Problem with unlocked C902

I recently changed from an orange network C902. The phone was unlocked and I inserted a Virgin sim card. Although the now displays the virgin name and I can make and receive calls and texts. When I go on the mobile web it constantly goes to the orange internet site. Even though the settings for orange web have been removed. Any advice?

http://www.sonyericsson.com/cws/support/phones/topic/updateserviceapplication/c902?cc=gb&lc=en You can find all the info you need and download the application from this link.Let me know if you get stuck.

Similar Messages

  • Problem with unlocked iPhone

    MY iphone is unlocked in uk and accepts all sim cards in uk but when i travel to colombia and insert local sim it asks to activate the phone and then says please insert the original sim the phone came with why is this when my phone is unlocked ?

    i got my phone on the vodafone network in uk, also they are the ones who unlocked my iphone 5 for me by contacting apple and my phone was unlocked, at the time i checked 4 different uk sim cards in my phone and were all working fine, then i had problem with my iphone kept crashing so took it in to a apple store in uk and the exchanged my iphone for me.
    when phone had been exchanged in apple store they gave me unlocked phone, how i know this my carrier is vodafone uk, and i have used my uk t-mobile sim card in there and was working fine, and currently using giffgaff uk sim card which runs on the uk o2 network telefonica. works perfectly fine.
    it is now that i am in colombia and inserted sim card from clara previously known as comcel colombia,
    and it said - ACTIVATION REQUIRED - when it states that i can see full signal bars for reception and also see the 3G sign.
    then states either choose wifi signal or use mobile connection.
    i can choose either and have choosen boh options an it states
    only compataible sim cards from a supported carrier maybe used to activate iphone. please insert the sim card that came with your iphone
    so strange when i can use all uk sim cards in my phone and has been tested by me myself

  • HT5047 Problem with unlock my iPhone 5

    hello, I have a problem with my iPhone 5 becouse have simlock on sprint carrier and I dont know how unlock it. I have information, sprint unlocking their smartfon for 3 month use.

    You contact the wireless carrier to unlock the device.  No one else can help you.  Only the carrier.

  • Problem with unlock button

    I habe purchased blackberry 9320 just a month back (13th May 2013). I am facing a problem wit unlock button. It seems it is by default in depressed state. Currently it is working but can go down any time. I have visited service center and they asked me to deposit the phone for at least 8 days to get it repaired. This is completely unacceptable for a month old phone!!!

    Hi and Welcome to the Community!
    As a user-to-user community, no one here can answer your question with any level of authority whatsoever. BlackBerry provides zero front line support to end users, including warranty...all support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into BlackBerry at no charge to the end user.
    So, your escalation path is not here, in these forums. Rather, it is through your service center...even if you do not agree with what they have told you. You have no free path by which to bypass them. Your warranty service terms should be governed by your original purchase contract -- if that indeed said that you must leave it with them for 8 days, then that is what you agreed to when you made your purchase (regardless if you feel it acceptable or not now, you nevertheless previously contractually agreed to it).
    There is something called incident support, but it costs to just ask the initial question, since you are bypassing the contract you signed upon purchase. If you wish to investigate that, you can review it here:
    http://us.blackberry.com/support/programs/technical/incident.html
    There also might be some good reading here:
    http://us.blackberry.com/legal/handheld-limited-warranty.html
    But, all in all, from your description, I might not hold out much hope...after all, what you describe does sound like a hardware issue. And just being one month old is not really relevant -- defect can certainly exist, and actually is normally discovered earlier than later. So, from what you describe, it sounds like a manufacturing defect, which should be covered by your warranty (but you may, contractually, have to wait those 8 days if indeed that's what the contract you agreed to states).
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problems with Unlocking

    My iphone is running 4.0.1 firmware and I'm having a problem with the locking feature, which has never happened before.
    When I press the lock button at the top of the phone, It locks like its supposed to but then around 10-15 seconds later the screen flashes up and show the slide to unlock screen. if I leave it for a while( around 20 seconds) it locks back again. but then the problem repeats it self over and over again.
    Its seriously killing the battery life.
    I've tried turning the phone on and off, resetting the settings and even did a factory restore but it still keeps happening.
    I'd really appreciate some help~
    Thanks

    Check www.horizonwirelessonline.com site. 
    There are some other sites that provide the same service.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • HT4993 Problem with unlock my Phone 5

    hello, I have a problem with my iPhone 5 becouse have simlock on sprint carrier and I dont know how unlock it. I have information, sprint unlocking their smartfon for 3 month use.

