Problem with Snow Leopard and LED Cinema Display + MacBook pro

I just upgraded to Snow Leopard. When I work on my MacBook Pro everything works fine. But when I use through the LED Cinema Display then the machine hangs on several programs, like iTunes, Time Machine, even Finder. Before the upgrade everything worked fine. Anyone having the same problem?

I've had similar problems when using my cinema display. I am currently using it with my usb backup drive disconnected and , so far, have not had the problems. Here's hoping, although it is not a good permanent solution, it means I do not have Time Machine running or access to my other backup files. I suspect that it may be a problem (as reported by others on this forum) with SL mounting a sleeping drive. Time will tell.

Similar Messages

Strange problem with Snow Leopard and Netware

Here is a strange one, but I am posting it here because I think it may have something to do with Apple software in Snow Leopard. I recently upgraded my Aluminum iMac to Snow Leopard, and have seen the following, rather puzzling behavior in the Prosoft Engineering client for Novell Netware. The symptoms are as follows. The server volumes mount OK, and I am able to see the files that are located on the server. In column view, when I select a file, I am able to see a preview of the file. Likewise, I can use Quickview to preview the contents of the file. However, when I try to drag a file from the server to my hard drive (any location), I get a dialog box saying I don't have permission to read that file. If I do a get info on the file, it says I have permission to read and write. For graphics files (such as Tiff, which have Preview as their default viewer), double clicking on the file causes Preview to open, but the file isn't opened. Now, what is really strange, if I use Photoshop CS1 to open that same file, it opens fine, and I am able to save it on the desktop, as usual. Likewise, if it is a Word or Excel file, they can be opened in their application, and saved on my hard drive. Does anyone have any idea as to what is going on, and how I can restore normal behavior?
Thanks in advance.

Unfortunately I don't know what's going on, but we're having the same issue at work on two Mac Pro machines. We installed Snow and everything's been running as good as before or better - except for this issue. One machine had a clean install and one had an update install, and both are exhibiting behavior identical in every detail to what you describe.
We've contacted Prosoft and they're looking into it; official word on their website is that Snow Leopard is fully supported.

Problem with MyBook Live and Time Machine on MacBook Pro

Hi,
I bought recently a WD MybookLive 2 tb.
The HD is connected to the modem and make backup from Macbook Pro 15 'with Time Machine.
Previously everything worked correctly, the Mac recognizes the disc and carried outregular backups, everything started to not work after the updates that were released by Apple on November 11 with software update - firmware on the My Book Live theMyBookLive 02.10.09-124: Core F / W
I get this error:
Time Machine can not complete the backup. The disk backup is not available.
Apart from Time Machine, yes, I use the MyBook Live, I load the disk where you are within the Public folders Shared Music, Shared Pictures, Shared Videos, and Software,I can easily copy files and copy them from there into to my computer - the My Book and'set a DHCP address.
Thanks

try this:
http://www.insanelymac.com/forum/index.php?showtopic=184462
or here
http://translate.google.com/translate?sl=it&tl=en&js=n&prev=_t&hl=it&ie=UTF-8&la yout=2&eotf=1&u=http%3A%2F%2Fwww.nervous.it%2F2009%2F09%2Fbackup-snowleopard-sha re-di-rete%2F&act=url

Problems with Snow Leopard and choosing startup disk.

I just installed Snow Leopard 10.6.3 on my external drive to test it out. Most things seem to work just fine, but I'm having problems selecting a start up disk from system preferences. When I bring up start up disk, I see the internal and external drives but they are greyed out and unselectable. How do I get back to starting up off of my internal drive? Is this a common problem?

Do try CT's suggestion first; that might be the most likely explanation.
In Disk Utility in Applications>Utilities, do you see both drives?
You might be able to get back into the Internal by starting up from Startup Manager. Hold the Option (Alt) key down at the startup chime. When that finishes loading, you should be presented with icons for both drives. If that succeeds, and you can return to the Internal, you can then see if the options in Startup Disk are available.
In Disk Utility, I would also repair the External, if and when you are booted back from the Internal.
And once you are booted back normally, highlight the mounted External Volume and do a Get info (CMD-I). Make sure "Ignore Permissions on this Volume" is unchecked.
Edit: as CT suggested, you should also repair Permissions, but -- and this may have changed in 10.6, not sure -- you should generally repair Permissions booted from the Volume you are repairing. Before repairing Permissions, however, on any Volume, you should first Verify that Volume. Repairing Permissions on a Volume with problems will only make those problems worse.
Message was edited by: WZZZ

