Problem with your Xperia Z1 and Service Centre NOT Helpful

Hi, 
If you are from India and If you are an Xperia Z1 owner, and facing problems with your phone and the service centre and customer care totally unhelpful, Contact me. We are starting a self help forum very soon. 
If you feel you have been cheated by Sony, Contact me. Let us sort it out.

thereis already a self-help forum
two, actually
the one is this one
the other is xda-developers, who probably will tell you to install cyanogenmod, go into recovery and delete dalvik cache three times

Similar Messages

  • I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

    I have migrated from London to New Delhi and i am facing some problem with my iPhone 4s and i am not able to setup a repair .My phone is in under warranty too. Can anyone tell whats the matter?

    The warranty is NOT international. You must take it back to the country of origin if it needs repair. The E.U. is considered a single country for warranty purposes.

  • I am having problem with my notifications bar and control centre bar. It doesn't work with sliding my fingers on the screen and when I restart the phone it works properly  but again after few days the problem persist? My phone is an iphone6 8.1.3

    notification bar and control centre not working by sliding on the screen and when u restart it works fine for 4-5 days then again the problem persists

    First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting.
    If this does not help, set it up as new device, explained here:
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
    iPhone - Contact Support - Apple Support

  • Problems with re-grouping - subtotals and pagebreaks do not work

    I'm trying to create a report with all of my grouping in the template as opposed to the data definition. I've copied a simplified version of my code and xml below.
    I'm having two issues:
    1. The pagebreaks are not working. For every change in pagebreak_seg, second_seg, or third_seg there should be a pagebreak.
    2. The subtotalling isn't working. At each grouping level, I'm using sum(current-group()/...) to capture a subtotal at the new level. It worked the first 3 times (for Account_seg, Cat3 and Third_Seg, but stopped working at Second_seg. The second_seg keeps appearing after each Third Seg and has the same values rather than appearing at the end of the final Third Seg that falls within the Second_seg. Is there a limit to how many times I can do this, or have I got an error in here somewhere.
    I can email the xml and the template if that would be more helpful.
    Thanks very much for your help.
    What I'm expecting to see.
    1st Page
    entity: 001 My Department
    program: 72020 Financial Services
    organization: 160013 Human Resource Functions
    account 540300 desc and subtotals
    Subtotal these amounts under category of Travel
    account 522200 desc and subtotals
    Subtotal these amounts under category of Supplies and Services
    Subtotal for Human Resource Functions
    pagebreak
    2nd Page
    entity: 001 My Department
    program: 72020 Financial Services
    organization: 160018 Org 1
    account 5254000 desc and subototals
    Subtotal these amounts under category of Supplies and Services
    Subtotal for Org 1
    Grand Total for Financial services
