Problem with SQL,udfs & procedures
I have couple of problems with my database. Please suggest solution.
We are basically a web product With a Quite large Database
1. I am using functions both User Defined and Built in Functions in
SQL Statement. I want to optimize the query how do i do it.
why the usage of function in sql statements suppresses,the
usage of indexes internally. How to forceable make use of
the index even though function is used.
2. Whenver The Client makes a request to the Database server with a
Sql Query What are the steps we can take at the
client side to enhance the performance of the Query.
(i.e the Data Request ). How to optimize the usage of CPU at
client site?
3. what is the increase in the performance ration by having
separate table spaces for user data,system data and indexes.
4. Why the procedures are getting invalided
after some time. The procedure is
not getting executed at the front end.
Once the procedure is getting invalidated.
However even though the status of the
procedure is invalid the same is getting
executed at the back end.
Can anybody help me
Request for reply ASAP.
Regards
Koshal
null
1. In Oracle 8i, one can create function-based indexes, where instead of indexing a column, one can index upper() of that column.
2. Optimizing client performance is trickier. One can tune the queries being
submitted by the client, but if getting the first row back -- which is how response time is generally perceived -- set the OPTIMIZER_MODE parameter in init.ora to FIRST_ROWS.
3. There is minimal benefit to having data, index, rollback, and temp tablespaces all separated unless all the datafiles for each tablespace reside on different disks (data on disk 1, index on disk 2, etc). It's recommended regardless, but unless the files are on separate volumes, there won't be a great performance benefit.
4. A procedure is invalidated whenever DDL is issued against any object that that procedure depends upon. For example, if you add a column to a table, any procedures which reference that table will be invalidated. Any procedures which reference views which reference that table will be invalidated, because the view will be invalidated. It's best to run a compile script which looks for and attempts to recompile any invalid objects on a daily basis.
Adam
Similar Messages
-
Problem accessing Sql server Procedure from Crystal with JDBC driver
I have some Crystal reports using SQL Server procedures, most of them are working very well; however, I have 2 that have problems accessing sql server procedures. These reports are working using OLE DB connection without problem, but when I try to relocate the connection to JDBC Crystal generates an error like that the procedure not return records.
The procedure is working with other products including OLE DB connections from crystal.
What can I do?
Thanks in Advance,
JaimeCI am using:
Crystal report 11 - 11.0.0.1282 and Crystal 2008 = 12.0.0.683
SQL Server 2005 - Microsoft SQL Server Management Studio Express 9.00.4035.00
Windows XP
I have discovered that the procedures create and work temporary tables. In other cases when is working ok, the procedures have not working temporary tables.
Thanks,
Jaime Carrillo -
Problem with SQL connection and a Collection
hi all,
I have two problems with sql...
1. how can I assign the values of a resultset to a collection?
2. how can I close the sql connection, because when I close the statement and connection error shows me in the resultset
thanks!Hello Pablo,
RetrivingResults In Collection:
1) use getObject method, and assign it to collection.
Collection c_obj=new ArrayList();
while(rs.next())
c_obj.add(rs.getInt(Project_ID), rs.getString(Project_Name));
Closing ResultSet
2) The close() methos of ResultSet closes the ResultSet object, like bellow
ResultSet rs = stmt.executeQuery("SELECT a, b FROM TABLE2");
rs.close(); //Closes the result set -
What is the problem with this Stored Procedure
Hi ,
What is the problem with this Stored Procedure ?Why is it giving errors ??
CREATE or replace PROCEDURE getEmpName
*(EMP_FIRST OUT VARCHAR2(255))*
BEGIN
SELECT ename INTO EMP_FIRST
FROM Emp
WHERE EMPNO = 7369;
END ;
*/*You don't specify precision in procedure arguments.
(EMP_FIRST OUT VARCHAR2(255))should be
(EMP_FIRST OUT VARCHAR2)Since you asked what's wrong with it, I could add that it needs formatting and the inconsistent use of upper and lower case is not helping readability. -
URL problems with SQL Server Reporting Services 2012 with wildcard SSL certificate
Hi,
I have single server, domain member, with SQL Server 2012 SP1 Reporting Services.
