Problem with WAD 3.5

Hi Guys,
I am facing a problem with Web report display.
I can not see any attached logo,navigation block,tables.In those places a 'cross' mark is coming.
I can see only values.Can any body help me on this.
Thanks,
Suravi

Hi,
We had the same problem..and when we reatarted our Production server ,,it got rectified.
CHeck if it fits u.
Hope this helps u...
Best Regards,
VVenkat..

Similar Messages

Problem with WAD transports

Hi there
We have a problem with transporting templates created in the WAD.
The transport goes through succesfully, but when I run the template(s) in PROD, the changes are not reflected.
If I open the template in the WAD in PROD, then I can see that the changed template is indeed in PROD, but executing it in the portal shows the old template.
We are seeing this problem now with templates, but noticed it about a week ago with reusable library items that weren't updating correctly in PROD. The way we resolved it on that occasion was with a server reboot (J2EE)
I am sure a Java restart will do the trick again this time, but we can't have a situation where we need to restart systems each time a transport is sent through ... that's ridiculous.
I imagine there is some sort of caching holding onto the old items, but I don't know where to look to clear that cache.
Please, can anyone provide some assistance on this?
Cheers,
Andrew

Hi Andrew,
i think that you will find the cache in 'RSRT' T Code.
and refresh will also help this problem.
If not then find the ABAP Program and regenerate it.
Hope this will solves your problem.

Loadrunner testing problem with WAD 7.0

HI all,
I've lately encounter a problem with loadrunner testing BI 7+EP 6, when submitting variables before generating a report in portal with 2 or more than 2 vusers.
The problem codes as follows,
web_submit_data("com.sap.ip.bi.web.portal.integration.launcher_4",
          "Action=http://ncgcucd:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher",
          "Method=POST",
          "RecContentType=text/html",
          "Referer=http://ncgcucd:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher?sap-bw-iViewID=pcd%3Aportal_content%2Fcom.ncgc.pct.folder.ncbw%2Fcom.ncgc.pct.folder.ncbw.role%2Fcom.ncgc.pct.bw.role.ydjcykhaqgl%2Fzyfx%2FZANCCSM01_Q_101&sap-ext-sid=pAYYK3imMNNJjTjL*mKg4Aggw7o2cRS_TL1fx2I2jeGg&NavPathUpdate=false&buildTree=false",
          "Snapshot=t21.inf",
          "Mode=HTML",
          ITEMDATA,
          "Name=BI_COMMAND", "Value=", ENDITEM,
          "Name=BI_COMMAND-TARGET_DIALOG_REF", "Value=DLG_VARIABLE", ENDITEM,
          "Name=BI_COMMAND-BI_ADVANCED", "Value=DLG_VARIABLE_vsc_DropdownVariants", ENDITEM,
          "Name=BI_COMMAND-BI_COMMAND_TYPE", "Value=PASSIVE_VALUE_TRANSFER", ENDITEM,
          "Name=BI_COMMAND-PASSIVE_ID", "Value=DLG_VARIABLE_vsc_DropdownVariants_combobox", ENDITEM,
          "Name=BI_COMMAND-PASSIVE_VALUE", "Value=", ENDITEM,
          "Name=BI_COMMAND_1", "Value=", ENDITEM,
          "Name=BI_COMMAND_1-TARGET_DIALOG_REF", "Value=DLG_VARIABLE", ENDITEM,
          "Name=BI_COMMAND_1-BI_ADVANCED", "Value=DLG_VARIABLE_vsc_CommonVariablesList_VAR_1_INPUT", ENDITEM,
          "Name=BI_COMMAND_1-BI_COMMAND_TYPE", "Value=PASSIVE_VALUE_TRANSFER", ENDITEM,
          "Name=BI_COMMAND_1-PASSIVE_ID", "Value=DLG_VARIABLE_vsc_CommonVariablesList_VAR_1_INPUT_inp", ENDITEM,
          "Name=BI_COMMAND_1-PASSIVE_VALUE", "Value=2009.06 - 2009.07", ENDITEM,
          "Name=BI_COMMAND_2", "Value=", ENDITEM,
          "Name=BI_COMMAND_2-TARGET_DIALOG_REF", "Value=DLG_VARIABLE", ENDITEM,
          "Name=BI_COMMAND_2-BI_COMMAND_TYPE", "Value=OK", ENDITEM,
          "Name=PAGE_ID", "Value=1_cEFZWUszaW1NTk5KalRqTCptS2c0QS0tZ2d3N28yY1JTX1RMMWZ4MkkyamVHZy0t", ENDITEM,
          "Name=REQUEST_ID", "Value=1", ENDITEM,
          EXTRARES,
          "Url=/irj/portalapps/com.sap.portal.design.urdesigndata/themes/portal/NCGC_MAINTHEME/common/button/6x1_btn_emph_hover.gif?7.0.15.1.16", "Referer=http://ncgcucd:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher?sap-bw-iViewID=pcd%3Aportal_content%2Fcom.ncgc.pct.folder.ncbw%2Fcom.ncgc.pct.folder.ncbw.role%2Fcom.ncgc.pct.bw.role.ydjcykhaqgl%2Fzyfx%2FZANCCSM01_Q_101&sap-ext-sid=pAYYK3imMNNJjTjL*mKg4Aggw7o2cRS_TL1fx2I2jeGg&NavPathUpdate=false&buildTree=false", ENDITEM,
The error message from NVA is as follows,
Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: BEx Web application "1_dUlPQXdMcDlfajRoakkzWDdlb2pFUS0tQmpaYnk1YXo5WVZGZkdaMUtwTVlGQS0t" does not exist. The application was either ended by a timeout or an error occurred, which was entered into the trace log. See SAP Notes 937697 and 948490
com.sap.ip.bi.base.exception.BIBaseRuntimeException: BEx Web application "1_dUlPQXdMcDlfajRoakkzWDdlb2pFUS0tQmpaYnk1YXo5WVZGZkdaMUtwTVlGQS0t" does not exist. The application was either ended by a timeout or an error occurred, which was entered into the trace log. See SAP Notes 937697 and 948490
     at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.ControllerCollector.getControllerByPageId(ControllerCollector.java:178)
     at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:315)....
Weirdly enough, for all reports generated from WAD 3.x, this problem does not exist, multiple vusers can run concurrently.
Anyone can help or give some hint? This problem has been torturing me long. Thanks in advance.

