Problem with the ATI 200M graphics card in a Satellite A110-334

The computer is used both for office and home use (playing games, music etc)
Only one problem after 6 months of use, but I can't get around it.
When I start up Quake 3 all is well I can play for let's say 10-20 mins.
After that I get a Blue Screen of Death saying that there was some memory error connected with the graphic card.
Windows "tells me" to change the video card (it's not something i can do with a laptop ;) ) or to contact the hardware producer to change the bios because something could be wrong.
Well only think I could do on my own was to change the drivers (I found some compatible with my card) but that didn't help. I also tried to change the amount of onboard memory used by the card (It uses x amount of available RAM), but to no avail

Hi,
which drivers youre using?
Did you checked already these drivers out:
http://www.omegadrivers.net/
Maybe it helps. Otherwise you should send your machine to an authorized service partner for a hardware checkup since your machine is still in warranty and it wont cost you anything.
Heres a link to find the nearest ASP in your country:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Regards

Similar Messages

  • I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

    I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
    After five days of testing in the service they can not  found fault and it was decided to change the graphics card.
    New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
    Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

    You could look at the System Profile for the info it presents for the card.  But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
    What program are you trying to run?  Is there anything in the system log? 
    I think it's the program that's having the problem and not anything with your video software.

  • A Problem with the A205-S4597 video card

    Hi
    I need a video card for my laptop. A technician told me it only comes with the mother board. I wanna know if it's true or not, how can i get it, how much it cost.
    The problem with the computer is that it shows a lot of colors at windows startup and then it stops working, so, i took it to the technician and he told me the problem was the video card, but i have to buy the whole mother board, because it isn't sell alole.

    Yep.  The video is integrated into the motherboard so you would need to replace the motherboard on that model.  Unless you can do it yourself it will probably cost almost as much to fix it as it would to just buy another laptop. 
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • Problems with BIOS for new graphics card!!! HEEELP!!!!

    Hello,I just recently received my new graphics card (Gigabyte GeForce GTX 960), and I am having some troubles getting it to work with my computer (p7-1072sc). I go myself a new PSU (Crossair CX600M), istalled it properly, pluged all the components up and put in the new GPU. Every time I turn on the PC, it freezes at the blue HP loading screen and does not respond to any keys.After some google searching I found out that I most likley would have to update my BIOS, so I went to the HP homepage. Entered my modelnumber, downloaded the new BIOS update (My current version was 7.14 13.10.2011), the update said the version was 7.15 05.25.2013. I downloaded the exe file, closed all other programs and ran the file. I started out as normal, but as the main installationprocess started I got the message that hpprobar3 stoped working. The computer freezed for a short while and then I got the message that the new BIOS had bin successfully installed, so I restarted the comuter. After that I checked back on the systems information and the version had bin changed to 7.15, but the date was still 13.10.2011. I tried the same rpocess again and the same thing happened.  I ried again to put in the new GPU, and it still froze on the blue HP loading screen. I also tried to find the directory for the BIOS file (sp55548.exe) (to make a flash installation), under c:/swsetup, but I only found one folder named sp68021. Can anyone help me with this?? I would really appreciate any advice sort of advice!!!
    PS: I am pretty new to all this stuff, so please be patient and explain any technical informoation or terms.

    As stated before, and as a refresher. I just got off the line with MSI and EVGA.  What you have is a Legacy motherboard. It can not function with a UEFI BIOS graphic card. That said:MSI (Greg):  The 750Ti NF has a switch for Legacy/UEFI.  All others in the 700 series are UEFI.  The 900 series, plus the R7, R9 ship with the new VBIOS, a hybrid that detects the correct BIOS (Legacy/UEFI). EVGA (Kayon): All 600 and 700 except the 750Ti are Legacy. 

  • Does the ATI 5770 graphics card have compatibility problems with early 2008 Mac Pro?

    I have had advice from apple technical which contradicts the reviews on the web and on apple site? Apple say that the ATI 5770 is not compatibile while it seems that everyone else thinks it is?
    Technical support have pointed me to the follow link
    http://support.apple.com/kb/TS3891?locale=en_GB&viewlocale=en_GB
    Has anybody experienced this issue?
    All help appreciated
    (I know that I will have to upgrade OS)

    you want the summary of pros and cons?
    there is always the official - what we support, tested, marketing - that you can usually take with grain of salt (or two)
    there is an official article on support for pre-2010
    http://support.apple.com/kb/TS3891
    pre-2008 you will see Barefeats and users that PCIe 1.1 does limit the max bandwidth
    Google, Bing http://www.barefeats.com/wst10g5.html
    http://www.bing.com/search?setmkt=en-US&q=5770+performance
    support for 3 displays is always a problem
    Apple has taken the reference design with support for 2 x DVI and cut one out, and eliminated HDMI in favor of 2 x minidisplay ports.
    http://www.groths.org/?tag=5870
    I am not the best on GPU features but that is the ghist.

