Problem with USB speakers and new Mac Mini

I have a USB sound system consisting of a pair of Harman Kardon soundsticks and a woofer from probably 10 years ago (bought and used originally with a Mac). I have tried driving it my new Mac Mini. It works fine for about a minute; then the music stops. Here's what I've tried to diagnose the problem:
1. The problem does not occur when these speakers are driven from my Macbook Air (about 3 years old).
2. The OS and iTunes software is up to date on both machines (10.9.5 and 12.0.1.26).
3. It does not depend on which USB port I use on the Mac Mini.
4. Using a port on a USB extender on the Mac Mini does not solve the problem.
5. The iTunes Preference settings are the same on both machines.

Sorry, no actual experience with USB Audio devices.
I found this in the Pro forum, but the outlook doesn't seem good:
http://discussions.apple.com/thread.jspa?messageID=1739084&#1739084

Similar Messages

Is there a problem with USB speakers and Final Cut Express HD?

I have audio only through my internal speaker for Final Cut - however all other sounds play through my USB Harman Kardon speakers fine.
I have tried sending the audio out to my M-Audio head too - and that has been fruitless.
I am really frustrated - I reinstalled the OS. And ran it with only Final Cut and the OS and still have the same issues. Even if I drag an MP3 into Final Cut it plays through the internal speaker. I also notice that the audio really lags behind the video when it plays through the internal speaker - if that means anything. I have made sure that the Canvas Setting is correct.
Tech support for the most part has been nice, but they are unable to help me.
Please help!!!! And thanks in advance.

Sorry, no actual experience with USB Audio devices.
I found this in the Pro forum, but the outlook doesn't seem good:
http://discussions.apple.com/thread.jspa?messageID=1739084&#1739084

Problems with system sleep on new Mac Mini

Hi,
I recently upgraded to the latest Mac Mini & have a problem where the Mac goes to sleep whenever I switch off the display. This is a problem as I have file conversions and a Mozy backup running that I want to run while the screen is off.
I've set the Energy Saver settings to "Never" on both sliders, and I have tried the "MacPilot", "Jiggler" and "Caffine" apps, but none of them prevent the system sleep.
Does anybody have a way to prevent system sleep when the screen has been switched off?
Thanks,
Andy

are you using an apple display?
you could just sleep the display. goto system preferences desktop and screen saver. then click on screen saver. then to hot corners and configure a hot corner to sleep the display.
Then just mouse to that corner and the display instantly sleeps.
Some sleep issues can be fixed by resetting the SMC
Intel-based iMac, Intel-based Mac mini: How to reset the System Management Controller

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

Problems with Halo Combat Evolved on mac mini server with HD3000 graphics

There is frequent flickering of certain elements in the game (ie. background) and certain elements such as weapons are not rendered at all. This happens sporatically and not in a predictable manner. Does any body have any idea what is going on? I read that there are some issues with the HD3000 card on mac minis. I hope I did not make a purchase that I will regret.

If I understand your question correctly, is there a reason you've replaced the integrated MySQL within Mac OS X Server with a second MySQL database implementation? (That's almost inherently going to get tangled; you'll need to shut off the default implementation.)
Or is this a Perl module you've loaded and that is now tipping over? If you haven't replaced MySQL here, then have you started MySQL and run some tests with the database itself? This to make sure MySQL is operational, and that the problem you're working on is in the Perl pieces and not in the MySQL layer?

Upgrade to OS 10.4 with SW coming from new Mac Mini (Intel duo core)

Is it possible to upgrade my G4 PowerBook to the latest OS 10.4 and iLife06 with the SW provided and installed on new Mac Mini's with the Intel duo core? That would make purchasing a new Mac Mini a sweeter deal.

No.
The disks that come with new machines are specific to that machine.
You will need Tiger and iLife '06 if you want to upgrade your PowerBook.
Regards,
Colin R.

