Problem with vibration noise

Hi everyone,
My new xperia Z1 is all good with the software side. But i hear some noisy sounds frequently whenever my phone get vibrtes. That includes incoming messages, call, and all but when i turn off the vibration its all good ... I 'm much worried about how to solve the issue... I even visited a service center too.. but I didn't get proper response from them... they ask me to visit another service center. In another they said to visit another....with my busy schedule i am unable to go back on service center..much worried about how to solve this... please help...

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I'm sorry to hear that. All the service centers may not be able to examine or repair the Xperia Z1. I suggest that you contact your local support team for further information about service center and/or how to proceed with this in the best possible way:
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

As you are asking about it, looks like you do see a problem. So if googling does not provide a solution, you should describe the issue in detail so we can try to help out.

Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?

Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?
I´ve installed a week ago but i downgraded to SL again. My CPU was hotter and high rpm fan eve in idle state.
Does fix 10.7.1 this issues?
I´ve got first generation macbook air, 2gb ram, ssd 60gb .

Simply NO, we´re still waiting....

Problem with active noise cancellation function : ...

My nokia 6720 have problem with active noise cancellation function. It seem not working because it also have noise when this function is active. So, I try to disable this function and found that the noise is reduce (but still not clear). How do I correct this problem?
Thanks.
P.S. Firmware version is 012.008

"I must must achive a segnificant attenuation of the noise in a closed volume using some NI devices ..."
At first glance I would say "probably can be done using an FPGA as a target" since the FPGA can close a very fast loop.
But to do that with a microphone input on a PC running Windows...
I suspect that would be an exercise in futility.
Anyone out there been able to turn around a microphone input fast enough to something like this?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Problem with clicking noise and using hdapm

I'm having a problem with my 2009 17" MacBook Pro, with Lion. I installed a new, larger hard drive, and ever since then a tinny clicking noise has been emanating from the laptop. I tried to install hdapm, and I am able to successfully download the .dmg file and mount the disk image. However, at this point, all I see is a .pkg file. I clicked to install the program, abd then added the command to Lingon to execute 'hdapm disk0 max' upon startup. However, Console said that it failed to execute this command. I tried entering it directly on Terminal, and still no luck. It should be compatible with my hard drive, but I'm not sure what I'm doing wrong. From what I've gathered, there should be another file in the original disk image that I can move into my Applications folder; however, I could not find it anywhere. Does anyone have any suggestions about how to resolve this issue? Thanks!

This is not a disk failure problem, regardless of how there are disk failure modes that act like this. It is a hard disk firmware situation that conflicts with OS hd controllers. It is a problem that comes and goes, or gets less of a problem or more of a problem depending on OS upgrades. Although I have it happening with a Seagate drive, it is reported on Western Digital drives.
It is also not only exclusively a Mac hardware problem or software problem. There are comments on Dell's forums, and even a Seagate firmware upgrade (which I fear to do.) There are also solutions where people boot to Unix, do the fix there, then reboot to Mac and it disappears and stays disappeared.
==>> N.B. – In Lion and the last couple versions of SL, you need to place a 'sudo' in front of the 'hdapm disk0 max'. Then it will work...for a while...maybe.
I have modified versions of the airport plist in the past from 'always on' to 'when needed' and that helps until the OS changes something. Then the same 'fix' won't make the constant head parking stop.
Different combinations of programs will start it up. Sometimes just getting the head busy for a while, like playing songs on iTunes, will stop it and upon closing iTunes will continue to keep it off. (Playing songs with a lot of percussion will not disguise the problem since by the time you try that you will be sensitized to hear the sound even when it is -96dB from ambient.)
A new variation with Lion has been to get the click going a couple minutes !!!after!!! putting the system to sleep! In fact, this problem has never been so uncontrollable as with Lion.
...and that is why I am back searching the forums to see if anyone has an up-to-date solution.

Problem with hissing noise of earphone on nokia e5...

I have a new brand of E50 but It's a problem with quality of sound on the earphone speaker.During the calls I hear the hissing
noise.Is it problem of this model or my headset is defect?

Hey. Really sorry for late answer. i got same model (but i7 , r7 m265 )
For the fan noise ; check out gpu and cpu temperatures . clean the fan dust with power manager program. and update drivers.
for the battery , %1 wear is nothing . only affects 1-2 mins . battery has internal smbus battery fuel gauge and it automatically calibrates battery full charge capacity. but you can manual calibrate fcc with power manager. we are very lucky because on some hp ,samsung etc laptops , battery comes with %10 wearage (like my old laptop).
you post this message 6 months ago. if your battery wear is >%15 now , send battery to service. they will replace a new battery. if battery wear <%10 , your battery is normal

Adobe Photoshop CC, problem with color noise/pixelation on the monitor display

After downloading Adobe Photoshop CC, my images come in with color noise/pixelation on the monitor display. I've tried checking the color space preferences, but this doesn't help. I didn't have this problem before. Is there anything else I can check? There's no problem with LR, just Photoshop.

