Problem with stop PPC G5 Dual 2GB

Hi, i m new user. I have a problem with Dual G5 2,0GB. I dont know why my mac when do STOP at apple menu, it die. Dont start again. I tryed to reinstall OSX 10.5 and 10.5.6 But it does the same thing. There is somebody can help me what i do????? Thanks

Are you saying you can get it to boot from the install disks but not the Hard drive?
Startup holding down the "C" key on the keyboard. Get to the Utilities folder and use Disk Utilities on the hard drive. Let it fix what ever it finds. Then run permission repair from Disk Utilities. Then go to the install screen (it will come up when you quit disk utilities.
Then
!) If you have nothing on the Hard drive: do a clean install of the system software. Use the option that writes zeroes on the disk as it's formatting (it will block out any bad sectors) then complete the install.
2) If you have anything on the disk back it up to an external disk if you can. Instead of doing a clean install try an archive and install.
Good Luck

Similar Messages

  • Qsm pc, problem with stop loop

    Hello,
    i tested queue producer/consument with event case, but i have problem with stop the both loop, can you help me with attachment ?
    Attachments:
    queue_mereni_1.zip ‏46 KB
    Global_queue.zip ‏3 KB

    thanks for your answer,
    i had problem with upload *.vi (some mistake), so when a upload *.zip it was ok, but i do not know why..
    please, when i put time out constatn, so when i push "stop" then both loops end - it is ok BUT:
    when i push "stop 2" button (for the second loop) so there is error (in attachment), please do you know why?
    i am sorry for a lot of questions but i try understand it..
    thank you
    Attachments:
    qsm.jpg ‏31 KB

  • Do Blueray burners work with a PPC G5 (dual 1.8GHz)

    Do Blueray burners work with a PPC G5 (dual 1.8GHz)?

    All BluRay burners are SATA, so you'd need either an External Firewire Burner or a SATA<->IDE converter if replacing the built-in CD/DVD drive.
    Then you'd need Software like Toast 9 or 10...
    http://eshop.macsales.com/shop/optical-drives/superdrives/

  • Problems with stopped HP Print Jobs on Mac OS 10.5.

     I have several Mac Stations with different Mac OS X versions (Mac OS X 10.5-10.7) and bought 2 HP Laser Printers:
    - HP LaserJet Pro 400 M401dw
    - HP LaserJet Pro 200 M276nw
    After installing the HP Driver SW on all Mac Stations I changed then on the Printers the dynamic IP address to static ones. The printing didnt work anymore from the Mac Stations. I re-installed all Driver SW on every Mac Station. Then Printing worked on every Mac, except only on the Mac OS X 10.5. Station the Print Jobs were always stopped after any Print attempt.
    This appeared on the Mac OS X 10.5. Machine in the Printer Spooler Job Message Window and within the error_log File content:
    - can't create PictWPSDoc from `/private/var/spool/cups/xxx'.ERROR during execution of pictwpstops. Error number -9783
    As it seems like problems existed with file permissions I ran a complete Disk Utility File Permission Repair. Then another reinstall of the HP Driver Packages. - Still the same failures with stopping Print Jobs.
    Then I read the README file of the Installation Package. And the quite simple solution was:
    DE-INSTALL the HP Driver SW FIRST (with the HP Deinstallator), BEFORE RE-INSTALLING the HP Driver SW again.
    So I did this, then no Print Jobs were stopped anymore and both Printer are happily printing.
    The conclusion is, I guess, Mac 10.6..10.7 does not have problem with multiple re-installation of the HP driver SW. Only the Mac OS 10.5. did NOT work anymore after another reinstall of the Driver SW Package, and without de-installing it properly. The bottom line is to de-install the driver SW (and maybe disk repair) properly BEFORE another insallation wants to be done. This however solved my printing problems on the Mac OS X 10.5. machine.