    Don't post the same question twice.  Your question has already been answered in your other thread.

  • Problem with unlocking and locking the Materials in MARA using idocs.

    We are sending a inbound idoc from one cluster to the other to update the materials
    If the material is locked ( MARA-MATFI=x ) before it needs to be unlock it  ,update it and lock again .
    If its not locked ,we just need to update it and lock the material .
    When we are trying to implement this the materials are not getting locked at all times .
    the update inbound idoc is being sent to 5 clusters at a time .
    The same material is getting locked in some clusters and some it is not . (But the data is being updated in all the clusters )
    Can you please suggest me a solution or give me an idea where the problem would be lying.

    The client has a Keystone Server where alll the Master data is kept and there are 5 Production Servers .
    When ever there are any updates to the Materials they are first updated in the Keystone server .
    And with the help of a Batch Job they send inbound idocs to the 5 Production Servers.
    On the Production servers if the material in MARA  that needs to be updated is locked ,it needs to be unlocked updated and locked again .
    Hope i have  given u the clear idea of the scenario

  • Problem with Unlocked 6131

    hi all,
    i unlocked the secure-element of 6131phone and in the previous months i am using this phone for installing, deleting and accessing the cardlets inside the phone. But accidentally i tried several times through a java program to access the secure-element with WRONG AUTHENTICATION KEYS. (this happened because i keep the phone near the reader while my program is in an infinite loop.. OOOPS!!!! ) now i am not able to authenticate my host with secure-element. it always return 69 82 code. ie, "Security status not satisfied" state. I think my phone's secure-element went in to TERMINATED state as it is mentioned in the Unlock-midlet readme from nokia.
    i have the following questions,
    1. is there any way to get back my phone to previous state?
    2. another unlocking (with nokia unlock-midlet) will help or create any problem?
    Thanking you,
    Sunil

    Thank you lexdabear.
    As you mentioned,
    lexdabear wrote:
    After 10 consecutive failed authentication tries JCOP disables the use of the secure channel permanently. Unfortunately the secure element is now useless.1. Is this means EXACT 10 consecutive failed authentication tries disables secure-element ?
    2. What happens if i am performing an successful authentication after 8 ( let me assume it as 8) consecutive failed authentication tries ?
    3. Will this successful authentication, clears the failed authentication counter or this counter stays at 8 ?
    Thanking you,
    Sunil

  • Problem with unlock the Q10 - incorrect password

    Hello,
    When type the password to unlock the BB Q10 got the following message:
    you have entered  an incorrect password 5 times. After 10 unsuccessfull attempts  your device data will be erased.
    with press OK return to the form to type the password, where on the top of the banner have incorrect password 6/10.
    when type the password can see that the letters and numbers are correct, however the phone does't except them.
    Looks that the device is stacked.
    Is there a  way to unlock in a diffrent way using default password by typing in the password field?
    any suggestion to overcome the problem.
    Thank you! 

    solved the problem by typing in the password field: blackberry follow by the user password.

  • Problem with Unlock

    Hello. I have a problem, that i have iPhone 4, which is locked with the operotar AT&T, because of the fact that it was bought by my parents during their journey to USA without contract, i can't unlocked it. What can i do? I really want to unlock it, now i can't use it as a phone.

    Read: http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820

  • Problems with unlocking Z2 bootloader

    I got "FAILED (remote: Command did not succeed)" messgae - everyhting done with http://developer.sonymobile.com/ everything checked twice.
    What can cause this problem? (device can have unlocked bootloader)

    Hello,
     I have exactly the same problem. I want to unlock the boot loader because I want to install a custom ROM.
    I want to install a custom ROM because Google Play doesn't work (it gives me error conection time out) and I did everything it
    was possible : repaired my phone via Bridge for mac and repaired my phone via Sony windows program (I have both mac and PC with win 7 ultimate 64x). I have the latest ADB installed (full pack). I even tried with flashtool for xperia devices but I get the same ... "command didn't succeed".
    I want to unlock my allowed for unlocking the bootloader Z2 device. Please PLEASE give me some suggestions///.....

