Problem with the agent console created in the ESSO-Logon Manager 64 bits

Friends,
When I use the installer that I created in the console ESSO-Logon Manager for 32-bit, this I install it on the client side and when I synchronize with the console-Logon Manager ESSO brings me and I can see the agent all the templates I configured.
I have a problem with the agent console created in the Logon Manager ESSO-64bit.
When I use this installer on the client stations and then by the agent does not envision the applications that I have configured in the console.
This causes you can not do single sign on to applications that I have configured in the client stations
To generate this installer use the source name: ESSO-LMx64.msi
Can someone please help me with this problem, this only happens when I use the msi installer on 64-bit client stations.
Thanks.

Jackson_Bill wrote:
What IDE are you using and what platform?Read first.
Moh Bob wrote:
I'm using J2ME platform SDK 3.0
db

Similar Messages

Problems with the (WINDOWS 8 pro -64 BIT) IN THINKPAD L520 - 5016 RL2

I have some problems with the (WINDOWS 8 pro -64 BIT) is not working properly IN THINKPAD L520 - 5016 RL2.
1. Message appears telling me that the drivers of the display has been restored crash.
2. The mouse pointer moves very slowly sometimes, and sometimes does not move for a while.
3. Device software such as lenovo-airbag protection , lenovo-internet connection and lenovo web connection........ its is not compatible with the system, and do not work.
What is the solution؟

Hi, MUJAHED
I have a few questions for clarification I would like to ask about your first two issues:
1) Can you copy the contents of this message and respond back with them. Any error codes or direct quotation from the system can really help in diagnosing a problem.
2) Does this only apply to the TrackPad, or does this behavior also occur with an external mouse? It may help to download the latest mouse drivers for your system, which can be found here.
As for your last issue with the Lenovo service not being compatible with the system: Unfortunately, software for these applications has not been released for Windows 8. Windows has its own network settings that you can use to connect to the Internet and networks, so that is still possible, though you may not enjoy it as much as Lenovo's program.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Problems with the ESSO Componenet Password Reset

Good day,
I have a problem with the component of ESSO (Password Reset 10.1.4.0.1), they comment on the case:
Install PR_Server on a host with W2K3 Server and PR_Client on a host with XP, when entering the host client and I click the area to use the Password Reset user login and answer the questions to enter when you configure the client in this host once completed this step and have answered correctly answers allows me to change my user password, Aca my problem the second time performing the same procedure will not let me change my user password.
Someone can help me solve this problem...
Thanks.

Good day,
I have a problem with the component of ESSO (Password Reset 10.1.4.0.1), they comment on the case:
Install PR_Server on a host with W2K3 Server and PR_Client on a host with XP, when entering the host client and I click the area to use the Password Reset user login and answer the questions to enter when you configure the client in this host once completed this step and have answered correctly answers allows me to change my user password, Aca my problem the second time performing the same procedure will not let me change my user password.
Someone can help me solve this problem...
Thanks.

Am I the only one having a problem with the latest network manager?

I mean, it's working, but once in a while it slows down heavily after a longer suspend-resume cycle. As in, it takes about half a minute before it even starts scanning. It started after the update yesterday or the day before. The systemd journal doesn't list any problems. I know how to setup wpa_supplicant manually and have used that kind of setup for a long time, I'm just wondering if this is a bug that needs tracking down.

I have no issues with suspend-resume cycle with networkmanager.

Problem with the Extractor Framework Manager job

Hello 
The Diagnostics Setup scheulded a job: EFWK Resource Manager (01 Minute) 
This job has the status Finished, but the job log has the following entries every time: 
 