    Hi,
    Please follow the link below :
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    I work for HP but my posts and replies are my own.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Problems with stopping dbconsole & iSQL+

    I have 2 databases (10.2.01) on 1 Linux RedHat server. We needed to implement ESRI GIS that’s why we wanted to keep those DB separate – GIS is on 2nd DB.
    I have problem with shutting down dbconsole & iSQL+:
    dbconsole is starting normally, but on shutdown it gives error „Failed to shutdown DBConsole Gracefully”. Not sure if it happens coz of 2 DBs on same server, because I forgot to add something to config files or I 1ce accidentally restarted server while DB was set to shut down normally.
    Reverting GIS DB to backup after making startup/shutdown script 1st box restart, but before box restart mid-normal DB shutdown didn’t change a thing.
    Startup/shutdown script in “/etc/rc.d/init.d”:
    #!/bin/sh
    # chkconfig: 345 99 10
    # description: Oracle auto start-stop script.
    # Set ORA_HOME to be equivalent to the $ORACLE_HOME
    # from which you wish to execute dbstart and dbshut;
    # Set ORA_OWNER to the user id of the owner of the
    # Oracle database in ORA_HOME.
    ORA_HOME=<Oracle home dir>
    ORA_OWNER=oracle
    if [ ! -f $ORA_HOME/bin/dbstart ]
    then
    echo "Oracle startup: cannot start"
    exit
    fi
    case "$1" in
    'start')
    # Start the Oracle databases:
    # The following command assumes that the oracle login
    # will not prompt the user for any values
    su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
         su - $ORA_OWNER -c "ORACLE_SID=<DB SID>;$ORA_HOME/bin/emctl start dbconsole"
         su - $ORA_OWNER -c "ORACLE_SID=<GIS SID>;$ORA_HOME/bin/emctl start dbconsole"
         su - $ORA_OWNER -c "ORACLE_SID==<DB SID>;$ORA_HOME/bin/isqlplusctl start"
    'stop')
    # Stop the Oracle databases:
    # The following command assumes that the oracle login
    # will not prompt the user for any values
         su - $ORA_OWNER -c "ORACLE_SID==<DB SID>;$ORA_HOME/bin/isqlplusctl stop"
         su - $ORA_OWNER -c "ORACLE_SID==<DB SID>;$ORA_HOME/bin/emctl stop dbconsole"
         su - $ORA_OWNER -c "ORACLE_SID==<GIS SID>;$ORA_HOME/bin/emctl stop dbconsole"
    su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
    Esac
    iSQL+ is also starting normally, but on stopping it gives:
    iSQL*Plus 10.2.0.1.0
    Copyright (c) 2003, 2005, Oracle. All rights reserved.
    Stopping iSQL*Plus ...
    Error: Unable to find java:comp/ServerAdministrator: Lookup error: javax.naming.AuthenticationException: Invalid username/password for default (admin); nested exception is: javax.naming.AuthenticationException: Invalid username/password for default (admin)
    iSQL*Plus stopped.
    But it’s still running…
    I only managed to work around dbconsole by editing emctl.pid to match Enterprise Manager Agent Port for respective SID (not sure even if you can call that workaround), but emctl.pid seems to be random on dbconsole start.
    I really don’t want to put any DB updates on until I manage to shutdown dbconsoles & iSQL+ properly… or maybe update IS the solution.
    GIS DB is just created - no data on it. So I can delete it if its gona help, but Id prefer to solve this as experience never hurts (especially if Im gona have 2 DBs on 1 box).
    I’m new to Oracle – been on Administration workshop & backup/recovery courses, but those problems don’t really feel like basic stuff so some tips on this would be welcome.
    Thanks in advance.

    According to my little knowledge - i don't think Oracle is an AIDB. It is only RDBMS or rather you can call it Advanced RDBMS.
    Now, you are thinking that since you have provided the relavant table here - so Oracle should automatically pic the single records. Since you have define every logic including the concept of primary key, foreign key in your table.
    But, question is - did you apply the relationship in your join between the tables.
    What does a primary key, foreign key do inside a table? Is it automatically select the unique rows from the join tables - when you didn't mention the join criterion.
    If you think that - then you are wrong. My advice is - kindly go through the JOIN Concept.
    Then start your coding. This is very dangerous way to start. Learn the basics at least.
    So, what Senti suggested has a very much valid point.
    Regards.
    Satyaki De.

