Problem with video, Quality gets all messed up

I'm burning a video thats about an hour and even minutes long, with about 3 short little extra videos on there that are about five minutes long each
I burned the DVD with best quality.
The Menus are fine, and two of the short videos are fine
but after like 5 minutes on the main video, it starts to get all distorted and chopy and all this green distortion comes up and its just a mess
I would burn it with best performance, but it says its to long for that
I NEED HELP!!

QT and FCP show you different colors. You need to go into QT and enable FCP color compatibility. I believe it is in the SHOW MOVIE PROPERTIES, then the VIdeo track, then VISUAL SETTINGS. Somewhere in there.
Shane

Similar Messages

  • Having problems with video quality in iDVD 09

    I have created a slide show in iMovie with audio. When saved it is in a .mov format. I burned it to DVD using the burn folder option. It has great video quality in that format. Since most DVD players won't accept the .mov format or some PC's, I wanted the most common format for viewing. I exported the movie to iDVD and used these settings..
    Video Mode-NTSC
    Aspect Ration 16:9 widescreen
    Encoding-Professional Quality
    DVD Type-Single-Layer (SL)-4.2 GB
    When going from the .mov format to the MPEG-2 format ( I think this is the output format for iDVD)
    The quality is very poor. It seems to have wavy lines throughout the file, especially when someone is wearing patterned clothing.
    Anyone know how to get the same quality of the .mov file to something that will be viewable across multiple platforms???
    Would using moviegate conversion software be an answer????
    Message was edited by: inthecards

    inthecards wrote:
    .. Anyone know how to get the same quality of the .mov file ..
    a mov can contain all kind of codecs and esp. resolutions..
    a videoDVD, by standards, has a 720x480 res, and is interlaced.
    => quality HAS to be 'lower' than any 5Mpix on a HiDef computer screen..
    but, I did tons of slideshows with iMHD6 and iDVD.. for me, quality is superb.. for sure, tiny 'checker patterns', 'sub pixel lines' etc. HAVE to flimmer..

  • Wierd problem with video playback getting corrupted

    I have a "week 38" iPod Touch 16 that didn't exhibit any negative black issues or other problems.
    But ever since I did the 1.1.1 update I sometimes get weird psychedelic colors in the dark areas of the video playback (iTunes purchases or YouTube). A reset (holding both buttons for 10 seconds) solves the problem, but it will sometimes come back a few days later.
    Anyone else seeing this?

    Same thing has happened on my 38 wk model, once.
    It happened first on You Tube, so I thought it was a problem with that but, when I checked some videos they were also, 'psychedelic'. Those I knew WERE fine as I had loaded them only that morning and they were beautifully crisp and clear.
    I was actually, showing it to a bunch of people at the time and that was a real let down after their initial 'WOW' reactions at the device.
    Fortunately, I shut down. And when I restarted, all was back to normal.
    Hope it doesn't do it again!!!

  • Problem with Video Quality when exporting to Quicktime or using compressor

    I've attempted exporting a video sequence (stills with transitions, video footage and audio tracks) directly as a QuickTime Movie and using Compressor (Apple-DVD-HD_30 Minutes) for import into DVD Studio. The export process seems to work well for each. Only problem: the video seems to get a bit distorted at random spots. The best way to describe the distortion: images (still and video) seem to blur and squiggle for a few frames at a time. This distortion is especially prevalent during more complex transitions (3 Spins and such). The sequence is nice and clean in Final Cut. I'm only seeing this distortion after export. Thanks for any thoughts you might have on this issue.

    @Harm,
    "Pear-shaped" (or sometimes "fruit-shaped") is a euphemism meaning that the effort has gone awry; it was a mess.
    @John,
    Export to DVD is a PPro 2.0 function; in CS3 it is now Export to Encore. Is that what you meant?
    First thing is to check the field orders of your source material and of your export settings. Don't invert them, and don't deinterlace interlaced footage.
    Perhaps a short list of the settings you have tried (and why you chose those settings) would help us help you.
    -Jeff

  • PE3 problems with video quality when exporting

    I've had this issue when putting DVD movies I own onto my iPod, but because I'm doing a client video now, it's crucial that I get the highest possible video and sound quality out of my project. Because the project I'm working on will be about 45 minutes long, I wanted to avoid working on the whole thing in one file since Premiere begins to refuse to let me do the simplest functions if I have too many clips in the timeline. I've been splitting the project up into segments and my plan is to export them and work with them as single clips when compiling the final project together.
    Now here's my problem: I export the segments as HDV 1080 60i files for the highest quality possible, but whenever the exported file is played, these horizontal lines appear on the screen. It's as if the colors are smeared a bit. I honestly don't know how else to describe it. On an iPod, it's only slightly noticeable, but on TV screens like this project will be played on, it'll be too distracting to be acceptable. Can anyone help me out here?

    No, all I'm trying to do is export it to the highest quality video so it can be put back into Premiere to be exported again along with several other clips (also exported in the same way). From there, I'll use different software to burn the entire file onto a DVD. No Blu-Ray, no camcorders, not even firewire connections (my computer doesn't have any). It's just going to be used by some 150 families to be viewed on their DVD players once the product is finished.

  • I am having problems with my ipod syncing all of my videos to my ipod from my itunes playlist, it will only sync about half even though they are all checked

    i am having problems with my ipod syncing all of my videos to my ipod from my itunes playlist, it will only sync about half even though they are all checked

    I assume there is more than ample space remaining on your iPod to hold all the videos?  Are you getting any error messages during the sync process?
    Do all of these videos play okay in iTunes?  Is the sync only checked songs and videos option enabled from under the iPod's Summary tab?
    What other setting do you have enabled from under the iPod's video configuration tab in iTunes?
    B-rock

  • I am having problems with video and high content webpages freezing.  I am also getting pixel lines across my webpages.  Maybe two or three lines.  I was running os 10.4 but I just up graded to 10.6 the other day.  I have 2GB of RAM.