  • Problem with Intel/ATI Hybrid Graphics

    Hi, I Just got a new laptop with the intel(hd4400)/ati(hd8670m) hybrid graphics. I followed exactly this https://wiki.archlinux.org/index.php/Hy … ons_So_Far, trying to disable my discrete card, but I did not have vgaswitcheroo under /sys/kernel/debug. Then I did a reboot, it stopped booting after FSCK, no login for me. I did add radeon and i915 to MODULES in /etc/mkinitcpio.conf if that's what you are wondering. I had to chroot with Arch installer and add a basic 20-intel.conf file to be able to boot into my DE.
    dmesg output below shows that I had radeon loaded, but still no vgaswitcheroo directory.
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg_tf-lv_root rw quiet radeon.dpm=1
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009a36efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009a36f000-0x000000009aebefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem02: type=0, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001051000) (15MB)
    [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000001051000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f51000) (15MB)
    [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000002f51000-0x000000003737a000) (836MB)
    [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000003737a000-0x00000000379b5000) (6MB)
    [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000379b5000-0x000000006d8c0000) (863MB)
    [ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000006d8c0000-0x0000000092d70000) (596MB)
    [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000092d70000-0x0000000092d90000) (0MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000092d90000-0x0000000093ee1000) (17MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000093ee1000-0x0000000094d60000) (14MB)
    [ 0.000000] efi: mem16: type=0, attr=0xf, range=[0x0000000094d60000-0x0000000095d60000) (16MB)
    [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x0000000095d60000-0x0000000095f52000) (1MB)
    [ 0.000000] efi: mem18: type=1, attr=0xf, range=[0x0000000095f52000-0x0000000095f6f000) (0MB)
    [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000095f6f000-0x0000000097260000) (18MB)
    [ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x0000000097260000-0x0000000097262000) (0MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x0000000097262000-0x0000000097272000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x0000000097272000-0x000000009727c000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x000000009727c000-0x0000000097c77000) (9MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000097c77000-0x0000000097c7a000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000097c7a000-0x0000000097c81000) (0MB)
    [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000097c81000-0x0000000097c82000) (0MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000097c82000-0x0000000097db2000) (1MB)
    [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000097db2000-0x0000000097db3000) (0MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000097db3000-0x0000000097e0a000) (0MB)
    [ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x0000000097e0a000-0x0000000097e17000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000097e17000-0x0000000097e1f000) (0MB)
    [ 0.000000] efi: mem32: type=3, attr=0xf, range=[0x0000000097e1f000-0x0000000097e20000) (0MB)
    [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000097e20000-0x0000000097e2c000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x0000000097e2c000-0x0000000097e34000) (0MB)
    [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000097e34000-0x0000000097e4c000) (0MB)
    [ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x0000000097e4c000-0x0000000097e4d000) (0MB)
    [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000097e4d000-0x0000000097e50000) (0MB)
    [ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x0000000097e50000-0x0000000097e57000) (0MB)
    [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000097e57000-0x0000000097e6e000) (0MB)
    [ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x0000000097e6e000-0x0000000097ee9000) (0MB)
    [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000097ee9000-0x0000000097efc000) (0MB)
    [ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000097efc000-0x0000000097efd000) (0MB)
    [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000097efd000-0x0000000097f0b000) (0MB)
    [ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x0000000097f0b000-0x0000000097f0d000) (0MB)
    [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000097f0d000-0x000000009810f000) (2MB)
    [ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x000000009810f000-0x0000000098111000) (0MB)
    [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000098111000-0x0000000099f6f000) (30MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000099f6f000-0x000000009a36f000) (4MB)
    [ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x000000009a36f000-0x000000009a56f000) (2MB)
    [ 0.000000] efi: mem50: type=6, attr=0x800000000000000f, range=[0x000000009a56f000-0x000000009aabf000) (5MB)
    [ 0.000000] efi: mem51: type=0, attr=0xf, range=[0x000000009aabf000-0x000000009aebf000) (4MB)
    [ 0.000000] efi: mem52: type=10, attr=0xf, range=[0x000000009aebf000-0x000000009afbf000) (1MB)
    [ 0.000000] efi: mem53: type=9, attr=0xf, range=[0x000000009afbf000-0x000000009afff000) (0MB)
    [ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000009afff000-0x000000009b000000) (0MB)
    [ 0.000000] efi: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000015f600000) (1526MB)
    [ 0.000000] efi: mem56: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem57: type=0, attr=0x0, range=[0x000000009b000000-0x000000009fa00000) (74MB)
    [ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [ 0.000000] efi: mem59: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
    [ 0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb10000) (0MB)
    [ 0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
    [ 0.000000] efi: mem63: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fed20000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem65: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A05 08/30/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x15f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
    [ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable
    [ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable
    [ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
    [ 0.000000] 5 base 0100000000 mask 7F80000000 write-back
    [ 0.000000] 6 base 015F600000 mask 7FFFE00000 uncachable
    [ 0.000000] 7 base 015F800000 mask 7FFF800000 uncachable
    [ 0.000000] 8 base 0160000000 mask 7FE0000000 uncachable
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff88000007e000] 7e000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
    [ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
    [ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15f400000-0x15f5fffff]
    [ 0.000000] [mem 0x15f400000-0x15f5fffff] page 2M
    [ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x15c000000-0x15f3fffff]
    [ 0.000000] [mem 0x15c000000-0x15f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
    [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
    [ 0.000000] [mem 0x140000000-0x15bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x94d5ffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x94bfffff] page 2M
    [ 0.000000] [mem 0x94c00000-0x94d5ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x95d60000-0x9a36efff]
    [ 0.000000] [mem 0x95d60000-0x95dfffff] page 4k
    [ 0.000000] [mem 0x95e00000-0x9a1fffff] page 2M
    [ 0.000000] [mem 0x9a200000-0x9a36efff] page 4k
    [ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
    [ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9afff000-0x9affffff]
    [ 0.000000] [mem 0x9afff000-0x9affffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x3737a000-0x379b4fff]
    [ 0.000000] ACPI: RSDP 000000009affe014 00024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 000000009affe210 000AC (v01 DELL CL09 00000001 01000013)
    [ 0.000000] ACPI: FACP 000000009aff8000 0010C (v05 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130517/tbfadt-202)
    [ 0.000000] ACPI: DSDT 000000009afe9000 0B8AC (v01 DELL CL09 00000000 ASL 00040000)
    [ 0.000000] ACPI: FACS 000000009afb8000 00040
    [ 0.000000] ACPI: SLIC 000000009affd000 00176 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: UEFI 000000009affc000 00236 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: FPDT 000000009affa000 00044 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: ASF! 000000009aff9000 000A5 (v32 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: HPET 000000009aff7000 00038 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: APIC 000000009aff6000 0008C (v03 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: MCFG 000000009aff5000 0003C (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: SSDT 000000009afe8000 006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 000000009afe6000 00028 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: ASPT 000000009afe4000 00034 (v07 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: DBGP 000000009afe3000 00034 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: SSDT 000000009afdd000 00539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afdc000 00AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd8000 0343C (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 000000009afd5000 01E3D (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 000000009afd7000 00038 (v01 DELL CL09 00000001 ASL 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15f5fffff]
    [ 0.000000] NODE_DATA [mem 0x15f5f8000-0x15f5fcfff]
    [ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015ac00000-ffff88015ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x15f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0006efff]
    [ 0.000000] node 0: [mem 0x00070000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x94d5ffff]
    [ 0.000000] node 0: [mem 0x95d60000-0x9a36efff]