kprasanna,
SAP BI comes with its own HTTP Cache and web templates are stored in the HTTP cache of the server and especially when you change a template and execute it again - the previous version stored in the HTTP cache is being retreived.
To overcome this - go to TCODE SMICM
in the menu bar --> Goto --> HTTP Server Cache -> Invalidate -> Global in system
Once this is done your changes will start reflecting....
Arun

Problem with WAD Template

Hi All,
I have 2 queries Ex: QAS1 and QAS2.Both have same selection parameters expect Date in both queries.QAS1 is having date (RO1) and QAS2 is having (ROS1) date parameters. I have a common WAD 7.0 template for both these queries and both queries are merged. So when i execte the web tepmplate i will enter either RO1 Date or ROS1 date and the web template should display the query/report output based on date entered.
Can i use web items or Script Item control or any javascript for this issue?Please provide step by step procedure if there is any solution accordingly.
Is there any better solution for this approach?
Regards..
Edited by: sunanda G on Aug 16, 2011 3:41 PM

Hi,
Thanks for your reply. I tried many ways in the web template but issue still not yet solved. That is I have selected 2 Data providers for 2 Reports in the web template, But same reports output except date fields. Those 2 date fields also displayed in selection variables, when I run the template in WEB. So, When I select one date variable the corresponding Data Provider should fill the analysis item table in web template. If I select 2nd Date field variable in the query selection the corresponding Data provider-2 should fill the same analysis item table in same web template.
Actually these templates are available in 3.5 WAD. But that one with java scripts. Now user want to upgrade same templates in WAD 7.0. I also tried using with java script accordingly 3.5 WAD Template. But no use.
Please suggest me.... what is best procedure we can use for issue?
Thanks & Regards,
Sunanda