    I am having problems with video and high content webpages freezing.  I am also getting pixel lines across my webpages.  Maybe two or three lines.  I was running os 10.4 but I just up graded to 10.6 the other day.  I have 2GB of RAM.

    Exactlly which model iMac do you have?
    see > How to identify iMac models
    Unfortunately that is not all that uncommon for the Early Intel iMac's given there age and the fact that the air intakes are probably choked with dust. Then add the extra heat caused by running a more intense OS X which is causing it to run a little warmer than normal and putting extra stress on the graphic and display components.
    My 6½ year old 17" Early 2006 Core Duo w/2GB of RAM is also running 10.6.8 and is also starting to get a single line that (knock on wood) goes away after a few minutes, while many others started getting permanent ones after 2 or 3 years. One thing that I think has helped, is that about every 3 or 4 months I shutdown and vigorously vacuum out the bottom grill work and small vent under the stand to keep it running cool.
    On that note: unfortunately I can only suggest that you clean your intake vents and hope that no permanent or irreversible damage has been done.

  • I am having problems with my 3D preferences, all I can see is "Get more content" and " 3D Print Utilities"

    I am having problems with my 3D preferences, all I can see is "Get more content" and " 3D Print Utilities"

    That means either your graphics card does not support 3D or that there is a problem with your graphics drivers. See if your GPU maker has an update.
    Error: "Graphics hardware not officially supported for 3D" | Photoshop CC, 13.1

  • Problem with video playback with iTunes

    Several problems :
    Problem with video playback with iTunes -
    Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
    Problem with permission disk errors
    After re-installing White Tiger and After I installed the last OSX 10.6.5 update
    I found the following problem
    Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
    Last but not least :
    My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .

    What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.

  • Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.us there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PCM anymore.

    Hi am having problems with iTunes,I have all my music on my 4s but I bought the iPhone 5 today.is there any way that I can transfer music over to my new phone without using the library?as it doesn't seem to be on my PC anymore.i reset my pc and save my iTunes to a hard drive but can't access it.Need help please

    " When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
    Correct.
    " How can I get that music to show up in my library now on my new computer?  "
    Copy it from your old computer or your backup copy of your old computer.
    The sync is one way - computer to ipod.

  • Has anyone had a problem with Draft Emails getting sent with Mac OS 10.8.2? It just happened to me and sent a few drafts out to a potential employer I planned on sending out torrow.

    Has anyone had a problem with Draft Emails getting sent with Mac OS 10.8.2? It just happened to me and sent a few drafts out to a potential employer I planned on sending out tomorrow.

    Hi, one question & one suggestion...
    What possible things are connected at home but not at the store, inlude every cable, etc.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • I cannot drop any pictures in iMovie 9 (no problem with video)

    I cannot add any pictures in iMovie 9. I have no problem with videos, but when I want to drag and drop pictures, it does not work. (Pictures do not drop..) Does anyone know how to do?
    Thank you a lot

    You need to create a play list of songs that you would use for movies - mine is called Music for Movies.  Then when you click on the music icon (the first box in the line of 5 in the grey bar across the lower third of the screen) and a drop down menu will appear showing all your play lists.  Then simply drag and drop, but make sure that you hover over the video clip that you want to add the music to.  If you don't the music will be added to the start of your presentation.  You can always move the position afterwards. NOTE - if you want to add to your play list do it before you start your video editing as the list does not always update when I Movie. 

  • Problem with Video capture Device

    i have a problem with FME. i am using Avermedia TV capture
    device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
    the FME interface the warning given for " Problem with Video
    Capture Device".
    i read all the topics in Flash Media Encoder Category, if
    this problem occures my capture device ( i expect MPEG ) how to
    solve this problem?
    Thanks,

    The Device Matrix is something we'll be updating in the
    future as we continue to test more and more equipement. Ideally, I
    would like for users such as yourselves to be able to add to it and
    tell us what has worked for you as well. If anyone has any ideas
    about what technology we should use to do this (e.g., this forum? a
    wiki?) please let me know.
    Regarding the devices not working - the main problem we see
    is that the system requirements are not being met. Here is what to
    check for:
    - are you running on Windows XP (only supported OS right
    now)?
    - do you have DirectX client runtime version 9c or higher
    installed?
    - do you have hardware acceleration enabled?
    - do you have 32bit graphics enabled?
    - do you have the latest direct show drivers from the
    card/device manufacturer?
    Thanks,
    Chris Hock
    Adobe Systems Inc.

  • Motorola SB5101E - problem with video chat

    Hi. I have cable modem Motorola SB5101E and connect to net be cable TV .
    All is normal , functional, audio, text, etc. but I have problem with video chat be iChat. (3,1) According info from Motorola support is this cable modem without firewall and without any ports, cable TV provider was inform me, so in his server is none block none ports for me, therefore I have maybe any problem in me computer. But Where ? Can you help me anyone ? Thank you in advance and have a nice day.

    Hi Jirka:
    Do you have your firewall active on your mac? (System preferences>Sharing>Firewall) If the firewall is on, you need to open some ports.
    Report back and give us more details on your set up to troubleshoot your issue.

  • FMLE 3.0.0.4743 Problem with video capture device

    log:
    Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
    Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
    Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
    Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
    Flash Media Encoder 2.5 working without any errors

    The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
    Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Maybe you are looking for