    [ 0.000000] node 0: [mem 0x9afff000-0x9affffff]
    [ 0.000000] node 0: [mem 0x100000000-0x15f5fffff]
    [ 0.000000] On node 0 totalpages: 1018102
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 22 pages reserved
    [ 0.000000] DMA zone: 3974 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9742 pages used for memmap
    [ 0.000000] DMA32 zone: 623472 pages, LIFO batch:31
    [ 0.000000] Normal zone: 6104 pages used for memmap
    [ 0.000000] Normal zone: 390656 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 56
    [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9a36f000-0x9aebefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88015f200000 s86528 r8192 d24064 u262144
    [ 0.000000] pcpu-alloc: s86528 r8192 d24064 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1002170
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vg_tf-lv_root rw quiet radeon.dpm=1
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3856592K/4072408K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 215816K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2294.570 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.35 BogoMIPS (lpj=7648566)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000040] init_memory_mapping: [mem 0x9a36f000-0x9a56efff]
    [ 0.000042] [mem 0x9a36f000-0x9a56efff] page 4k
    [ 0.000064] init_memory_mapping: [mem 0x9a56f000-0x9aabefff]
    [ 0.000066] [mem 0x9a56f000-0x9a5fffff] page 4k
    [ 0.000067] [mem 0x9a600000-0x9a9fffff] page 2M
    [ 0.000069] [mem 0x9aa00000-0x9aabefff] page 4k
    [ 0.059748] Security Framework initialized
    [ 0.059759] AppArmor: AppArmor disabled by boot time parameter
    [ 0.059761] Yama: becoming mindful.
    [ 0.060120] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.061320] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.061810] Mount-cache hash table entries: 256
    [ 0.062052] Initializing cgroup subsys memory
    [ 0.062063] Initializing cgroup subsys devices
    [ 0.062065] Initializing cgroup subsys freezer
    [ 0.062067] Initializing cgroup subsys net_cls
    [ 0.062069] Initializing cgroup subsys blkio
    [ 0.062098] CPU: Physical Processor ID: 0
    [ 0.062100] CPU: Processor Core ID: 0
    [ 0.062105] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.063398] mce: CPU supports 7 MCE banks
    [ 0.063415] CPU0: Thermal monitoring enabled (TM1)
    [ 0.063429] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.063562] Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
    [ 0.064699] ACPI: Core revision 20130517
    [ 0.077923] ACPI: All ACPI Tables successfully acquired
    [ 0.083767] ftrace: allocating 20100 entries in 79 pages
    [ 0.096243] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.129231] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
    [ 0.129240] TSC deadline timer enabled
    [ 0.129252] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.129261] ... version: 3
    [ 0.129262] ... bit width: 48
    [ 0.129263] ... generic registers: 4
    [ 0.129265] ... value mask: 0000ffffffffffff
    [ 0.129267] ... max period: 0000ffffffffffff
    [ 0.129268] ... fixed-purpose events: 3
    [ 0.129269] ... event mask: 000000070000000f
    [ 0.167457] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.152681] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.209878] Brought up 4 CPUs
    [ 0.209882] smpboot: Total of 4 processors activated (18363.41 BogoMIPS)
    [ 0.215147] devtmpfs: initialized
    [ 0.216459] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
    [ 0.217451] RTC time: 2:22:13, date: 11/08/13
    [ 0.217501] NET: Registered protocol family 16
    [ 0.217661] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.217663] ACPI: bus type PCI registered
    [ 0.217666] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.217737] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.217740] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.252752] PCI: Using configuration type 1 for base access
    [ 0.252922] dmi type 0xB1 record - unknown flag
    [ 0.253726] bio: create slab <bio-0> at 0
    [ 0.253868] ACPI: Added _OSI(Module Device)
    [ 0.253870] ACPI: Added _OSI(Processor Device)
    [ 0.253872] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.253874] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.256659] ACPI: EC: Look up EC in DSDT
    [ 0.259524] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.272874] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.274013] ACPI: SSDT 000000009ae7dc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
    [ 0.274706] ACPI: Dynamic OEM Table Load:
    [ 0.274709] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
    [ 0.282313] ACPI: SSDT 000000009ae7d618 005AA (v01 PmRef ApIst 00003000 INTL 20130117)
    [ 0.283108] ACPI: Dynamic OEM Table Load:
    [ 0.283111] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20130117)
    [ 0.301675] ACPI: SSDT 000000009ae7cd98 00119 (v01 PmRef ApCst 00003000 INTL 20130117)
    [ 0.302368] ACPI: Dynamic OEM Table Load:
    [ 0.302370] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20130117)
    [ 0.431586] ACPI: Interpreter enabled
    [ 0.431597] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
    [ 0.431606] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    [ 0.431630] ACPI: (supports S0 S3 S4 S5)
    [ 0.431632] ACPI: Using IOAPIC for interrupt routing
    [ 0.431666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.431855] ACPI: No dock devices found.
    [ 0.634551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.634846] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.635302] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
    [ 0.635816] PCI host bridge to bus 0000:00
    [ 0.635820] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.635823] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.635825] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.635828] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.635830] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.635832] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.635834] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.635836] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.635838] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.635840] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.635842] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.635844] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.635846] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.635848] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.635850] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.635852] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.635854] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.635856] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 0.635867] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.636037] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.636053] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
    [ 0.636062] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 0.636069] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 0.636232] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.636243] pci 0000:00:03.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit]
    [ 0.636435] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.636456] pci 0000:00:14.0: reg 0x10: [mem 0xc0800000-0xc080ffff 64bit]
    [ 0.636523] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.636647] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.636693] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.636717] pci 0000:00:16.0: reg 0x10: [mem 0xc0818000-0xc081801f 64bit]
    [ 0.636795] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.636949] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.636965] pci 0000:00:1b.0: reg 0x10: [mem 0xc0814000-0xc0817fff 64bit]
    [ 0.637037] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.637182] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
    [ 0.637255] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.637400] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.637446] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.637518] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.637662] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 0.637734] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.637885] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.638879] pci 0000:00:1d.0: reg 0x10: [mem 0xc081c000-0xc081c3ff]
    [ 0.644729] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.644857] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.644903] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.645161] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.645179] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 0.645188] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 0.645196] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 0.645205] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 0.645213] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 0.645222] pci 0000:00:1f.2: reg 0x24: [mem 0xc081b000-0xc081b7ff]
    [ 0.645264] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.645401] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.645417] pci 0000:00:1f.3: reg 0x10: [mem 0xc0819000-0xc08190ff 64bit]
    [ 0.645440] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
    [ 0.645679] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
    [ 0.645710] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
    [ 0.645750] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc0700fff 64bit]
    [ 0.645779] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
    [ 0.645873] pci 0000:01:00.0: supports D1 D2
    [ 0.645875] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.652308] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.652312] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.652316] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
    [ 0.652322] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.652414] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
    [ 0.652447] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc067ffff 64bit]