|Datum |Uhrzeit |Nachrichtentext |N-Klasse|N- Nummer|N-Typ| 
 
|05.01.2010|12:30:01|Job wurde gestartet | 00 | 516 | S | 
|05.01.2010|12:30:01|Step 001 gestartet (Programm E2E_EFWK_RESOURCE_MGR, Variante , Benutzername 01191042) | 00 | 550 | S | 
|05.01.2010|12:30:01|TPP 0020283456 E2E_ME_RFC_ASYNC W 3BDA34C6D1230D0C1988EE777FD22047 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|SME E2E_ME_RFC_ASYNC W AF4891D11719ECEA2C8C872EFFA0CBFE SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_ASYNC W 4ADE7EA655B62C79DDC5D7F07A100190 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|TAP 0020283456 E2E_ME_RFC_ASYNC W 55D9710E31D1A0E5A1B755DD156AC296 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|SME E2E_ME_RFC_ASYNC W 6A293C886DC33BF281E22FCBAA8AFC23 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_255 W B4AB19B6BC72E0E439B28F44BFEDA867 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_255 W 76C2909D46B110F20E6232ECF903A4C8 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_255 W B38E7C9401B23AEBE18C83E8C9D3F5F4 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TAT 0020283456 E2E_ME_RFC_ASYNC W 81615C7B80DFA63B4B79B5E78EF71648 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|TAT 0020283456 E2E_ME_RFC_ASYNC W B170834A99DA28EB6A03F6040AFEDEE9 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_255 W A34F9C87BED6D9B9DA57999B075A27F6 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TAP 0020283456 E2E_ME_RFC_ASYNC W A4A5DCFD278A0B8C58F20818B21B4AD8 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_255 W FB734F3EC6956B0CB4FB314E4E9B6DAF NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_ASYNC W 3A60AAB77774D083779638F4596435F3 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_255 W D90A359199E5341F425521A937462FA2 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_255 W 0BEDDE4B4A2830F0305FDD27C2863CDF NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_255 W 1BDECD07CE3A30647BEF641D63938ED2 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_255 W 12A2D39C4D127D4A1D492949748A9322 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|SME E2E_ME_RFC_ASYNC W 90B2FA1D891342909D842B872214CEE3 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|SME 0020216294 E2E_ME_RFC_255 W 1601AE3A069301A15C40CB2BE39AF7D5 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|SME 0020216294 E2E_ME_RFC_255 W 77ED40F94D551BE6FCD2EB407CB889C5 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TAE 0020283456 E2E_ME_RFC_ASYNC_NO_RR W DDFB215F2DB21E36B388EFED001EF7AD NONE DIA WP Resource Failure| 00 | 001 | S | 
|05.01.2010|12:30:01|SME 0020216294 E2E_ME_RFC_255 W B0F6FA11BD859F58C53D6CDD194B98F2 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|SME 0020216294 E2E_ME_RFC_255 W E7AB58CA48F77908A091E4BB69C97D23 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|SME 0020216294 E2E_ME_RFC_255 W C5A147B4A1A9E31648F4E35E2440AFB8 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|SME 0020216294 E2E_ME_RFC_255 W F03F645E2383340067151874C9554569 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|SME 0020216294 E2E_ME_RFC_255 W BA03B0B20E4E2CA82EDCE3C8617DB302 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|SME 0020216294 E2E_ME_RFC_255 W A75C5EF7093960975F3BD2F3439F08D2 NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|SME 0020216294 E2E_ME_RFC_255 W 876055010DC7B9B9B838535BF1A303CF NONE DIA WP Resource Failure | 00 | 001 | S | 
|05.01.2010|12:30:01|TPP 0020283456 E2E_ME_RFC_ASYNC W 27C6C5A2C4A25C8B5CA58FA838976DA0 SOLMANDIAG DIA WP Resource Failure| 00 | 001 | S | 
and so on..
 
 
 
1.) I think that the job doesn't run right. 
2.) The jobs write every hour 100Mb in our Filesystem. 
 
Have anybody an idea, what my problem is and i can solve it? 
 
Thanks for help 
 
Olli

Hi Krishna
our ST version is SAPKITL430 and that's why the note is implemented.
In the screen of the Allocated Resources i see only two RFC Resources:
RFC Resources <NONE> Allocated <1> Total Capacity <1>
RFC Resources <SOLMAN_DIALOG_WORKPROCESSES> Allocated <1> Total Capacity <8>
Have you another idea
Regards
Oliver

Problem with the GridBagLayout Manager

Hello i am new to Java Swing and i am facing a problem with the GridBagLayout layout manager . the code in question is attached. First compile and run the code. It will execute w/o probs . Then go to the "Console" tab. There the diff components (6 buttons and 1 text area) are haphazardly arranged where as all measures where taken to prevent it in the code. The GridBagLayout manager for this tab is not working properly please help.
The code in question:-
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class MainForm extends JFrame{
     JTabbedPane jtp = new JTabbedPane();
     Container generalContainer; // container for the general pane
     Container consoleContainer; // container for the console pane
     GridBagLayout consoleLayout = new GridBagLayout(); // GridBagLayout for the console
     GridBagConstraints consoleConstraints;// GridBagConstraints for the console
     public MainForm()
          super("Welcome to Grey Griffin -- Network Simulator");
          setSize(700,600);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel generalPane = new JPanel();
          generalPane.setLayout(new BoxLayout(generalPane, BoxLayout.Y_AXIS));
          JPanel consolePane = new JPanel();
          consolePane.setLayout(new BoxLayout(consolePane, BoxLayout.Y_AXIS));
          JPanel designPane = new JPanel();
          designPane.setLayout(new BoxLayout(designPane, BoxLayout.Y_AXIS));
          JPanel outputPane = new JPanel();
          outputPane.setLayout(new BoxLayout(outputPane, BoxLayout.Y_AXIS));
          //Setting up Layout for all the tabs
           //for general tab
           FlowLayout layout= new FlowLayout();
           generalContainer = generalPane;
           layout.setAlignment(FlowLayout.CENTER);
           generalContainer.setLayout( layout );
           //for console tab
           consoleContainer = consolePane;
           consoleConstraints = new GridBagConstraints();
           // *******Finished********
          //********** All buttons text areas are declared here**********
            //*******for the general tab**********
          JButton generalCreate = new JButton("Create a New Network");
          JButton generalOpen = new JButton("Open an Existing Network");
          JButton generalSave = new JButton("Save the Network");
          JButton generalSaveAs = new JButton("Save As..........");
          JButton generalExit = new JButton("Exit");
          //******END******
         //*******for the console tab
             //text area
          JTextArea consoleCode = new JTextArea();
          consoleCode.setEditable(true);
          consoleCode.setMaximumSize(new Dimension(700,400));
          consoleCode.setAlignmentX(0.0f);
               //text area complete
             //*******for the Console tab**********
          JButton consoleCompile = new JButton("Compile Code");
          JButton consoleSimulate = new JButton("Simulate Code");
          JButton consoleReset = new JButton("Reset");
          JButton consoleOpen = new JButton("Open script files");
          JButton consoleSave = new JButton("Save script files");
          JButton consoleConvert = new JButton("Convert Script files to graphical form");
          //***************END****************
     //Adding buttons and text areas to there respective tabs
          // for the general tab
          generalContainer.add(generalCreate);
          generalContainer.add(generalOpen);
          generalContainer.add(generalSave);
          generalContainer.add(generalSaveAs);
         generalContainer.add(generalExit);
         //****END****
          // for the console tab
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleOpen,0,0,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleSave,1,1,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleConvert,1,2,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleCode,1,0,3,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleCompile,2,0,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleSimulate,2,1,1,1);
          consoleConstraints.fill = GridBagConstraints.BOTH;
          addComp(consoleReset,2,2,1,1);
          //****END****
          // adding the tabs
          jtp.addTab("General",null,generalPane,"Choose General Options");
          jtp.addTab("Design",null,designPane,"Design your own network!!");
          jtp.addTab("Console",null,consolePane,"Type commands in console for designing");
          jtp.addTab("Output",null,outputPane,"View output");
          getContentPane().add(jtp, BorderLayout.CENTER);
          //****END****
     //This method is used to ad the buttons in the GridBagLayout of the Console tab
     private void addComp( Component c,int row,int column,int width,int height)
        // set gridx and gridy
        consoleConstraints.gridx=column;
        consoleConstraints.gridy=row;
        //set gridwidth and grid height
        consoleConstraints.gridwidth=width;
        consoleConstraints.gridheight=height;
        //set constraints
        consoleLayout.setConstraints(c,consoleConstraints);
        consoleContainer.add(c);
     class TabManager implements ItemListener
          Component tab;
          public TabManager(Component tabToManage)
               tab = tabToManage;
     public void itemStateChanged(ItemEvent ie)
          int index=jtp.indexOfComponent(tab);
         if (index!=-1)
              jtp.setEnabledAt(index,ie.getStateChange()== ItemEvent.SELECTED);
         MainForm.this.repaint();
public static void main(String args[])
     MainForm form = new MainForm();
     form.setVisible(true);
}

