Problem with Variable screen in WAD
Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
Abraham
Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André
Similar Messages
-
Problem with variable refresh in WAD
Hi Experts,
I have a query in which currency and cal quarter are the variables. The cal quarter is populated using a customer exit to have the current quarter. I have built a webtemplate on this query. Now the problem is:When I run the webtemplate and try to change the currency value (for example EUR to CAD) and select show all values for the cal quarter, i see that the cal quarter is being reset to the default value i.e (current quarter). When i pass a value (say 2.2008) to the cal quarter in the variable screen or in the characteristic restictions in the webtemplate and try to change the currency in the currency drop down, the cal quarter remains same (2.2008) and the keyfigures are displayed with the selected currency.
Could you provide some inputs so that the cal quarter value is not reset upon selection of "show all values" in the variable screen/drop down and change in currency.
P.S. No changes at query level are allowed and both query and webtemplate are in 7.0
Regards,
Naveen.HI Naveen,
WHere is the customerr Exit of the calquarter used in teh Query. is it in the Filter section or in teh Default values section.
If the customer Exit variable is used in teh filter section , you will not be able to see data other than the value returned by the customer exit.
Regrads.
Shafi. -
Problem with variable in the woorkbook selection screen.
Hi All,
I have Problem with Variable in the selection screen. I have four variable in the report in this sequence
<b>Plant (optional), calendar month (mandatory), material (optional), Customer (mandatory). </b>
In Development system, I changed the query to fix the problem for a formula. saved and executed the query. In the selection screen appeared four variables and executed. after executing the query and I saved the work book also. I logged out of the Bex Analyzer. In the RSRT I generated the report by clicking the Generated Report push button. and again logged into the Bex analyzer and ran the work book, now in the selection screen, appeared three Variables only, I am missing the variable <b>Customer</b>.
The old report which is already in the Production system is working fine. What could be the mistake I did in the development system.
It is very urgent, I need to deliver this object as soon as possible.
Can I anybody help on the same.
Thanks in advance
NarendraYunus,
I did what you said. I removed the variable from characteristic restrictions, saved the query and executed the query, appeared three variables Plant, Calender month and material. executed and saved the work book. disconeted from Bex analyzer, in RSRT Generated Report and logged into Bex analyzer ran the work book for selection Plant, calender month and material and went into change query definition and added the variable for customer which was removed earlier and and ran the query for selections Plant, Calender monmth, Material and customer. saved the work book. disconnected from Bex analyzer and closed all excel sheets and work books. In RSRT Generated Report and again connected to Bex analyzer and ran the work book, now appeared only three variables again missed variable customer.
Yunus does any missed n the procedure what i did.
It is helped what Chris was answered.
Many Many Thaks for your time and replies.
Thaks in advance
Narendra -
i have couple of questions on variable screen while working with Web Application Designer
1) i am using variables with multiple single entries in my query and when the variable screen in WAD is displayed i have something called insert row icon for each of the variable i used. i do not want to display this icon. is it possible. when i have a single mandatory variable i don't see this icon
2) when i select a value for one of my variable, say for plant. then i only want the key to be displayed. whereas when i choose a particular plant i can see the key in the variable box and the text which describes the plant adjacent to the variable box. is it possible to display only key.
3) i have something like this
Plant Description
NJ New Jersey (description is seen adjacent to the key in the variable box)
now when i want to empty the screen and run the query for all plants i can delete the key but my description is still seen.
any idea
thanksthanks for your responses. i have another problem which is similar to the above ones
i have variables with multiple single values as optional. now in the variable screen if i choose to enter more than one value, lets say 2 values for the plant then i have two values and its text adjacent to the selection box.
since i am using optional variable and if the user wants to run the report for all the plants then he comes back to the variable screen and has to empty the selection box. the problem is we can empty the selection box but we are not able to remove the text description adjacent to the selection box which the user says its confusing.
is there any way we can get rid of it. may be when we refresh the variable screen can we write a code which simply displays the empty variable screen.
any ideas gurus
thanks -
To Supress variable screen in WAD - variable used in customer exit
Hi All,
We have a requirement to supress variable screen with WAD 7.0, but the report on which we have built the WAD contains a variable which is used to calculate quaterly utilization in customer exit and ready for input.