    [ 0.652527] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.652608] pci 0000:02:00.0: supports D1 D2
    [ 0.652610] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.658964] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.658970] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
    [ 0.659066] pci 0000:03:00.0: [1002:6660] type 00 class 0x038000
    [ 0.659093] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.659113] pci 0000:03:00.0: reg 0x18: [mem 0xc0500000-0xc053ffff 64bit]
    [ 0.659127] pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
    [ 0.659154] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.659233] pci 0000:03:00.0: supports D1 D2
    [ 0.659235] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
    [ 0.665628] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.665632] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.665636] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
    [ 0.665642] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.665658] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.726347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726411] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726470] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726529] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726646] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726705] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.726765] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.727383] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.727392] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.727488] Found 1 acpi root devices
    [ 0.727533] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [ 0.727642] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.727647] vgaarb: loaded
    [ 0.727648] vgaarb: bridge control possible 0000:00:02.0
    [ 0.727700] PCI: Using ACPI for IRQ routing
    [ 0.734096] PCI: pci_cache_line_size set to 64 bytes
    [ 0.734149] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
    [ 0.734151] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.734152] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff]
    [ 0.734154] e820: reserve RAM buffer [mem 0x9a36f000-0x9bffffff]
    [ 0.734157] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
    [ 0.734158] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
    [ 0.734265] NetLabel: Initializing
    [ 0.734267] NetLabel: domain hash size = 128
    [ 0.734268] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.734282] NetLabel: unlabeled traffic allowed by default
    [ 0.734302] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.734309] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.736336] Switched to clocksource hpet
    [ 0.741791] pnp: PnP ACPI init
    [ 0.741808] ACPI: bus type PNP registered
    [ 0.741844] pnp 00:00: [dma 4]
    [ 0.741872] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.741898] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.742037] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.742091] system 00:03: [io 0x0680-0x069f] has been reserved
    [ 0.742094] system 00:03: [io 0xfd60-0xfd63] has been reserved
    [ 0.742096] system 00:03: [io 0xffff] has been reserved
    [ 0.742099] system 00:03: [io 0xffff] has been reserved
    [ 0.742101] system 00:03: [io 0xffff] has been reserved
    [ 0.742103] system 00:03: [io 0x1800-0x18fe] could not be reserved
    [ 0.742106] system 00:03: [io 0x164e-0x164f] has been reserved
    [ 0.742109] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.742169] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.742223] system 00:05: [io 0x1854-0x1857] has been reserved
    [ 0.742227] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.742290] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.742323] pnp 00:07: Plug and Play ACPI device, IDs DLL05eb PNP0f13 (active)
    [ 0.799825] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.799828] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.799831] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.799833] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.799836] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.799838] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.799840] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.799843] system 00:08: [mem 0xff000000-0xff000fff] has been reserved
    [ 0.799845] system 00:08: [mem 0xff010000-0xffffffff] could not be reserved
    [ 0.799848] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.799850] system 00:08: [mem 0x9fa22000-0x9fa22fff] has been reserved
    [ 0.799853] system 00:08: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [ 0.799856] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.800510] pnp: PnP ACPI: found 9 devices
    [ 0.800512] ACPI: bus type PNP unregistered
    [ 0.807188] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.807192] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.807227] pci 0000:00:1c.3: BAR 15: assigned [mem 0x9fb00000-0x9fbfffff pref]
    [ 0.807230] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.807234] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.807240] pci 0000:00:1c.0: bridge window [mem 0xc0700000-0xc07fffff]
    [ 0.807244] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.807251] pci 0000:02:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
    [ 0.807254] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.807259] pci 0000:00:1c.3: bridge window [mem 0xc0600000-0xc06fffff]
    [ 0.807263] pci 0000:00:1c.3: bridge window [mem 0x9fb00000-0x9fbfffff pref]
    [ 0.807270] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0540000-0xc055ffff pref]
    [ 0.807272] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.807275] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.807280] pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
    [ 0.807285] pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.807584] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.807586] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.807589] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.807591] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.807593] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.807595] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.807597] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.807599] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.807601] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.807603] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.807605] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.807607] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.807609] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.807611] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.807613] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.807615] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
    [ 0.807617] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
    [ 0.807619] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
    [ 0.807622] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
    [ 0.807624] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
    [ 0.807626] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
    [ 0.807628] pci_bus 0000:02: resource 2 [mem 0x9fb00000-0x9fbfffff pref]
    [ 0.807630] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.807632] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
    [ 0.807635] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.807677] NET: Registered protocol family 2
    [ 0.807890] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.808027] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.808127] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.808150] TCP: reno registered
    [ 0.808162] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.808181] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.808261] NET: Registered protocol family 1
    [ 0.808274] pci 0000:00:02.0: Boot video device
    [ 0.823082] PCI: CLS 64 bytes, default 64
    [ 0.823122] Unpacking initramfs...
    [ 0.982411] Freeing initrd memory: 6380K (ffff88003737a000 - ffff8800379b5000)
    [ 0.982417] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.982420] software IO TLB [mem 0x8ed70000-0x92d70000] (64MB) mapped at [ffff88008ed70000-ffff880092d6ffff]
    [ 0.982447] Simple Boot Flag at 0x44 set to 0x1
    [ 0.982626] Scanning for low memory corruption every 60 seconds
    [ 0.982970] audit: initializing netlink socket (disabled)
    [ 0.982981] type=2000 audit(1383877333.966:1): initialized
    [ 1.000018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.001570] zbud: loaded
    [ 1.001748] VFS: Disk quotas dquot_6.5.2
    [ 1.001801] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.001998] msgmni has been set to 7672
    [ 1.002265] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.002308] io scheduler noop registered
    [ 1.002311] io scheduler deadline registered
    [ 1.002344] io scheduler cfq registered (default)
    [ 1.002441] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
    [ 1.002526] pcieport 0000:00:1c.3: irq 57 for MSI/MSI-X
    [ 1.002598] pcieport 0000:00:1c.4: irq 58 for MSI/MSI-X
    [ 1.002681] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 1.002684] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 1.002688] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 1.002706] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
    [ 1.002708] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 1.002712] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
    [ 1.002728] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 1.002730] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 1.002734] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 1.002751] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.002769] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.002888] efifb: probing for efifb
    [ 1.003509] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90020e00000, using 4160k, total 4160k
    [ 1.003511] efifb: mode is 1366x768x32, linelength=5504, pages=1
    [ 1.003513] efifb: scrolling: redraw
    [ 1.003515] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.007477] Console: switching to colour frame buffer device 170x48