My performance settings are: Available RAM 10905 MB/using 7633 MG (70 percent); cache levels 4, history 20, cache tile size 1024K. However, I noticed under Graphics processer settings, it is set on Advanced Drawing Mode - perhaps this should be changed to Normal or Basic Mode? Your help is very much appreciated.

Problems with ambient noise in video

Hi,
I've been having problems with this weird noise. See, I went to an event a few weeks ago and I took one clip of an actor and recorded it on my Panasonic DMC-TZ5 camera and transferred the footage to iMovie. It seemed fine to me but when it reaches 2 minutes there's this noise that blocks out the actor talking and then seems to fade more into the background at over 3 minutes and you can hear him again for the rest of the video. Is there any way I can eliminate this noise problem and if so, what application should I use? I tried to "normalize clip volume" when opening up iMovie but that didn't really do anything. I've heard of Soundbooth and other audio aps but I have never used them before so I have no clue where to start.
I have uploaded the video on YouTube:
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/7f5ewdeGwVo&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/7f5ewdeGwVo&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
...And nothing is more irritating to receive comments from others who complain that the sound is horrible. Any suggestions?
Thanks in advance!

You shouldn't have used 'Normalize' with video like this, which has a very low speech volume (..the mic seems to have been pointed towards the audience, not the actor).
'Normalize' brings everything up to a constant, "solid" volume level. So if a voice is quiet, all the background hiss is brought up to a higher volume along with the quiet voice itself. Where a speaker pauses, and the voice is absent, the background hiss and noise may become even LOUDER to bring everything up to a standard high volume level!
So if it's not too late - but I suspect it is! - you should really Undo the 'Normalize' setting ..but once things are Saved it's probably impossible to Undo that.
The noise which starts at 2mins and runs to 3mins may be some artifact produced by the software which did the Normalization ..I don't know for sure. It's a weird "artificial" sound, rather similar to repeated "out-of-phase" abnormalities, and has many characteristics of having been created by sound-manipulation software.
Because that extra noise is not completely solid, regular and constant (..like a solid constant hum, or a constant buzz..) it would be very difficult to remove it ..and removing it would remove virtually all of the actor's voice, because the weird noise is so much louder than the actor's voice.
Programs like 'SoundSoap' (..click on that blue link for info..) promise to "remove noise" ..but they can only remove regular, constant, single-frequency noise well.
Even 'SoundSoap Pro' wouldn't be able to remove that noise and leave the actor's voice behind, as so many of the frequencies (..highs and lows..) of that noise coincide with his, and others', speech frequencies.
So you'd end up - if you did try removing the noise - with an extremely faint and "thin" sounding voice, which came and went, pretty much disappearing into some background hiss, and it would sound as if it were heard coming out of a water pipe.
If you can go back to your original camcorder recording (..before 'Normalization'..) I suggest chopping out that one minute which has the "noisy" material (..if it really was there on the original). Then use the free 'Audacity' program..
(..click on that pic, above, for a larger, clearer image..)
..to remove the background hiss and to boost mid-range sounds, then the actor's voice would come out much clearer, and you could also increase the overall volume, too - but without 'Normalizing' it until you'd first removed as much background hiss as possible, and had boosted his mid-range voice to greater prominence.

Problem with fan noise and battery on g510

I bought an new lenovo g510 ( core i5 4200m and amd r5-m230 ) from 3 days
and notice that fan has a noise most of the time and when i check the battery wear level on hwmonitor it is has 1 % wear level so why i got these problem and my laptop is bought from just 3 days !!!!!!

Hey. Really sorry for late answer. i got same model (but i7 , r7 m265 )
For the fan noise ; check out gpu and cpu temperatures . clean the fan dust with power manager program. and update drivers.
for the battery , %1 wear is nothing . only affects 1-2 mins . battery has internal smbus battery fuel gauge and it automatically calibrates battery full charge capacity. but you can manual calibrate fcc with power manager. we are very lucky because on some hp ,samsung etc laptops , battery comes with %10 wearage (like my old laptop).
you post this message 6 months ago. if your battery wear is >%15 now , send battery to service. they will replace a new battery. if battery wear <%10 , your battery is normal

Problem with Gradient Noise in "save as PDF"

I'm trying to save a design as a pdf, using the high quality print/illustrator default options. The output is generating a bunch of noise in a corner of a couple of gradients, and also some line noise where different gradients meet. I'll include a screen shot of the pdf exported as well as a jpg exported to illustrate the difference. PDF export is the only one that's generating this noise, everything else I try works fine. I've tried changing presets, adjusting the transparancy flattner settings, leaving appearances live as well as expanding them. Nothing seems to work. Any help is GREALY appreacited as I'm trying to turn this file over ASAP!