  • Problems with unlocked blackberry

    curve 3g 9300
    v5.0.0.846
            i recently unlocked my phone from rogers to fido, for the first 2 days everything worked fine but it still said rogers network. when i turned the phone on n off again it reset to the fido network but i am unable to view youtube videos (Says : An error has occurred attempting to play media.). i cannot use any of the apps using wifi even tho they worked before the reboot. and i cannot seem to set up my email account.
           i changed the apn to internet.fido.ca using fido as password n username, i went to the fido store, rodgers store n called both there technical support with no help.
             How can i fix this problem, ive searched many different forums but nothing seems to work

    You left out one key thing... with Fido, have you registered your BlackBerry PIN on your Blackberry Internet Service account?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem with unlock sap system during upgrade

    Hello All,
    I am performing EHP3 upgrade in CRM system. During Execution phase I har a error to solve. I did tried to unlock sap system with:
    tp unlocksys DJ1 pf:/usr/sap/trans/bin/TP_DOMAIN_DJ1.PFL
    Is it the right command in Windows?
    Thanks

    Dear,
    I faced same issue and resolve it via below steps.
    TP_ Return code: 0208 Error text: error in transport profile (parameter missing)
    RZ10 --> Instance Profile --> Change Mode
    DIR_TRANS=\usr\sap\trans\SUM\SUM\abap
    DIR_PUT=\usr\sap\trans\SUM\SUM\abap
    changed the Value
    DIR_TRANS=\\HostName\sapmnt\trans
    DIR_PUT=\\HostName\sapmnt\trans
    Restart the SAP via sapmmc
    Now APPLY the Pending SAP Note
    again change the value of DIR_TRANS & DIR_PUT via RZ10 and Restart the sapmmc
    tp locksys SID pf=\usr\sap\trans\bin\TP_DOMAIN_SID.PFL
    tp lock_eu SID pf=\usr\sap\trans\bin\TP_DOMAIN_SID.PFL
    ReTry....
    Regards,

  • Problems with unlocking 8320 - urgent

    Hi,
    I am leaving to South America in a couple of days and I have to unlock my Blackberry 8320 in order to use a local simcard.
    So I have just spent 20 quid on an unlock code on a website called: mrunlock.com. Everything seemed to be fine, the code has been delivered quite fast, I entered the code exactly how the instruction told me to, I got the message the code has been accepted, and still all the simcards I've tried are being rejected!
    They sent me 4 codes, 2 of them consist of 6 digits, the other two of 16 digits. So in the Simcard options, while holding ALT, I typed in MEPE, and then just entered the first code, the one that had 6 digits. Now it is impossible to enter any of the other codes again. It's as if the phone has been unlocked; but simcards don't work.
    Does anybody here know if I have to set up anything in order for the Simcards to work? Does anybody know what the problem is??
    I would very much appreciate any help
    Joanna

    Check www.horizonwirelessonline.com site. 
    There are some other sites that provide the same service.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Activation problems with unlocked iphone 5

    Hi all I unlocked an iphone 5 and I used an at&t SIM to activate the phone but then when I put my tmobile SIM in it says I have to activate again. When I remove my SIM the message goes away. Ideas???

    I have unlocked and used iphone 5's before. Never had this problem.
    When I put my tmobile SIM in it;ll say no service then go back to the actviation screen after saying "activation required"

Maybe you are looking for

  • Having a strange issue with Logic, don't know what to do.

    Aright, so I'm having a really weird problem with Logic. It all started about 20 minutes ago. I'm working with 12 midi tracks; all logic instruments. Every first Snare midi note plays extra soft and then every midi note after that plays at its correc

  • Add new column in ME51 display

    Dear experts, We have a requirement from user that in ME51N while adding in detail section that once we enter Plant, Storage Location and material,that there should be two additional column in the same screen where we can directly trigger display of

  • How to call labview DLL from visual C++?

    Hi, I'm trying to call a LV DLL from a VC++ application by using the LoadLibrary and GetProcAddress functions. The DLL contains a simple sum function. The Library is loaded correctly, but the result is always 0.0000. I have loaded a VC++ DLL in a sim

  • Third Party plug-in failure

    Hello, I'm not sure if I'm asking this question in the correct catagory, the site's a little difficult to manuver around so I apologize beforehand if this is the wrong section. Onto my issue, I attempted to install an older plug-in that was compatibl

  • Dynamic WebDynPro Component

    Dear all, I want to know how the parameters are passed to the addChild method while creating dynamic views. Manoj kumar