Thanks for the suggestions. I did away with the GridBagLayout Altogether :-D
and put all the buttons in a seperate JPanel and added that JPanel into the Console tabs container which was using a BorderLayout this time. Take a look
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class MainForm extends JFrame{
     JTabbedPane jtp = new JTabbedPane();
     public MainForm()
          super("Welcome to Grey Griffin -- Network Simulator");
          setSize(800,600);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          JPanel generalPane = new JPanel();
          generalPane.setLayout(new BoxLayout(generalPane, BoxLayout.Y_AXIS));
          JPanel consolePane = new JPanel();
          consolePane.setLayout(new BoxLayout(consolePane, BoxLayout.Y_AXIS));
          JPanel designPane = new JPanel();
          designPane.setLayout(new BoxLayout(designPane, BoxLayout.Y_AXIS));
          JPanel outputPane = new JPanel();
          outputPane.setLayout(new BoxLayout(outputPane, BoxLayout.Y_AXIS));
          //Setting up Layout for all the tabs
          //**for the general tab
           Container generalContainer;
           FlowLayout layoutGeneral= new FlowLayout();
           generalContainer = generalPane;
           layoutGeneral.setAlignment(FlowLayout.CENTER);
           generalContainer.setLayout( layoutGeneral );
           //**for the console tab
            Container consoleContainer;
            consoleContainer = consolePane;
            consoleContainer.setLayout(new BorderLayout() );
           //Creating buttonpanel for adding the buttons
            JPanel buttonPanel1 = new JPanel();
            buttonPanel1.setLayout(new GridLayout(1,3));
            JPanel buttonPanel2 = new JPanel();
            buttonPanel2.setLayout(new GridLayout(1,3));
          // All buttons / text areas / images are declared here
          //**Buttons for the general tab**//
          JButton generalCreate = new JButton("Create a New Network");
          JButton generalOpen = new JButton("Open an Existing Network");
          JButton generalSave = new JButton("Save the Network");
          JButton generalSaveAs = new JButton("Save As..........");
          JButton generalExit = new JButton("Exit");
          //declaring the buttons
          JButton consoleCompile = new JButton("Compile");
          JButton consoleRun = new JButton("Run");
          JButton consoleReset = new JButton("Reset");
          JButton consoleOpen = new JButton("Open script files");
          JButton consoleSave = new JButton("Save script files");
          JButton consoleConvert = new JButton("Convert Script files to graphical form");
          //declares the textarea where the code is written
          JTextArea consoleCode = new JTextArea();
          consoleCode.setEditable(true);
          consoleCode.setMaximumSize(new Dimension(500,600));
          consoleCode.setAlignmentX(0.0f);
          //Adding buttons and text areas to there respective tabs
          //**Buttons and text pads for the general tab**
               generalContainer.add(generalCreate);
          generalContainer.add(generalOpen);
          generalContainer.add(generalSave);
          generalContainer.add(generalSaveAs);
             generalContainer.add(generalExit);
          //adding buttons to the button panel 1
          buttonPanel1.add(consoleOpen);
          buttonPanel1.add(consoleSave);
          buttonPanel1.add(consoleConvert);
          //adding buttons to the button panel2
          buttonPanel2.add(consoleRun);
          buttonPanel2.add(consoleReset);
          buttonPanel2.add(consoleCompile);
          //adding button panels and textarea
          consoleContainer.add(buttonPanel1,BorderLayout.NORTH);
          consoleContainer.add(consoleCode,BorderLayout.CENTER);
          consoleContainer.add(new JScrollPane(consoleCode));
          consoleContainer.add(buttonPanel2,BorderLayout.SOUTH);
          //adding the tabs
          jtp.addTab("General",null,generalPane,"Choose General Options");
          jtp.addTab("Design",null,designPane,"Design your own network!!");
          jtp.addTab("Console",null,consolePane,"Type commands in console for designing");
          jtp.addTab("Output",null,outputPane,"View output");
          getContentPane().add(jtp, BorderLayout.CENTER);
     class TabManager implements ItemListener
          Component tab;
          public TabManager(Component tabToManage)
               tab = tabToManage;
     public void itemStateChanged(ItemEvent ie)
          int index=jtp.indexOfComponent(tab);
         if (index!=-1)
              jtp.setEnabledAt(index,ie.getStateChange()== ItemEvent.SELECTED);
         MainForm.this.repaint();
public static void main(String args[])
     MainForm form = new MainForm();
     form.setVisible(true);
}

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.