I am trying to get work with url: https://reports.mydomain.com
I have valid wildcard certificate (*.mydomain.com) implemented and configured URLs in Configuration Manager.
https://reports.mydomain.com/ReportServer - works fine
https://reports.3pro.hr/Reports/ - I got error:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
In rsreportserver.config I have:
<Add Key="SecureConnectionLevel" Value="2"/>
When looking my ReportServerService_date.log file I have something like:
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
Also, error shown in log file:
appdomainmanager!ReportManager_0-2!4c50!03/10/2013-20:24:53:: e ERROR: Remote certificate error RemoteCertificateNameMismatch encountered for url https://localhost/ReportServer/ReportService2010.asmx.
ui!ReportManager_0-2!4c50!03/10/2013-20:24:54:: e ERROR: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
Btw, is there a way to delete/disable access using https://localhost and/or servername (not FQDN) since SSL will not work in this way for me, and I want access only by full url - https://reports.mydomain.com , not localhost ..
-- Hrvoje KusuljaI spent one of my 4 free support incidents with Microsoft (part of MSDN subscription) this year to get this investigated. The tech support person helped me through several issues but had to leave to attend some training, and I got past the last hurdle
before she called me back. Here are the steps that resolved this issue for me. I know for sure that step 5 was necessary. Step 1 may not apply to you, and steps 2-4 may or may not have been necessary (they didn't immediately fix the issue,
but I didn't roll them back either so they may have been necessary.)
Step 1:
Ensure you are editing the correct rsreportserver.config file. I had been making changes to a file that was installed in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\14\WebServices\Reporting, but that was a rsreportserver.config
file for some sharepoint integration that I'm not using. The correct path on my system was E:\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config, but yours may vary. If you can't figure it out, look in the registry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\MSRS11.MSSQLSERVER\Setup in the key named SQLPath, and then go to the ReportServer subdirectory of that path.
Step 2:
In rsreportserver.config, ensure that SecureConnectionLevel is set to the value 3. Was set to 0 in my configuration. Corrected line in your rsreportserver.confiog file should look like:
<Add Key="SecureConnectionLevel" Value="3"/>
Step 3:
In rsreportserver.config, add the correct value to the <URLRoot> element (which already exists in the file.) In my configuration, this value was blank. The value should be the fully qualified path to your report server, with a hostname that
is valid for your certificate. For example, if my cert matches *.mydomain.local:
<UrlRoot>
https://myserver.mydomain.local/ReportServer
</UrlRoot>
Step 4:
Ensure that your certificate exists in Trusted Root Certification Authorities in certmgr for the local machine. I had the certificate installed as a Personal certificate for the local machine, which I still think was correct (the certificate wasn't actually
the problem and worked correctly for Report Server, and the failure was caused by SSRS incorrectly making a https request to a localhost URL), but she had me remove the certificate from Personal and add it to Trusted Root Certificate Authorities. That
broke things and the cert was no longer listed as a cert I could bind to, so we then copied it so it existed in both Personal and Trusted Root Certificate Authorities. This is how I left it, not sure if that was necessary.
Step 5:
This was the fix that finally got things to work. In rsreportserver.config, add the same value to the <ReportServerUrl> element (which also already exists in the file) that you added in step 3. In my configuration, this value was also blank.
The corrected value should be the same as in step 3, for example:
<ReportServerUrl>
https://myserver.mydomain.local/ReportServer
</ReportServerUrl>
Then restart your report server (stop & then start in Report Server Configuration Manager), and the problem should go away. At least it did for me.
Good luck! -
Hi
I am using Flex to insert data through remoteobject and using
SAVE method generated from CFC Wizard.
My VO contains the following variables where id has a default
value of 0 :
public var id:Number = 0 ;
public var date:String = "";
public var accountno:String = "";
public var debit:Number = 0;
public var credit:Number = 0;
id is set as the primary key in my database.
I have previously used MySQL which automatically generates a
new id if I either omitted the id value in my insert statement or
use 0 as the default value.