    Grand total for My department
    --excerpt from template
    <?start:body?>
    ##<?for-each:XXFIN_PSBE2_XML?>
    ####<?for-each:LIST_G_HEADER_PAGE?>
    ######<?H_TITLE?>
    ####<?end for-each?><?PageBreak?>
    ####<?for-each-group:G_REPORT;PAGEBREAK_SEG?>
    ######<?for-each-group:current-group();./SECOND_SEG?>
    ########<?for-each-group:current-group();THIRD_SEG?>
    ##########<?SEG_1_HEADER?>
    ##########<?PAGEBREAK_SEG?>
    ##########<?PAGEBREAK_DESC?>
    ############<?for-each-group:current-group();CAT3?>
    ##############<?for-each-group:current-group();ACCOUNT_SEG?>
    ################<?ACCOUNT_SEG?>
    ################<?ACCOUNT_DESC?>
    ################<?sum (current-group()/APRIL)?>
    ################<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
    ##############<?end for-each-group?>--account seg
    ##############<?CAT3_DESC?>
    ##############<?sum (current-group()/APRIL)?>
    ##############<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
    ############<?end for-each-group?>--cat3
    ##########<?THIRD_DESC?>
    ##########<?sum (current-group()/APRIL)?>
    ##########<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
    ##########<?split-by-page-break?>
    ########<?end for-each-group?>--third
    ########<?SECOND_DESC?>
    ########<?sum (current-group()/APRIL)?>
    ########<?sum (current-group()/VARIANCE_ACTUAL_FROM)?>
    ########<?split-by-page-break?>
    ######<?end for-each-group?>--second
    ######<?split-by-page-break?>
    ####<?end for-each-group?>--pagebreak
    ##<?end for-each?> XXFIN_PSBE2_XML
    <?end body?>
    --simplified xml
    <?xml version="1.0" encoding="UTF-8"?>
    <XXFIN_PSBE2_XML>
    <p_actuals_year>2006-07</p_actuals_year>......
    <LIST_G_HEADER_PAGE>
    <G_HEADER_PAGE>
    <H_RECIPIENT_NAME/>
    <H_TITLE>Monthly Account Detail Report</H_TITLE>
    <H_USERNAME>DOREY</H_USERNAME>
    <F_FOOTER>Test.</F_FOOTER>
    </G_HEADER_PAGE>
    </LIST_G_HEADER_PAGE>
    <LIST_G_WORKSHEET1_NAME>
    <G_WORKSHEET1_NAME>
    <WORKSHEET1_NAME>001E1-6 Department - 8272</WORKSHEET1_NAME>
    </G_WORKSHEET1_NAME>
    </LIST_G_WORKSHEET1_NAME>
    <LIST_G_WORKSHEET2_NAME>
    </LIST_G_WORKSHEET2_NAME>
    <LIST_G_REPORT>
    <G_REPORT>
    <REPORT/>
    <PERIOD_NUMBER>12</PERIOD_NUMBER>
    <SUM_SALARY_IND>N</SUM_SALARY_IND>
    <ENTITY_SEG>001</ENTITY_SEG>
    <ENTITY_DESC>Health</ENTITY_DESC>
    <SEG_1_HEADER>Entity:</SEG_1_HEADER>
    <SEG_2_HEADER>Program:</SEG_2_HEADER>
    <SEG_3_HEADER>Organization:</SEG_3_HEADER>
    <PAGEBREAK_SEG>001</PAGEBREAK_SEG>
    <PAGEBREAK_DESC>My Department</PAGEBREAK_DESC>
    <SECOND_SEG>72020</SECOND_SEG>
    <SECOND_DESC>Financial Services</SECOND_DESC>
    <THIRD_SEG>160013</THIRD_SEG>
    <THIRD_DESC>Human Resource Functions</THIRD_DESC>
    <CAT2>AC5100</CAT2>
    <CAT2_DESC>Goods and Services</CAT2_DESC>
    <CAT3>F50015</CAT3>
    <CAT3_DESC>Travel</CAT3_DESC>
    <ACCOUNT_PRECISION>54</ACCOUNT_PRECISION>
    <ACCOUNT_SEG>540300</ACCOUNT_SEG>
    <ACCOUNT_DESC>Accommodations &amp; Incidentals - In Province</ACCOUNT_DESC>
    <ACCOUNT_FUTURE_DESC>Accommodations &amp; Incidentals - In Province</ACCOUNT_FUTURE_DESC>
    <FUTURE/>
    <FUTURE_DESC/>
    <CURRENT_FORECAST_COLUMN>0</CURRENT_FORECAST_COLUMN>
    <APRIL>0</APRIL>
    <MAY>53</MAY>
    <JUNE>-53</JUNE>
    <JULY>0</JULY>