  • Problem with "stop playing causing camera light to flash

    Since ipgrading to ios 5.1 I se that Apple took away the Sleep ipod opton for the timer and relaced it with "stop playing".  Unfortunately, wen the timer reaches zero, the phone stops playing but the camera flas starts flashing until I unlock the phone.  Besides being annoying, this obviously defeats the purpose of resting the phone and saving battery life.  Any suggestions?  Note: I do have a flaslight app on the phone in case that makes a difference.

    Thanks again
    I have removed the keyframes in frame 2 and 6 on all the layers (please seen new pic below), however the problem still persists.
    Here is my code on my actions layer:
    stop();
    toolbar.addEventListener(MouseEvent.MOUSE_DOWN, fl_ClickToDrag);
    function fl_ClickToDrag(event:MouseEvent):void
        toolbar.startDrag();
    stage.addEventListener(MouseEvent.MOUSE_UP, fl_ReleaseToDrop);
    function fl_ReleaseToDrop(event:MouseEvent):void
        toolbar.stopDrag();
    about.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_4);
    function fl_ClickToGoToAndPlayFromFrame_4(event:MouseEvent):void
        gotoAndPlay(2);
    latestnews.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_6);
    function fl_ClickToGoToAndPlayFromFrame_6(event:MouseEvent):void
        gotoAndPlay(3);
    services.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_7);
    function fl_ClickToGoToAndPlayFromFrame_7(event:MouseEvent):void
        gotoAndPlay(4);
    portfolio.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_8);
    function fl_ClickToGoToAndPlayFromFrame_8(event:MouseEvent):void
        gotoAndPlay(5);
    contact.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_9);
    function fl_ClickToGoToAndPlayFromFrame_9(event:MouseEvent):void
        gotoAndPlay(6);
    As you can see the code looks pretty correct to me. Ignore the code at the top, that is just for a draggable graphic on the page.
    Any clues from the code??

  • My Problems with Netboot, PPC iMacG5, 10.5.6, Leopard Server-Solved

    Several contributors steps helped me out, in this archived thread:
    http://discussions.apple.com/thread.jspa?threadID=1649502
    I have added my own steps, for record, as I could not add to the archived thread.
    Problem: OSX 10.5.6 Server, set to an "Octopus" configuration,
    ( Standalone server, hooked into a Cisco 2950 Switch, switch manages DHCP, keeps all traffic localized)
    Hooked iMac G5 clients into switch. Set Server to netboot a PPC Leopard 10.5.6
    image made from same iMac G5 client. Hooked six iMac G5's into the switch,
    one fired off successfully, five all failed, going to Kernel Panic after first one
    kicked off successfully. Tested scenario with 3 Intel MacBooks imaging
    an intel MB 10.5.6 image, same server and switch, all deployed successfully.
    Following a combination of Brian Neeson's and Kellefson's Steps:
    1. Stop Netboot Service on Server.
    2. Disable Netboot Shares, save changes
    3. Launch Activity Monitor, stop nfsd service. ( Force Quit) It auto starts again
    4. Re-enable Netboot Shares
    5. Start Netboot Service, select PPC Image, Set to PPC Achitecture only, save changes
    6. Reboot Leopard Server.
    Issue is now resolved, and images deploy successfully, testing 2 PPC iMac G5s without fail.
    Posting this so I can set a subscription to it ( so I can find it faster, I cannot set
    a subscription to the archived post) and to help others with same issue.

