Problem with starting IWS6.0 after installing PHP

I recently installed php40 with IWS60 running on sparc sol8. When
starting webserver from either command lines or admin panel, the server
failed to start with the following errors:
start failed. (2: unknown early startup error)
iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
failure: server exit: status 1 (Interrupted system call)
Error
An error occurred during startup.
The server https-dhcppc0 was not started.
Looking at error logs, these are the following errors:
info (18731): successful server startup
info (18731): iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
security (18731): Temporary directory /tmp (specified by the TempDir
magnus.conf directive) is not owned by the server user. This is a
potential security hole. Please change TempDir or remove the directory
and restart the server.
Ok - now I look at /tmp folder and its owned by sys and group sys. In
addition, I went in and look at magnus.conf file and there is a line of:
TempDir /tmp/https-dhcppc0-ab0d7966. I deleted (remaned to something
else) that file in /tmp folder but still getting the same errors.
Could someone help to tell me what going on with these errors which
prevented the server to start.
Thanks
Paul

The error is pretty explicit about wha tthe problem is.
Look at the /tmp/https-dhcppc0-ab0d7966 directory. What are it's
permissions? They should be 700 for the UID iWS runs as. Here's mine:
[foobar@www /tmp]$ ls -ld /tmp/https*
drwx------ 2 root root 1024 Sep 19 16:46 https-admserv
drwx------ 2 nobody nobody 1024 Sep 19 16:49 https-www
Super-User wrote:
>
I recently installed php40 with IWS60 running on sparc sol8. When
starting webserver from either command lines or admin panel, the server
failed to start with the following errors:
start failed. (2: unknown early startup error)
iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
failure: server exit: status 1 (Interrupted system call)
Error
An error occurred during startup.
The server https-dhcppc0 was not started.
Looking at error logs, these are the following errors:
info (18731): successful server startup
info (18731): iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
security (18731): Temporary directory /tmp (specified by the TempDir
magnus.conf directive) is not owned by the server user. This is a
potential security hole. Please change TempDir or remove the directory
and restart the server.
Ok - now I look at /tmp folder and its owned by sys and group sys. In
addition, I went in and look at magnus.conf file and there is a line of:
TempDir /tmp/https-dhcppc0-ab0d7966. I deleted (remaned to something
else) that file in /tmp folder but still getting the same errors.
Could someone help to tell me what going on with these errors which
prevented the server to start.
Thanks
Paul--
Joe McCabe ... bleakness ... desolation ... plastic forks ...
House O' Mozilla

Similar Messages

If you have problems with Apple Apps after installing Mavericks

I had a problem with Apple Apps after installing Mavericks. They would bounce in the dock but never open. The problem apps I had trouble with were CALENDAR, MAIL, and even APP STORE. I am guessing it has to do with permissions when setting up via iCloud. Here's what I did to make my apps work again after the update:
Restart computer, then immediately hold down OPTION so you can start from the 10.9 RECOVERY DISK.
Run DISK UTILITY, then run REPAIR DISK, then run REPAIR DISK PERMISIONS.
After this, RESTART, then hold COMMAND OPTION P R at the same time until your computer restarts three times.
After it boots up, the apps began working like they should have.

That's where your questions about Lion should be posted.

HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update. Have there been problems associated with this update ?

I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

Problem with sync-cds after installing Patch 115614-26

Hi,
We are in the process of patching the machines in the cluster from 5.2 p2 to p4 on Solaris 9.
After installing 115614-26 (System Directory Server 5.2 patch 4) the process is to start up slapd and run sync-cds to synchronise the updates. We're seeing authentication failures at this point and can't work out what the problem is.
# /usr/sbin/mpsadmserver sync-cds
Admin Id: cn=directory manager
Admin Password:
Error: Ldap authentication failed (147:Unknown error.).
Do you want to try again ? [y/n]: #
The sync-cds process breaks back to the bash prompt after entering the password rather than asking for another go. If a false cn is given the same error number is given yet we're allowed to have another try.
# /usr/sbin/mpsadmserver sync-cds
Admin Id: cn=false
Admin Password:
Error: Ldap authentication failed (147:Unknown error.).
Do you want to try again ? [y/n]: y
The authentication details are correct as we're able to authenticate with the console on the other machines in the cluster using the same details.
No errors are shown in the slapd logs. Does anyone have any ideas?
Many thanks,
Robin.

use :
export NSS_STRICT_NOFORK=DISABLED
before starting the directory and admin server.