Here's an isolated piece of the AI, I exported to confirm that it has the same problem. I put the ai and pdf up on my server:
http://www.dbitmusic.com/illustrator/PuzzlePieces.ai
http://www.dbitmusic.com/illustrator/PuzzlePieces.pdf

Iphone6 plus has problem with vibrating

I just got the iphone6 plus within a month,the phone is not vibrating when receiving messages and incoming calls, and it creates a sound like 'zzzzh zzzzh' instead of vibrating,I definitely turned 'vibrate on ring and vibrate on silent' on,and didn't set up 'do not disturb'..what was wrong with my phone??? Is it the system failed??

Hello lgw_11,
If your iPhone is not vibrating the way you expect, try changing the vibration pattern to see if you get a different result than the 'zzzzh' pattern you are getting.
Change sounds, ringtones, and alerts on your iPhone, iPad, and iPod touch - Apple Support
https://support.apple.com/en-us/HT204019
Have a good day!
- Judy

Nokia X6 - problems with vibration & screen lock

Hi,
I have noticed that my X6 doesn't vibrate very strongly, nor is the sound quality of the ring tones very good. When it is in my handbag, I can barely feel or hear it despite having the volume on full.
If I put it on silent, I can't feel it all - even in my pocket.
Does anyone else have this problem or should I consider taking it back?
One other thing - when I am on a call the proximity sensor doesn't seem to work - I have to lock the phone using the lock button to stop from accidentally putting ppl loudspeaker, or mute etc...
Its very frustrating as this is a great phone!
Anyone have any comments??
Thanks,

I would consider taking your phone back to the supplier for a replacement or to a Nokia Care Centre to have it looked at. The X6 should vibrate quite firmly, at least mine does and it has very clear and loud stereo speakers. Also, as you have already suspected, the proximity sensor does sound like it's faulty. Yep... take it back.
Having said all of the above, please bear in mind though that even a fully functioning X6 will struggle to make itself heard or felt in the confines of a handbag as the sounds and vibrations will be absorbed by the handbag itself plus all the other contents. I guess it also depends on how big your handbag is too and how much other stuff you keep in it.
*EDIT* One last point I just remembered, check to make sure that you have vibrations enabled in your silent profile. I just re-read your comment about no vibrations in silent mode. Goto:
Menu > Settings > Personal > Profiles > Silent > Personalise > Vibrating alert > On
remember just because you've selected a silent profile doesn't necessarily mean that vibration has been activated unless you check the above setting.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

The problem with de noiser on sound in Premiere pro 2014.1

I use de noiser on the sound file in TL. but after rendering its action does not begin immediately, but after 2 seconds. This happens no matter, applied de noiser to the clip, or the entire track.
sorry for my bad english.

Hi Rowen,
I sent you a PM. I hope I can help you resolve this issue.
Thanks,
Kevin

Guys please help me..i am having an iphone 4 with ios 5.01 and i am facing some problem with vibration mode of the cell..it vibrates only sometime during an incoming call or incoming message..how to fix this up

.....

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

Scary "rattling / vibrating" noise with iMac DVD drive

I have an iMac for 2 months now and experience problems with the DVD drive. With some DVDs (not all, but still too many for my taste) it spins around quite fast and makes a scary sound as if the DVD is vibrating (rrrrrrr) inside the iMac's superdrive. I am a bit affraid it will damage my DVDs. When I try to burn a DVD with iDVD or Toast the DVD is ejected by the system with a HW error.
I called the Apple help desk and was asked to burn a DVD with finder. That went ok. Next DVD with iDVD failed. I was asked to install iDVD again, because they thought it could be a software issue. The next DVD I could burn without problems, so the case was closed. Later burning some DVDs failed again, but at the moment the majority succeeds. And reading some already written discs makes sometimes a scary noise, but I can still read them.
I am not sure if I should call apple again, because it not always fails. It is very disappointing to be having these problems with my first Apple. Didn't expect that at all. Every time I insert a DVD now, I wonder what will happen. But it would be a pity to have to add an external dvd reader/writer to the beautiful integrated iMac.
Anybody a suggestion, or is it better to call Apple again?

I also have this problem with my 2.4ghz, 24" iMac. It started a few months back and it didn't seem to affect the media I stuck into it and for about 75% of the time the vibration was minimal. Now some DVD media are getting stuck in the drive and it takes a lot of tries with the eject button before enough of the DVD or CD shows itself to pull it out ... otherwise it gets sucked back in and I am back trying again.
What has just freaked me out is that some of the discs I have just burnt, when inserted, ask whether I want to write them i.e thinks they are blank ... when they go perfectly on my powerbook or my wife's G5 iMac. I just thought I would check out the support forums for a lead, but doesn't seem like a regular fault so its off to the repair shop under warranty (up to a week wait around here).
So can't help that much iDijkman ... I suppose get it fixed while you still have some warranty.

Problem with vibration noise

Similar Messages

Maybe you are looking for