I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.
Can you help?

Hi Marv13, disregard my last post. The 6520 does have eFax capabilities and the support document I provided a link to needs updating. If you contact HP Cloud Services phone support they will be able to resolve this issue for you. The number and available times are posted below:
HP Cloud Services
1-855-785-2777
Hours of Operation
Monday-Friday 8am-11pm ET
Saturday 10am-6:30pm ET
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Problems with Firefox - unable to create a workset in the portal

Problems with Firefox - unable to create a workset in the portal.

Guys,
I am running mozilla firefoz 5.0 and the only option that is coming to me is to create folder in CA.
even though SAP recommands IE and allows portal from Mozilla, the later seems to have serious issues with Portal.
I remember working with several versions of mozilla, sometimes you right click, all option will come but you will be unable to choose options coz when u bring cursor to them they will skid here and there..
I hope no SAP note elobrates this as of now.
Ankur

Trial version problem with the wrie Create with the trial version

help me
trial version problem with the write Create with the trial version
i wanna delete the Create with the trail version

Publication on businCata I am sorry I do not understand your inquiry. Can you please restate your question? What Adobe software or service is your inquiry in relation too?

What do I do when I create a pdf and it says fatal error, there is a problem with the background task

What do I do when I create a pdf and it says fatal error, there is a problem with the background task

see Adobe Community: File Crashing on Output - printing/PDF/other

Problem with the audio when creating optimized media...

I am having a problem with the quality of my audio after I transcode the clip to optimized media. It sounds fine originally, and I have listened to the clips when I first import them, and they sound fine, it's only after they're optimized that they sound bad. There is a clicking sound that is randomly distributed throughout the clip. I thought at first that maybe this would be fixed after I published the content, as the whole point of optimized media was to make it lesser quality to improve performance while editing, but even when published the clicks could be heard distinctly. I tried editing the content with out optimizing the mdeia, but the editing is too slow as I am working with high quality media.
Has anyone had this problem? Anyone have an idea on how to I might be able to fix this?

One way would be to make sure the Preferences window under the Import tab says not to use optimized media. Then go to the timeline and Control Click the clip. Choose Reveal in Event Browser. This will select the clip in the event browser. The originally specified in and out points will be represented in the yellow border on the clip. Then in the File menu choose the Import ... Files and specify the original media. The clip in the event browser will be filled in again from the new import, and the timeline clip will also be replaced with the new material. In and out points will be honored and effects will still be in place on the timeline clip.
Now, I use this procedure to reconnect clips all the time ... I have not used it before to switch formats from optimized to original media so there is a little guessing here on my part. The option, of course, is to simply reimport from a camera archive or the camera of the SD card into a new clip then replace everything ... Again, this would need to be done having turned off the preference item to use optimized media. Hope this helps a little. Best wishes.
stephen

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Problems with the Proxy Programme--Please help