However, now I am using MS SQL Server and the insert
generated this error:
Unable to invoke CFC - Error Executing Database Query.
Detail:
[Macromedia][SQLServer JDBC Driver][SQLServer]Cannot insert
explicit value for identity column in table 'Transactions' when
IDENTITY_INSERT is set to OFF.
Strange thing is that I dont see this problem with another
sample application. I compared with that application (it has the
same VO with default value of 0 for id) and everything looks
similar so I can't understand why I have this error in my
application.
This is SQL used to create the table:
USE [Transactions]
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
SET ANSI_PADDING ON
CREATE TABLE [dbo].[Transactions](
[id] [int] IDENTITY(1,1) NOT NULL,
[date] [datetime] NULL,
[accountno] [varchar](100) NULL,
[debit] [int] NULL,
[credit] [int] NULL,
CONSTRAINT [PK_Transactions] PRIMARY KEY CLUSTERED
[id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE =
OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON,
ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Has anyone encountered this problem before with insert
statements dealing with a unique id (with MS SQL Server)?Change "addRecords =
connection.prepareStatement("
to "addRecords =
connection.preparedStatement("
-BIGD -
Hi All,
While i am trying to connect to sql server through an applet it is giving an error in the java console
Ie SQLException: Connection refused :connect
i also tried with standlone application it is working fine then would be the problem with applet
Here is my driver
Class.forName("com.inet.tds.TdsDriver").newInstance();
DriverManager.getConnection("jdbc:inetdae7:SERVER:1433?database=abc","gin","gin");
How can i resolve this issue.
Thx & Rgds
VinCheck the permissions for your applet. Anuntrusted
applet(which it is by default) is not allowed toopen
network connections. That might be the cause. Butthen
you should get a SecurityException and not a
Connection Failed exception. Couls you pleasedescribe
the exception that you are getting.
Cheers
JaySome times it is giving access denied i.e.
java.net.SocketPermission error in java console
Try giving full permissions to your applet. There is a
exe file in the bin dir of the jdk installation which
does that(I forgot the name)
Here is the exact error msg which is displaying in java console
SQLException:access denied(Java.net.SocketPermission 127.0.0.1:1433 connect)
-vin -
Local Network Connection Problem with SQL Server 2008 R2
Hi,
I have CRM application which uses SQL server 2008. Weird thing is that I have no problems connecting from client machines to the server when using a particular router (via LAN) and when I upgrade the firmware of the same router (A common open source firmware
which is used by many also works perfect apart from mentioned problem) and restart the server, the connection cannot be established. I get Error 40.
When i downgrade the firmware and restart the server, the connection works again.
Please note that I am absolutely not touching any configuration of the server. Also the CRM software allows remote connections from public IPs which this feature works fine with both downgraded and upgraded firmwares.
As for my understanding, the routers do not block ports in LAN connections. So how can I diagnose the reason for this connection problem?Hi Leony83,
Please also help to check Windows Event Log information regarding this issue, so that we can do further investigation. In additin, here is the general steps to troubleshoot SQL Server Error 40 issue. Please see:
SQL SERVER – Fix : Error : 40 – could not open a connection to SQL server – Fix Connection Problems of SQL Server:
http://blog.sqlauthority.com/2008/08/24/sql-server-fix-error-40-could-not-open-a-connection-to-sql-server-fix-connection-problems-of-sql-server/
Hope this helps.
Regards,
Elvis Long
TechNet Community Support -
ODBC Problems with SQL Server 2012 on Virtual Machine
I am having problem with my application after my IT department upgraded to SQL Server 2012 with error "ConngetDataToModify.vi:1"<ERR>Object 0x2222222 is not valid. I have 4 servers running the same executable without problem before the upgraded. However, after the upgrade 2 of these Server are having the problem with the ODBC connection. Here are my setup, the application was created using LabView8.5, we have 2 physical server box running Window Server 2003, 2 Virtual Machine on Windows Server 2008, and a Virtual Machine with SQL 2012 Server. The 2 physical server running the executable without a problem after the upgrade, but the 2 Virtual Server were unable to connects to the ODBC connection. Anyone have any idea why this is happening , it is the problem with compatibility between my application with Server 2008 and SQL 2012 Server, or is there a problem with both beings Virtual Servers? As I said, the 2 physical Server seem to be running without any problem with the upgrade.