Problem with another application after install Adobe Illustrator CC 2014

Hello, I write you because we don't know how to fix this problem.
We've encountered a problem after install that software in our corporative computers, for some reason the default font of Lotus Notes changes after install Adobe Illustrator.
It changes Calibri font by The Times New Roman font. Those problems have been detected in the 100% percent of tests made. (Uninstalling Adobe and/or Lotus, installing the software in many PCs and suffer the same issue).
There is a compatibility problem between those programs ?
Thank you in advance for your help.

d,
I am afraid Illy is reluctant to recognize Calibri as a (proper high quality) font and therefore replaces it whenever she comes across it.
Have you had the same issue with the original CC or even earlier?

Problem with external HDD after installing updates in Mac os X 10.5 leopard

Hi,
I just went out to the store and bought a copy of the leopard.
I installed it with nothing attached to the computer. Everything went fine.
When I went to update the software I had two packages there that I updates, so I had to restart the computer. when it started again it indicated that it had problems with my Iomega Ultramax 1tb disk. It says that disk repair failed and that I only have limited access to the disk. and since it's ALOT of data on the disk, I don¨t rally got the tools to copy everything to another location and then erase the disk and copy everything back. So does anyone know if there's a solution to this.
I'd be really happy to get a solution on this,
thanks alot.
Rich

When I'm using disk utility and use "verify disk" I get the following message:
"First Aid failed
Disk utility stopped verifying "UltraMax" because the following error was encountered.
Filesystem verify or repair failed."

Web Sharing Not Starting Up After installing PHP

On Mac OS 10.4.9 on a G4 PPowerbook, using O'Reilly's "Learning PHP and MySQL," my Personal Web Sharing will not start up.
I enabled Apache per their instructions and things seemed fine.. Then I i installed PHP with these commands, sudo vi/etc/httpd/httpd.conf , then %s/#LoadModule php/LoadModule php/. Then %x/#AddModule php/AddModule php/. Then <espcape>:wq. Then
vi ~/Sites/test.php
o
<?php phpinfo() ?>
<escape>:wq
First of all, the test query from the book didn't work quite right, but now my Personal Web Sharing won't start up. It says "starting up." forever.
Help. And if you can't tell, I have extremely limited knowledge of Unix and command lines, etc.
What do I do? Assume I know nothing... : )

The first thing to do is read the Apache error log which will give you more detail about what's gone wrong.
<pre class=command>tail /var/log/httpd/error_log</pre>
The other thing to do is run configtest which might also indicate errors in the configuration:
<pre class=command>sudo apachectl configtest</pre>
although it'll probably tell you the same thing as the error log.

ILife '09 - problems with spotlight preferences after install

+I also posted this over in the iLife forum, but had to post in the iPhoto topic because Apple doesn't have a general iLife topic. Posting again here because the issue is more directly related to spotlight, I just think iLife '09 install had something to do with it.+
Installed iLife '09 on 3 machines yesterday and all are having issues with spotlight prefs. Here's a general idea:
1) Installed iLife '09
2) Forced reboot after install
3) After reboot, spotlight shortcut (cmd+Space) still working. However getting into spotlight preferences often crashes the preferences pane. If the pref pane loads, spotlight preferences showing odd settings:
http://i379.photobucket.com/albums/oo233/netnothing/Picture1.png
Notice the missing items in the list as well as the missing shortcut keys for spotlight.
4) After a second reboot....spotlight shortcut key no longer assigned. Going into spotlight prefs doesn't save the prefs. HAve to go into Keyboard & Mouse to reset and save the spotlight shortcut keys.
5) Still have the issue of the missing items in the spotlight list.
Looks as if something with installing iLife '09 has messed with spotlight preferences.
Anyone else see this same behavior?
I have tried:
- permissions repair
- verify disk
- trash spotlight prefs
None helped. Again, this EXACT thing happening on all 3 machines, so I think it's related to the iLife '09 install.
-Kevin
Message was edited by: netnothing

I am looking to purchase a new macbook, are you saying, with the software included, I should immediately check for software updates for iLife 09, since it is stated on apple store that it will be included with my mac, in order to make sure spotlight words properly?

Problems with starting Windows after Boot Camp was installed on a Win-PC

Hi,
i have a very interesting problem for the MacComunity (haha -.-). The problem is: after I have installed Boot Camp from my Snow Leopard DVD on my Windows PC (not my iMac); I can not start the system. In the Boot Camp System where i can set the system to start with, there was only the Boot Camp System available (not Vista). However, the system installs some Vista-Updates and some Updates from Apple Software Update (iTunes 9.2, Quicktime 7, Safari 5, Airport 5, Boot Camp 3.1) on my PC.
Everything was all right but after I have restarted the System nothing happend. the System freezed when the boot-Screen (Intel Logo) appears. The Systemkeyboard was not detected. It only detects a n external apple Keyboard. There are some reactions when I press the keys, but the Monitory is frozen, anyway. What can I do?