Hi All,
I have written a simple proxy server in the form of a servlet. I changed the proxy config of my browser to connect to this servlet hosted on the default context(http://localhost:8080) of the Tomcat 5.0.25 . Well , this servlet internally connects to the proxy of the corporate LAN . The logic that I have applied is as follows. The servlet gets the request from the client (ie the browser in this case) , extracts the headers and contents from the request, sets them to a new request that it forms and finally send this new request to the proxy. When the proxy responds, the servlet collects the response headers and contents adn writes them in its response. To sum up , this servlet transparently carries the requests and responses between the client(browser) and the corporate LAN proxy. Now the problem is this. Let's say , now I am accessing http://www.google.com.The browser sends a request to my servlet with the following headers as they are extracted by my servlet.
ProxyServer:::>posting request
ProxyServer:::>headerValue::> headerName = accept : headerValue=*/*
ProxyServer:::>headerValue::> headerName = referer : headerValue=http://www.google.com/
ProxyServer:::>headerValue::> headerName = accept-language : headerValue=en-us
ProxyServer:::>headerValue::> headerName = proxy-connection : headerValue=Keep-Alive
ProxyServer:::>headerValue::> headerName = user-agent : headerValue=Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; UB1.4_IE6.0_SP1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
ProxyServer:::>headerValue::> headerName = host : headerValue=www.google.com
ProxyServer:::>headerValue::> headerName = cookie : headerValue=PREF=ID=1be27c0a74f198ca:TM=1082058853:LM=1082058853:S=bu6ORrygzm8AUkm8
ProxyServer:::>postRequest
I set these headers into a new connection opened to the proxy and post a fresh request to the proxy,which, in turn responds with the following headers.
ProxyServer:::>posted request successfully
ProxyServer:::>writing response
ProxyServer:::>writeResponse-->headerName = Proxy-Connection : headerValue = [close]
ProxyServer:::>writeResponse-->headerName = Content-Length : headerValue = [257]
ProxyServer:::>writeResponse-->headerName = Date : headerValue = [Tue, 13 Jul 2004 14:01:40 GMT]
ProxyServer:::>writeResponse-->headerName = Content-Type : headerValue = [text/html]
ProxyServer:::>writeResponse-->headerName = Server : headerValue = [NetCache appliance (NetApp/5.5R2)]
ProxyServer:::>writeResponse-->headerName = Proxy-Authenticate : headerValue = [Basic realm="Charlotte - napxyclt2"]
ProxyServer:::>writeResponse-->headerName = null : headerValue = [HTTP/1.1 407 Proxy Authentication Required]
ProxyServer:::>writeResponse exiting
ProxyServer:::>wrote response successfully
I write these headers back to the client. According to what I was thinking, the client ie the browser would open a new dialog box asking for username/password owing to the presence of the "Proxy-Authenticate " header. But it does not happen that way. Rather the browser stops responsding and displays a blank page. Does anyone know why it happens this way? I am pasting the server prog below for everybody's reference.
package server.proxy;
//import all servlet related classes
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.io.*;
import java.net.*;
import server.resources.*;
//My Proxy server --->Currently it is very simplea and relies on
//other proxy servers of an already connected network.
public class ProxyServer extends HttpServlet
//stores the resource bundle
private ServerResBundle resBundle = null;
//checks for the mode of operation
private boolean proxySet = false;
private String proxy = null;
//storing the original System out/err etc
private PrintStream sysOutOrig = null;
private PrintStream sysErrOrig = null;
private InputStream sysInOrig = null;
//initialise certain features that are required later
public void init() throws ServletException
try
//initialise the resource bundle
this.initResBundle();
System.out.println("ProxyServer:::>res bundle init");
//set the mode of operation
this.setMode();
System.out.println("ProxyServer:::>mode set");
//set the system out and err --System.setOut etc
this.setSystemOutErr();
System.out.println("ProxyServer:::>in/out/err set");
}//End try
catch(Exception e)
System.out.println("Exception in init..."+(e.getMessage()));
throw new ServletException(e);
}//Edn
catch(Throwable e)
System.out.println("Irrecoverable Error...");
throw new ServletException(e);
}//End
}//End init
//method to init the resource bundle;
private void initResBundle()
this.resBundle = ServerResBundle.getBundle();
}//End
//method to set the mode of the server--proxy or direct
private void setMode()
//read the target proxy property from the bundle and
//if it is set,take that URL
String temp = (String)(this.resBundle.getResource(ResKeys.PROXY_SERVER));
if ( (temp != null) && (temp.length() > 0) )
this.proxySet = true;
this.proxy = temp;
temp = null;
}//End
}//End
//method to set the system out and err etc
private void setSystemOutErr() throws Exception
//keep a copy of the original system out and error
this.sysOutOrig = System.out;
this.sysErrOrig = System.err;
try
//read the options adn if they are set, take the values directly
String newOutStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_OUT));
String newErrStr = (String)(this.resBundle.getResource(ResKeys.SYSTEM_ERR));
if ((newOutStr != null) && (newOutStr.length() > 0))
System.setOut(new PrintStream(new FileOutputStream(new File(newOutStr),true),true));
}//End if
if ((newErrStr != null) && (newErrStr.length() > 0))
System.setErr(new PrintStream(new FileOutputStream(new File(newErrStr),true),true));
}//End if
}//End
catch(Exception e)
//restore the stuff
System.setOut(this.sysOutOrig);
System.setErr(this.sysErrOrig);
}//End
}//End
//this is where the proxy functionalities will be embedded
public void service(HttpServletRequest req,HttpServletResponse resp)
throws ServletException,java.io.IOException
//conenction URL
URL target = null;
//conenction to the remote object
URLConnection targetConn = null;
//stores the OOS and the OIS
ObjectOutputStream oos = null;
ObjectInputStream ois = null;
try
//check for the mode of operation
if (proxySet)
URLConnection objects go through two phases: first they are created, then they are connected.
After being created, and before being connected, various options can be specified
(e.g., doInput and UseCaches). After connecting, it is an error to try to set them.
Operations that depend on being connected, like getContentLength, will implicitly perform the connection,
if necessary.
//for the URL to the proxy
target=new URL(this.proxy);
//conenct to the proxy
targetConn = target.openConnection();
//set the details of the connectuon
targetConn.setDoInput(true);
targetConn.setDoOutput(true);
