Problem with TreeMap and Vector
Hello,
this is the problem I have:
I declare a Vector like this:
Vector<String> theVector = new Vector<String>();
I put the String needed into the Vector:
theVector.add("blabla")
In the other hand I had created a TreeMap like this:
private TreeMap<Integer, Vector<String>> theTreeMap;
I now when I try to put the Key and the Element like this my program crash:
theTreeMap.put(1096,theVector);
I think I don't put the data on the good way in the TreeMap...
Any Idea? Thank you very much
In the other hand I had created a TreeMap like this:
private TreeMap<Integer, Vector<String>> theTreeMap;
I now when I try to put the Key and the Element like
this my program crash:
theTreeMap.put(1096,theVector);What do you mean?
Similar Messages
-
Problems with SwingWorker and classes in my new job, ;), can you help me?
Hi all, ;)
First of all, sorry about my poor English.
I have a problem with Swing and Threads, I hope you help me (because I'm in the firsts two weeks in my new job)
I have two classes:
Form1: Its a JPanel class with JProgressBar and JLabel inside.
FormularioApplet: (the main) Its a JPanel class with a form1 inside.
I have to download a file from a server and show the progress of the download in the JProgressBar. To make it I do this:
In Form1 I make a Thread that update the progress bar and gets the fole from the server.
In FormularioApplet (the main) I call to the method getDownloadedFile from Form1 to get the File.
THE PROBLEM:
The execution of FormularioApplet finishes before the Thread of Form1 (with download the file) download the file. Then, when I call in FormularioApplet the variable with the file an Exception: Exception in thread "AWT-EventQueue-1" java.lang.NullPointerException is generated.
First main begins his execution, then call to Form1 (a thread) then continues his execution and when the execution is finished ends the execution os Form1 and his thread.
How can I do for main class call the function and the Thread download his file after main class assign the file of return method?
How can I pass information froma class include an a main class. Form1 can't send to main (because main class made a Form1 f1 = new Form1()) any information from his end of the execution. I think if Form1 can say to main class that he finishes is job, then main class can gets the file.
I put in bold the important lines.
Note: My level of JAVA, you can see, is not elevated.
THANKS A LOT
Form1 class:
package es.cambrabcn.signer.gui;
import java.awt.HeadlessException;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.MalformedURLException;
import java.net.URL;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
public class Form1 extends javax.swing.JPanel {
//Variables relacionadas con la clase original DownloadProgressBar
private InputStream file;
private int totalCicles;
private int totalFiles;
private int currentProgress;
private SwingWorker worker;
private ByteArrayOutputStream byteArray;
private boolean done;
/** Creates new form prueba */
public Form1() {
initComponents();
this.byteArray = new ByteArrayOutputStream();
progressBar.setStringPainted(true);
//this.totalFiles = totalFiles;
currentProgress = 0;
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
label1 = new javax.swing.JLabel();
progressBar = new javax.swing.JProgressBar();
statusLabel = new javax.swing.JLabel();
setBackground(new java.awt.Color(255, 255, 255));
setMaximumSize(new java.awt.Dimension(300, 150));
setMinimumSize(new java.awt.Dimension(300, 150));
setPreferredSize(new java.awt.Dimension(300, 150));
label1.setFont(new java.awt.Font("Arial", 1, 18));
label1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label1.setText("Barra de progreso");
statusLabel.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
statusLabel.setText("Cargando");
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(this);
this.setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, statusLabel, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, progressBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, label1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(label1)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(progressBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(statusLabel)