Sounds like a lesson in there: don't wait to put OS X on an external drive that is usually off line.
Rush to a store or on-line and get a UPS of the 1500VA sort (APC RS would be nice, or SMART UPS 1000VA).
The directory of the drives could be corrupt.
I have all my equipment, modem, routers, the works, but we had a bad storm and one port on the router/modem is out (the one I used, the modem seems to be okay) and I am worried that the UPS's line filter for DSL in is also 'compromised.'
Storms and power outages can wRECK or cuase havoc.
It sounds like you need to map out bad sectors maybe (zero all in Disk Utility) perhaps. The directory, volume blocks, or even journal file, got scrambled. However, because no test can find it means - to me - it could be the "non user partitions" rather than OS X partition etc. Hence, zero the drive or just reformat it in full.
Why have you not ever with these outages, just continued to live w/o one? I wouldn't just shutdown, I would unplug if a storm approaches.
PS: SMC Reset button is under drive bay #4. Give it a 5-10 seconds depress.

Problem With Conexant HDAudio After Installing x86 Vista SP1

I didn't want to start a new thread, but it seems my problem is very unique.
When first installing Vista x86 my Speakers/Headphones worked great. After Vista SP1 installed, my Speakers/Headphones went silent yet the driver was still there and functioning properly. I uninstalled the driver, and let Windows auto-install another driver. (No Rollback was available) I was able to get sound from my Speakers. Speakers are the only thing that work whether I plug into the headphone jack or not.
While plugged to the headphone jack I test the Headphone device in Playback Devices and get nothing through the headphones.
HP support's drivers only mute my speakers while making my headphone device in playback disappear. Same with updating the driver.
I like to use this as a TV computer and would like sound from the TV via the headphone jack.
I have searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
Hp pavilion dv6748us
Conexant Audio
Hardware IDs:
HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CF&REV_1000
HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CF
This question was solved.
View Solution.

Glad to here it working
Not sure on your model but on dv2000 models I worked on I was able to replace the headset jack board by removing all screws from lower casing, removing rear button panel then just lift front palm rest & have easy'ish access to jack board 2 screws & ribbon connector.
Hope your jack board lasts a while ...
Like my post? Click Kudos (thumb+) to show appreciation.

Problems With Starting Up After Power Failure

Hi Everyone,
I'm having the strangest problem booting up (or rather, not being able to boot up) after a power outage in my neighborhood last night. What's more, it's the second night in a row that it's happened and has blocked my ability to boot into my two main drives. I installed OSX on a separate internal drive so that I can access them and they seem to be all right and have all the information on them which is good.
Here's what happened: Two nights ago my computer was on and we had a power outage which turned my computer off, of course. I don't have it set to restart after something like this so I tried to restart it in the morning. The blue progress bar makes it about a quarter of the way across and stops. I have the same OS on another drive so I started up with the Option key and chose that and everything was fine. However, the next night the exact same thing happened and I couldn't boot into that drive the following morning either so I had to install a fresh version of OSX on another drive just to get into my computer. I've used Drive Utility, Drive Warrior, Drive Genius and TechTool Deluxe to check the drives and they all say there's nothing wrong. I've tried to reset the PRAM but still can't boot up into those drives which were on when we had the outage. I have unplugged everything and nothing else in the house seems to be effected. Any suggestions? I've had many power outages over the years with my Mac on but never have I ever experienced something like this, and on both drives too! As always, any help will be greatly appreciated and needless to say, I'm turning my computer off tonight before I go to bed!

Sounds like a lesson in there: don't wait to put OS X on an external drive that is usually off line.
Rush to a store or on-line and get a UPS of the 1500VA sort (APC RS would be nice, or SMART UPS 1000VA).
The directory of the drives could be corrupt.
I have all my equipment, modem, routers, the works, but we had a bad storm and one port on the router/modem is out (the one I used, the modem seems to be okay) and I am worried that the UPS's line filter for DSL in is also 'compromised.'
Storms and power outages can wRECK or cuase havoc.
It sounds like you need to map out bad sectors maybe (zero all in Disk Utility) perhaps. The directory, volume blocks, or even journal file, got scrambled. However, because no test can find it means - to me - it could be the "non user partitions" rather than OS X partition etc. Hence, zero the drive or just reformat it in full.
Why have you not ever with these outages, just continued to live w/o one? I wouldn't just shutdown, I would unplug if a storm approaches.
PS: SMC Reset button is under drive bay #4. Give it a 5-10 seconds depress.