    [ 1.011265] fb0: EFI VGA frame buffer device
    [ 1.011272] intel_idle: MWAIT substates: 0x11142120
    [ 1.011274] intel_idle: v0.4 model 0x45
    [ 1.011275] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.011336] GHES: HEST is not enabled!
    [ 1.011398] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.011946] Linux agpgart interface v0.103
    [ 1.012027] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.032274] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.032308] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.032411] mousedev: PS/2 mouse device common for all mice
    [ 1.032672] rtc_cmos 00:04: RTC can wake from S4
    [ 1.032819] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 1.032857] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.032871] Intel P-state driver initializing.
    [ 1.032884] Intel pstate controlling: cpu 0
    [ 1.032911] Intel pstate controlling: cpu 1
    [ 1.032923] Intel pstate controlling: cpu 2
    [ 1.032935] Intel pstate controlling: cpu 3
    [ 1.033105] cpuidle: using governor ladder
    [ 1.033295] cpuidle: using governor menu
    [ 1.033356] drop_monitor: Initializing network drop monitor service
    [ 1.033431] TCP: cubic registered
    [ 1.033524] NET: Registered protocol family 10
    [ 1.033688] NET: Registered protocol family 17
    [ 1.033697] Key type dns_resolver registered
    [ 1.033905] PM: Hibernation image not present or could not be loaded.
    [ 1.033915] registered taskstats version 1
    [ 1.034407] Magic number: 5:662:358
    [ 1.034483] rtc_cmos 00:04: setting system clock to 2013-11-08 02:22:14 UTC (1383877334)
    [ 1.035212] Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
    [ 1.035213] Write protecting the kernel read-only data: 8192k
    [ 1.037442] Freeing unused kernel memory: 1084K (ffff8800024f1000 - ffff880002600000)
    [ 1.038163] Freeing unused kernel memory: 352K (ffff8800027a8000 - ffff880002800000)
    [ 1.045866] systemd-udevd[57]: starting version 208
    [ 1.050291] [drm] Initialized drm 1.1.0 20060810
    [ 1.053926] [drm] radeon kernel modesetting enabled.
    [ 1.053955] checking generic (b0000000 410000) vs hw (a0000000 10000000)
    [ 1.053962] radeon 0000:03:00.0: enabling device (0000 -> 0003)
    [ 1.054153] [drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x1028:0x05EA).
    [ 1.054190] [drm] register mmio base: 0xC0500000
    [ 1.054191] [drm] register mmio size: 262144
    [ 1.055856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.982382] tsc: Refined TSC clocksource calibration: 2294.688 MHz
    [ 2.566653] ATOM BIOS: Dell
    [ 2.566668] [drm] GPU not posted. posting now...
    [ 2.570040] radeon 0000:03:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
    [ 2.570042] radeon 0000:03:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
    [ 2.570044] [drm] Detected VRAM RAM=1024M, BAR=256M
    [ 2.570045] [drm] RAM width 64bits DDR
    [ 2.570094] [TTM] Zone kernel: Available graphics memory: 1965320 kiB
    [ 2.570095] [TTM] Initializing pool allocator
    [ 2.570099] [TTM] Initializing DMA pool allocator
    [ 2.570117] [drm] radeon: 1024M of VRAM memory ready
    [ 2.570118] [drm] radeon: 512M of GTT memory ready.
    [ 2.570129] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 2.570456] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
    [ 2.570460] [drm] PCIE gen 2 link speeds already enabled
    [ 2.570620] [drm] Loading HAINAN Microcode
    [ 2.981834] Switched to clocksource tsc
    [ 2.993997] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 2.994098] radeon 0000:03:00.0: WB enabled
    [ 2.994100] radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880156e63c00
    [ 2.994102] radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880156e63c04
    [ 2.994103] radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880156e63c08
    [ 2.994104] radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880156e63c0c
    [ 2.994106] radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880156e63c10
    [ 2.994107] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.994108] [drm] Driver supports precise vblank timestamp query.
    [ 2.994126] radeon 0000:03:00.0: irq 59 for MSI/MSI-X
    [ 2.994137] radeon 0000:03:00.0: radeon: using MSI.
    [ 2.994157] [drm] radeon: irq initialized.
    [ 3.013688] [drm] ring test on 0 succeeded in 1 usecs
    [ 3.013694] [drm] ring test on 1 succeeded in 1 usecs
    [ 3.013698] [drm] ring test on 2 succeeded in 1 usecs
    [ 3.013761] [drm] ring test on 3 succeeded in 2 usecs
    [ 3.013770] [drm] ring test on 4 succeeded in 1 usecs
    [ 3.015377] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 3.015424] [drm] ib test on ring 1 succeeded in 0 usecs
    [ 3.015476] [drm] ib test on ring 2 succeeded in 0 usecs
    [ 3.015496] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 3.015517] [drm] ib test on ring 4 succeeded in 1 usecs
    [ 3.015656] [drm] Radeon Display Connectors
    [ 3.015663] [drm] Internal thermal controller without fan control
    [ 3.015712] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
    [ 3.015739] == power state 0 ==
    [ 3.015740] ui class: none
    [ 3.015742] internal class: boot
    [ 3.015744] caps:
    [ 3.015746] uvd vclk: 0 dclk: 0
    [ 3.015748] power level 0 sclk: 30000 mclk: 29900 vddc: 900 vddci: 0 pcie gen: 2
    [ 3.015749] status: c r b
    [ 3.015752] == power state 1 ==
    [ 3.015753] ui class: performance
    [ 3.015754] internal class: none
    [ 3.015756] caps:
    [ 3.015758] uvd vclk: 0 dclk: 0
    [ 3.015760] power level 0 sclk: 30000 mclk: 30000 vddc: 800 vddci: 0 pcie gen: 2
    [ 3.015761] power level 1 sclk: 40000 mclk: 90000 vddc: 875 vddci: 0 pcie gen: 2
    [ 3.015763] power level 2 sclk: 75000 mclk: 90000 vddc: 950 vddci: 0 pcie gen: 2
    [ 3.015765] power level 3 sclk: 90000 mclk: 90000 vddc: 1025 vddci: 0 pcie gen: 2
    [ 3.015767] power level 4 sclk: 97500 mclk: 90000 vddc: 1075 vddci: 0 pcie gen: 2
    [ 3.015768] status:
    [ 3.015769] == power state 2 ==
    [ 3.015771] ui class: battery
    [ 3.015772] internal class: none
    [ 3.015773] caps:
    [ 3.015775] uvd vclk: 0 dclk: 0
    [ 3.015777] power level 0 sclk: 30000 mclk: 30000 vddc: 800 vddci: 0 pcie gen: 2
    [ 3.015778] power level 1 sclk: 40000 mclk: 60000 vddc: 850 vddci: 0 pcie gen: 2
    [ 3.015780] power level 2 sclk: 40000 mclk: 60000 vddc: 850 vddci: 0 pcie gen: 2
    [ 3.015781] status:
    [ 3.023133] switching from power state:
    [ 3.023135] ui class: none
    [ 3.023136] internal class: boot
    [ 3.023138] caps:
    [ 3.023139] uvd vclk: 0 dclk: 0
    [ 3.023141] power level 0 sclk: 30000 mclk: 29900 vddc: 900 vddci: 0 pcie gen: 2
    [ 3.023142] status: c b
    [ 3.023143] switching to power state:
    [ 3.023144] ui class: performance
    [ 3.023145] internal class: none
    [ 3.023147] caps:
    [ 3.023148] uvd vclk: 0 dclk: 0
    [ 3.023149] power level 0 sclk: 30000 mclk: 30000 vddc: 800 vddci: 0 pcie gen: 2
    [ 3.023151] power level 1 sclk: 40000 mclk: 90000 vddc: 875 vddci: 0 pcie gen: 2
    [ 3.023152] power level 2 sclk: 75000 mclk: 90000 vddc: 950 vddci: 0 pcie gen: 2
    [ 3.023154] power level 3 sclk: 90000 mclk: 90000 vddc: 1025 vddci: 0 pcie gen: 2
    [ 3.023155] power level 4 sclk: 97500 mclk: 90000 vddc: 1075 vddci: 0 pcie gen: 2
    [ 3.023156] status: r
    [ 3.024470] [drm] radeon: dpm initialized
    [ 3.024475] radeon 0000:03:00.0: No connectors reported connected with modes
    [ 3.024477] [drm] Cannot find any crtc or sizes - going 1024x768
    [ 3.026968] [drm] fb mappable at 0xA1150000
    [ 3.026970] [drm] vram apper at 0xA0000000
    [ 3.026971] [drm] size 3145728
    [ 3.026972] [drm] fb depth is 24
    [ 3.026973] [drm] pitch is 4096
    [ 3.026976] checking generic (b0000000 410000) vs hw (a0000000 10000000)
    [ 3.027040] radeon 0000:03:00.0: fb1: radeondrmfb frame buffer device
    [ 3.027042] radeon 0000:03:00.0: registered panic notifier
    [ 3.027053] [drm] Initialized radeon 2.34.0 20080528 for 0000:03:00.0 on minor 0
    [ 3.027978] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
    [ 3.028026] ACPI: Lid Switch [LID0]
    [ 3.028063] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2
    [ 3.028066] ACPI: Power Button [PWRB]
    [ 3.028114] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 3.028116] ACPI: Power Button [PWRF]
    [ 3.031882] [drm] Memory usable by graphics device = 2048M
    [ 3.031886] checking generic (b0000000 410000) vs hw (b0000000 10000000)
    [ 3.031888] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
    [ 3.031900] Console: switching to colour dummy device 80x25
    [ 3.031959] i915 0000:00:02.0: setting latency timer to 64
    [ 3.056716] i915 0000:00:02.0: irq 60 for MSI/MSI-X
    [ 3.056723] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 3.056724] [drm] Driver supports precise vblank timestamp query.
    [ 3.056784] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 3.101180] fbcon: inteldrmfb (fb0) is primary device
    [ 4.361087] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 4.707482] Console: switching to colour frame buffer device 170x48
    [ 4.712160] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 4.712553] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 4.713578] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
    [ 4.713584] ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff880159325d98), AE_NOT_FOUND (20130517/psparse-536)
    [ 4.713871] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
    [ 4.713930] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input4
    [ 4.715381] acpi device:55: registered as cooling_device0
    [ 4.715415] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 4.715455] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
    [ 4.715487] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
    [ 4.738967] ACPI: bus type USB registered
    [ 4.738999] usbcore: registered new interface driver usbfs
    [ 4.739016] usbcore: registered new interface driver hub
    [ 4.739050] usbcore: registered new device driver usb