.addContainerGap(73, Short.MAX_VALUE))
}// </editor-fold>
// Declaraci�n de variables - no modificar
private javax.swing.JLabel label1;
private javax.swing.JProgressBar progressBar;
private javax.swing.JLabel statusLabel;
// Fin de declaraci�n de variables
public byte[] getDownloadedFile(String documentToSign){
//Variables locales
byte puente[] = null;
try{
//Leemos el documento a firmar
StringTokenizer st = new StringTokenizer(documentToSign, ";");
Vector<URL> fileURL = new Vector<URL>();
HttpSender sender = new HttpSender(null);
//Introducimos la lista de URLs de archivos a bajar en el objeto Vector
for(; st.hasMoreTokens(); fileURL.add(new URL(st.nextToken())));
//Para cada URL descargaremos un archivo
for(int i = 0; i < fileURL.size(); i++) {
file = sender.getMethod((URL)fileURL.get(i));
if(file == null) {
Thread.sleep(1000L);
throw new RuntimeException("Error descarregant el document a signar.");
System.out.println("Form1 Dentro de getDownloadFile, Antes de startDownload()");
//Fijamos el valor del n�mero de ciclos que se har�n seg�n el tama�o del fichero
this.totalCicles = sender.returnCurrentContentLength() / 1024;
this.progressBar.setMaximum(totalCicles);
//Modificamos el texto del JLabel seg�n el n�mero de fichero que estemos descargando
this.statusLabel.setText((new StringBuilder("Descarregant document ")).append(i + 1).append(" de ").append(fileURL.size()).toString());
statusLabel.setAlignmentX(0.5F);
*//Iniciamos la descarga del fichero, este m�todo llama internamente a un Thread*
*this.startDownload();*
*System.out.println("Form1 Dentro de getDownloadFile, Despu�s de startDownload()");*
*//if (pane.showProgressDialog() == -1) {*
*while (!this.isDone()){*
*System.out.println("No est� acabada la descarga");*
*if (this.isDone()){*
*System.out.println("Thread ACABADO --> Enviamos a puente el archivo");*
*puente = this.byteArray.toByteArray();*
*System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);*
*else{*
*Thread.sleep(5000L);*
*// throw new RuntimeException("Proc�s de desc�rrega del document a signar cancel�lat.");*
catch (HeadlessException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("UI: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (MalformedURLException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (HttpSenderException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (InterruptedException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
//System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);
return puente;
public void updateStatus(final int i){
Runnable doSetProgressBarValue = new Runnable() {
public void run() {
progressBar.setValue(i);
SwingUtilities.invokeLater(doSetProgressBarValue);
public void startDownload() {
System.out.println("Form1 Inicio startDownload()");
System.out.println("Form1 Dentro de startDownload, antes de definir la subclase SwingWorker");
System.out.println(done);
worker = new SwingWorker() {
public Object construct() {
System.out.println("Form1 Dentro de startDownload, dentro de construct(), Antes de entrar en doWork()");
return doWork();
public void finished() {
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Antes de asignar done = true");
System.out.println(done);
done = true;
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Despu�s de asignar done = true");
System.out.println(done);
statusLabel.setText("Completado, tama�o del archivo: " + (byteArray.size() / 1024) + "KB");
System.out.println("Form1 Dentro de startDownload, antes de worker.start()");
worker.start();
System.out.println("Form1 Dentro de startDownload, antes de salir de startDownload");
System.out.println(done);
System.out.println("Form1 Dentro de startDownload, despu�s de worker.start()");
* M�todo doWork()
* Este m�todo descarga por partes el archivo que es necesario descargar, adem�s de actualizar
* la barra de carga del proceso de carga de la GUI.
