adobe Muse CC* - View the full discussion
    >> <https://forums.adobe.com/message/6619532#6619532>
    >>

  • I have a problem with ALV Grid User Command?

    Hi Experts,
    I have a problem with ALV GRID User Command.
    I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I  created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
    Here is my code.
    FORM user_command_alv  USING u_ucomm TYPE sy-ucomm
                           us_self_field TYPE slis_selfield.
    CASE u_ucomm.
    WHEN '&IC1'.
    READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
            WHEN 'ORDER'.
              IF NOT wa_final-order IS INITIAL.
                SET PARAMETER ID 'COK' FIELD wa_final-order.
                CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
              ENDIF.
    endform.
    PARAMETER ID 'COK'  also the standard one.
    Could you please help me out, Where I did wrong?
    If I select any order, that order only should display.
    Thanks in advance.
    Regards,
    Sarayu.
    Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PM

    hi,
    Please check it once the Paramater ID is 'ANR' for IW33 order number.
    Hope this may help.
    Regards,
    Sravanthi

  • Problem with the product activation adobe acrobat 9 standard.

    I have a problem with the product activation adobe acrobat 9 standard.
    It is a failed hard disk to the pc and was not able to deactivate the license adobe.
    Now I replaced the hard drive and reinstalled the software but it tells me that all licenses are used.
    Is it possible to unlock the licenses in use?
    Thank you.

    Adobe can unlock licenses, this is a normal thing for them to do. You must contact them directly, there is no trick or other way.

  • Problem with output string to command

    hey i have no idea why this aint working
    its a simple output string to command.
    what it is supposed to do is make a new directory given by the input string
    e.g. mkdir /home/luke/dep
    thanks for the help
    //methods input save files
         saveFile = JOptionPane.showInputDialog("Save Files To : ");
         //method command for saving files
         //Stream to write file
         FileOutputStream fout;          
         try { Process myProcess = Runtime.getRuntime().exec("mkdir" + saveFile );
          InputStreamReader myIStreamReader = new InputStreamReader(myProcess.getInputStream());
          fout = new FileOutputStream ("file.txt");
          while ((ch = myIStreamReader.read()) != -1) { new PrintStream(fout).print((char)ch); } }
              catch (IOException anIOException) { System.out.println(anIOException); }

    What you fail to understand is that "aint working" and "Problem with output string to command" tells us absolutely squat about what your problem is. This is the same as saying to the doctor "I'm sick" and expecting him to cure you. As mentioned by Enceph you need to provide details. Do you get error messages? If so post the entire error and indicate the line of code it occurs on. Do you get incorrect output? Then post what output you get, what output you expect. The more effort you put into your question the more effort others will put in their replies. So until you can manage to execute a little common sense then the only responses you will get will be flames. Now is your tiny little brain able to comprehend that?

  • We have problem with showing warnings "Inline with Field"s.

    We have problem with showing error messages "Inline with Field"s.
    1. We have a package ERROR, that collects all errors/warnings. It has a procedure PUT, that saves errors in the variables of the package.
    Package ERROR
    procedure put(ptable in varchar2, pcolumn in varchar2, pcode in varchar2, pmsg in varchar2);
    end;
    2. We have a database table. Its values are validated by a trigger (saving business rules).
    If an error occurs, then the trigger calls the procedure PUT ( to save an error message).
    For example ...
    CREATE TRIGGER ...
    --- Rule 21
    if substr(:new.ka_kood,1,1) != :new.s_kat then
    error.put('TABLE1','COLUMN1', -20167, ' MESSAGE 1 !');
    end if;
    END;
    3. I have a form of HTML DB that updates the table TABLE1
    I want to show this error message with the field COLUMN1 (Inline with Field) .
    I need same validations before and after updating values.
    Before update - to validate same input; after update - to show errors saved in the package ERROR.
    I also tried to use the global variables. For example ...
    WWV_FLOW.g_validation_ids_in_error(1):= 192645056564169139;
    WWV_FLOW.g_item_ids_in_error(1):= 192644674113169137 ;
    WWV_FLOW.g_validation_message(1):='MESSAGE1';
    And this did not help.
    To rise errors in programs - is there same API ?
    Or there is some other solutions ?
    How can I do this in HTML DB?

    Andres,
    I'm not sure exactly what you are trying to do. But perhaps this will help some. If your after-submit process runs DML that causes triggers to fire, which result in error messages to be accumulated in package variables, you could create a branch on the page that would be conditional on the existence of error messages in the package variables. The branch could be back to the same page or to a more customized error page. The page you branch to would use the error messages in the package variables to determine how to format the page with the error text. The key to doing this is to run it all in the same database session. The way to do that is to use a "direct" branch, i.e., one that does not do a URL redirect. You create this type of branch with the Create Branch wizard (Branch to Page) and do not check the "Branch to page using redirect" checkbox when you see it.
    Be sure to roll back any changes you do not want committed before the branch.
    Using HTML DB global package variables for anything like what you described is not supported.
    Scott

  • Problem with showing caller information on E90

    I recently purchased an E90 and it appears to have a problem with showing the information of the caller (name) for those numbers that have been synchronized with Outlook 2003 or using Bluetooth from a Sony-Ericsson. The presentation of the caller information for the numbers that I have punched in manually works just fine.
    Does anybody have the same problem and if so what is the solution if it is a configuration issue as it sure sounds like a software bug..
    Regards,
    -mats-

    unfortunately the quick office solution bundled with the E90 is very much inferior to the ones found in the older communicators. you Must PAY to upgrade to a better version w/c to my mind is still inferior to the basic version found in the 9X00/i series communicators
    9110,9210,i,9500,9300,i,E90 I still miss my 9300i , E71, E72 But......