    [ 4.739638] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 4.739642] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 4.739649] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 4.739721] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 4.739741] xhci_hcd 0000:00:14.0: irq 61 for MSI/MSI-X
    [ 4.740145] xHCI xhci_add_endpoint called for root hub
    [ 4.740148] xHCI xhci_check_bandwidth called for root hub
    [ 4.740208] hub 1-0:1.0: USB hub found
    [ 4.740218] hub 1-0:1.0: 9 ports detected
    [ 4.741007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 4.741164] ehci-pci: EHCI PCI platform driver
    [ 4.742756] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 4.742760] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 4.743091] xHCI xhci_add_endpoint called for root hub
    [ 4.743093] xHCI xhci_check_bandwidth called for root hub
    [ 4.743135] hub 2-0:1.0: USB hub found
    [ 4.743141] hub 2-0:1.0: 4 ports detected
    [ 4.743425] SCSI subsystem initialized
    [ 4.745035] ACPI: bus type ATA registered
    [ 4.745122] libata version 3.00 loaded.
    [ 4.747867] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 4.747875] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 4.747880] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 4.747891] ehci-pci 0000:00:1d.0: debug port 2
    [ 4.751784] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 4.751800] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc081c000
    [ 4.760774] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 4.760925] hub 3-0:1.0: USB hub found
    [ 4.760930] hub 3-0:1.0: 2 ports detected
    [ 4.761082] ahci 0000:00:1f.2: version 3.0
    [ 4.761230] ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
    [ 4.774140] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
    [ 4.774146] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
    [ 4.774151] ahci 0000:00:1f.2: setting latency timer to 64
    [ 4.774614] scsi0 : ahci
    [ 4.774722] scsi1 : ahci
    [ 4.774798] scsi2 : ahci
    [ 4.774868] ata1: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b100 irq 62
    [ 4.774871] ata2: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b180 irq 62
    [ 4.774873] ata3: DUMMY
    [ 5.067345] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 5.094002] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.094032] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 5.099568] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5HH, SD12, max UDMA/100
    [ 5.100914] ata2.00: configured for UDMA/100
    [ 5.129572] ata1.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
    [ 5.129577] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 5.191169] hub 3-1:1.0: USB hub found
    [ 5.191237] hub 3-1:1.0: 8 ports detected
    [ 5.255854] ata1.00: configured for UDMA/133
    [ 5.256061] scsi 0:0:0:0: Direct-Access ATA ST500LT012-1DG14 0001 PQ: 0 ANSI: 5
    [ 5.261341] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5HH SD12 PQ: 0 ANSI: 5
    [ 5.263686] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 5.263691] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 5.263724] sd 0:0:0:0: [sda] Write Protect is off
    [ 5.263727] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5.263737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.269320] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 5.269323] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 5.269521] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 5.332482] sda: sda1 sda2
    [ 5.333235] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 5.457253] usb 3-1.7: new high-speed USB device number 3 using ehci-pci
    [ 5.549500] device-mapper: uevent: version 1.0.3
    [ 5.549652] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
    [ 5.554331] bio: create slab <bio-1> at 1
    [ 5.607167] usb 3-1.8: new high-speed USB device number 4 using ehci-pci
    [ 6.510287] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.581705] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 7.582431] systemd[1]: Set hostname to <archins3537>.
    [ 8.087615] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 8.087670] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 8.087682] systemd[1]: Starting Login Prompts.
    [ 8.087692] systemd[1]: Reached target Login Prompts.
    [ 8.087700] systemd[1]: Starting Remote File Systems.
    [ 8.087707] systemd[1]: Reached target Remote File Systems.
    [ 8.087715] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 8.087736] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 8.087743] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 8.087762] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 8.087769] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 8.087789] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 8.087796] systemd[1]: Starting Delayed Shutdown Socket.
    [ 8.087813] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 8.087822] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 8.087851] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 8.087858] systemd[1]: Starting Paths.
    [ 8.087865] systemd[1]: Reached target Paths.
    [ 8.087878] systemd[1]: Starting udev Kernel Socket.
    [ 8.087895] systemd[1]: Listening on udev Kernel Socket.
    [ 8.087904] systemd[1]: Starting udev Control Socket.
    [ 8.087920] systemd[1]: Listening on udev Control Socket.
    [ 8.087944] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 8.088034] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 8.088043] systemd[1]: Starting Encrypted Volumes.
    [ 8.088051] systemd[1]: Reached target Encrypted Volumes.
    [ 8.088059] systemd[1]: Starting Journal Socket.
    [ 8.088098] systemd[1]: Listening on Journal Socket.
    [ 8.094096] systemd[1]: Started Set Up Additional Binary Formats.
    [ 8.146808] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 8.147345] systemd[1]: Starting udev Coldplug all Devices...
    [ 8.147641] systemd[1]: Starting Setup Virtual Console...
    [ 8.156662] systemd[1]: Started Load Kernel Modules.
    [ 8.156702] systemd[1]: Mounted FUSE Control File System.
    [ 8.156719] systemd[1]: Mounting Debug File System...
    [ 8.160118] systemd[1]: Starting Apply Kernel Variables...
    [ 8.160456] systemd[1]: Mounting POSIX Message Queue File System...
    [ 8.160770] systemd[1]: Mounting Configuration File System...
    [ 8.161235] systemd[1]: Starting Journal Service...
    [ 8.161549] systemd[1]: Started Journal Service.
    [ 8.407759] systemd-journald[153]: Vacuuming done, freed 0 bytes
    [ 8.622532] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 8.834003] systemd-udevd[177]: starting version 208
    [ 9.449711] ACPI: Requesting acpi_cpufreq
    [ 9.652388] snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
    [ 9.652512] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
    [ 9.703295] ACPI: AC Adapter [ACAD] (off-line)
    [ 9.734702] wmi: Mapper loaded
    [ 9.767167] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 9.900528] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
    [ 9.914682] ACPI: Battery Slot [BAT1] (battery present)
    [ 9.946497] hda_codec: invalid CONNECT_LIST verb 5[1]:0
    [ 9.946555] hda_codec: invalid CONNECT_LIST verb 6[1]:0
    [ 9.946621] hda_codec: invalid CONNECT_LIST verb 7[1]:0
    [ 9.948456] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
    [ 9.948585] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
    [ 9.948656] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
    [ 9.953096] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
    [ 9.953371] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
    [ 9.953378] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.953384] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
    [ 9.953388] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
    [ 9.953392] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.953394] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20130517/utaddress-251)
    [ 9.953398] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20130517/utaddress-251)
    [ 9.953402] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20130517/utaddress-251)
    [ 9.953406] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.953407] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 9.953792] mei_me 0000:00:16.0: setting latency timer to 64
    [ 9.953838] mei_me 0000:00:16.0: irq 65 for MSI/MSI-X
    [ 9.956390] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 9.956608] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
    [ 9.956615] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 10.231648] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 10.250684] cfg80211: Calling CRDA to update world regulatory domain
    [ 10.307646] input: Dell WMI hotkeys as /devices/virtual/input/input11
    [ 10.310649] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
    [ 10.313166] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
    [ 10.313536] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
    [ 10.313923] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 10.347294] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 10.347309] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 10.347544] r8169 0000:01:00.0: irq 66 for MSI/MSI-X
    [ 10.347727] r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc90022cee000, 74:86:7a:50:ce:f4, XID 04900000 IRQ 66
    [ 10.381911] iTCO_vendor_support: vendor-support=0
    [ 10.393283] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 10.393324] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 10.393578] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 10.400848] systemd-udevd[183]: renamed network interface eth0 to enp1s0
    [ 10.416483] ath: EEPROM regdomain: 0x60
    [ 10.416486] ath: EEPROM indicates we should expect a direct regpair map
    [ 10.416489] ath: Country alpha2 being used: 00
    [ 10.416490] ath: Regpair used: 0x60
    [ 10.614808] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 10.615079] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90035180000, irq=19
    [ 10.643067] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 10.643619] systemd-udevd[189]: renamed network interface wlan0 to wlp2s0
    [ 10.646589] scsi3 : SCSI emulation for RTS5139 USB card reader
    [ 10.646742]

