Problem with Software Instrument.

I'm having a problem with an external software instrument (Arturia Analog Factory). When I use it alone, it's sounds great and works fine, but when I assign it to a track in Logic, some of the pre-sets don't work. Basically, I can select about 90% of the pre-sets and play, record, etc. just fine. With some, though, they just make a clicking sound, and prevent Logic from producing any sound at all.
Anyone heard of this issue? Thank in advance...

Have you tried asking this (or looking for the same questions) on the Arturia support forum?

Similar Messages

Problem with Software Instruments

Hi. I enjoy using the software synthesizers in Garageband, but I've been having this really annoying problem. All too often, there is one stray note that plays after a region has already ended. I wish I could articulate it better; it's really bugging me. For instance, if I have a region that consists of the notes G-C-G-D-C, the program will play it as G-C-G-D-C-G, ending with my first note, like it's trying to loop the region but stops after only one note. Obviously this is a major problem since it screws up my bass and my whole melody. How can I fix this problem? Please help!

I'm not so sure what I did.
Heh, ain't that always the way.
Try both alternatives
Yeah, if anyone runs into this, I would be curious if both methods work.
I know I've mucked around and found myself ahead on the first note, and it not playing (so a simple move and shorten worked), but I've never seen the issue of an early note playing late as well, so I'm wondering if it's a similar issue or something completely different.

Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Playing real instruments with software instruments

Hey, I've been using logic for years but have never tried playing with a real instrument until now. When i connect my guitar Logic recognizes it and changes the driver to unknown USB device, but there is no sound since built-in input isn't selected and the instrument records but i can't hear it until i switch it back. How do you play real instruments with software instruments? Should be pretty simple. Thanks.
- Sean

Okay… the way Logic works is to use the same device for both Inputs & Outputs (there is a way round this, but let's not go there just now. First person to say 'Aggregate Device' gets thumped!).
So when you choose your device (usefully known as "Unknown USB Device") in Audio MIDI Setup, this means that you are no longer using your Built-in Inputs & Outputs — because that's the alternative.
Which means you won't hear anything through your speakers connected to your Mac. To hear an Output, you would have to connect your monitors/headphones/etc. to your device.
Furthermore:
_Auto Input Monitoring_
If Auto Input Monitoring is switched on, you will only hear the input signal during the actual recording—before and afterwards, you’ll hear the previously recorded audio on the track, while the sequencer is running. This helps you to judge punch in and punch out points when punch recording. If Auto Input Monitoring is switched off, you will always hear the input signal.
_To switch auto input monitoring on, do one of the following:_
• Choose +Options > Audio > Auto Input Monitoring+ from the main menu bar (or use the +Toggle Auto Input Monitoring+ key command).
• Control-click the Record button in the Transport, and turn on the +Auto Input Monitoring+ setting in the pop-up menu.

I have a problem with software activation of dedicated channel partners.

I have a problem with software activation of dedicated channel partners.
I find in the portal software and serial number for activation, but when I enter the serial (after you log in with the adobe id) tells me that the serial number is not correct.
Tednto contact Customer Support directly (via chat) but nothing ever done offline.
my adobe id is: [email protected]

Error "The serial number is not valid for this product" | Creative Suite
or contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html
i know you've tried adobe support, but if they can't help you no one here can help you unless there's some problem support can but won't handle.

Many problems with software activation with software purchased online

All:
In the last few weeks, I have had a lot of problems with software activation.
I purchased 10 copies of Office. 5 would not activate. I took the software back to the local as suggested by customer service, but was denied an exchange.
I purchased 7 copies of Adobe Photoshop elements. 3 activated, the rest did not.
What is going on? Can I get these replaced, refunded, or activated?
Thanks.

Greetings captainkeys,
That’s quite the amount of software to purchase! I’m sure you were quite disappointed to find that not all of the software codes seemed to be activated, delaying your use of the software. I’m glad you’ve reached out to us in multiple ways to see what options are available to you, and I apologize if we have been unable to find a resolution for you.
Using the email address you registered with the forum, I was only able to locate eight copies of Microsoft Office, and couldn’t locate any copies of the Adobe Photoshop Elements. That being said, I was able to see that some of the codes did fail to process through the activation process. I would be happy to look into getting these activated for you.
That being said, I am sending you a private message to gather further information from you. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

HT4993 problem with software update

I need help how to reslove problems with software update on my iphone 4s.

Reset your device and try it again: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss)
Also make sure you have enough free space on the device for the update file - usually requires 2 to 3 times the actual size of the file to be able unpack & install.