targetConn.setUseCaches(false);
// If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed
targetConn.setAllowUserInteraction(true);
//connect to the remote object
// targetConn.connect();//call this only when all the request properties are set
System.out.println("ProxyServer:::>posting request");
//post the received request to the URL
this.postRequest(targetConn,req);
System.out.println("ProxyServer:::>posted request successfully");
System.out.println("ProxyServer:::>writing response");
//receive the response
//write the received response to the client
this.writeResponse(targetConn,resp);
System.out.println("ProxyServer:::>wrote response successfully");
}//End if
else
//currently this functionality is not supported
throw new ServletException(
(String)(this.resBundle.getResource(ResKeys.ERR_FUNC_NOTSUPPORTED)));
}//End
}//End try
catch(Exception e)
if(e instanceof ServletException)
throw (ServletException)e;
}//End
if (e instanceof IOException)
throw (IOException)e;
}//End
//wrap it up in ServletException
throw new ServletException(e);
}//End
}//End
//method to write the response back to the client
private void writeResponse(URLConnection targetConn,HttpServletResponse resp)
throws ServletException
//get all the header fields from the response connection and set them to the
//response of the servlet
Map headerFields = null;
Iterator headerFieldEntries = null;
Map.Entry header = null;
//stores the input stream to the conn
BufferedReader brConn = null;
//stores the writer to the response
PrintWriter prResp = null;
//checks if the proxy authentication needed or not
boolean proxyAuthReqd = false;
try
//juste ensuring that the proxy authentication is reset
proxyAuthReqd = false;
if( (targetConn != null) && (resp != null) )
//Returns an unmodifiable Map of the header fields.
//The Map keys are Strings that represent the response-header field names.
//Each Map value is an unmodifiable List of Strings that represents the corresponding
//field values
headerFields = targetConn.getHeaderFields();
//Returns a set view of the mappings contained in this map
Set temp = headerFields.entrySet();
//Returns an iterator over the elements in this set
headerFieldEntries = temp.iterator();
if (headerFieldEntries != null)
while (headerFieldEntries.hasNext())
Object tempHeader = headerFieldEntries.next();
if (tempHeader instanceof Map.Entry)
header = (Map.Entry)tempHeader;
Object headerName = header.getKey();
Object headerValue=header.getValue();
System.out.println("ProxyServer:::>writeResponse-->headerName = "+headerName+" : headerValue = "+headerValue);
//do not select the key-value pair if both the key adn the value are null
if ( ( headerName == null) && (headerValue == null) )
continue;
}//Enmd
if (headerValue != null)
List headerValList = null;
if (headerValue instanceof List)
headerValList = (List)headerValue;
}//End
if(headerValList != null)
for (int i=0;i<headerValList.size();i++)
Object headerValueStr = headerValList.get(i);
if (headerValueStr instanceof String)
//note that the header-key can not be null for addHeader
//I have made this temporary provision to make the programme work.
resp.addHeader(( (headerName==null)? ("null_header"+i) :(String)headerName),
(String)headerValueStr);
//check if the proxy authentication required or not
if (((String)headerValueStr).
indexOf(resp.SC_PROXY_AUTHENTICATION_REQUIRED+"") != -1)
System.out.println("ProxyServer:::>writeResponse-->proxy auth needed");
//proxy authentication is needed
proxyAuthReqd = true;
}//End
}//Ednd of
else if (headerValueStr == null)
resp.addHeader(( (headerName==null)? null :(String)headerName),
null);
}//End
}//End for
}//End if
}//End if
}//End
}//End while
}//End if
//get the writer to the client
prResp = resp.getWriter();
System.out.println("ProxyServer:::>writeResponse-->proxyAuthReqd="+proxyAuthReqd);
//juste test a simple header
System.out.println("Proxy-Authenticate = "+(resp.containsHeader("Proxy-Authenticate")));
//if the proxy asks you for authentication,pass on the same to the client
//from whom you have received the request.When this flag is true,the connection
//is closed by the remotehost adn hence any attempt to open in input steram
//results in an error ie IOException
if (!proxyAuthReqd)
//now get the content adn write it to the response too
brConn = new BufferedReader(new InputStreamReader(
targetConn.getInputStream()));
String tempStr = null;
while ((tempStr = brConn.readLine())!=null)
prResp.println(tempStr);
}//End while
//close the connections
brConn.close();
}//End if
else
prResp.println("Proxy Authentication needed...");
}//End
//close the streams
prResp.flush();
prResp.close();
}//End if
System.out.println("ProxyServer:::>writeResponse exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
//method to post request to the internet
private void postRequest(URLConnection targetConn,HttpServletRequest req)
throws ServletException
//extract the header parameters and the body content from the incoming request
//and set them to the new connection
Enumeration reqHeaders = null;
//reads the incoming request's content
BufferedReader brReqRd = null;
PrintWriter prResWt = null;
//stores temp header names and values
String headerName = null;
String headerValue = null;
try
if( (targetConn != null) && (req != null) )
reqHeaders = req.getHeaderNames();
//extract a header adn set it to the new connection
while (reqHeaders.hasMoreElements())
headerName = (String)(reqHeaders.nextElement());
headerValue = req.getHeader(headerName);
targetConn.setRequestProperty(headerName,headerValue);
System.out.println("ProxyServer:::>headerValue::> headerName = "+headerName+" : headerValue="+headerValue);
}//End
System.out.println("ProxyServer:::>postRequest\n");
//establis the actual connection
//calling this method bfore the above loop results in IllegalStateException
targetConn.connect();
//NOTE : try reading from and writing into OIS and OOS respectively
//now read the contents and write them to the connection
// brReqRd = req.getReader(); //this hangs for some reason
brReqRd = new BufferedReader(new InputStreamReader(req.getInputStream()));
System.out.println("Got the reader..brReqRd = "+brReqRd);
if (brReqRd != null)
String temp = null;
//establish the printwriter
// prResWt = new PrintWriter(targetConn.getOutputStream(),true);
prResWt = new PrintWriter(targetConn.getOutputStream());
System.out.println("trying to read in a loop from brReqRd.. ready="+(brReqRd.ready()));
while( (brReqRd.ready()) && ((temp=brReqRd.readLine()) != null) )
System.out.println("In while::>temp = "+temp);
prResWt.println(temp);
}//Emd while
//close the streams adn go back
brReqRd.close();
prResWt.flush();
prResWt.close();
}//End
}//End outer if
System.out.println("ProxyServer:::>postRequest exiting\n");
}//End try
catch(Exception e)
throw new ServletException(e);
}//End
}//End
}//End