    <AUGUST>0</AUGUST>
    <SEPTEMBER>0</SEPTEMBER>
    <OCTOBER>0</OCTOBER>
    <NOVEMBER>0</NOVEMBER>
    <DECEMBER>0</DECEMBER>
    <JANUARY>0</JANUARY>
    <FEBRUARY>0</FEBRUARY>
    <MARCH>0</MARCH>
    <YTD_ACTUALS>0</YTD_ACTUALS>
    <BUDGET_YEAR_COLUMN>0</BUDGET_YEAR_COLUMN>
    <VARIANCE_ACTUAL_FROM>0</VARIANCE_ACTUAL_FROM>
    <PERCENT_SPENT_OF/>
    </G_REPORT>
    <G_REPORT>
    <REPORT/>
    <PERIOD_NUMBER>12</PERIOD_NUMBER>
    <SUM_SALARY_IND>N</SUM_SALARY_IND>
    <ENTITY_SEG>001</ENTITY_SEG>
    <ENTITY_DESC>Health</ENTITY_DESC>
    <SEG_1_HEADER>Entity:</SEG_1_HEADER>
    <SEG_2_HEADER>Program:</SEG_2_HEADER>
    <SEG_3_HEADER>Organization:</SEG_3_HEADER>
    <PAGEBREAK_SEG>001</PAGEBREAK_SEG>
    <PAGEBREAK_DESC>My Department</PAGEBREAK_DESC>
    <SECOND_SEG>72020</SECOND_SEG>
    <SECOND_DESC>Financial Services</SECOND_DESC>
    <THIRD_SEG>160013</THIRD_SEG>
    <THIRD_DESC>Human Resource Functions</THIRD_DESC>
    <CAT2>AC5100</CAT2>
    <CAT2_DESC>Goods and Services</CAT2_DESC>
    <CAT3>F50035</CAT3>
    <CAT3_DESC>Supplies and Services</CAT3_DESC>
    <ACCOUNT_PRECISION>52</ACCOUNT_PRECISION>
    <ACCOUNT_SEG>522200</ACCOUNT_SEG>
    <ACCOUNT_DESC>Rent of Photocopiers</ACCOUNT_DESC>
    <ACCOUNT_FUTURE_DESC>Rent of Photocopiers</ACCOUNT_FUTURE_DESC>
    <FUTURE/>
    <FUTURE_DESC/>
    <CURRENT_FORECAST_COLUMN>0</CURRENT_FORECAST_COLUMN>
    <APRIL>0</APRIL>
    <MAY>0</MAY>
    <JUNE>0</JUNE>
    <JULY>0</JULY>
    <AUGUST>0</AUGUST>
    <SEPTEMBER>25</SEPTEMBER>
    <OCTOBER>-25</OCTOBER>
    <NOVEMBER>0</NOVEMBER>
    <DECEMBER>0</DECEMBER>
    <JANUARY>0</JANUARY>
    <FEBRUARY>0</FEBRUARY>
    <MARCH>0</MARCH>
    <YTD_ACTUALS>0</YTD_ACTUALS>
    <BUDGET_YEAR_COLUMN>0</BUDGET_YEAR_COLUMN>
    <VARIANCE_ACTUAL_FROM>0</VARIANCE_ACTUAL_FROM>
    <PERCENT_SPENT_OF/>
    </G_REPORT>
    <G_REPORT>
    <REPORT/>
    <PERIOD_NUMBER>12</PERIOD_NUMBER>
    <SUM_SALARY_IND>N</SUM_SALARY_IND>
    <ENTITY_SEG>001</ENTITY_SEG>
    <ENTITY_DESC>Health</ENTITY_DESC>
    <SEG_1_HEADER>Entity:</SEG_1_HEADER>
    <SEG_2_HEADER>Program:</SEG_2_HEADER>
    <SEG_3_HEADER>Organization:</SEG_3_HEADER>
    <PAGEBREAK_SEG>001</PAGEBREAK_SEG>
    <PAGEBREAK_DESC>My Department</PAGEBREAK_DESC>
    <SECOND_SEG>72020</SECOND_SEG>
    <SECOND_DESC>Financial Services</SECOND_DESC>
    <THIRD_SEG>160118</THIRD_SEG>
    <THIRD_DESC>Org 1</THIRD_DESC>
    <CAT2>AC5100</CAT2>
    <CAT2_DESC>Goods and Services</CAT2_DESC>
    <CAT3>F50035</CAT3>
    <CAT3_DESC>Supplies and Services</CAT3_DESC>
    <ACCOUNT_PRECISION>52</ACCOUNT_PRECISION>
    <ACCOUNT_SEG>525400</ACCOUNT_SEG>
    <ACCOUNT_DESC>General -Telephone</ACCOUNT_DESC>
    <ACCOUNT_FUTURE_DESC>General -Telephone</ACCOUNT_FUTURE_DESC>
    <FUTURE/>
    <FUTURE_DESC/>
    <CURRENT_FORECAST_COLUMN>84</CURRENT_FORECAST_COLUMN>
    <APRIL>0</APRIL>
    <MAY>0</MAY>
    <JUNE>0</JUNE>
    <JULY>0</JULY>
    <AUGUST>0</AUGUST>
    <SEPTEMBER>0</SEPTEMBER>
    <OCTOBER>0</OCTOBER>
    <NOVEMBER>0</NOVEMBER>
    <DECEMBER>84</DECEMBER>
    <JANUARY>0</JANUARY>
    <FEBRUARY>0</FEBRUARY>
    <MARCH>0</MARCH>
    <YTD_ACTUALS>84</YTD_ACTUALS>
    <BUDGET_YEAR_COLUMN>0</BUDGET_YEAR_COLUMN>
    <VARIANCE_ACTUAL_FROM>0</VARIANCE_ACTUAL_FROM>
    <PERCENT_SPENT_OF>1</PERCENT_SPENT_OF>
    </G_REPORT>
    </LIST_G_REPORT>
    </XXFIN_PSBE2_XML>

