Problem with The Administration Server

Hi, I have the following problem....
sorry for my bad english....
on the server sun is installed "iplanet slapd-server" and all the users they are autenticatede whit it....
now i want to install SJES and i want to use this "iplanet slapd-server"....
when i run /usr/sbin/mpsadmserver configure:
oot@server:/shared/java_ent_sys_2005Q4/Solaris_sparc> /usr/sbin/mpsadmserver configure
Enter the fully qualified name of the computer
Fully Qualified Computer Name [server.dominio.com] {"<" goes back, "!"
exits}:
Server Root Information
Server Root: : /var/mps/serverroot
Choose the type of installation you prefer from the following choices:
Express - Installation option choices are made automatically. The easiest
installation and recommended for evaluating the product.
Typical - Software will be installed with the most common options. Recommended
for most deployments.
1. Express
2. Typical
What would you like to do [2] {"<" goes back, "!" exits}? 2
Choose the system user and group names under whose identity
the Sun Java(TM) System Server will run.
System User [root] {"<" goes back, "!" exits}:
System Group [other] {"<" goes back, "!" exits}:
Configuration Directory Server
Host [] {"<" goes back, "!" exits}: server
Port [] {"<" goes back, "!" exits}: 389
Configuration Directory Server Administrator
Administrator ID [admin] {"<" goes back, "!" exits}: cn=directory manager
Password:*******
Administration Domain
Administration Domain [dominio.com] {"<" goes back, "!" exits}:
The Administration Server runs on a different network port from other servers.
Specify the number of the port.
Administration Port [390] {"<" goes back, "!" exits}:
Installing Administration Server
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Checking connection to the Configuration Directory Server... failed.
The Admininistration Server cannot be configured.
:(.... where the error?
thanks....

This is a typical error when the fully qualified hostname of the machine cannot be properly resolved.
Said differently, can a client on the network connect to the machine server.dominio.com ? Is this machine known in DNS ?
Regards,
Ludovic.

Similar Messages

  • HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again.  The server returned the error: Mail was unable to log in

    I can send but cannot recieve email
    This is the messege I am gewtting:
    There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
    The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
    The server returned the error: Service temporarily unavailable

    Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

  • Problem with the new server UCS C220 for set IP to CIMC

    Hi
    We’ve a problem with the new server UCS C220.
    We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
    When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
    Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
    Note. The dedicated management NIC does not link, the other two ports do make link.
    What do you suggest to put an IP to CIMC and start installing our applications?
    regards

    You may have noticed that there is no DVD rom on the c220. What you need to do is:
    Login into the CIMC from your browser
    Luanch the KVM
    Insert the VMware DVD in your machines drive
    On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
    After the VMware OS installs press F2 to enter IP.
    Browse to the VMware ip to download the Vsphere client
    Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
    You can now upload OVA templates or manually create virtua machine from this enviroment.
    Hope this help

  • Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud.  I have verified the settings.  I can access my iCloud account online but can't send or receive e-mail via the mail account.

    Text limits to the "Question" link prevents a full explanation:
    This is a long-time problem.  I have tried to resolve it with Apple but their "Customer Support" is merely a name.
    I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network.  Verify the settings for 'Apple Email' and try again.
    "The server returned the error:  The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
    Well, I have verified the setting and tried again and again and …
    Well, you get the idea …

    JungleTaxi Cabbie wrote:
    Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
    Enter your Incoming Mail Server, User Name, and Password using the following settings:
    Incoming Mail Server: mail.me.com
    User Name: Your iCloud email address (excluding @me.com)
    Password: Your password
    Last Modified: Jun 27, 2013
    Maybe you should test these things before calling people out, because these settings do function perfectly well.
    iCloud is not supported on Snow Leopard or lower, why bother to mention it?
    The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
    The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
    JungleTaxi Cabbie wrote:
    Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
    I never said that there was, perhaps you imagined it.

  • Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

    Hi all,
    From time to time (at least once a day), the following message pops up on the user's screen:
    "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
    If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
    Any ideas?
    Thank you in advance

    Hi,
    For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
    Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
    http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
    Thanks,
    Angela Shi
    TechNet Community Support

  • There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

    Good day Guys
    First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :) 
    While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
    We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
    They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
    But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
    With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
    "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
    Outlook is unable to connect to the Proxy server. (Error Code 0)"
    Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
    Your assistance will be greatly appreciated.

    Hi,
    Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
    For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
    can change the host name by referring to the following article:
    https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
    Thanks,
    Simon Wu
    TechNet Community Support

  • Can the problems with the Cirrus server cause this

    Hello,
    We are have been developing an application using the Cirrus server for two months now and today we are having difficulties with the Netconnection.call method which we use to call the OnRelay method on the other peer. When a peer invokes the call method on his netconnection the OnRelay on the peer is called some of the time (so it is really unreliable).
    We are curious whether this could be related to the recent problems with the Cirrus server? If not, what could be a reason the calls are working only some of the time?
    regards,
    Kevin

    while the problems with our hosting provider are not yet resolved, the cluster should be operating nominally. that should include the proper and relatively reliable functioning of the relay/onRelay function.
    note that relay/onRelay is rate limited to about 1 relay every 2 seconds (approximated with a sliding window and about 10 relays every 20 seconds). this rate limit is in place because the relay/onRelay function is expensive to provide and a developer was abusing it. the limit is implemented by dropping relay requests for a time if the rate exceeds the limit point. the limit is per sender NetConnection.