Problem in WAD: export to PDF all the tab panels of a TabPage

Hi all,
I have a problem with WAD and export to PDF.
My template (schema):
Group -->
Container Barraher --> Button Group
Container Form --> Tab Pages -->
TabPanel1 --> Container1 --> Analysis1
TabPanel2 --> Container2 --> Analysis2
TabPanel3 --> Container3 --> Analysis3
My problem:
The button exports only the Analysis we are seeing (the TabPanel which is opened) but I would want the button exports the three Analysis. Is it possible?
At the Button Group --> Command Export --> Data Binding --> Web Items:
Analysis1
Analysis2
Analysis3
Thanks a lot in advance!

Hi,
Can you remove the Data Bindings and see if you use the Default if PDF is working ?.
Another way also might be is to save the Same Template with a new Name, then Keep only the Data Providers and the Analysis Grid.
Back on Main Template in the Button Group use this new Template as a Print Template.
Hope this helps.
Datta.

Problem with Variable screen in WAD

Hi ,
I have a problem with variable screen in WAD , in the varable seen it is displaying only Key , it is not giving any description , but in BEX is is displaying both Key and Description , can any only have an idea why is this happening . this is occuring only for one variable , rest are working fine .
Thanks,
Abraham

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Problem with inverted commas in texts in WAD

Hi all,
I've a problem with description texts in WAD. In a graph where one of the columns have the description, let's say something like ' bla"bla ' (in Hebrew we've texts with inverted commas in the middle of the word) and when I point with my mouse on the point to see the value in numbers the text is cut. let's say 'bla"bla' had 15 value it wouldn't show it, but it would show 'bla'. if the text is ' bla ' with value 18, it shows ' bla 18' .
How can i solve it?
thank you,
Yoav.

Hi Abraham,
thsi could be a problem from the specisic setting of the infocube. Please check the BEx Settings from the infocube. You can find them by the following steps:
- search for the infocube
- doubleclick on the infocube
- choose an specific infoobjekt
- right mousebutton and click "specific dataprovider settings"
- check if the right entries are set
Hope this will help.
André

Problem with Information button in WAD

Dear Mates,
I have a problem with Information button in WAD template.
I have two queries in web template. those two queries are in two tabs( i used Tabstrip ) respectively.
if i press first tab it shows query1 and if i press second tab it shows query2 absolutely.
problem
when i am in first tab, if i click information it will show information about query1, but when i am in second tab,
if i click information it will show information about query1 only..
i need it to show information about second tab.
Please help. Its urgent. Full Reward points will be given.
Thanks in advance.
Regards,
Ranganath

check out this link
http://www.mhprofessional.com/downloads/products/0071640266/0071640266_chap01.pdf

HT1199 cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can anyone help. Cheers Wade Johnson

Cannot play songs, the following comes up - Itunes has detected a problem with your audio configuration.
Audio/Video playback may not operate properly.
Cheers
Wade Lawrence

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Problem with variable in wad

Hello Guru's
i had a problem in WAD. we have report in which i have to create a variable for positing date so that the end user can give posting date and execute the report for that particular week. if i execute the BEX report it's working fine.where as if i execute the report in wad. i couldn't see the variable for posting date. it gives output directly. may i know what the problem.
Thanks
rad

For calling up the variable screen, in your template you can use
<SAP_BW_URL CMD='PROCESS_VARIABLES' SUBCMD='VARIABLE_SCREEN'>
This command allows you to call up the variables screen again for the current page.
Also, as Ajay mentioned you have to change the variable options to 'Mandatory: Initial value not allowed'.
Hope this helps.
Regards
Hari

