Problem with TV out, only audio, no video

I has just bought a new ipod video 30GB and I also bought a A/V cable
of apple. But when I connect to my television. Only hear audio from
television but no video.
I tried a lot of ways as folows:
+ video setting : changed TV out --> ON
+ I tried restone ipod to factory condition
+ I tried to change the position of 3 connectors (Yellow,Red, Whitle)
of A/V cable (according to standard, Yellow is video connector).
+ I tried some tips from Discussion Techniques from Apple Forum
But I still can't see video, just hear audio from Television.
What's problem?
I think Ipod only send the audio signal, not video signal.
Can you help me to solve this problem?
Thank you very much.

As well I had the same problem with my i-pod and the one of my wife. The solution was simple:
config: i-pod 60Gb; i-pod 30Gb
cable: no name audio/video A/V cable
TV-out: select ask (not on!!!)
cable into TV: white on white
yellow on red
red on yellow
There are no problems with bad video quality if volume is high, just working fine
What may be the problem: I think, the automatic detect (if you put your setting for TV-out on your i-pod to on) is not working. As well as using only headphones there must be an electronic cirquit detection; means with no Apple stuff just not working. As well there are the yellow and red cable changed; means white and yellow have audio; red video.
Working so for video and diashow on my pod each time I´ve to select TV-Out manually starting video or Dia Show. In that moment both applications are starting in small windows, not in Full Screen mode on the pod.
The order to connect TV or i-pod doesn´t matter; it´s just the manual setting the i-pod for TV-out.
I hope, the info can help you.
i-pod 60Gb Windows XP Pro

Similar Messages

Problems with a Published PDF audio/video that runs out of synch

Hi,
I have a large (30minute) video, with a combination of audio, flash videos with and without embedded music, and screens.
I published the captivate project to PDF, and then ran it using Abode Reader X and Flashplayer 11.01.
It played fine.
However, I am getting feedback from various people that when they try and run the video, the initial embedded flv file (with music) starts off and then suddenly the entire PDF file goes wild displaying screens in 1 second intervals in no apparent pattern with the music from the embedded flv file still playing in the background, eventually the voice over starts but obviously out of synch as the slides still appear in these 1 second intervals.
I ran a few tests to see if this strange behaviour had anything to do with the Adobe Reader or Flash Player installed, but there seems to be no pattern.
I even upgraded one system to Adobe Reader X and Flashplayer 11 but still experienced this same problem.
Does anyone have any suggestions as to why this might be happening for some users and not for all? Or what other settings I might try looking at to solve the problem?
Thank you,
Tannis

We will need a lot more information about those Videos. This ARTICLE will give you ideas on the info that will be so very useful for us to help you.
This ARTICLE will give you some background on Video formats/CODEC's.
Good luck, and please let us know more about those files. A screen-cap of G-Spot would be very useful.
Hunt

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

Problems with TV Out signal after upgrading to iOS 5.1

Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1? I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/back screen. Prior to upgrading, I had no connection problems and could view TV Shows, Movies, Music Videos, Keynote, etc...without problems. I've been unable to find any resolution to this problem, even followed Apple guidance to detach and reattach the HDMI adapter without success. Seems like a software bug to me and it's a major problem when trying to conduct business or personal activities. Hopeing Apple has a fix in work already...anyone else have any ideas? Thx in advance...

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
If that does not work, restore the iPad to the factory settings.

Problem with fading out particles in cs5

I have a problem with fading out particles or anything for that matter in my CS5 after effects! I set up the key frames right. O opacity at first and whatever number at next and it fades in fine, But when I try to do the reverse it will not fade out and only stops the effect if I cut its durration at the red par representing it on the top of the time line. This produces and rough aburpt cut of the effect which will not due. Please can anyone tell me what I am doing wrong that I can't fade out particles with opacity?