  • CLI104 Unable to communicate with the administration server:

    i am doing a glass fish clustering with load balancer plugins using SJWS7.0 as the loadbalancer.
    i installed glassfish v2.1 and set up a cluster with a single node and single instance
    and i did all the steps as per this document
    https://glassfish.dev.java.net/javaee5/build/GlassFish_LB_Cluster.html
    i did all the steps with out any errors.
    but when i am trying to run the commad <websrvr_install_dir>/bin/wadm deploy-config --user=<websrvr_admin_user> <websrvr_instance_config>
    i am getting following errors
    CLI104 Unable to communicate with the administration server: Unable to connect t
    o admin-server. Please check if the server is up and running and that the host
    and port provided are correct.
    i don't how to fix this error , i search a whole day for fixing this errors.now i am waiting for help .please help me to fix this one
    Thanks and Regards

    The glassfish document that you mentioned does not provide any instructions to start the web server's administration server.
    Could you verify that the web server's administration server is indeed running? Do the following to start web server's administration server:
    $ <websrvr_instance_dir>/admin-server/bin/startservAfter that step try out the deploy-config command as described in the document.
    HTH.

  • Has there been any problems with the mail server?

    Has there been any problems with the mail server? I keep getting a notice of server failure.

    Unfortunately the error message does not identify the specific server, I (as many folks do) have several, Mac, yahoo, google ect.

  • Version 3.6.6 and Internet explorer will not load sites, so I reloaded the older 3.6.3 of firefox and websites load fine. Internet Explorer still will not load. The error message corresponding with 3.6.6 was that there were problems with the proxy serve

    Upgraded to 3.6.6 and no sites loaded, error in proxy server. Internet explorer will not load either. Reloaded firefox 3.6.3 and sites load fine, but internet explorer still will not load. I was only able to connect to yahoo messenger when websites were not loading.
    == This happened ==
    Every time Firefox opened
    == I upgraded to 3.6.6

    I have a problem with Firefox loading. It will not load and it says Firefox is using a proxy that refuses connection. Check with your network administrator. How do I get Firefox to work. I've uninstalled it and reinstalled it twice. Any help would be great thanks.

  • I have problem with the BPEL server caching the jar file of Instance

    Is there any way to undeploy and redeploy a process where you have changes to the underlying DA, without the BEPL server being restarted. This always works in my Local BPEL server in my Laptop. But when deploying in the hosted BPEL enviroment it becomes a big problem in getting it restarted when ever I MAKE changes.
    Is there any other way to disable the Cache of the instance and make it use the newer version uploaded. One more thing if the connection to a database is severed, then the DA will not work until the server is restarted. All the instances using the said connection is failing with either "Invalid Datatype" or "Socket Read exception". Can someone help!!
    Thanks,
    Prabhakar

    Hi,
    have you tried to kill the session of the DA in the database?

  • OIM problem with weblogic administration server (configuring OIM)

    Hi,
    I have this software installed:
    - Oracle database 11gR2 (schemas made with RCU)
    - SOA Suite generic 11.1.1.2.0
    - Repository Creation Utility
    - Weblogic Server 1034
    - JDK 1.6.0_24
    - IAM_generic 11.1.1.1.3.0 (OIM)
    when I'm configuring the oracle identity management 11.1.1.3.0 and I'm in the weblogic administration server screen I write in the fields:
    url administration server : t3://localhost:7001
    Username: weblogic
    Password: ****** (correct)
    when it tries to connect to weblogic I get an error that says:
    INST-6180: It has not been possible to get the URL server managed by the OIM domain // (spanish translation of the error)
    then if look at the weblogic standard output (and in the admin server log) I see the following error
    ####<23-feb-2011 21H04' CET> <Warning> <RMI> <WIN-5GJP37O0LUL> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1298491447915> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.management.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;)
    java.lang.NullPointerException.
    java.lang.NullPointerException
         at java.util.concurrent.ConcurrentHashMap.get(ConcurrentHashMap.java:768)
         at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getMBeanContextLoader(JMXContextInterceptor.java:475)
         at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:146)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
         at java.security.AccessController.doPrivileged(Native Method)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
         at java.security.AccessController.doPrivileged(Native Method)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
         at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
         at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5$1.run(JMXConnectorSubjectForwarder.java:326)
         at java.security.AccessController.doPrivileged(Native Method)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
         at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1404)
         at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
         at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
         at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
         at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
         at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Thanks for your time