Visa problem with old instrument

Hallo!
I have a Problem with an old Jobin Yvon HR320 Monochromator which I try to access via VISA. Sadly I have no manual for the instrument. My task is, to convert an old VEE-Programm to Labview 7.0 using an agilent PCI GPIB-card. In VEE the monoc. is initialised with a string "248222 " which returns a B if not initialised yet. This works fine with LV. The next step is to send "O2000" as a string then, in VEE, Write Byte "0" and at last a blank. This should return a character "f". In LV I don´t know how to write the zero as byte. The VEE I/O busmonitor shows that there is a differenc if I write the zero as text or as byte. Maybe someone knows a solution for this problem?
Thanks
C.Kandler
P.S. I read a lot about the ni-spy, but I can´t find it in labview. Is there a posibility to download this tool?

C.,
a LabVIEW string is more like a Pascal string, rather than a C string.
To write binary data you should create a string constant or control, right-click on it and choose "'\' Codes Display" or "Hex Display". Now you can enter a null Byte as '\00' or '00' (without the quotes, of course), depending on what type of display mode you have chosen. The first mode ist easier to combine with normal printabel text, whereas the latter is better for binary strings.
NI Spy was installed here in C:\Program Files\National Instruments\NI Spy\NISpy.exe. It might be a component with higher level versions of LabVIEW, not with the base version.
But if you create probes you could as well debug your app without NISpy.
HTH and
Greetings from Germany!
Uwe

Backlight problem with software updat 1.1 for neno

the new 1.1 software update of 'iPod Updater 2006-01-10' for neno stuffs up the backlight. if i leave the light in always off or always on and try to use (press and hold) menu button to manually switch on and off the back light DOES NOT WORK any more....
apple pls fix it asap...

heres wats new with 1.1-
1. holding menu will take you to the main menu instead of activating or deactivating the backlight
2. lyrics and album art staying on screen and not disappearing after 10 seconds
3. Apple Radio Remote support
4. Line-out problem, occasionally when going from headphones to line-out, there would be no sound.
5. The 'Alarm' feature has been overhauled, easier to set the time, and a little bell icon is displayed next to the 'Alarm' menu item when it is set.
6. 'Screen-lock' has also been changed, slightly different interface, the numbers are in sunken boxes as opposed to the red glow. And a new warning is given telling you to hook your Nano up to your comp if you forget your code.
7. There was a problem with turning off, if you scrolled back or forward through a playlist/album, back to the main menu, sometimes it would not turn off.
8. The song title is in bold above the lyrics when you go to the lyrics screen
9. itunes opens almost instantly (within a second or 2) with the ipod showing. Before, this used to take 5-10 seconds, maybe more.
10. Reduced lag, before, when scrolling and clicking quickly through menus and songs, had some 'slow down', this is gone now.
11. Before the update I noticed a lag when I would skip songs, the next song would come on but the tags would have a slight lag on them and that has been fixed as well.
12. More accurate battery meter. Doesn't go down too quickly as it used too. One person said that it actually increases battery life after a testing.
13. When using the Universal dock with remote the backlight will come on after you change the volume, before the backlight remained off.
Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

Help! New 5th gen problem with Software version 1.2.3!

Just when you thought you havn't heard about enough problems with the new ipod software here comes a weird one. My Ipod still plays songs and the usual stuff. But the timer at the bottom of the screen that tells you how far you are into the song gets off track, slows down, and eventually starts ticking 3 seconds per 1 real second. And ill start hereing glitches and pauses in the music. And its every song it happens. Thanks for the help!

Hi,
I had the same problem. I upgraded my 30G to 1.2.2, and everything looked fine. However, when I disconnected my iPod there were no music or video files showing. But the hard drive space showing as Available under Settings>About>Available indicates that the hard rive space for my muic and videos is still being used. I read a lot of posts about 1.2.2 problems and 7.5 upgrade for iTunes being the fix. I would go to the Help tab in iTunes and tell it to check for upgrade, and it would tell me that 7.5 was avialable. I would click yes to download but nothing happened. I tried this many times, with my iPod connected, not connected, rebooting, etc, it was enough to go insane.
Here is how I solved it. I went to: http://www.apple.com/itunes/download/
and downloaded the entire iTunes 7.5 instead of the upgrade. After it installed itself, I rebooted, opened iTunes, and connected my iPod, it synced and now it is back to normal. Beware, if you try resetting your iPod, it warns that it will erase the contents of your iPod hard drive.
I have windows XP, hp laptop, and a 5th gen 30G.
Hope that helps solve your problem.