My guess is that the problem is not specifically with LV. This should be relatively easy to check if you create a UDL file and double click it. This opens a Microsoft wizard which allows you to configure and test DB connections (the UDL file itself is basically just a text file which holds a connection string). If it doesn't work there, it won't work in LV.
As for what the actual problem is, a common culprit is the firewall, which is easy enough to check by disabling it. Another option is the surface area configuration of SQL Server, which will not allow network connections unless you tell it to.
It should probably also be noted that LV 8.5 is not officially supported on Windows Server. I'm assuming that's not the issue, but be aware of it.
Try to take over the world! -
Hi,
I'm new to SharePoint 2013 I want to be able to query a MSSQL database from a SharePoint App I have tried to create an External Content Type (ECT) which is produced from a MSSQL stored Procedure, this procedure has several parameters which are needed to
filter the data correctly. From here I want to produce an external list which I can then query from a c# SharePoint app. If I leave the filters in the ECT null then the list is of course empty or if enter a default values the results are limited
for the app to query so are no good.
I want to dynamically pass values to the ECT when querying from the app, is this not possible. Should I just be returning everything in an external list and then letting the query in the app filter the data, this seems inefficient?
Is this the best way to do this or should I be doing this differently?
Please can someone point me in the right direction.
ThanksHi Pandra801,
When you create a the external content type, please try to add a filter based on your select statement.
http://arsalkhatri.wordpress.com/2012/01/07/external-list-with-bcs-search-filters-finders/
Or, try to create a stored procedure based on your select statement, then create ECT using the SQL stored procedure.
A step by step guide in designing BCS entities by using a SQL stored procedure
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/10/173-a-step-by-step-guide-in-designing-bcs-entities-by-using-a-sql-stored-procedure.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Problems with date in procedure on Oracle 11g
Hi gurus,
I have some problems with the date format on Oracle 11g.
Let me explain the situation:
When I am starting a request like
select to_number(to_char(to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'))
from sys.dual
I got as result 2009 as number.
When I do the same in a procedure of a package like this
my_year := to_number(to_char(to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'));
the variable my_year contains the value 9 instead of 2009.
Can someone explain me what's going wrong?
I have just tested with changing the environment variable nls_date_format for the session and for the complete database with no success.
Regards,
BjörnThank you all for your replies so far:
@Alex: You are right, using your short script in sqlplus gives me also 2009 as result
So, I am now posting the essential excerpts of the procedure because the whole one is to large:
function insert_szrl (my_fremd_name varchar, my_elementadresse varchar,
my_zeitstempel varchar, my_wert float,
my_status varchar, my_zyklus varchar,
my_offset integer,
my_quelle varchar, my_nzm_daten integer) return integer is
begin
my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
if my_zyklus = 'mm' then
my_zeitstempeldate := add_months(to_date(last_day(to_date(my_date, 'dd.mm.yyyy')), 'dd.mm.yyyy'),-1) +1 + (my_tageswechsel+1/24);
my_days := to_date(last_day(to_date(my_date, 'dd.mm.yyyy')), 'dd.mm.yyyy') - add_months(to_date(last_day(to_date(my_date, 'dd.mm.yyyy')), 'dd.mm.yyyy'),-1);
my_year := to_number(to_char(to_date(my_date,'dd.mm.yyyy'), 'yyyy'));
ptime.umschalttage_tuned (my_year, my_ws, my_sw);
end if;
While debugging the complete procedure I see since the start only a date which looks like '01.04.2009 07:00:00'
Edited by: user10994305 on 19.05.2009 15:58
Edited by: user10994305 on 19.05.2009 15:58 -
Performance problem with java stored procedure
hi,
i developped a java class, then I stored it in Oracle 8.1.7.
This class contains several import of other classes stored in the database.