    Ok, I finally had some time to come back to this
    and try out a few things.
    One of the things that kept perplexing me about this was that only
    PPC White iMac G5's, 1.6ghz models, were constantly affected by this issue.
    I tried it looking at it from the server end: Recreated the Netboot NFS share point,
    recreated the 10.5.6 image as a gold master, made sure all nbi's were in their proper
    locales.
    I tried looking at it from the iMac itself: swapping out Hard drives, Logic Boards,
    Zappring PRAM, replacing and swapping out Ram, etc.
    Finally after stepping away from it for a week to look at
    InstaDMG, it dawned on me......
    Josh, ( I believe) in his webinar, said that to build your
    image using instaDMG, you should use Leopard 10.5 Retail disc as the
    base of choice, and then put everything in as a package deployment
    on top of that.
    +So that got me to thinking, what if 10.5.6 was problematic for deployment,+
    +but not so for updating the system in general?+
    That got me to remembering that that wouldn't be the first time Apple
    has released an update that screwed up NetInstalling
    ( 10.5.2, 10.4.10, and 10.3.4 come to mind).
    *So I then decided to try a new test:*
    I went back to a good known working no problems White iMac G5 PPC 1.6ghz machine,
    wiped the HD, and installed 10.5.0 on it, and then put all my apps back on it.
    I then updated every app and patched the Apple essentials ( Quicktime, Airport0
    but did not update the OS.
    I then Target FW'd it to my Xserve, and used Apple's SIU to create the image.
    Then, I deployed it back to three iMacs in a row through the network.
    Success! no KPs and the iMacs all flawlessly deployed.
    I then tried another set of three, and success again....all three had no KP
    at booting into Netinstall, and all three deployed successfully.
    *So I believe that I have fixed my issue!*
    My next test is to create an image that will post deploy the 10.5.6 combo update
    to the iMacs after the 10.5.0 image is deployed, but even if I run into
    problems there, My workaround will be just to deploy 10.5.0, and then
    ARD out 10.5.6 combo after the machines have restarted and booted successfully.

  • Problems with break point in Dual Layer project

    Hi,
    I'm currently having a problem setting a break point in a Dual Layer DVD project in DVD Studio Pro 4. I have a project that has 5.9 GB of data (5 shows with between 7-8 chapters in each). The problem I'm having is that in the 5th chapter of the 4th show, there is a freeze frame hickup when I burn the disk. I've tried moving around the chapter mark, deleting them and re-adding them, re-exporting the media (it is in MPEG-2) in all combinations of those and am still having the freeze problem at that chapter mark. I've gone back to the original media and there are no problems there.
    What I think the problem is is that the disk is automatically setting the break point for the dual layer disk at that chapter mark. However, when I go into the project and try to set the break point manually from the dropdown, I can't seem to select anything. The default is the begining of the 5th track, and I can only change it to automatic and back again. Anything else I select just goes back to that 5th track, but I still think it's actually doing automatic instead. I'm using a Verbatim DVD+R DL if that helps anything as well.
    To all, do you agree that the problem is most likely due to the break point? And if so, how do I change the break point to the beginning of either the 3rd or 4th of the shows instead of having it seem to be stuck on automatic?
    Thanks in advance,
    Chris

    Alright, to answer my own question. Here's what I think the problem was.
    There are actually two Disk/Volume menus: one in the Disk settings when you're actually working in the project and another when you go to build and format. I kept trying to set the break point in the first one--in the disk settings in the project--and it wouldn't let me because it can only be set when building and formatting.
    It's kind of an annoying settup that there are two identical menus that don't fully communicate with each other, but in the end the solution has been solved.
    Chris

  • Problem with stop( ) clone  (again!!!)

    Hi,
    after asking & searching in the forum, i know that in order to stop a ds (or a clone) the ds(or the cloneable) must be transmitted, played, processed etc. Now, i try to stop a clone , right after the cloneable starts being processed, but the clone does not stop. I think i did it at the right point, because when i tried stopping the cloneable at this same point, the video stopped. But when i do it for a clone, the clone doesn't seem to stop. I' am stuck in this thing for quite a long time. Any help would be greatly appreciated!
    Thanksss

    It's not a P2P application but however there many similarities with a P2P. This is what i want to do. 1st client request the video from the server, the server sends it to him. After ,lets say 10secs, a 2nd client request the video also from the server. So the 1st one is already receiving the video and the server informs him that he has to send it to the 2nd client (from the beggining). Unlike a P2P the clients don't save the video in a file but they only play it while receiving it. This is why i want to: clone the ds, pause the clone and then send it. I've partially already tried what you propose (save the ds to file and then send it) using DataSink.But as i want to transmit the video while is being received, saving using DataSink doesn't really help because the temporary file that works as a buffer is not streamable. So i can only send the video after it is finished/ received. If u still think that the way i do it is not going to work please tell me because the deadline approaches and i don't want to lose time trying sth that it won't work :) .
    Sth else that i want to try is this: put the received stream in a buffer, clone or copy the buffer and use this buffer for creating a ds for transmission.
    What do u think?
    Thanks really a lot!!!