Problem with Snow Leopard and file sharing

I mostly work at home where I have an 18 months-old intel iMac 24'' running Leopard and an older iMac G5 20'' (PowerPC) running Tiger. Besides, I have a three months-old MacBook Pro 17" in which I recently upgraded the system to Snow Leopard.
Before this upgrade I never had a problem with the sharing of files between the three computers (I have them connected via Ethernet and a 5-port D-Link router wich provides flawless internet connection to the three computers). However, after the upgrade it has become impossible to connect the MacBook to the iMac G5 or vice versa via afp. Besides, getting the MacBook to connect to the (Leopard) iMac 24'' is frustratingly slow in either direction.
A related problem is the fact that after the upgrade the portable is no longer capable of seeing directly my ethernet-connected laser printer (to one of the ports of the D-Link router) although... surprise! it does see it as a shared printer in the iMac G5 and this way it prints alright.
Any ideas or suggestions to explore the cause of or solve this problem are warmly welcome.
Emilio Faro

Same problem here, did you find a solution?

Problem with snow leopard and adobe reader

The United States Postal Service uses Adobe Reader to print labels with their "Click 'n Ship", a great service. I recently installed Snow Leopard on my Mac and I can no longer print labels with USPS Click 'n Ship. Applecare suggested I reinstall Reader (didn't work), or try with Firefox (haven't tried it yet). If this is a glitch, it will effect thousands of people who use USPS services. But maybe I just need a plug in, or need to make some change in the Adobe Reader Preferences. Any help out there in cyberland? ---Ken

Hi,
I have Firefox but mainly use Safari
I was also getting a blank page when I tried to open a PDF.
It seemsI that when I downloaded the update version of Adobe Reader, it switched off the "Read & Write" back to just "Read".
if you go and get information on a PDF or Adobe program (Command I), under "Open With" should say Adobe Reader App and at the left bottom where you'll see"Name" then below that,"everyone"-now just across you'll probably see "Read Only".(if you don't see this then go to step 5). This should be Read & Write so that Adobe Acrobat can create the Adobe Reader program to allow you to open and use a PDF.
If you have Adobe Reader 10.0 on your Apps, try going to step 5 below
1) Go to your user folder on your hard drive (ie: "lew").
2) Open Library/Application Support/ folder.
3) If there isn't an "Adobe" folder, create one now (go to File-->New Folder menu item) and name it "Adobe".
4) If there is an "Adobe" folder, right click on it and choose "Get Info".
5) Expand the "Sharing & Permissions" area at the bottom of the info window. (click the triangle) so that "system", "admin" and "everyone" appears.
6) Click the lock icon in the lower right of the window. Enter your password in the dialog that appears.
Now you'll see various choices you can make and "Read & Write" is open of them.
7) For your username (ie: "lew") entry under "Name", make sure it says "Read & Write" to the right of it. If your username isn't listed, make sure to the right of "everyone" it says "Read & Write".
Now Acrobat should launch properly when double clicked in the Finder as well as when viewing PDFs in Safari.
If this works please let me know

Problems with snow leopard and file vault

I just installed snow leopard on my macbook. When I try to log on, I get a message "your home folder is protected by file vault and didn't open, it needs to be repaired. To repair folder and continue logging in click ok." When I click ok, I get the message "You are unable to log in to the user account at this time. Logging in to the account failed because an error occurred."
How do you turn off the file vault if you can't log in? Any solutions are greatly appreciated.

Boot to safe mode by holding the Shift key on boot.
Then you can turn filevault off and reboot normally.

Problem with Snow Leopard and imovie

After spending hours putting together a movie in imovie, I cannot share it to media browser nor any of the other options listed under the "share" button. All the titles and transitions play in the project window, but will not play full screen. Any suggestions?

A "clean install", by definition, wipes everything already on your hard disc - including the previous version of QuickTime.
Snow Leopard includes a new version of QuickTime called QuickTime X.
You may find that putting back the previous QuickTime 7 lets everything run properly (QT 7 and QT X can both live happily side-by-side on the same Mac under Snow Leopard).
During an upgrade installation, instead of a clean install, SL may offer to leave QuickTime 7 on your Mac instead of wiping it; on a clean install it'll be wiped clean away.
QT 7 for Leopard is still available here, but whether it neatly installs after you've applied Snow Leopard, I don't know; you'd have to test that yourself.