It works, but the execution perfomances are disappointing. It's very long. I guess, that's because of the great number of classes to load that are necessary for my class execution.
I tried to increase the size of the java pool (I parameter 70 Mo in the java_pool_size parameter of the init.ora), but the performance is not much better.
Has anyone an idea to increase the performance of this execution of my class ?
In particular, is there a way to keep permanently in memory the java objects used by my class ?
Thanks in advance
bye
[email protected]
nullbefore running Java, the database session needs to be Java enabled; this might be the reason why it is taking so long. If this is the case, you should see an improvement in subsequent calls, once a database session is Java enabled, other users can benefit from it.
Kuassi
I have some performance issue with java stored procedure. Hope some one will be able to help me out. I'm using java stored procedures in my application and basically these procedures are used to do some validation and form the XML message of the database tables. I have noticed that when I call the PL/SQL wrapper function, it is taking time to load the java class and once the class is loaded the execution is faster. Most of the time is spent for loading the class rather than executing the function. if I reduce the class load time, I can improve the performance drastically. Do any one of you know how to reduce the class load time. The following are the platform and oracle version.
O/S: IBM AIX
Oracle: 8.1.7 -
Problem with SQL*Loader loading long description with carriage return
I'm trying to load new items into mtl_system_items_interface via a concurrent
program running the SQL*Loader. The load is erroring due to not finding a
delimeter - I'm guessing it's having problems with the long_description.
Here's my ctl file:
LOAD
INFILE 'create_prober_items.csv'
INTO TABLE MTL_SYSTEM_ITEMS_INTERFACE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
(PROCESS_FLAG "TRIM(:PROCESS_FLAG)",
SET_PROCESS_ID "TRIM(:SET_PROCESS_ID)",
TRANSACTION_TYPE "TRIM(:TRANSACTION_TYPE)",
ORGANIZATION_ID "TRIM(:ORGANIZATION_ID)",
TEMPLATE_ID "TRIM(:TEMPLATE_ID)",
SEGMENT1 "TRIM(:SEGMENT1)",
SEGMENT2 "TRIM(:SEGMENT2)",
DESCRIPTION "TRIM(:DESCRIPTION)",
LONG_DESCRIPTION "TRIM(:LONG_DESCRIPTION)")
Here's a sample record from the csv file:
1,1,CREATE,0,546,03,B00-100289,PROBEHEAD PH100 COMPLETE/ VACUUM/COAX ,"- Linear
X axis, Y,Z pivots
- Movement range: X: 8mm, Y: 6mm, Z: 25mm
- Probe tip pressure adjustable contact
- Vacuum adapter
- With shielded arm
- Incl. separate miniature female HF plug
The long_description has to appear as:
- something
- something
It can't appear as:
-something-something
Here's the errors:
Record 1: Rejected - Error on table "INV"."MTL_SYSTEM_ITEMS_INTERFACE", column
LONG_DESCRIPTION.
Logical record ended - second enclosure character not present
Record 2: Rejected - Error on table "INV"."MTL_SYSTEM_ITEMS_INTERFACE", column
ORGANIZATION_ID.
Column not found before end of logical record (use TRAILING NULLCOLS)
I've asked for help on the Metalink forum and was advised to add trailing nullcols to the ctl so the ctl line now looks like:
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
I don't think this was right because now I'm getting:
Record 1: Rejected - Error on table "INV"."MTL_SYSTEM_ITEMS_INTERFACE", column LONG_DESCRIPTION.
Logical record ended - second enclosure character not present
Thanks for any help that may be offered.