Having problem with software update

Hello,
I am having problem with reinstalling my software with Nokia Suite. It shows while backing up the data that phone memory is full. However already I have exhausted all the options for freeing phone memory.
I need to reinstall my software as my mobile phone is causing some problem.
I have Asha 305 phone. Kindly reply back if you could help me.
Regards,
Ayush Sharma

Hello @poochini21 ,
Thanks for replying.
The reason i wish to reinstall software in my cellphone because of 'deletion of certificates'. It shows a 'Certificate Invalid, Check date and time settings'. Furthermore, my nokia browser has restored to its default version. And the mail does not work.
Re backup: I am unable to create backup following the mentioned instruction, it again pops the memory issue.
I have already tried to reset my mobile, both the settings and the full reset, which at maximum saves me a free phone memory of 6.0 MB. Moreover I have also tried the option in Nokia Suite, 'Free some space'. That too could not help me out.
If you can help me out, kindly reply.
Thanks and Regards,
Ayush Sharma
poochini21 wrote:
Hi ayushmnit,
Just to clarify, the main reason why you'd like to reinstall the phone's SW via Nokia Suite is due to the memory full error that you're getting, is that correct? Do you also get the same error when creating a backup file using the phone itself? In your Asha 305, try going to Settings > sync and Backup > create a backup. A memory card is required to do this.
BTW, is resetting one of the steps you did to free more phone space? If the phone backup process succeeded, try resetting your phone by going to Settings > Restore factory settings. You can select Settings only to just restore the defaul settings, or Restore all to wipe out all your personal data which could free more space in your phone. After the reset, try reinstalling the phone's SW via Nokia Suite and see your Asha 305 will work fine afterwards.
Let us know how it will go.

Csa 6.0 problem with software deployment tool

Hi Guys,
I am having some problems with csa 6.0 and a software deployment tool called capainstaller, it resides on the client and picks up packages on some server shares and executes them from there, or copies it locally. We have added it to the class that defines mass software deployment like we did in 5.2, which works fine in 5.2, in 6.0 we are getting alot of applications getting put into @untrusted, for some reason. I can't figure out if i am supposed to make general exeptions for shares and local directories where the deployment tool reads its packages from ? In that case which classes should i modify, i am seeing alot of classification from the module called Security - Untrusted Content Classification, and this gives me alot of headaches.

Well, the Mass Software Deployment class, is where you are supposed to put marimba, in 5.2 this was fine, and worked for most of the installations i have done. in 6.0 the big break came when i found out that you can't use UNC network paths in a file set, it just doesn't work. If you put it is a literal straight in the same field as the altiris and sms are in the built-in rules, that works, maybe your marimba agent is also part locally installed and part gotten from the network like ours is ?

I have a problem with Software update

plemI have 6720c
i want to update it
after downloading 135mb of updates an error says
could not connect to the sevice
There seems to ve a problem with connecting to the service
make sure that your firewall and virus protecting setting is correct
..................... Etc
i have windows7 is the problem with the server or with something in my pc
I have tried also to download software for X3-00 but it has the sam pronlem .

@FireSword
Welcome to the forum!
You are not the only one to report issues updating today so perhaps there is a temporary technical hitch; perhaps try again in a few hours before messing with your existing installation.
Happy to have helped forum with a Support Ratio = 42.5

Problem with software update version 6.0 Bundle 2333 and email.

I'm having a problem updating my blackberry bold 9650 with the new service update that came out a couple weeks ago. I left the US for Germany about 3 weeks ago and a couple days after arriving the software update popped up. For whatever the reason, I am unable to load the new update. Neither the 3G service nor connecting to wifi allows me to complete the update. It keeps telling me it can not connect. Now I'm having a problem with my email all of a sudden, as the email icon has disappeared. Whenever I try to reset up my email (which it tells me I need to do) it says I have to do the software update first. Which puts me in quite the dilemma. Apparently no update = no email, which I can not have. Unfortunately I forgot to bring my computer cord to sync my phone, and I really do not want to have to wait until August when I get back to the States to update my phone and have email again.
Any help would be greatly appreciated. Thank you.

My assumption is that since you're not on the Verizon network currently and you don't have access to the network, you can't OTA the update.
And since you don't have the USB data cable, you won't be able to connect your phone to your computer to update. My best suggestion... Get a data cable. There should be someplace nearby you in Germany where you can get an inexpensive data cable.
Then go about backing up your phone with the desktop manager and then update via the DM as well.
No, you can't be on TV.
Yes, this camera is heavy..
Go bother the reporter...I'm busy!!

Compressor problems with software update

Software update has downloaded and installed once or more every day since last week thursday!
nothing works, the software update installs 2.01 compressor and QTmaster over and over again.
DVD Studio Pro is a mess...
How can I make software update wasting my time and bandwidth?
Message was edited by: Host

I was experiencing this same problem with the 3.02 update. It look like I was finally able to resolve it by manually downloading the compressor update and installing it instead of using software update. I only made the change today, but so far software update seems to recognize that I'm up-to-date.

Problem with Software Instrument.

Similar Messages

Maybe you are looking for