Problem with Snow Leopard and FileVault after upgrading - how to solve it?

I recently installed Snow Leopard in my MacBook Pro, where I had FileVault running in my old Tiger. After installation and shutting down, it is now impossible to open and log in my user account. I get the message: "Your home folder, which is protected by FileVault, didn't open. It needs to be repaired." After clicking OK, it reads: "You are unable to log in to the user account "(my name)" at this time. Logging in to the account failed because an error occurred." What to do?

you don't have to reinstall. just enable the root account and log in as root. you can access your backup from there. see this link on how to enable root.
http://support.apple.com/kb/TS1278
use your snow leopard disk instead of leopard disk as that link suggests.

HT201250 I use Snow Leopard and tried restore my Macbook pro using Time Machine.

After waiting a considerable time for Time Machine to restore my whole system, applications and files I had problems in that my Macbook Pro would not restart. The Apple logo appeared but then the screen scrolled down and a lot of letters, numbers and symbols appeared - not making any sense, and a box appeared telling me to restart holding down the on button. This I did. However it kept on repeating. In the end I had to reinstall the whole lot. Fortunately I had backed up all my files. I cannot use some of the programs I have because I cannot retrieve them. I do not have a disk with them on to reload because I downloaded them from the net and they are old progs and still did what I wanted. A lot of files I have saved do not open now without the old system and apps.Can anyone come up with an idea?

ds store wrote:
Ah that's good to hear, does this still work if TimeMachine updates to reflect the 10.7 drive?
There is no special update. After installing Lion, Time Machine will do a normal "incremental" backup, of the stuff that's new or changed. That will be relatively large and lengthy, of course, since OSX and the default Apple apps will all be backed-up.
But there's nothing else different about the TM drive. It stil contains all the past backups, including older versions of OSX.
In other words if a user upgrades to 10.7 and doesn't like it after a few days/weeks, has TM connected and it updated to relfect 10.7, can the user c boot off the 10.6 disk erase and restore 10.6 from the TM drive?
Yes, except you don't have to erase.
You just boot from the Snow Leopard Install disc and do a full system restore. That includes erasing the destination, so it doesn't matter what's on it. Then everything on the backup is restored, including OSX, apps, users, data, settings, etc., just as it was at the time of the backup selected.
See Time Machine - Frequently Asked Question #14, especially step (g). The sample is a bit fuzzy -- it's a photo, since you can't screenprint there, but note that the last two backups were made on Snow Leopard:
Once that's done, and the system restarts, you can use the "Star Wars" display to restore selected items from later (ie, Lion) backups, but of course in some cases (Mail for one), the Snow Leopard apps won't work with the Lion-formatted files.

Problems with Snow Leopard and users

I have upgraded 3 x 10.5 iMacs to 10.6. They have been working fine for the last 2 months, but now have some strange problems on the units.
1. On the one, it cannot save documents on the iMac under that user. If I create another user, then that new user can save documents. Is there anyway to correct this. It seems like a permissions issue.
2. On the second unit it won't allow the user to convert documents with the MS OpenXML converter from 2008 to 2004 files. But if I create a new user, then that new user can convert the files.
3. And on the third unit, the user can't print certain documents, but guess what when you create a new user, that user can print the certain documents.
It seems like a corrupt user file somewhere that is specific to 10.6. Has anyone else had these issues?
I wanna check if there are any fixes before I start moving user data from corrupt accounts to new accounts. Maybe there is an easier solution.

Thanks for the feedback. Here's the second way.
While logged into the newly created admin account, backup the bad account's folder, delete the bad account, selecting the save data option (which is stored in /Users/Deleted Users/ as a disk image), recreate the bad account using the same username/password combo, log out and back into the recreated original account. If the problem's solved, open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it. Log out and back in to ensure there's no conflict and things still work correctly. Resolving conflicts or identifying corrupt plist files is a laborious process.

Solution for those having problems with Snow Leopard and drivers

I have posted what worked for me in several posts that other people had started, but because I feel I might sound repetitive and annoying, I am just posting it in this one for everyone. I hope it can be helpful. Best wishes for the year 2010
First of all, make sure you have made a SOFTWARE UPDATE before doing the following:
* Make sure your printer is connected and "on"/green light via your USB port (or other which will be recognised by your system)
* Go to System Preference
* Print & Fax
* Your printer will appear.
* Right click on the printer that is giving problems
* Reset printing system
* All printers will disappear
* Click on the + sign under this/these to add a new printer (I suppose you would have to do so for each one you have if you have more than one... not sure)
* In my case, the one that appear was 950c even though the one I have is 959. So, to make sure I would have something, I kept that, but then I click the + sign again.
* I selected the 950C, but then I checked on "PRINT USING".... THEN
* I had to "SELECT PRINTER SOFTWARE"
* I found it and that came where it said "Print using", but this time it was the right software.
* I renamed the NAME of the printer to be sure I would recognise it... LOL
I hope this is useful for all of you.