  • DKA790GX Platinum, have problem with changing FSB in Dual Core Center

    Hello guys, freshblood is here,
    I change fsb in Dual core center, but unfort.  core temp and CPUZ don't reflect any changes.

    I agree.  The BIOS gives you better control with better options.
    Quote from: Jack the Newbie on 26-January-09, 02:14:05
    Dumb MSI Dual Core Center.  It is not the best tool ever developed.  Use the BIOS for overclocking your system.

  • Problem with stop motion film

    I want to make a stop motion movie. But when I upload the pictures imovie automatically makes them "zoom in". instead of each picture just shwoing it zzoms in and out of each one which looks stupid when you're trying ot make a stop motion.
    HELP?!

    Go to FILE/PROJECT PROPERTIES and change the default action for your project. It is currently set to Ken Burns. Change it to FIT (letterbox) or CROP (will fill the screen by cropping your photo.)
    This will work for new photos you bring into the project. For photos already their, use the Rotate, Crop, Ken Burns Tool and select FIT or CROP.

  • Problems with Windows XP when dual booting with OS-X 10.6

    I have track pad issues. I can't drag things, and for some reason no matter how fast I move my finger, it moves the same distance on the screen.
    Is this a common issue? How can I fix this?

    Hi,
    Have you installed all the appropriate Boot Camp drivers? If so, try running Apple Software Update from Windows XP and see whether there's anything new. Other than that, it could be that you've turned off mouse acceleration and that's why your cursor only moves the same distance regardless of speed. As for the Drag and Drop issue - best just check all your Boot Camp drivers are installed and up-to-date.
    HTH,
    S.

  • PPC program problem with MacPro

    Hello all.
    Suddenly all my PPC programs stopped working on the MacPro.
    I have tried standard diskcheck and repair permissions on my boot harddrive.
    I have 4 different PPC program: Windows Media Player, Photoshop, MS Office and cannon scangear. All stopped working.
    It seems to be a problem with the PPC emulation.
    Any idea what I should do? Do I really need to reinstall my mac? It feels like Windows all over...
    Kind regards Mau
    MacPro 3ghz   Mac OS X (10.4.8)  

    I did download the full 10.48 update an installed. It still does not work.
    I am not shure what cused the problem. Had issus with that my root filesystem was full. It was /var/spool/qmaster that was filled with junk data.
    I could not delete the useless data in that directory. it took 50% of my harddriva space.
    I logged in as root and pwd to /var/spool/qmaster and the directory name of my qmaster que. Lets call it buhu.
    cd /var/spool/qmaster/buhu.
    To delete the data. The wonderful command:
    rm -rf *
    My computer works great, but no rosetta programs anymore. It worked since I got my Macpro in Aug.
    Thanks all for the help, and sorry for my shaky enlish.
    The 1049 update should have som rosetta updates. My problems could be solved with it?
    I am desperate and thinking about installing a beta build of 10.49.

  • PSE 6 & 8 for Macintosh launching problem with licence

    Hi, I have big problem with launch PSE under OSX 10.6. I exchange the HD drive in my MacBookPro and reinstalled system for 10.6 Snow Leopard. Some files I restored with Time Machine but PSE reinstalled with CD. At first I try with my hard copy of PSE 6 - when I try to lunch I always get message "Licensing for this product has stopped working". After this message I remowve PSE6 create new instllation and the same effect, the same message.
    So I completelly remove PSE6 with CD unistallation option, downloaded PSE8, install, restart computer, launch PSE8 and... the same effect - "Licensing for this product has stopped working", Error 150:30. Where is problem? Any solution for me?
    My MBP configuration is 4GB od RAM, C2D 2,4MHz, now 500GB HD.
    Regards,
    Pawel

    Barbara,
    I'm afraid that link supported by you don't resolve problems with Stopped licence. I try with no result. Some minutes ago I found resolve on this forum, and now all working fine.
    Ankush Ved in other post show solution.
    When I deleted file placed on my HD\Library\Preferences\FLEXnet Publisher\
    (Delete the complete "FLEXNET Publisher" folder by moving it to trash and subsequently Empty the Trash) and restarted and lunched PSE all working fine.
    Regards,
    Pawel