First question: What OS and what's the build of CS5.5?
Second question: What effect are you using? There are a bunch of ways to generate particles.
Last question: if you turn off the effect can you get the layer to fade out? Pressing Alt/Option + t will set a keyframe for opacity on your layer and reveal the keyframe in the time line. Do that, set the value to 0, then move down the timeline a few frames and set the value to 100. This should generate another keyframe. Now move down a few more frames and press Alt/Option + t or change the value for opacity to anything and then back to 100, or copy the previous keyframe and paste to set a 3rd keyframe. Finally move down a few more frames and set the value to 0. You should have 4 keyframes in your tlimeline for opacity. If you want to clean up the layer press Alt/Option + ] to set the out point for the layer.
Everything should work just fine. Turn on the effect and your layer and the effect should fade out.
If you want to do something else with the particles, like fade out a particle over the lifetime of the particle we'll need to know which plug-in you're using.

How to capture only audio from video on iMovie 11?

Iam working with imovie. I need only audio from video. Could some body help me please?

>>> click >>>
http://help.apple.com/imovie/index.html#mov3b0fa051

Windows 8.1 Pro 64 bits. Problem with IDT High Definition Audio Driver on my HP pavilion g6 notebook

Hi!
I'd recently upgraded from Windows 7 to Windows 8.1 Pro 64-bit version. All drivers worked fine but I'm having problems with IDT High Definition Audio driver. Can someone help me? Thanks in advance! My PC model is: LS278EA#ABE

Hi:
See if this driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...

Hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

Problems with filling out PDF forms

We have problems with filling out PDF-forms. Aotomatic filling of forms is deactivated and we use the Adobe Reader 11.0.05. The problem is: After some time the inputs are wrong put down in the form. For example: I write 120 and in the form stands 125. We have already extinguished the cache. Thanks for your help in advance.

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

Has anybody had a problem with greyed out wifi on i phone 4 gs

Has anybody had a problem with greyed out wifi setting on iphone 4gs

Forty four in the last week.
wifi greyed out

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me

I'm using firefox 6.0.2 It's making problem with Bangla font ONLY on FACEBOOK others bangli website FORNT SIZE are OK. On the FACEBOOK it shows Bangla font in a very / Too small! I change font SIZE in firefox setting but i can't solve. Pls HELP me ..

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Elements 9.03 with Windows XP - Only Audio Portion of Video Files Playing Back

I'm using Elements 9.03 with Windows XP. When I download videos from my Sony HandyCam, the video portion of the file does not play back, only audio. Is there a setting I can adjust or do I need to use a more recent version of Windows?

The video format may not be supported e.g. if AVCHD
If you ever consider upgrading your computer and software, you will get maximum benefit from the combo. Photoshop Elements + Premiere Elements. As well as being the best value for money, it supports all the modern formats and allows the burning of HD DVD’s and many other options, not possible in PSE alone.

Problems with fade outs - audio

Hi
I have a problem that's driving me crazy. Whenever I add a fade out transition at the end of a clip, a random piece of audio from earlier in the clip appears at full volume alongside the fade. Is this a bug and does anyone know a way round it? iMovie 5 never used to do this.
Any help greatly appreciated.
Thanks
Ian

I had a similar issue just on the weekend. But, it wan't just the "fade out transition". Other transitions were affected by this same "bug".
I decided to fade out the audio first before applying the "fade out transition". This is not the solution which I wanted personally, but it did the trick. No random piece of audio.
I do agree that a real solution to the issue would be excellent! Hopefully, tech support at Apple will have something for afrocelt1121.
Good Luck!
Rodger

Lenovo B520 sends only audio, not video to tv

Hello. I want to play what's on my B520 on my TV. However, only audio is sent out but no video and whatever desktop image (desktop background image, not programs or anything else). I can hear the audio from my computer on the TV. I can also see whatever image I have set as my desktop image (behind all the icons). But I can't even see my desktop icons and if I'm playing some video or something my TV plays the sound portion but just shows my desktop background image with no video being sent other than that. Can somebody please tell me what I'm doing wrong? I have a JVC TV but it's showing the desktop image so something is being sent from B520 so I don't think the problem is with the TV. Please help.
Solved!
Go to Solution.

it sound like you have extended your desktop not cloned it press and hold windows key then tap P to cycle through the options, duplicate or second screen is the option you are after
Thx dave
yoga 2, lenovo b540
3 custom gaming pc systems

Problem with TV out, only audio, no video

Similar Messages

Maybe you are looking for