-TracyLOAD
INFILE 'create_prober_items.csv'
CONTINUEIF LAST <> '"'
INTO TABLE MTL_SYSTEM_ITEMS_INTERFACE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
(PROCESS_FLAG "TRIM(:PROCESS_FLAG)",
SET_PROCESS_ID "TRIM(:SET_PROCESS_ID)",
TRANSACTION_TYPE "TRIM(:TRANSACTION_TYPE)",
ORGANIZATION_ID "TRIM(:ORGANIZATION_ID)",
TEMPLATE_ID "TRIM(:TEMPLATE_ID)",
SEGMENT1 "TRIM(:SEGMENT1)",
SEGMENT2 "TRIM(:SEGMENT2)",
DESCRIPTION "TRIM(:DESCRIPTION)",
LONG_DESCRIPTION "REPLACE (TRIM(:LONG_DESCRIPTION), '-', CHR(10) || '-')") -
Problem with java source procedure
Hello everyone, I've set up a simple example that is supposed to create an fdf file on the server. I tested my program and it works fine.
Now I'm trying to do the same thing except that I would like to have my java code in the database. Here's what I've done:
# on database in opus schema
create or replace and compile java source named testpdf as
import java.io.*;
import com.adobe.fdf.*;
import com.adobe.fdf.exceptions.*;
public class TestPDF
public static void Test()
try
FDFDoc outputFDF = new FDFDoc();
outputFDF.SetValue("status", "En traitement!");
outputFDF.SetValue("Date", "01-01-2006");
outputFDF.SetValue("Name", "Alexandre Folgueras");
outputFDF.SetValue("Address", "12 Saratoga Ave");
outputFDF.SetValue("City", "Saratoga");
outputFDF.SetValue("State", "CA");
outputFDF.SetFile("/tmp/java_pdf/GenerateFDF.pdf");
outputFDF.Save("/tmp/java_pdf/alex.fdf");
catch (Exception e)
e.printStackTrace();
create or replace procedure pdf_doc
AS LANGUAGE JAVA
NAME 'TestPDF.Test()';
commit;
Everything seems to be OK by when I run it, my file does not get created even though I don't get any errors.
Anybody knows why?
Thanks in advance!Hello,
I'm also creating a class with static functions and putting it as a Java source in Oracle but I have problems with imports. In my case, I use MQSeries JAR files and when I put my code in Oracle, I have warnings "Java created with compilation errors". It's just about the lines where I create/use MQSeries objects, because when I comment them, I have no more errors.
I see you also use specific imports with PDF, so I would like to know where you put the JAR files so that the Java source can be compiled correctly.
Thanks in advance, -
Problems with sql developer and win 8 64 bit
Hi there,
It's my first time in this forum, I am a student programmer and I have many problems to install SQL Developer on Oracle Database 12c. I actually managed to install both, but I could not make them work. My question is SQL Developer works on the Windows 8 platform 64-bit?
I'm going crazy, help me please .... Thanks for a while!!!SqlDeveloper should have no problem working in Win 8, but i do not think it's a supported platform yet.
The Database could be a little more troublesome, if you only need a working database environment to make experiments you could find the "pre-built" Virtual Machines useful.
For Win 8 and 12c try using the EA release of SQLDeveloper 4, because if I'm not mistaken the current 3.2.2 could have some problems with 12c.
Maybe you are looking for
-
HI All, This is Pavani...Iam goin to attend interview this week...I hav no R/3 system installed in my PC...This is my first interview....Iam very nervy. I need ur help regarding tables n fields involved in the following reports. 1. Report to
-
Is there a fix for 10.9.3 GPU panic
Since the 10.9.3 update, my Macbook Pro keeps going into a GPU panic. Can someone please help with this? Anonymous UUID: DC66BD95-3A0A-B5EF-1917-EAB42E94CA74 Fri May 23 13:43:08 2014 panic(cpu 0 caller 0xffffff7f841f3f7c): "GPU Panic: [<None>]
-
How do I get rid of a document that appears on desk top?
A document appears on my desk top. How do I get rid of it?
-
Dear All, We have an external phase for our process order. As the result of which we have a purchase requisition associated with that phase which is later converted into purchase order. After we complete the whole process cycle and try to close the p
-
How can I force FCP to re-render video that's already rendered?
I recently bought a new Mac... actually it's a used Mac, but, well, you know, it's new to me! Anyhow, my "new" Mac is a 1.83 GHz Intel Core 2 Duo iMac, and my old computer is a 1.25 GHz PPC G4 eMac. They're both running OS X 10.4.11. I just installed