    As mentioned earlier in this thread please use 10.3.3 weblogic .
    I have created 8 post step by step installation series for OIM/OAM/OAAM/OAPM inclding SOA here http://onlineappsdba.com/index.php/2010/08/05/oracleidm-11g-step-by-installation-of-oam-oim-oaam-oapm-oin-111130-part-i-load-schema/
    IDAM 11g certification matrix is at http://www.oracle.com/technetwork/middleware/id-mgmt/identity-accessmgmt-11gr1certmatrix-161244.xls
    Atul Kumar
    - Book "OAM/OIM 11g for Administrators" -> http://onlineappsdba.com/index.php/2011/02/23/my-book-oracle-identity-access-manager-11g-for-administrators-is-now-available-in-raw-format/
    Edited by: onlineAppsDBA.com on May 15, 2011 2:15 PM

  • Outlook 2013: There is a problem with the proxy server's certificate

    Hello!
    One more question regarding Outlook 2013/Exchange2013SP1:
    There are three lab PCs: DC, Exch1, Exchange2. There's a wildcard certificate installed on Exch1 (https://social.technet.microsoft.com/Forums/en-US/6a440c99-47bd-4f48-8cc5-9f92e6b06496/wildcard-certificate-for-exchange-2013?forum=exchangesvrgeneral).
    OWA works perfect with this wildcard certificate.
    I install Outlook2013 on Exch1 and get the error:
    DC.Entreprise.Local is a computer certificate issued for the computer DC.Enterprise.Local.
    DC.Enterprise.Local IS NOT (and never was) the proxy for Exch1 or Exchange2:
    How Outlook could request DC's certificate if the proxy server = Exch1.Enterprise.Local???
    Thank you in advance,
    Michael

    Hello all,
    Thank you for your replies!
    Since I'm using a wildcard certificate I changed Outlook providers according to this:
    http://blogs.technet.com/b/exchange/archive/2013/08/02/part-2-reverse-proxy-for-exchange-server-2013-using-iis-arr.aspx
    If you do choose to use a wildcard certificate, you should also make sure that you
    change the EXPR Outlook Provider, so that Outlook Anywhere clients can successfully connect to the Exchange Server (this behavior can be a particular issue
    if you have Windows XP clients). If you do not make this change then end users may continue to receive a prompt for a certificate mismatch."
    ...and EXCH and EXPR are both set to *.Enterprise.Local.
    "I install Outlook2013 on Exch1" you mean you install Outlook on top of Exchange?"  - on the same server as Exchange, and in this case Outlook must use SCP, not DNS (the server and the client are in the same AD domain).
    "Without SCP, Exchange  try DNS autodiscover lookup, first site it will try is
    https://emaldomain/autodiscover/autodiscover.xml, which happen to be resolve to your domain controller."  - I think that's the case... I just don't understand why
    an internal client can't find the SCP that does exist and point to exch1.enterprise.local:
    Regards,
    Michael

  • There is a problem with the proxy server's security certificate (internal Outlook 2013 users)

    I am receiving the above message for internal Outlook 2013 users when they open Outlook. Despite this message, Outlook is fully functional. External OA users do not see this message. We are using an SRV record for our autodiscover and pointing it to the
    name on the single cert we have. I've also already changed the outlookprovider record in Exchange. Any ideas?
    TIA!

    Hi Alceryes,
    According to the error message, Outlook is unable to connect  to the proxy server (Error Code 10),
    it seems an issue on the Certificate side.
    FLAG_CERT_CN_INVALID 0x00000010
    More details to see following KB:
    http://support.microsoft.com/kb/923575
    Would you like to tell me the reason that why you are using SRV record for Autodiscover?
    I find a FAQ on Autodisocover for your reference, hope it is helpful:
    https://social.technet.microsoft.com/Forums/office/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • My mac mail is now offline. The pop up says There may be a problem with the mail server or network. Verify the settings for account or try again. Any one know how to get my mail back on?

    I down loaded the new free os x yosemite today and now my mail is offline. Several pop ups that say there is no connection.
    Verify the settings for account or try again.
    The server returned the error: The certificate for this server is invalid.
    I have not changed a thing and now I have no emails coming or going. Since it is my communication line to many of my clients, I am in need of some answers asap.
    Thank you.

    I recently have been trying to find out why my email won't go online. A window pops up stating The identity of "pop.qwestoffice.net" cannot be verified. The certificate for this server is invalid. You may be connecting to a server that is pretending to be "pop.qwestoffice.net" putting information at risk. It asks to connect anyway? Anyone out there have a clue? I am losing my contacts with my clients.

Maybe you are looking for

  • Is there a way to password protect a movie?

    We have imovie in our school. We were looking to password protect our movies so other students could'nt tamper with them. Is this possible? If so how?

  • Touch screen doesn't always work

    When I am playing games it sometimes doesn't register my touches.  It is one week old.

  • UPDATE/INSERT

    Hi All, My target table has two columns table_id and status. table_id is the primary key. I am doing an UPDATE/INSERT type of loading and match by constraint - "all constraints". The records should be updated by matching my primary key column - table

  • DVI-MDP or Thunderbolt?

    Why is my MDP adapter to DVI not working on my New MacBook Air? The screen just flashes. Do I need to purchase a DVI-Thunderbolt adapter? Thank you

  • Error while restarting sessions in Odi

    Hi when i try to restart a session using a particular agent am getting following errors . Please kindly help to sort it out oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 Internal Server Error      at oracle.odi.runtime.agent.i