  • Having problems with using shift alt command when using the square tool

    having problems with using shift alt command when using the square tool

    Marco,
    If no good reason, such as the one suggested by Silkrooster, is present, you may try the list, hoping for one of the easy ones at the top.
    The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    If possible/applicable, you should save current artwork first, of course.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to at least 5 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
    https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • Tran.FBL1N - problem with showing correct amount regarding partial paymants

    Hello,
    Every day at my workplace I use transaction FBL1N which I use to see how much money I own to vendors and also to se how much is payed. However I have problem whit showing payed amounts for partial paymants (transaction F-59). For example:
    I own some vendor EUR 20.000,00 and I decide to pay him EUR 15.000,00 using partial paymant option (transaction F-59) because that's amount I have at the moment on my bank account. After that, when I choose that vendor using transaction FBL1N (with enabled option Open items on current date) so I coiuld see how much it is left to pay him, amount EUR 15.000,00 is not subtracted and reprt is still showing me that I own him EUR 20.000,00 which ofcourse is not correct.
    I also must note that in case I payed that vendor full amount I wouldn't have this problem and transaction FBL1N would show correct amount.
    I hope someone can advise me about this and help me solve my issue.
    Any help is appreciated and many thanks in advance for prompt replys.
    Cheers;)
    Adi
    Edited by: samnovice on Jul 18, 2011 1:22 PM

    thnx loky46, I understand it better now - I hva one more important question regarding this:
    Is there any way I can found total amount I own to one or more vendors (_regardless_ if it is full or partial paymant or combination of both paymants)? For example:
    Line 1 || VENDOR I || Eur 20.000,00 RE
    Line 2 || VENDOR I || Eur 15.000,00 AB
    TOTAL                     Eur   5.000,00
    but without using this option:
    you have to add the field "invoice reference" to your line layout and make a subtotal on it.
    Also, is it possible for line Eur 15.000,00 to become Close item because that part is payed and for rest of amount of Eur 5.000 to be Open item because is still not payed. I assume this can't be done but on this way I could now exact total amount of money which I own to my vendor(s) and it would be a of great help to me in every-day work.
    Thank you.
    Edited by: samnovice on Jul 19, 2011 3:26 PM

  • Problem with exexuting an OS command

    Hello!
    Our SAP System runs on Solaris. I want to move files from a directory in a subdirectory, similiar to this:
    from:
    /dir/file1.csv
    /dir/file2.csv
    /dir/file3.csv
    to:
    /dir/subdir
    I made an OS command with the SM69 and executed it with SM49. The command was:
    mv /dir/file* /dir/subdir
    Unfortanately it doesn't work. There's the message:
    mv: no access to /dir/file*
    return code 2
    If i execute
    mv /dir/file1.csv /dir/subdir
    it works, but that's not what i want.
    Has anybody an idea?
    Best wishes
    Georg

    Hello,
    I dont know exactly your problem why you want to do file*. But if your problem is finding the exact filename at runtime...and then move to some archive folder
    Try this
    Use GET_JOB_RUNTIME_INFO function module to get the exact file name and then you can do the move with the exact file name using external os command. Either you can use event raise or write an ABAP program.
    GSM.

  • Problem with SAP Script (Control Commands)

    Dear friends,
          I am facing one problem withg control commands. When i use <b>PROTECT.....ENDPROTECT</b> with <b>VAR type</b> window then it is not working instead i use with <b>MAIN type</b> window it is working fine. Another problem with <b>BOX command</b> when i use with <b>MAIN type</b> window then it is not working but when i use with VAR type window then it is working fine. SO i am little bit confused that is there any relation between control commands and window type?
    THanks & Regards,
    Bhavin

    Hi,
    There is no restriction to use any control commands on any windows.
    The SAP doesnt give any error, but the point of using Protect Endprotect in windows other than main window doesnt apply.
    Only main window carries from one page to another. So in order to print certain lines in a single page we use this control command.
    Regarding BOX command it works fine on any window.
    Thanks and Regards.
    Lavanya.

  • Problem with showing palette component which contains swing components

    hello, I have found a simple problem with jdeveloper IDE but this simple problem delays my project and it make late a big project so help me please. I want to add somes swing components to a JFrame
    but when I try to show the palette component as usual I didn't find the swing components like habit.
    Best Regards

    duplicate
    Frank

Maybe you are looking for

  • Error while deleting enhanced component

    Hi, i have enhanced the component 'ICCMP_BP_CP' and the view 'ICCMP_BP_CP/BuPaContactPersonCreat'. When we enhanced the component, it throwed me the error message that user is not authorized for sicf transaction. after getting the authorization, i en

  • NEW GL implementation Pre-Study

    Hello Experts, we are starting a Project to do a Pre-Study on Migrating to New GL. I request you all to provide some details From FI / MM / SD perspective what are the tasks / Prerequisites that i need to check before giving a Green Signal to start t

  • Hide some fields

    Hello all, I have a requirement to display or hide certain various fields depending upon the Transaction Type of my transaction in a custom application. As such we store the config ( to either display or show fields) in a custom table for each transa

  • Volume won't adjust on audio from MTS video audio line

    I can't get the volume to adjust like fade in on an audio track from an MTS video. Do I have to convert it to get the adjustments to work? I tested a sample narration and I could change the volume with key frames including fade in. I'm confused. -Dav

  • Keyboard shortcut for source patching?

    Is there a way to assign a keyboard shortcut to control the source patching? the same way you can toggle the track target.