    Additional info on the grouping problem:
    I tried removing the third_seg group and the second_seg group started working properly. I then deleted the second_seg group and the pagebreak_seg started working. So as long as I have only one level of grouping below cat3 the output is correct. Unfortunately I need those additional levels, so if anyone has any suggestions, I would really appreciate it.
    Alternately if someone knows of a sample with mutliple levels of grouping, I would appreciate a link. There was a link on the the BI Blog but it doesn't work any longer.
    Thanks for your help.

  • Problem with microphone, Audigy 2, and a Dell (not the same problem as the 8 million other topi

    Hello,?I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones). So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before).
    So I reformatted again and am trying to figure out what order I installed and uninstalled etc.
    So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's? What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/

    HalberdBlue wrote:
    Hello,I recently reformatted my hard dri've and had to reinstall drivers for nearly everything, etc. I have a Dell Dimension 4600, and an Audigy 2 sound card. My microphone worked fine before the reformat and then it was broken. Its not that it wasn't picking up my voice (I have read that the typical problem with Dell computers and microphones was that you had to almost scream into the microphone to get it to hear anything). When I tried to record something, it would record what was coming out of my speakers, and not what I was saying (no matter how hard I yelled). So, when I was playing Counterstrike, everybody heard my gun shooting and grenades exploding etc. instead of my voice (which was what was coming out of my headphones).So I downloaded the ISO available here and through some complicated, random process of uninstalling and reinstalling the various sound drivers I found on the internet, I managed to get my microphone to work perfectly. I changed some settings before I went to bed on Sunday night, and when I tried to use my microphone on Monday it didn't work again (and I had the same problem as before). So I reformatted again and am trying to figure out what order I installed and uninstalled etc.So my question is, has anyone else has this specific problem (when attempting to record it records what comes out of the speakers/headphones and not what is being said into the microphone) and remembers how to fix it's What I did was really bizarre, something like downloading Dell drivers, installing them, uninstalling them, downloading Creative drivers, installing them, installing Dell drivers on top of them, uninstalling both, downloading the ISO, reinstall the Creative drivers, install the files from the ISO, or something like that. Obviously that includes a lot more steps than are needed and because part 3 of the ISO is currently down (I don't have a CD burner so had to redownload the whole thing (I just used a CD emulator last time)) I can't work on it right now :/
    Actually, it's not a problem but a setting. On surround mixer .rec source setting --> when you set it to What U Hear everything you hear becomes recorded --> for microphone recording set it to microphone (also set "monitoring while recording" on/off).
    jutapa

  • HT3702 Dear Customer Support... I have some problem with In-App Purchases and i can not Report a Problem  in Itune

    Dear Customer
    I has one Iphone and I have some problem with In-App Purcases Because my sister purchased In-app when she play
    and i can not report a problem in Itune,
    I inadvertently purchased all of this application in Order Number: MH*****4H5  Date: 04/09/12 ,Order Total $36.81
    So i can't use App store on my phone Because have problem Billing info and i dont want this order, I inadvertently purcased all of this application
    Hopefully I can ge help from you as well.
    Best Regards
    <Edited By Host>

    These are user-to-user forums, you are not talking to Apple here. All purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HT201210 Updating my iphone4 from 7.0.3 to 7.0.4 over wifi.......after screen says " connect to iTunes"......after connecting to iTunes PC says "restore"......after restoring PC  says "There is a problem with your iphone please visit Service Answer Centre

    After numerous call with Apple and trying loads of restore, recovery, antivirus off, latest iTunes downloaded....etc etc......now my iphone say "Device Unknown"
    The phone worked perfectly until this update.....no way am I paying for a repair for a fault resultant from a firmware update
    Anyone had the same issue?