So as there is a variable in CMOD and used in report level, eventhough we supress variable screen in WAD, not getting supressed.
Can you provide some pointers.
Thanks,
Sri Arun PrianHi Arun.
Can you please tell me, is the variable entry mandatory? If yes please make the variable entry is optional.
Regards,
Lokanatha. -
Problem with variables in formulas when using CrystalReportViewer
Post Author: Aksu
CA Forum: Formula
Hi! I have a problem with variables in Crystal Reports formulas, when using CrystalDecisions.Windows.Forms.CrystalReportViewer class from VS2005-project. ReportViewer always gives error:*************Crystal Report Windows Forms ViewerThis field name is not known.Details: errorKindError in File C:\{dir]}\{file}.rpt:Error in formula <mCustomerAttributes>.'Dim result As String'This field name is not known.Details: errorKind ************* Report without variables works fine with Viewer and in Crystal Reports Designer report with variables works also fine. I have tried with both "formula-syntaxes" - basic and crystal. But Viewer always gives error when trying to define new variable.I think the problem might be with CR -versions, because VS-project has formerly been designed to VS2003 and CR9 or 10. Now I'm using VS2005 and CR11. Though I have changed all references to new CrystalDecisions-asseblies (Ver.11.0.3300.0), when I debug the project and checkout the Viewers ReportSources FormatEngine Shows version CR9_2.... I have no idea where it gets this version...***************DEBUG-view when Viewer is created *******************CrystalReportViewer |_ ReportSourceClassFactoryName ... , Version=11.0.3300.0 , ... |_ ReportSource |_ FormatEngine {CrystalDecisions.CrystalReports.Engine.FormatEngine} |_ ClientVersionHeader {CrystalDecisions.Shared.ReportServiceVersionHeader} |_ | version = 920 (int) |_ Static members |_ VER_CR9 = 920 (int)**************************************** Could anyone have any answers or tips for this problem? I'd really appreciate it... ---AksuHas anyone been able to answer this question?
I am having the same problem:
I am designing a report in Crystal Reports XI Developer that contains parameters, which are passed to a stored procedure and are also used within formulas ( in Crystal Syntax ie. {?FORMAT_ID} ) in the report itself.
I can run the report successfully in CRXI Developer. The formulas use the correct values from the parameters entered during execution and everything looks good.
I then deploy the report to Business Objects Enterprise XI. I do all of the things necessary to manage the report including setting up the proper database connection information and default parameter values.
When I run the report using the Crystal Report Viewer, I get the following error message:
Error in File Forecasting.rpt:
Error in formula <Report Format>.
'if (not isNull({?FORMAT_ID} ) ) then
This field name is not known.
Details: errorKind
This happens when I press the "Preview" button in the Manage Object dialog from Crystal or when I run the report using InfoView.
I have changed the formulas and it doesn't seem to matter what the specific content of the formula is; other than the existence of a parameter reference in the formula. If I comment out the parameter and replace it with a hard-coded value, it gets through the formula fine.
Does Business Objects Enterprise XI support crystal reports with parameter references in the formulas?
Thanks,
Tim H.
Edited by: Tim Haley on Nov 25, 2008 11:11 PM
Edited by: Tim Haley on Nov 25, 2008 11:12 PM -
Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!
I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.
-
Hi. I'm making a form for work for people to book places on
training courses. Having an annoying problem with variables that
i'm hoping has a simple solution. Any help with this will be much
appreciated.
All the info is held in an external text file which looks
like this (but much longer):
&totalcourses=2&
&course0=Please choose a course&
&course1=my course one&
&totaldates1=3&
&c1date0=Select a date...&
&c1date1=15 September 2006&
&c1time1=Time: 10:00 to 16:00&
&c1date2=23 January 2006&
&c1time2=Time: 11:00 to 16:00&
&c1date3=28 February 2007&
&c1time3=Time: 12:00 to 16:00&
&course2=my course 2&
&totaldates2=3&
&c2date0=Select a date...&
&c2date1=15 September 2006&
&c2time1=Time: 11:00 to 16:00&
&c2date2=08 January 2007&
&c2time2=Time: 9:00 to 16:00 &
&c2date3=15 February 2007
&c2time3=Time: 12:00 to 16:00&
The course titles are loaded into an array and then into a
combobox. When a course is chosen a second combobox loads the
relevant dates array for that course. When a date is chosen the
time is shown in a dynamic text box.