Problem with starting database after aborting backup

Hello,
I have following problem. I tried to do my first backup with EM. I switch my database to ARCHIVELOG mode then set location for archive redo logs to recovery flash area. Then EM asked me to make a backup. I accidentally clicked button refresh. After that I had to click "ok" few times and when I wanted to start database again I had a problem.
EM shows "Enterprise Manager is not able to connect to the database instance" and Agent Connection to Instance issues ORA-12528. I tried LSNRCTL>stop and LSNRCTL>start but it didn't resolve my problem.
In SQL Plus I can open the database but I can't mount it.
Any ideas???
I'm using Oracle 11.1.0.6.0.
Best,
Simon

In SQL Plus I can open the database but I can't mount it.This statement makes NO sense.
In order for the DB to be OPEN, first it needs to be able to MOUNT it,
using sqlplus along with CUT & PASTE show us what you do & how Oracle responds.

Problems with external/usb after installing new hard drive

After having a new hard drive installed (from Mac 10.5.2 to 10.6.8) I have experienced 2 problems so far:
1. I am getting no response (from anything connected from my usb port) ie. mouse. But plugging in the mouse directly into the mac works fine.
2. After a few minutes, the sound from my production speakers (connected: macbook->usb cord->sound card-> production speakers) starts to skip and then no sound at all, however my soundcard is still working as I see the light is on.
Can anyone let me know how this can be fixed? I never had these problems before getting the new hard drive.

try doing a PRAM/NVRAM reset.......
that might sort out your issues.......
good luck.....hope it works for you...

Problems with USB devices after installing X

I have installed an X-Fi Elite Pro on an SB8P Shuttle box running XP Home. I also use this PC for TV capture, and use a Hauppage WinTV-PVR-USB2, which is an outboard encoder. Previously, I had an Audigy 2 SZ. I was using this set-up for about 8 months with few problems.
Since adding the X-Fi card, I can no longer install the Hauppage card into any USB slot. I sometimes get a strange error message from Windows saying that I would get better results plugging the device into a USB 2 slot. Apart from that, the drivers do not install.
This message is very puzzling - all the USB slots on the PC are USB 2, and there are no USB errors appearing under hardware properties. I cannot be completely certain that the X-Fi card is causing the problem, but am aware of another issue reported by other X-Fi users in which the PC will not shut down cleanly if a USB disk dri've is connected. I am also experiencing this problem - EAXModule is reported as hanging. This leads me to suspect that there is some sort of USB conflict associated with the card.
I would appreciate some assistance with this, as it is extremely frustrating.

I seem to have fixed the Hauppauge problem by disconnecting the Belkin USB hub that I was also using. Of course, given that I also depend heavily on this device, this might not have totally resolved the issue. Anyway, at least I can conclude that the X-Fi and Win-PVR aren't inherently conflicting.
I hope a fix for the external DVD dri've problem is in the works.Message Edited by rohan_p on 0-2-2006 03:24 PM

Problems with starting ifs after installation

Hi Gurus,
please help me. We have install iFS (9.0.1.0.0) on a HP machine. Starting the iFS System, the ifslaunchdc and
ifslaunchnode works fine, but starting ifsstartdomain i become following error message:
An exception occurred while starting Domain Controller - oracle.ifs.common.IfsException:
IFS-40005: Unable to find remoted object
(ifs_socket://idefix:53140/IFS.DOMAIN.DOMAINCONTROLLER.Locator)
oracle.ifs.common.IfsException: IFS-40011: Unable to connect channel
java.net.NoRouteToHostException: Timed out
In the DomainController.log file:
2/14/02 12:00 PM SocketRemoter: java.io.IOException
java.io.IOException: javax.net.ssl.SSLException: SSL handshake failed: SSLConnectionClosedGraceful
at oracle.security.ssl.OracleSSLSocketImpl.serverStartHandShake(Unknown Source)
at oracle.security.ssl.OracleSSLServerSocketImpl.accept(Unknown Source)
at oracle.ifs.common.remoted.socket.SocketRemoter$SocketRemoterRunner.run(SocketRemoter.java:1626)
And in the startdomain.log file:
February 14, 2002 12:00:17 PM CET
oracle.ifs.common.IfsException: IFS-40005: Unable to find remoted object (ifs_so
cket://idefix:53140/IFS.DOMAIN.DOMAINCONTROLLER.Locator)
oracle.ifs.common.IfsException: IFS-40011: Unable to connect channel
java.net.NoRouteToHostException: Timed out
at oracle.ifs.common.remoted.socket.OutgoingChannel.connect(OutgoingChannel.java:116)
at oracle.ifs.common.remoted.socket.SocketRemoter.sendOutgoingMessage(SocketRemoter.java:1061)
at oracle.ifs.common.remoted.socket.SocketRemoter.find(SocketRemoter.java:563)
at oracle.ifs.installer.DomainStarterWithoutGUI.getDomainControllerInterface(DomainStarterWithoutGUI.java:107)
at oracle.ifs.installer.DomainStarterWithoutGUI.tryNoGUIRemoteDCControl(DomainStarterWithoutGUI.java:70)
at oracle.ifs.installer.DomainStarter.runInSilentMode(DomainStarter.java:136)
at oracle.ifs.installer.DomainStarter.main(DomainStarter.java:74)
I tested the ports with netstat -a, all tree ports are on listing. What can i do next?
regards
Helmut