public Object doWork() {
System.out.println("Form1 doWork() this.byteArray.size(): " + this.byteArray.size());
try {
byte buffer[] = new byte[1024];
for(int c = 0; (c = this.file.read(buffer)) > 0;) {
this.currentProgress++;
updateStatus(this.currentProgress);
this.byteArray.write(buffer, 0, c);
this.byteArray.flush();
this.file.close();
this.currentProgress = totalCicles;
updateStatus(this.currentProgress);
} catch(IOException e) {
e.printStackTrace();
System.out.println("Form1 doWork() FINAL this.byteArray.size(): " + this.byteArray.size());
//done = true;
System.out.println("AHORA DONE = TRUE");
return "Done";
public boolean isDone() {
return this.done;
FormularioApplet class (main)
package es.cambrabcn.signer.gui;
import java.awt.Color;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.net.URL;
import java.security.Security;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
import netscape.javascript.JSObject;
import org.bouncycastle.jce.provider.BouncyCastleProvider;
import sun.security.provider.Sun;
import be.cardon.cryptoapi.provider.CryptoAPIProvider;
public class FormularioApplet extends java.applet.Applet {
//Variables globales
int paso = 0;
private static final String JS_ONLOAD = "onLoad";
private static final String JS_ONLOADERROR = "onLoadError";
private static final int SIGNATURE_PDF = 1;
private static final int SIGNATURE_XML = 2;
//private String signButtonValue;
private int signatureType;
private String documentToSign;
private String pdfSignatureField;
private Vector<String> outputFilename;
private Color appletBackground = new Color(255, 255, 255);
private Vector<byte[]> ftbsigned;
* Initializes the applet FormularioApplet
public void init(){
try {
SwingUtilities.invokeLater(new Runnable() {
//SwingUtilities.invokeAndWait(new Runnable() {
//java.awt.EventQueue.invokeAndWait(new Runnable() {
public void run() {
try{
readParameters();
initComponents();
catch(FileNotFoundException e){
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch(IOException e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (Exception e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
javascript(JS_ONLOAD, null);
/** This method is called from within the init() method to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
this.setSize(350, 450);
appletPanel = new javax.swing.JPanel();
jPanel1 = new javax.swing.JPanel();
jTextField1 = new javax.swing.JLabel();
jPanel2 = new javax.swing.JPanel();
label = new javax.swing.JLabel();
jPanel3 = new javax.swing.JPanel();
jButton1 = new javax.swing.JButton();
jButton2 = new javax.swing.JButton();
setLayout(new java.awt.BorderLayout());
appletPanel.setBackground(new java.awt.Color(255, 255, 255));
appletPanel.setMaximumSize(new java.awt.Dimension(350, 430));
appletPanel.setMinimumSize(new java.awt.Dimension(350, 430));
appletPanel.setPreferredSize(new java.awt.Dimension(350, 430));
jPanel1.setBackground(new java.awt.Color(255, 255, 255));
jPanel1.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
jTextField1.setFont(new java.awt.Font("Arial", 1, 18));
jTextField1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
jTextField1.setText("SIGNATURA ELECTRONICA");
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 24, Short.MAX_VALUE)
.addContainerGap())
jPanel2.setBackground(new java.awt.Color(255, 255, 255));
jPanel2.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
label.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label.setIcon(new javax.swing.ImageIcon("C:\\java\\workspaces\\cambrabcn\\firmasElectronicas\\logo.gif"));
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label)
.addContainerGap(229, Short.MAX_VALUE))
jPanel3.setBackground(new java.awt.Color(255, 255, 255));
jPanel3.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
//this.jButton1.setVisible(false);
//this.jButton2.setVisible(false);
jButton1.setText("Seg\u00fcent");
jButton1.setAlignmentX(0.5F);
//Cargamos el primer formulario en el JPanel2
loadFirstForm();
//Modificamos el texto del bot�n y el contador de pasos.
//this.jButton1.setText("Siguiente");
//this.jButton1.setVisible(true);
//this.jButton2.setVisible(true);
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
jButton2.setText("Cancel\u00b7lar");
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton2ActionPerformed(evt);
org.jdesktop.layout.GroupLayout jPanel3Layout = new org.jdesktop.layout.GroupLayout(jPanel3);
jPanel3.setLayout(jPanel3Layout);
jPanel3Layout.setHorizontalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 94, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 112, Short.MAX_VALUE)
.add(jButton2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 102, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
jPanel3Layout.setVerticalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jButton2)
.add(jButton1))
.addContainerGap())
org.jdesktop.layout.GroupLayout appletPanelLayout = new org.jdesktop.layout.GroupLayout(appletPanel);
appletPanel.setLayout(appletPanelLayout);
appletPanelLayout.setHorizontalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel3, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
.addContainerGap())
appletPanelLayout.setVerticalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
add(appletPanel, java.awt.BorderLayout.CENTER);
}// </editor-fold>
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt) {
this.destroy();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
changeForms(this.paso);
// Declaraci�n de variables - no modificar
private javax.swing.JPanel appletPanel;
private javax.swing.JButton jButton1;
private javax.swing.JButton jButton2;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JPanel jPanel3;
private javax.swing.JLabel jTextField1;
private javax.swing.JLabel label;
// Fin de declaraci�n de variables
* M�todo readParameters
* M�todo que inicializa los valores de los par�metros internos, recibidos por par�metro.