Problem is - if more than one course is on the same date it
will show the time for the latest course with that date. For
example - course 1 is on 15 sept at time 10:00 to 16:00, course 2
is also on 15 sept at time 11:00 to 16:00. When 15 Sept is chosen
for course one it displays the time for course 2 on this date -
presumably because it comes later in the text file.
I've attached the actionscript for this - Can anyone help me
sort this out??Hi. I'm making a form for work for people to book places on
training courses. Having an annoying problem with variables that
i'm hoping has a simple solution. Any help with this will be much
appreciated.
All the info is held in an external text file which looks
like this (but much longer):
&totalcourses=2&
&course0=Please choose a course&
&course1=my course one&
&totaldates1=3&
&c1date0=Select a date...&
&c1date1=15 September 2006&
&c1time1=Time: 10:00 to 16:00&
&c1date2=23 January 2006&
&c1time2=Time: 11:00 to 16:00&
&c1date3=28 February 2007&
&c1time3=Time: 12:00 to 16:00&
&course2=my course 2&
&totaldates2=3&
&c2date0=Select a date...&
&c2date1=15 September 2006&
&c2time1=Time: 11:00 to 16:00&
&c2date2=08 January 2007&
&c2time2=Time: 9:00 to 16:00 &
&c2date3=15 February 2007
&c2time3=Time: 12:00 to 16:00&
The course titles are loaded into an array and then into a
combobox. When a course is chosen a second combobox loads the
relevant dates array for that course. When a date is chosen the
time is shown in a dynamic text box.
Problem is - if more than one course is on the same date it
will show the time for the latest course with that date. For
example - course 1 is on 15 sept at time 10:00 to 16:00, course 2
is also on 15 sept at time 11:00 to 16:00. When 15 Sept is chosen
for course one it displays the time for course 2 on this date -
presumably because it comes later in the text file.
I've attached the actionscript for this - Can anyone help me
sort this out?? -
Problem with Variable Client Support
Hello,
I work with Labview 8.5 and Crio 9014.
I have a problem with Variable Client Support. When I try to compile my project I have the following error:
"The Network Variable Engine and Variable Client Support must be installed on the RT target for this application to function properly..."
I have read that we have to install the Variable Client Support in Measurement and Automation by right-clicking on the software and then choosing add/remove software but I can't install the appropriate shared variable components because I can't see neither Network Variable Engine and Variable Client Support. So what can I do?
Can somebody help me?
ThanksI have exactly the same problem. I wanted go through the "Getting Started with the LabVIEW RT module" and when I use wizard for generating new project I get same notification in my VI...
The Network Variable Engine and Variable Client Support must be installed on the RT target
for this application to function properly. If the Network Variable Engine is not supported on
the target (e.g. FP-2000 with <32MB of RAM), open the project and move the variable library
to My Computer in the project. Doing this will deploy the variables to localhost but
will still require that Variable Client Support be installed on the RT target.
Could someone help please ?
Attachments:
ni.png 95 KB -
Problem with sub-screen actions on Cancel button
Hi all,
I have a problem with sub-screen.
I created a subscreen (screen sequence in MM01/MM02/MM03). When users leave this screen, I call POPUP_TO_CONFIRM to ask if they want to save the data.
1) My goal is: when they choose Cancel, no actions are performed and users will see the current screen. However, I cannot use command: SET SCREEN 0 or LEAVE TO SCREEN 0 because the system gives an error message:
*SET SCREEN not allowed in subscreens*.
2) How can we determine when the user leaves the screen? which value of SY-UCOMM will be used to check this?
Thanks in advance.for dis SET SCREEN is not required.
Consider d code given below as n eg:
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'SAVE'
text_question = 'SOME _QUS'
text_button_1 = 'YES'
text_button_2 = 'NO'
default_button = '2'
display_cancel_button = ' '
IMPORTING
answer = l_ans
EXCEPTIONS
text_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e066.
ENDIF.
IF l_ans EQ '1'. " when yes is pressed
MODIFY db.
commit work.
leave program.
ELSEIF l_ans EQ '2'. "when no is pressed
leave program.