[K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

Hello everyone!
I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
Can you tell me what's wrong?
Thanks, bartull@
PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

I think that the problem may have been caused by flashing either with liveupdate or with winflash. I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash. My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
DOS floppy flash shall be performed with :
awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
(Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
After flash is complete :
TURN OFF PSU (don't restart) wait 15 seconds
Turn on again , press the power button .
Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
If that works, then reflash to the bios you tried before with the same procedure. Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
Good luck.

Problems playing dvds on my new mac mini

I'm trying to play a dvd on my new mac mini & whenever I hit the play button I get error: -70025. I've checked the disc for scratches etc... but all seems fine there. Does anyone know what that error is about or have any suggestions as to what I might be doing wrong?

All i can think of is running a cleaning disk in your Mini's drive. I'd be surprised if the mini needed cleaning since it's so new but you never know. Another question that comes to mind is if that particular DVD has some copy protection that prevents it from being played in computers. Some music CDs have that type of protection.

Problems With USB 3.0 On mac?

I have the new Macbook Pro with Retina Display and today i decided to buy a USB 3.0 memory stick. odd enough the read and write speeds are WAY off.Anyone else having this problem? Thanks

Yeah I have tested it with spinning media and it was 30-50% slower than the belkin via thunderbolt.
I am not game enough to try SSD.
And the reliability issues are driving mew crazy, I ordered anotehr belkin thunderbolt hub, and I am now just leaving it to very poor USB chips.
According to this article the design is very poor,
http://www.anandtech.com/show/7603/mac-pro-review-late-2013/8
"Here we really get to see how much of a mess Intel’s workstation chipset lineup is: the C600/X79 PCH doesn’t natively support USB 3.0. That’s right, it’s nearly 2014 and Intel is shipping a flagship platform without USB 3.0 support. The 8th PCIe lane off of the PCH is used by a Fresco Logic USB 3.0 controller. I believe it’s the FL1100, which is a PCIe 2.0 to 4-port USB 3.0 controller. A single PCIe 2.0 lane offers a maximum of 500MB/s of bandwidth in either direction (1GB/s aggregate), which is enough for the real world max transfer rates over USB 3.0. Do keep this limitation in mind if you’re thinking about populating all four USB 3.0 ports with high-speed storage with the intent of building a low-cost Thunderbolt alternative. You’ll be bound by the performance of a single PCIe 2.0 lane."

Powerbook and new Mac Mini compatibility

I'm considering purchasing a new intel-powered mac mini with airport express to use as a house server.
In addition, as I can't afford to replace my G4 powerbook just yet, I was hoping that I might be able to use the Macmini as an short-term alternative for intel-enabled software.
So, my question. Could I network my G4 powerbook and new macmini in such a way that I could run intel-enabled software on the mini, via my powerbook screen and keyboard. Effectively using my powerbook as a dumb terminal for the macmini.
Is that possible given the chipsets?

MacEnstein. Welcome to discussions!
Best to start a new question - many people will stop looking here since it is marked answered. This lets you get the attention you deserve and keeps one problem per thread.
But - we are here - so let's see what happend.
Bonjour will find computers on the same network. That means unless you have gone to pains to set up two DHCP servers and change things substantially - things will work on most home networks.
Open the terminal application on both computers and do a netstat -nr - each should have the same gatway for the default destination and same network destination (look for 192.168.1/24 or similar) under the Gateway column where it says link#4
Most likely you will have IP addresses like 192.168.1.1 and 192.168.1/24 - feel free to start a new thread or post your netstat -nr results of it's not clear what I'm doing.
Also - you can simply test this out from the command prompt. Each machine is known by a host name - type hostname -s on each. If Bonjour is going to work - machine "a" should be able to ping machine "b" as follows:
ping b.local
the .local says use Bonjour to find the machine named b and ping it.