private void readParameters() throws FileNotFoundException, IOException {
???????????????? deleted for the forum
addSecurityProviders();
* M�tode loadFirstForm
* Aquest m�tode carrega a jPanel2 el formulari que informa sobre la c�rrega dels arxius
private void loadFirstForm(){
//Form1 f1 = new Form1(stream, i + 1, fileURL.size(), sender.returnCurrentContentLength(), appletBackground);
//Form1 f1 = new Form1(fileURL.size(), sender.returnCurrentContentLength());
Form1 f1 = new Form1();
//Lo dimensionamos y posicionamos
f1.setSize(310, 150);
f1.setLocation(10, 110);
//A�adimos el formulario al JPanel que lo contendr�
this.jPanel2.add(f1);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Descarreguem l'arxiu a signar
*System.out.println("FormularioApplet Dentro de loadFirstForm(), antes de llamar a getDownloadFile()");*
*byte obj[] = f1.getDownloadedFile(this.documentToSign);*
if (obj == null){
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) es NULL");
else{
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) NO es NULL");
System.out.println("obj: " + obj.length);
this.ftbsigned.add(obj);
System.out.println("FormularioApplet Dentro de loadFirstForm(), despu�s de llamar a getDownloadFile()");
//Indicamos que el primer paso ya se ha efectuado
this.paso++;
* M�tode changeForms
* Aquest m�tode carrega a jPanel2 un formulari concret segons el valor de la variable global "paso"
private void changeForms(int paso){
/*A cada paso se cargar� en el JPanel y formulario diferente
* Paso previo: Se realiza en la inicializaci�n, carga el formulario, descarga el archivo y muestra la barra de carga.
* Case 1: Se carga el formulario de selecci�n de tipo de firma.
* Case 2: Se carga el formulario de datos de la persona que firma.
this.paso = paso;
switch(paso){
case 1:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form2 f2 = new Form2();
//Lo dimensionamos y posicionamos
f2.setSize(310, 185);
f2.setLocation(10, 110);
//Quitamos el formulario 1 y a�adimos el formulario 2 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f2);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el contador de pasos.
this.paso++;
break;
case 2:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form3 f3 = new Form3();
//Lo dimensionamos y posicionamos
f3.setSize(310, 175);
f3.setLocation(15, 130);
//Quitamos el formulario 1 y a�adimos el formulario 3 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f3);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el texto del bot�n y el contador de pasos.
this.jButton1.setText("Finalizar");
this.paso++;
break;
default:
//Finalizar el Applet
//C�digo que se encargue de guardar el archivo en el disco duro del usuario
break;
private void addSecurityProviders() throws FileNotFoundException, IOException {
Security.addProvider(new CryptoAPIProvider());
if (signatureType == SIGNATURE_PDF) {
Security.addProvider(new BouncyCastleProvider());
else {
Security.addProvider(new Sun());
private File createOutputFile(String filename, int index) {
return new File((String)outputFilename.get(index));
protected Object javascript(String function, String args[]) throws RuntimeException {
//Remove
if (true) return null;
try {
Vector<String> list = new Vector<String>();
if(args != null) {
for(int i = 0; i < args.length; i++) {
list.addElement(args);
if(list.size() > 0) {
Object objs[] = new Object[list.size()];
list.copyInto(objs);
return JSObject.getWindow(this).call(function, objs);
} catch(UnsatisfiedLinkError e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
} catch(Throwable e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
return JSObject.getWindow(this).call(function, new Object[0]);
Edited by: Kefalegereta on Oct 31, 2007 3:54 AM
Edited by: Kefalegereta on Oct 31, 2007 4:00 AMLook at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Problem with JFrame and busy/wait Cursor
Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread. -
Problem with installing and running some applications or drivers
When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regiszlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro -
Problems with Safari and Firefox (HTTP?)
Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
NanneI'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled -
Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/
Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter -
Problem with DMGs and error: "No Mountable File Systems"
Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaiaWhere you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it
-
Problem with Send and Receive Emal In SAP System
Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PMHi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael -
Problem with Speaker and Headset in Windows Vista
Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,EdwinWhen you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have). -
Problem with trigger and entity in JHeadsart, JBO-25019
Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
I have a problem with trigger and entity in JHeadsart
I have 3 entity and 3 views
DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
TelUoView based on TelUo entity based on TEL_UO database table.
NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
I am using JHS to create :
A JHS table-form based on DsitTelephoneView
A JHS table based on TelUoView
A JHS table based on NewAnnuaireView
LIB_POSTE is a :
DSIT_TELEPHONE column
TEL_UO column
NEW_ANNUAIRE column
NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
Lib_poste is upadated in JHS table based on TelUoView
I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
FOR EACH ROW
BEGIN
UPDATE DSIT_TELEPHONE T
SET t.lib_poste = :new.lib_poste
WHERE t.id_tel = :new.id_tel;
END;
When I change the lib_poste with the application :
- the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
- but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
- in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
It is as if it had lost the bond with the row in the entity.
Could you help me please ?
Regards
LaurentThe following example should help.
SQL> create sequence workorders_seq
2 start with 1
3 increment by 1
4 nocycle
5 nocache;
Sequence created.
SQL> create table workorders(workorder_id number,
2 description varchar2(30),
3 created_date date default sysdate);
Table created.
SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
2 BEFORE INSERT ON workorders
3 FOR EACH ROW
4 BEGIN
5 SELECT workorders_seq.nextval
6 INTO :new.workorder_id
7 FROM dual;
8 END;
9 /
Trigger created.
SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
Session altered.
SQL> insert into workorders(description) values('test1');
1 row created.
SQL> insert into workorders(description) values('test2');
1 row created.
SQL> select * from workorders;
WORKORDER_ID DESCRIPTION CREATED_DATE
1 test1 30-NOV-2004 15:30:34
2 test2 30-NOV-2004 15:30:42
2 rows selected. -
Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/ -
Problem with Rescue and Recovery after installing Norton Internet Security 2010
Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers -
Problem with dreamweaver and Flash
Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie. -
Problem with Preview and PSD files - random gray square
Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas?
Maybe you are looking for
-
Table M_VMVLB does not exist in ECC 5.0
Hi, We found that table M_VMVLB is available in 4.6C system but not available in ECC 5.0. Do yo have ay idea about this? Is there any other table created for this ? Regards, Umesh
-
Insert a record into a table through email in an Oracle APEX application
I developed an Oracle APEX application, there is a table called events. I can insert/update/delete a record in the table through browser. I am thinking in order to quickly do the data entry, user should be able to send an email, then the table should
-
Problem converting Outlook 2007 email to PDF
We have a new problem that recently appeared. Sometimes when we click on the Adobe PDF tab in Outlook 2007 and select "Convert to Adobe PDF", when we go to open the resulting pdf file, we get the following message "Multiple Files are Bound together
-
How to transfer vendor master from MM to SUS?
Hi friends How to transfer vendor master from MM to SUS Are the following steps correct 1.create vendor master in MM 2.use tcode BD14 in MM and enter partner system as SUS ( to send vendor master) 3.use BD15 in SRM to accept the master data from MM.
-
Crap! Did I damage my firewire port?
Previous owner of a PC laptop and 4-pin FW that connected my m-audio fw-410. Needed to use the adapter to power the device. Got my MBP with 6-pin and have been using the fw-410 but still connected to the adapter. I've heard that this is necessary whe