Hi serlank ,
Thanks for your reply. Well , I initially I thought of not pasting the code,as it was too long. But I could not help it,as I thought I must show in code what I exactly meant. That's why I followed a description of my problem with the code. You could probably have copied the code and pasted it in one of your favourite editors to take a look at it. Did you,by any chance, try to read it on the browser? And as regards reposting the same message, I can say that I did it as I felt the subject was not quite appropriate in the first posting and I was not sure as to how I could delete/alter the posting. I am not asking for a code-fix,but some suggestions from some one who might ever have come across such a thing.Anyway, lemme know if you have any idea on it. Thanks...

Problem with the NodeManager in Weblogic 10.0 MP1

Hi,
I have a problem starting the Nodemanager successfully. I have currently installed BEA Weblogic 10.0 MP1. The admin server is getting started successfully. When, I start the Nodemanager with the command:
startnodemanager -machine <hostname>, it neither gives the success message nor the error message. It comes to a stand still. Please see the below text, which appears on the Command prompt, when I run the nodemanager command.
Machine PUNITP128166D.ad.infosys.com
Listen Address: PUNITP128166D.ad.infosys.com
Listen Port: 8097
PID for D:\Ariba9r1\shared/bin/startNodeManager.cmd: 5980
D:\Ariba9r1\BuyerDev9r1\Server\bin>
D:\Ariba9r1\BuyerDev9r1\Server>set CLASSPATH=D:\BEA10\wlserver_10.0\server\lib\A
ribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib\tools.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;
D:\Ariba9r1\BuyerDev9r1\Server>chdir /d "D:\Ariba9r1\shared\nodemanager"
D:\Ariba9r1\shared\nodemanager>"D:\BEA10\jdk150_11\bin\java.exe" -client -Xms32m
-Xmx200m -XX:MaxPermSize=128m -XX:+UseSpinning -Xverify:none -classpath "D:\BE
A10\wlserver_10.0\server\lib\AribaWebLogic81Patches.jar;.;D:\BEA10\jdk150_11\lib
\tools.jar;D:\BEA10\wlserver_10.0\server\lib\weblogic_sp.jar;D:\BEA10\wlserver_1
0.0\server\lib\weblogic.jar;" -Dbea.home=D:\BEA10 -Djava.security.policy=D:\BEA1
0\wlserver_10.0\server\lib\weblogic.policy -DSavedLogsDirectory=D:\Ariba9r1\shar
ed\nodemanager\logs -DJavaHome=D:\BEA10\jdk150_11 -DTrustedHosts=D:\BEA10\wlserv
er_10.0\common\nodemanager\config\nodemanager.hosts -DListenAddress=PUNITP128166
D.ad.infosys.com -DListenPort=8097 -DReverseDnsEnabled=true -DLogToStderr=true -
DLogFile=D:\Ariba9r1\shared\nodemanager\nodemanager.log -DNodeManagerHome=D:\Ari
ba9r1\shared\nodemanager weblogic.NodeManager
After this, when I check the nodemanager status in Console, then the status appears as REACHABLE. Assuming, this to be the successfully message, I try to start the managed servers associated with the Machine/Server. But, it fails and there appears a message on the console with the status as 'Force Shutting Down' for this server.
When I check the logs, there seems to be some problem with the Nulll exception. Please see the below logs as it appears, its only a part of the logs
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<Jun 28, 2010 4:20:25 PM IST> <Info> <JMS> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722225995> <BEA-040306> <JMS service is active now.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281003> <SAF Service has been initialized.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <SAFService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226041> <BEA-281002> <SAF Service has been started.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226120> <BEA-101128> <Initializing HTTP services.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101135> <buyerserver1 is the default Web server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101052> <[HttpServer (defaultWebserver) name: buyerserver1] Initialized>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226135> <BEA-101129> <Initializing the Web application container.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226198> <BEA-180046> <INFO: Logging service enabled.>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC license service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC security service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Debug> <WTC> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226213> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebService> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226229> <BEA-220027> <Web Service reliable agents are started on the server.>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <JMX> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226604> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://PUNITP128166D.ad.infosys.com:8050/jndi/weblogic.management.mbeanservers.runtime .>
####<Jun 28, 2010 4:20:26 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722226651> <BEA-000287> <Invoking startup class: ariba.j2ee.appserver.weblogic.Startup.startup(directory=D:\Ariba9r1\BuyerDev9r1\Server)>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <WebLogicServer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227229> <BEA-000288> <ariba.j2ee.appserver.weblogic.Startup reports: Changed directory to D:\Ariba9r1\BuyerDev9r1\Server>
####<Jun 28, 2010 4:20:27 PM IST> <Info> <Management> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722227244> <BEA-141187> <Java system properties are defined as follows:
ariba.server.home = D:\Ariba9r1\BuyerDev9r1\Server
awt.toolkit = sun.awt.windows.WToolkit
bea.home = D:\BEA10
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.headless = true
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBOracleJDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBDB2JDBC.zip;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions\aribaDBMssqlJDBC.zip;D:\BEA10\wlserver_10.0\server\lib\weblogic.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes;D:\Ariba9r1\BuyerDev9r1\Server\classes\AribaJ2EE.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\extensions;D:\BEA10\wlserver_10.0\server\lib\wls-api.jar
java.class.version = 49.0
java.endorsed.dirs = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed
java.ext.dirs = D:\BEA10\jdk150_11\jre\lib\ext
java.home = D:\BEA10\jdk150_11\jre
java.io.tmpdir = C:\DOCUME~1\suram_vishal\Local Settings\Temp\
java.library.path = D:\BEA10\jdk150_11\bin;.;C:\SYSROOT\system32;C:\SYSROOT;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\jdk150_11\bin;D:\BEA10\patch_wlw1001\profiles\default\native;D:\BEA10\patch_wls1001\profiles\default\native;D:\BEA10\wlserver_10.0\server\native\win\32;D:\BEA10\wlserver_10.0\server\bin;D:\BEA10\modules\org.apache.ant_1.6.5\bin;D:\BEA10\jdk150_11\jre\bin;D:\BEA10\jdk150_11\bin;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:/Ariba9r1/BuyerDev9r1/Server/bin/Win32;D:/Ariba9r1/BuyerDev9r1/Server/bin;C:\SYSROOT\system32;C:\SYSROOT;C:\SYSROOT\System32\Wbem;C:\Program Files\Java\jre1.5.0_06;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;D:\BEA10\wlserver_10.0\server\native\win\32\oci920_8;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\bin;D:\Ariba9r1\BuyerDev9r1\Server;D:\Ariba9r1\BuyerDev9r1\Server\lib\Win32;D:\Ariba9r1\BuyerDev9r1\Server\internal\lib\Win32