    Cdh wrote:
    You didn't give much information so...
    Blacklisting is now done via /etc/modprobe.d/*.conf files
    For example:
    /etc/modprobe.d/disable-radeon.conf would contain
    install radeon /bin/false
    You can also write "blacklist radeon" instead but that only prevents loading it automatically on itself while booting. You can still modprobe it and if it is a dependency of an automatically loaded module it will still get loaded. With the install ... /bin/false there is no way to load it.
    Also you need to make sure that it is not in the modules array in /etc/mkinitcpio.conf (or that your disable-radeon.conf is in the files array) because the initramfs is its own mini-system that doesn't know about the module configuration otherwise.
    but thats the problem ! i need radeon module to start because vgaswitcheroo needs it ! and then trun it off because 'I' dont need it ! anyway i ll give 'bin/false' method a try !

  • Xorg.conf for a dualhead setup with an ATI/AMD graphic card

    Hello Guys
    first I would mention that I've searched for a solution but I've not found one
    now back to the problem. I would configure my system so that I can work with two displays like Xinerama. But when I use
    $ startx
    then my two monitors have a white screen for a second, then the bigger one goes off (no signal) and the little stay with the white screen. The mouse pointer is not visible and no window manager is used.
    I have a SyncMaster P2250 (22") and a Eizo FlexScan L568 (17")
    my graphic card is an AMD/ATI Redwood (Radeon HD 5670) and the fglrx driver from the catalyst repository
    and finally my xorg.conf
    #Server Layout
    Section "ServerLayout"
    Identifier "Main_Layout"
    Screen 0 "Screen_Samsung" 0 0
    Screen "Screen_Eizo" RightOf "Screen_Samsung"
    EndSection
    #Device Section
    Section "Device"
    Identifier "Device_Samsung"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device_Eizo"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    #Monitor Sections (contains 2 monitors)
    Section "Monitor"
    Identifier "Monitor_Samsung"
    Option "DPMS" "true"
    Option "TargetRefresh" "59.9"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1680x1050"
    EndSection
    Section "Monitor"
    Identifier "Monitor_Eizo"
    Option "DPMS" "true"
    Option "TargetRefresh" "60"
    Option "Position" "1680 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1280x1024"
    EndSection
    #Screen Sections
    Section "Screen"
    Identifier "Screen_Samsung"
    Device "Device_Eizo"
    Monitor "Monitor_Samsung"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1680x1050_59.90"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen_Eizo"
    Device "Device_Eizo"
    Monitor "Monitor_Eizo"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1280x1024_60.00"
    EndSubSection
    EndSection
    I would be very grateful if somebody can help me
    greez Troopa

    Hello Guys
    first I would mention that I've searched for a solution but I've not found one
    now back to the problem. I would configure my system so that I can work with two displays like Xinerama. But when I use
    $ startx
    then my two monitors have a white screen for a second, then the bigger one goes off (no signal) and the little stay with the white screen. The mouse pointer is not visible and no window manager is used.
    I have a SyncMaster P2250 (22") and a Eizo FlexScan L568 (17")
    my graphic card is an AMD/ATI Redwood (Radeon HD 5670) and the fglrx driver from the catalyst repository
    and finally my xorg.conf
    #Server Layout
    Section "ServerLayout"
    Identifier "Main_Layout"
    Screen 0 "Screen_Samsung" 0 0
    Screen "Screen_Eizo" RightOf "Screen_Samsung"
    EndSection
    #Device Section
    Section "Device"
    Identifier "Device_Samsung"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "Device_Eizo"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    #Monitor Sections (contains 2 monitors)
    Section "Monitor"
    Identifier "Monitor_Samsung"
    Option "DPMS" "true"
    Option "TargetRefresh" "59.9"
    Option "Position" "0 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1680x1050"
    EndSection
    Section "Monitor"
    Identifier "Monitor_Eizo"
    Option "DPMS" "true"
    Option "TargetRefresh" "60"
    Option "Position" "1680 0"
    Option "Rotate" "normal"
    Option "Disable" "false"
    Option "PreferredMode" "1280x1024"
    EndSection
    #Screen Sections
    Section "Screen"
    Identifier "Screen_Samsung"
    Device "Device_Eizo"
    Monitor "Monitor_Samsung"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1680x1050_59.90"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen_Eizo"
    Device "Device_Eizo"
    Monitor "Monitor_Eizo"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1280x1024_60.00"
    EndSubSection
    EndSection
    I would be very grateful if somebody can help me
    greez Troopa

  • Problem with recognising radeon 6490M graphics card on Pavilion dv6-6176sa

    So,
    My laptop was having some issues recently with the graphics, it basically wouldn't recognise either the intel or the radeon graphics card. I tried updating all drivers under the sun but nothing worked. In the end I formatted my computer and reinstalled windows, did all necessary updates windows and HP ones. Now my laptop would recognise both the intel and radeon in device manager but my computer was constantly using the intel card, I read up a bit and figured this would be due to an issue with the switchable graphics.
    I did the bios and drivers updates and changed switchable graphics to fixed mode, this seemed to do the trick and my laptop ran like it should be for a few days. This morning I start watching some of my shows and then my screen freezes and it starts making a bunch of noise (similar to what it was doing pre-factory reset). Oh dear, I turn it off, and leave it off for a bit figuring maybe it had overheated. I turn it on again, now device manager wont show the radeon card and AMD catalyst produces a warning message saying that there is no AMD driver compatible with the CCC (well it was just fine yesterday, no updates, program installations or anything run since then)
    I'm now wondering whether there may just be a hardware issue and that it's time to pack in my laptop or if this could still be a driver issue.