Problems with USB port and song transferring;

Hi! I just got an iPod and I am having problems with it. My computer doesn't have a Hi-Speed USB port, even if it's 9 months old. Some of my friends don't have it either but they still are able to transfer songs onto their iPod. For mine, it keeps saying "Do Not Disconnect." I waited for 5 hours last time I got it and it still isn't working.
I also updated my iPod software today and the iPod icon isn't appearing on the bar to the left in iTunes. I'd really appreciate any help on this! As well as if I really need to do something about the ports or if it could function like this normally.

Quote from: Svet on 08-December-10, 00:48:07
Install chipset drivers from MSI web:
http://eu.msi.com/index.php?func=driverfile&dno=2427&i=0
+
NEC USB 3.0 Drivers:
http://eu.msi.com/index.php?func=driverfile&dno=11189&i=0
are these the same driver provided with the disc driver? as i already installed both of these..

Airport Extreme - problem with usb printer and usb disk

I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
1)
My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
- printer seems working fine after installing bonjour printer installing wizard.
- I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
- In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
- printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
2)
USB disk is Targa Databox II 250
- Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
- I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

No internet, "PPPoE Server Not Found" message. Same problem with both old and new modems.

Help please!
My internet connection with my old Westell 6100 modem was working fine, then quit all of the sudden and would not restart. The DSL and Data lights on the Westell modem were both green. The Internet light alternated between red and off.
I tried every troubleshooting thing I could think of:
Powering down and re-starting the modem and computer.
Resetting the modem.
Checking all of the wire and jack connections.
I plugged my computer ethernet cable straight into the modem, bypassing my router.
I tried both Windows and Mac computers.
I plugged the modem directly into the network interface on the outside of my house to bypass all of my house wiring.
I checked all my phone jacks with a telephone tester to make sure both phone lines were working and not reverse-wired.
I made sure I did not have a DSL filter installed on the modem line.
Verizon Tech Support did a line test and told me the line was fine but that there might be a problem with either my modem or something at the "central office" (not sure what that means). Verizon also sent me a new router as well -- a D-Link DSL-2750B.
The new D-Link router also does not connect to the internet (same problem). The DSL, Data, and Internet lights are all green on the D-Link. I have the computer directly connected to the modem with a new ethernet cable. I repeated the above troubleshooting steps. I went into the router configuration 192.168.1.1 and ran the modem's "Internet Troubleshooting" tests.
There were two error messages on the router configuration screens:
1."PPPoE Server not found" error message is shown on the summary screen.
2."No internet infrastructure present. Please call your infrastructure provider." is shown in the "internet troubleshooting" test results.
Verizon had me change some settings inside the router configuration -- no dice. Verizon ran another line test. A "Level 2 Tech" took over the call and told me that he thinks that the cause of the problem is that the outside wiring coming to my house is reverse-wired. How can this be true since my DSL worked for 2 years before this, my phone line tester indicates my phone lines are wired the right way, and my router reports "PPPoE Server Not Found?"
Verizon is sending out a repair tech to check the outside wiring but I don't think that is the problem at all.
HELP!
Solved!
Go to Solution.

If you're getting DSL sync (solid DSL light), this sounds like a case of a bad line card to me. I've seen it happen before where it wasn't an account or route issue to the network.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Ichat video hosting and new mac mini

I understand that one cannot host a 3 way video chat with a G4 machine,which I have.
Can one host the 3 way video chat with a new Intel Mac mini?
And does it matter that the other 2 participants would be using G4 machines?
Regards
J

Nobody has answered the question which was whether multi chat would work with the new Intel Mac Minis.
I have one on order so I guess I will be able to give you the definitive answer in a couple of days however I would expect that both the single and dual core Intel minis will have the horsepower to run Multi Chats.
Powerboost is a great workaround for G4 Macs and I can confirm that a G4 1Gig Powerbook is more than capable of running a 3 way multichat with this program installed.

Problem with USB speakers and new Mac Mini

Similar Messages

Maybe you are looking for