Hi Gurus,
I'm Hamid from India,
Please help me. I have install iFS (8.0.1.0.0) on a
Windows 2000 server. While Starting the iFS System,
i become following error message:
An exception occurred while starting ifssart.bat(Batch File)
Java<tm> Runtime Loader Verson 1.1.8
Program c:/Oracle\ora81\ifs\jre\bin\jre.exe exited with code 1
C:\Oracle\Ora81\ifs\jws\bin..\bin\jserv.exe
C:\Oracle\Ora81\ifs\jws\bin..\bin\jserv.exe
jserv: Shutting down the server
My ifsstart.bat file is :
[b]@echo off
@setlocal
rem
rem starts all iFS processes:
rem Java Web Server
rem ServerManager for iFS Agents
rem ServerManager for iFS Protocol Servers
rem
rem Copyright (c) 1999 - 2000 Oracle Corporation
rem All Rights Reserved
rem
call "C:\Oracle\Ora81\ifs\bin\ifsenv.bat"
set START_JWS=true
if /I %START_JWS%==true call %IFS_BIN%\ifsjwsstart.bat
@echo off
start "iFS ServerManager" /MIN "%IFS_JRE_HOME%\bin\jrew" -classpath %IFS_BASE_CLASSPATH% oracle.ifs.tools.ServerManagerLauncher -start "%IFS_JRE_HOME%\bin\jrew" -mx32M %IFS_BASE_CLASSPATH% "%IFS_SETTINGS%\IfsAgents.def" "%IFS_LOG%\IfsAgents.log" "%IFS_SETTINGS%\IfsProtocols.def" "%IFS_LOG%\IfsProtocols.log"
@echo on
@endlocal
and My ifsjwsstart.bat file is :
@echo off
@setlocal
rem
rem iFS JWS Server (startup)
rem
rem Copyright (c) 1999 - 2000 Oracle Corporation
rem All Rights Reserved
rem
call "C:\Oracle\Ora81\ifs\bin\ifsenv.bat"
set OHREL=\Oracle\Ora81
set CLASSPATH=
set CP=%IFS_BASE_CLASSPATH%;%IFS_HTTP_CLASSPATH%
set JAVA_HOME=
start "Java Web Server (do not close this window; use ifsstop.bat or ifsjwsstop.bat to exit)" /MIN "%IFS_JWS_HOME%\bin\jserv" -javahome "%IFS_JRE_HOME%" -javacmd jre -cp %CP% -vmargs "-mx128m -cp %OHREL%\ifs\settings;%OHREL%\ifs\jre\lib\rt.jar;%OHREL%\ifs\jre\lib\i18n.jar;%OHREL%\jdbc\lib\classes111.zip;%OHREL%\lib\vbjorb.jar;%OHREL%\jlib\xmlparserv2.jar;%OHREL%\ifs\lib\repos.jar;%OHREL%\ifs\lib\adk.jar;%OHREL%\ifs\lib\email.jar;%OHREL%\ifs\lib\tools.jar;%OHREL%\ifs\lib\utils.jar;%OHREL%\ifs\lib\release.jar;%OHREL%\assistants\jlib\jnls.jar;%OHREL%\ifs\custom_classes;%OHREL%\ifs\webui_classes;%OHREL%\ifs\lib\http.jar;%OHREL%\ifs\lib\webui.jar;%OHREL%\ifs\lib\clientlib.jar;%OHREL%\ifs\jws\lib\servlet.jar;%OHREL%\ifs\jws\lib\jst.jar;%OHREL%\ifs\jre\lib\javac.jar"
@echo on
@endlocal
would appreciate if u could please reply to the e-mail address mentioned : [email protected]

Problem with starting IWS6.0 after installing PHP

Similar Messages

Maybe you are looking for