  • New RAM problems with my Dual G4 1.25 MDD

    Howdy I've had my Dual G4 1.25 MDD for 2 years and love it. I got it with 1GB RAM, thinking I was set. For Christmas I wanted to Upgrade the RAM to 2GB. from My PowerMac G4 Manual I knew I needed 2x 512MB PC2700 DDR333 CL2.5 SDRAM DIMM's.
    I went to DealRam (part of DealMac) and found 18004memory.com The price seemed great $39 per stick. I ordered it and within a week got 2x 512MB DIMM's. Problem was it was the Wrong RAM spec. I tried that RAM in my Mac 30 different ways and Everytime the computer either wouldn't boot, or it would suffer Kernel Protection Faults. One time it did boot up but the RAM only recognized as 2x 256MB DIMM's. I called the company, got an RMA and returned the RAM, this time they sent me 2 replacement DIMM's.... for a POWERBOOK, SO-DIMM's. I returned it again and finally Got from them the
    2x 512MB PC2700 DDR333 CL2.5 SDRAM DIMM's. They call it Hyperspeed RAM. Anywho, I powered down let the system cool over night and in the morning, popped it open, put the RAM in the 2 open slots DIMM2/J23 & DIMM3/J20. closed it back up and powered up. Everything was snappier, the boot was quicker and I checked About this Mac, it says 2GB. Apple System Profiler showed all 4 DIMM's and I thought everything was fine.
    Computer ran great for hours, no issues. Everything seemed quicker. Computer went to sleep overnight, next day woke from sleep and Tried to use iTunes and during an extensive sort for Songs, the system Locked up. Nothing would work. Had to force restart. this time I tried to Run my favorite online Game, WoW and after it loaded and I started to play, within 5 mins the whole game locked up. The audio sound went into a sort of Loop, I couldnt force quit and had to force reboot. This happened several times. I finally decided to Run the Apple Hardware Test. The Quick test locked up after running 2mins. I let it sit for 1hr just in case it was still doing something and the progress bar and time never progressed. So i forced reboot, ran Test again this time as Extended test. at 8 min & 31 sec the test stopped and I got an Error Code, this time I wrote it down "2MEM/2/4: DIMM3/J20."
    I guess that DIMM failed. I shutdown, popped open case, and removed DIMM3/J20 leaving the Original 1GB RAM and One of the 512MB Upgrades. I rstarted the Test again and Ran the Extended Test once more. It ran for 27mins & 24 secs and everything passed. So. 1.5GB is better than just 1GB. I powered down and powered back up to try and play WoW. Within 5 mins of loading game to play, everything locked up again.
    So I took both of the new RAM out and left the Original 1GB RAM and ran Test everything was great no Errors. Rebooted, and went onto WoW again and was able to play for several hours. I quit game and shut down for night.
    I have since Tried the 2x 512MB DIMM's in over 10 different variations in the computer with and without the original RAM and everytime I run a high end program or game (WoW, iTunes, and Photoshop), I get lock ups, crashes, and other screen weirdness.
    I dont want to have to Return the Memory again. I am already out over $15 from s/h with RMA's.
    PLEASE Any ideas what to do?
    1 thing I noticed the RAM gets very very hot, when I've powered down tand removed the new RAM. I wonder if there is a cooling issue?
    Anytime I put the Original 1GB RAM in, I dont have problems!

    Hi lz3broc,
    Sounds very much like faulty RAM to me, I'm afraid. I'm not sure about the temperature it's running at, but if the surrounding DIMMs aren't having a problem then I would definitely point the finger at those new memory sticks not being up to scratch.
    If you were convinced it was temperature related then you could always try putting heat spreaders on the memory to help with cooling, but as these stick (semi-permanently) to the RAM then you would never be able to return them.
    My personal opinion is that you should send the RAM back and buy two new DIMMs from Crucial Technology. I only ever buy RAM made by them and I've never had a problem with it - it's the same stuff Apple themselves generally use and works a charm every time. Probably not the news you wanted to hear, but that's probably the only way you're going to get a stable machine with 2GB RAM.
    Hope that helps,
    Andy.
    PowerMac G4 Dual 1.50GHz   Mac OS X (10.4.4)   Liquid Cooled

Maybe you are looking for