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.protocol.handler.pkgs = weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net
java.runtime.name = Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version = 1.5.0_11-b03
java.security.policy = D:\BEA10\wlserver_10.0\server\lib\weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.5
java.vendor = Sun Microsystems Inc.
java.vendor.url = http://java.sun.com/
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.5.0_11
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.5.0_11-b03
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
org.xml.sax.driver = weblogic.apache.xerces.parsers.SAXParser
org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
os.arch = x86
os.name = Windows 2003
os.version = 5.2
path.separator = ;
sun.arch.data.model = 32
sun.boot.class.path = D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\serializer.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xalan.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xercesImpl.jar;D:\Ariba9r1\BuyerDev9r1\Server\classes\endorsed\xml-apis.jar;D:\BEA10\jdk150_11\jre\lib\rt.jar;D:\BEA10\jdk150_11\jre\lib\i18n.jar;D:\BEA10\jdk150_11\jre\lib\sunrsasign.jar;D:\BEA10\jdk150_11\jre\lib\jsse.jar;D:\BEA10\jdk150_11\jre\lib\jce.jar;D:\BEA10\jdk150_11\jre\lib\charsets.jar;D:\BEA10\jdk150_11\jre\classes
sun.boot.library.path = D:\BEA10\jdk150_11\jre\bin
sun.cpu.endian = little
sun.desktop = windows
sun.io.unicode.encoding = UnicodeLittle
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = Cp1252
sun.management.compiler = HotSpot Client Compiler
sun.os.patch.level = Service Pack 2
user.country = US
user.dir = D:\Ariba9r1\BuyerDev9r1\Server
user.home = C:\Documents and Settings\suram_vishal
user.language = en
user.name = suram_vishal
user.timezone = Asia/Calcutta
vde.home = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\ldap
weblogic.Name = buyerserver1
weblogic.ReverseDNSAllowed = false
weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
weblogic.management.server = http://PUNITP128166D.ad.infosys.com:8099
weblogic.net.http.URLStreamHandlerFactory = ariba.util.net.URLStreamHandlerFactory
weblogic.nodemanager.ServiceEnabled = true
weblogic.security.SSL.ignoreHostnameVerification = true
weblogic.security.TrustKeyStore = DemoTrust
weblogic.system.BootIdentityFile = D:\BEA10\user_projects\VanillaBuyer\servers\buyerserver1\data\nodemanager\boot.properties
>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229510> <BEA-000365> <Server state changed to STANDBY>
####<Jun 28, 2010 4:20:29 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <main> <<WLS Kernel>> <> <> <1277722229525> <BEA-000365> <Server state changed to STARTING>
####<Jun 28, 2010 4:20:29 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722229572> <BEA-149209> <Resuming.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230182> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_NEW to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:30 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722230728> <BEA-149060> <Module Buyer of application Buyer successfully transitioned from STATE_PREPARED to STATE_ADMIN on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Warning> <HTTP> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-101162> <User defined listener ariba.server.ormsserver.ServletContextListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
 at java.util.Hashtable.put(Hashtable.java:396)
 at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)
 at ariba.j2ee.core.J2EEServer.initialize(J2EEServer.java:77)
 at ariba.j2ee.core.AribaServletContextListener.contextInitialized(AribaServletContextListener.java:25)
 at ariba.server.ormsserver.ServletContextListener.contextInitialized(ServletContextListener.java:26)
 at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:458)
 at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
 at weblogic.security.service.SecurityManager.runAs(Unknown Source)
 at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:168)
 at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1744)
 at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2909)
 at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:973)
 at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:361)
 at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
 at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
 at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
 at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
 at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
 at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
 at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
 at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
 at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
 at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
 at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:182)
 at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:359)
 at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
 at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
 at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
 at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
 at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
 at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
 at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
 at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Jun 28, 2010 4:20:35 PM IST> <Info> <Deployer> <punitp128166d> <buyerserver1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1277722235212> <BEA-149059> <Module Buyer of application Buyer is transitioning from STATE_ADMIN to STATE_PREPARED on server buyerserver1.>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
####<Jun 28, 2010 4:20:35 PM IST> <Alert> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
####<Jun 28, 2010 4:20:35 PM IST> <Notice> <WebLogicServer> <punitp128166d> <buyerserver1> <Thread-1> <<WLS Kernel>> <> <> <1277722235212> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Kindly help me in getting this resolved.
Thanks,
Vishal.

The error appears to come from the ariba code. I suggest asking them.
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at ariba.j2ee.weblogic.Properties.initialize(Properties.java:53)

Problem with the agent console created in the ESSO-Logon Manager 64 bits

Similar Messages

Maybe you are looking for