ELSE. " when cancel is pressed
ENDIF.
In above module when Yes is pressed it saves data den leave prog.
As no action is specified for cancel button it will remain on that screen only from which popup is called, in this way ur problem can be solved.
Reward properly. -
Not sure if this is the correct forum.
Okies, a user of mine has a problem with her SAP screens. It seems that she can't view the full screen of CJ20N She has to drag the window bigger to be able to see the content. She uses this window in a split monitor view, i.e. some of the applications are displaying on the laptop window while other applications display on the monitor.
Details of her SAPGUI:
Release 640 Final
File version: 6404.4.16.1015
Build: 774474
Patch Level : 16
Do note that her primary monitor (notebook) is always set to 1280x800 and the secondary monitor is set to 1024x768. Anyone encounter this problem before?Hi,
This is problem with windows screen resolution. Better to use, maximum supported window size and make sure to use same size for both the screens.
Regards,
Ganesh -
Problem with matrix/screen in Qosmio F55-Q502
Hello
For a few weeks I have strange problem with matrix/screen in my laptop.
The matrix flickers very often - no matter if power cable is plugged or not.
The screen is full bright and suddenly it starts to blink - it is getting darker, than lighter, usually for few/dozen seconds. It does it when nobody touches it or when I work on it.
It very annoying and making eyes tired - it does it very quickly and there are few levels of screen brightness.
Moreover sometimes the screen turns off - You can see what is on desktop but the screen is very very dark (but not blank or completely switched off). It happens without any reason - sometimes just in the middle of working, sometime for example when I touch (not pull) the power cable between laptop and power supply.
Then, the only way to get back to normal brightness of screen id to close the lid just for half a second and open it
- matrix lights then normally, but can "turns off" moment later and I must do it once again - sometimes even few times..
After "action" with lid screens seems like nothing ever happen..
Does anyone have idea what is the cause of such behaviour or how to diagnose it in details?
Or maybe solve this problem?
Best regards
300mSounds like the Backlight or Inverter is failing or there is a loose connection.
Is the unit under warranty? Send it to an ASP for repair.
You should avoid repairing it yourself, the backlight is very high voltage! -
X220:Graphics problem with full screen videos
I have got my X220 laptop last month. I am facing problem while playing youtube videos full sceen.
videos can be seen best with smaller window but there is major graphics problem with full screen.
Can someone help on this?
I am using Windows 7 Enterprise edition.
Thankswhat do you mean by major graphics problem, please elaborate.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Ok I am getting problems with full screen graphics on some computers.
I am writing an internet based RPG and this is really eating into my time...
Can any one explain why my graphics will not show some times (works others) with the exact same code running....
I am using a BufferStratagy with a frame.
Any help would be gladly apreashiated thank you in advance,
PhibredNot a thread issue, no thread on this side of the program and yes there is a media tracker. However I have learned that my problem was that my screen does not like to flip to 800x600 for java applications for some reason thx any way.
-
with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????
We are users here. We cannot possibly know when a new update will be available.
Maybe you are looking for
-
Update from windows 8.1 pro evaluation copy to windows 8.1
Greetings. Today i suddenly got BSOD when i play some games. It was too fast i cant see what the error is. And after my pc restart thers an error messege it says my windows evaluation copy has expired and will restart every 2 hour and it told me to d
-
Dear Experts, Is there any report in MM where we can get End to End details of an procurement activity. For e.g from PR to RFQ,Contract, PO,GR, GI, Miro, payment.... Please do help. Thanks in advance. Dominic Rajan
-
Creating environment in solution manager 4.0
I have been assigned to create a an environment within Solution Manager under Business Process however I do not know how to do this, can somebody please advice me on how to do this or refer me to the correct guide or CBT. Any help would be much appri
-
Converting 7.3.4 LONGs to 8.1.7 Varchar2(4000)
Hello all, I have a table in 7.3.4 that has a long field because the data was just about 3500 characters long. Now we are upgrading to 8.1.7 and I want to change all the long fields to varchar2(4000) and insert the data. Can anyone tell me how to do
-
We upgraded from CS5.5 to CS 6. Whenever we click on a file to open, it asks to "Open With." The desired program is not an option, so we browse to locate it. Nevertheless, the file still can not be opened with the right program. To open it, I have