If a device is an All-in-One and can therefore scan, you will find that when the printer is added, the pane on the right hand side for that device will have two headings - Print and Scan.
If the device is just a scanner, then there will be heading of Scanners in the list on the left side. Printers will typically be listed at the top of this list.
Regarding click the + (Add), if you see Protocol, etc, then you have selected the IP icon at the top of the Add Printer browser. This is for networked devices using TCP/IP. To see devices connected to your Mac via USB, then you need to select the Default icon while in the Add Printer browser.
Note that if you don't see any icons in the Add Printer toolbar, then you have it hidden. To see the icons, click the oval shaped button on the right hand side of the Add Printer pane.

Epson R2880 printer driver problems with Snow Leopard

I’m running 10.6.4 on a new Mac mini and I’m trying to print to a new Epson R2880. If I let the system choose the printer driver in the print and fax utility, I get a sort of generic print dialogue box without many options, but it prints. If I go into the print and fax utility and manually choose the driver, I get a different print dialog box with all the appropriate print options. I checked and it matches the screen shots for this printer that are posted on the Epson site, so I feel sure this the correct driver. However, when I try to print with this driver, I get this error message. Error:/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents /MacOS/rastertoescpll failed.
This seems to be a common problem with Snow Leopard and the R2880 Epson printers, and it seems that most people are able to solve it by deleting the printer from the printer queue and resetting the printer queue. But that hasn’t solved my problem.
Here’s what I’ve done:
Manually deleted the Epson folder from the hard drive and trashed it, repaired disk permissions, uninstalled the Epson driver, updated software, downloaded and installed the Apple/Epson driver, deleted the printer from the print queue, and reset the printer queue. I’ve done all of these things several times over. And still I get the same error message every time I try to print from the driver with the print options. Does anyone have any other suggestions for a fix?

Some of the previous users had success when they restarted after deleting the /Library/Printers/EPSON and /Library/Caches/Epson folders. You might also try deleting the /Library/Cache folder. There is a solution posted from someone at Epson:
http://discussions.apple.com/thread.jspa?messageID=10909012#10909012
Substitute 2880 for RX580:
Make sure that you have completely removed the Stylus Photo RX580 driver, then install the new driver from System Update:
1. Power off the printer
2. Open System Pref. and Print/Fax
3. Highlight the RX580 printer
4. Click on the ""-"" sign
5. Close Print and Fax
6. Open your Mac's Hard Drive
7. Open the Library Folder
8. Open Printer and delete the EPSON Folder
9. Open the PPDs folder find the Epson Stylus Photo RX580.gz and delete the file
10. Close the PPD and the Printer folder
->11. In the Library folder, open the Caches Folder
->12. Delete the Epson folder
->13. Restart the Mac
14. Power on the printer
15. Click on the Apple Icon and System Update
16. Follow the directions to install the new driver
Hope this helps.

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

Problem with Snow Leopard 10.6.8

I recently faced problem with Snow Leopard 10.6.8, and my system started getting shut down before login screen appears. I contacted apple support,and they replaced my Logic board.
Now i am facing problem with track pad, and there is a huge degradation in system performance.
Neither, bluetooth and internet port is working.
Is that a known problem with 10.6.8 ? or does the people who worked upon replacing the logic board messed up something ?
they recommended me to re-install Mac OS which came along with system.
--Manish

Thanks for a super Quick response.
I have tried re-installing the MAC on top of the current installation 10.6.8 and, ( as system is so slow, it took around 5 hours for installation to complete ), yet the problem persisted.
Currently i formatted the Macintosh HD, and i am doing a fresh installation. Hope it does work .. ??
Else, i am not sure, what to go ahead with..
The person who replaced LB, had an external hard drive with 10.6.7 installed on it, when system was booted from that disc , the things starts working normally.
if after the fresh installation, problem persist, i will update.
Also, please let me know if you have some solution for this problem.
--Manish

Problem with Snow Leopard and LED Cinema Display + MacBook pro

Similar Messages

Maybe you are looking for