WAD - Problems with Filter

Hi Friends,
I have got the feedback from our user about new web applications implemented with WAD 7.x.
Almost everybody does not like new filters.
That is why I want to ask if it is possible to change layout of the filter or use somehow the old ones (I think in BEx Analyzer it is possible to change layout of the filters).
Two things are particularly uncomfortable:
1. If we want to go into the filter, at first we have to choose "edi"t (really unnecessery), In the old version it was better.
2.I can not find possibility in filter inside to "Select All" position. Do you know maybe some workaround.
Regards
Erwin

Dear Erwin,
This "Edit" option will allow you to change the values of Characteristic or KF.Either you can select the value for a characteristic through Dropdown or select "Edit"->Selector dialog->Select the values.
And Selecting all the values in the values in the selector dialog is not possible with Web report,You have to select one by one.
As you said,this is not user friendly.
Rgds,
Murali

Problem with hierarchy variable while displaying query in Portal

Hi,
I came up with an problem with a query in the portal. The problem is :
I have one query which is displayed in the portal. The Query has hierarchial selection criteria. I am executing the same query using analyzer. Its taking the variable from the selection and displaying it on the analyzer. I have used the option to " display the query on web " from the BEX query designer. From there its opening and displaying the results with the given selection criteria.
Where as when i open the query seperately in portal, its not displaying the results.
I came to know from one of my colleague that the porblem is with the Web item and the hierarchial variable declared in WAD was different from the variable declared in the BEX Query designer.
I never Worked with WAD. I tried finding out the variable definition. But i was unable to find out where the Hierarchial variable was defined.
Please help me out regarding the same.

The problem is sovled.
Poornima.

TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Programming Web Item. Problem with URL creating

Hi,
I am trying to programm a own Web Item.
I derived from the class CL_RSR_WWW_ITEM_VIEW.
Everything is worken fine. I just have a problem with
the creation of links.
In the WAD there is the very nice way of using SAP BW URLs
like:
<SAP_BW_URL cmd="PROCESS_HELP_WINDOW"
help_service="ZPRINTING"
item="TABLE_1"
suppress_repetition_texts=""
P_PREVIEW_MODE=" ">
Is the a method or something similar to do the same with abap?
Greetings
Mike

I found out mayself!
You just have to use the object CL_RSR_PARAMETER.
There you can add parameters.
Then use the method get_url of the object CL_RSR_WWW_PAGE to make a URL string out of it.
Mike

Problems with H2 digital interface

I have a SoomH2, and a macbook, os 10.5.8. When I plug into the USB, to use as a mike for garage band, the sound going into the computer is all distorted and shows a solid thick wad of sound on the garage band recording level, despite turning down the gain on the H2 and/or the macbook. There is a backround of static, even if there is no sound going in. I have had the same problem with the power off, running off of the USB, with batteries and turned on, and with the external power. An old posting said to put a USB powered hub in between, but if I am already plugged in, with the H2 on, that should not be necessary.
When new, the H2 worked, but developed this problem intermittently, and now does it all the time. Put a new software version into the H2, no difference.
Used by itself, the H2 is fine, and you can download into garage band. The macbook internal mike does not have any problems, and goes into garage band just fine, but is not a high quality mike for music. Has anyone else had a problem like this, and how did you resolve it. Thanks for any help.

Hi Klaus
In your wsdl file the soap address tag (given below)
<soap:address location="http://xxxxxxxx:8000/XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out&version=3.0&Sender.Service=Foo_SOAP_Service&Interface=urn%3A%2F%2Fporeceive.xi.pse.siemens.com%5Efoo_out_sync" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"/>
is to be edited as
<soap:address location="http://xxxxxxxx:50000//XISOAPAdapter/MessageServlet?channel=:Foo_SOAP_Service:SOAP_Foo_out" />
because the soap address format should be like :
http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
For more information :
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
Hope this will be helpful.
Regards
Suraj

Problem with WAD 3.5

Similar Messages

Maybe you are looking for