    @Piids 
    Download and install the most current AMD graphics softpaq.
    You can get it from the download section of your notebook's web support portal.
    Do not install the Intel graphics driver softpaq seperately. Doing that will remove the switchable graphics feature.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Problem with Gnome3 and/or graphics card Nvidia 8600M GT

    Feb 22 07:40:21 localhost dbus[712]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
    Feb 22 07:50:30 localhost kernel: [ 679.031379] gnome-shell[1277]: segfault at 10 ip 00007f3bbd305c0f sp 00007f3b84ff86d8 error 6 in libnvidia-tls.so.295.20[7f3bbd305000+3000]
    Feb 22 07:50:31 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
    Feb 22 07:50:35 localhost kernel: [ 683.420948] gnome-shell[1300]: segfault at 10 ip 00007f43bc84dc0f sp 00007f43877fd6d8 error 6 in libnvidia-tls.so.295.20[7f43bc84d000+3000]
    Feb 22 07:50:35 localhost gnome-session[888]: WARNING: Application 'gnome-shell.desktop' killed by signal
    Feb 22 07:50:35 localhost gnome-session[888]: WARNING: App 'gnome-shell.desktop' respawning too quickly
    Feb 22 06:52:39 localhost rtkit-daemon[1004]: Successfully made thread 1420 of process 1420 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Feb 22 07:52:39 localhost goa[1441]: goa-daemon version 3.2.1 starting [main.c:112, main()]
    Feb 22 07:58:22 localhost kernel: [ 1150.316794] CE: hpet increased min_delta_ns to 20113 nsec
    Hi,
    Here is my /var/log/messages.log output.
    Since several days my computer repeatedly restarts programs that require at least a bit memory, such as firefox ('segmentation fault'), skype, virtualbox, generaly gnome 3 environment. Sometimes it happens that the system hangs and I can't do nothing, although I can hear that hard disk is working - at that moment only hard reset helps.
    I know that the Dell Inspiron laptops (1720) have problems with Nvidia 8600M GT (the cold solder). Is it like that this time? Or maybe something wrong with the memory, CPU (Core Duo) cache memory?
    I will be happy to add any additional information.
    Regards,
    Lukasz

    Did you update the nividia driver recently?
    there are some threads on this

  • MS6167 - Problems with NVIDIA GeForce FX5600 graphics card

    Hi all,
    tried to install a Nvidia GeForce FX5600 old PC of mine that the kids use, mobo is MS-6167. Could not get this to work. States that it cannot get enough resources (in Windows XP, Device Manager). I have tried to force reasign of IRQ from the BIOS on reboot, and even removed the sound card.
    Could this be a power issue, though I assume the card would just not work or crash.
    Any help apprecaited.
    Thanks,
    Bunnster

    "AMD's 750 Chipset
    Power users looking for next-generation features such as AGP 4X /my marking/ and PC133 SDRAM support are currently out of luck on both AMD's Slot A and Intel's Slot 1 infrastructure, as chipsets that support both features are in the latter stages of sampling among motherboard manufacturers. Before a motherboard can tout such features, the motherboards' chipset must support them. All Athlon motherboards currently available ship with AMD's 750 chipset, which only officially supports PC100 SDRAM and the AGP 2X interface."
    Source: http://www.firingsquad.com/hardware/6167/default.asp
    Ad libris: Meaning, I don't think your Nvidia card can do AGP 2X. Bad news could be you'll have trouble fitting the previous card. Your best bet would be to get a powerful PCI-slot only card.

  • Were there graphics card problems with the 2006 Mac Pros?

    I'm curious about the ATI 2600 graphics card issues occuring with the new Mac Pro's using Leopard...
    Did this just start occuring or were people also having problems with the NVIDIA GeForce 7300GT cards on the 2006 Mac Pro's while running Tiger?
    The reason I'm asking is my Dual 867 has finally given up the ghost and needs to be replaced and I have the opportunity to buy a new 2 Dual-Core 2.66GHZ Mac Pro with Tiger loaded in lieu of the newer, problem ridden models.
    Thanks for your responses.

    the 7300 has had no widespread problems.

  • Replacing Intel hd Graphics card with ATI Radeon Graphics card

    Hi, I am using an hp G62 b51SI notebook with an intel hd graphics card. However, am thinking of changing it or supplementing it with an ATI Radeon Graphics card for increased gamiing performance. Is it possible to do so?
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the service manual for your notebook.
    http://h10032.www1.hp.com/ctg/Manual/c02542102.pdf
    The supported motherboards with HP part numbers can be found in chapter 3.

  • Satellite P100: Why the Nvidia 7900 graphic card is not available in UK?

    Why is the nvidia 7900 gpu not available in the p100 in UK? In mainland Europe & Middle East the 7900gs is available. The 7900 gtx in the states is available.
    Why?

    Hi
    I dont believe that its not possible to buy a P100 with the Nvidia 7900 graphic card in UK. If you cannot purchase it form the notebook dealer in your city so I would say check the notebook online shops.
    I have investigated a little bi and found these P100 units with the nVidia 7900 graphic card.
    Satellite P100-426; P100-194; P100-191; P100-196; P100-215; P100-222
    I have found three different graphic cards which were delivered with the P100:
    NVIDIA GeForce Go 7900; GeForce Go 7600 and Intel 945GM Express
    Anyway, the P100 is a new notebook and possibly you cannot buy it in every shop but in my opinion in several times this unit should be available in the UK with the GeForce Go 7900

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • The GPU-windows are blocked for my graphics card because of unresolved problems with the driver. What shoul I do?

    I use an IMAC version 10.6.8. Memory: 4GB. Video Card: NVIDIA GeForce 7300 GT.

    In most cases the graphics cards in iMacs are Not upgradeable.  They are usually soldered to the logic board.  RAM is considered, along with harddrives, the only component that is upgradeable in an iMac, unlike in PC's.  So basically you would need to sell your unit and purchase an iMac with a more powerful graphics card.
    Hope this helps

Maybe you are looking for

  • Disk repair for external hard drive

    Hi, I gave my son an external hard drive to back up his school work, besides the normal backups of on the Time Capsule. So how he managed to hget the external hard dirve disappear from the screen while there is no back up left on the TC. I have tried

  • Advantages of content server

    Hi Gurus I'm researching using Content server in DMS. Can you give me the advantages of content server in DMS? With my opinion, when you use content server, you can include database and capacity for further problems such as need more storage space, i

  • 170GB programs saved on hard drive? Without installing anything special?

    Apparently I have over 170 GB of programs saved on my hard drive, but I do not use it for anything fancy or did not install anything spectacular. When checking the program size, iMovie is the biggest one with only 2,1 GB. I cannot find the reason why

  • Bad pixel patch correction in 2D image

    In one CCD image (600X800), I have few patches of bad pixels (few are in irregular shapes, few are in regular one like rectangle of 8X8 pixels). For correcting these bad pixel patches, I am looking for some surface fitting function, which should have

  • AVL report Display problem

    Hi, I am changing a stnadard report program. Its displying output as ALV list display. As per stnadard program its having 4 push buttons in the report out. I have to remove those and display the 'Change Layout' button in the output. I have deleted th