    I am having the same issue! I was warned not to upgrade to 7.0.1, but no warnings about 7.0.4. What a disaster! Once I get my iPhone working again, I will NEVER upgrade it again! Thanks, Apple! I am over 100 miles from the nearest Apple Store!

  • Problems With Your MuVo N200?? I Can Help... Formatting May Not Be Eno

    <FONT color=#330000 size=>After two months of using my MuVo Micro N200, I experienced a problem where it would shut-off at random times. Sometimes when i turn it on, the Logo shows up then shuts off. Well, if your MuVo has this problem and you tried formatting but it still came back (like mine)... try this:
    <FONT color=#330000 size=>
    <FONT color=#330000 size=>Step One:
    <FONT color=#330000 size=> Format your Player (save it somewhere so you can put it back)</LI>
    <FONT color=#330000> Go to this website www.nomadworld.com/downloads/firmware and look for the MuVo Micro N200 button (or whatever your system is)</LI>
    Download (save somewhere like Desktop)</LI>
    Connect your computer and system</LI>
    Follow instructions</LI>
    Reload Files</LI>
    ENJOY!!!</LI>
    I went looking over here and it took me quite a while to realize what a FIRMWARE was but then when I got what it was, I felt so proud that I wanted to just share the instructions with everyone.
    I am just saving the trouble of you going all over the place, but if it doesn't work, maybe you need to talk to customer support
    Enjoy,
    IHeartMyMuVo
    <FONT color=#330000 size=>

    HI. I get a hiss too. It seems to happen only when the light is on. something about the light power and the phone circuts, I suppose. Also happens anytime the light goes on, right? I shut off the light to prolong battery so it doesn't bother me any. Do you need the light?
    K

  • Automatic page updates causing problems with your screen reader

    i want to know whats going on with this Automatic page updates causing problems with your screen reader and yahoo does not work and in order for me to even email you for this question i have to use internet exp I have found this complaint many times in the forum but with no real answer how to fix the dang thing will you please tell us what your doing about this problem and or do we have to go back to using internet exp there are more sights than yahoo that no longer work with mozilla please let us no what is bieng done about this problem if any thing
    == URL of affected sites ==
    http://
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SearchToolbar 1.1; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; eMusic DLM/4; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; InfoPath.3; .NET4.0C; AskTB5.8)

    Try Refresh Blocker: https://addons.mozilla.org/firefox/addon/992

  • This message recently popped up on my PC - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." What does this mean and how to fix ??

    Hi Everyone - recently this message popped up on my PC, when I was trying to import cd's into the iTunes library and then onto my iPod - "iTunes has detected a problem with your audio configuration. Audio/video playback may not operate properly." Can anyone tell me what this means and how to fix it ?? I am not fantastically PC savvy, so any information explained fully and all steps to follow to get my music playing again would be great !! Thanks, SC

    Hi B, thanks so much for helping me troubleshoot !!
    Ok, so when I went in to check the Audio tab of the Sounds and Audio Device Properties, I found the following:-
    * Sound Playback Default Device = No Playback Devices.
    * Sound Recording Default Device = No Playback Devices.
    * MIDI Music Playback Default Device = No MIDI Playback Devices.
    All text in this drop-down box were light grey, and therefore unable to be selected or altered.
    I also tried playing a cd through Windows Media player, to see if I could get sound a different way. When I put the cd in and clicked on Play, the following message appeared, "Windows Media Player cannot play the file because there is a problem with your sound device. There may not be a sound device installed on your PC, it may be in use by another program, or it may not be functoning properly."
    Any ideas ? I had sound previously, but then a work colleague re-built the PC to add more space to the hard drive, and since then, no sound. I know this may now not just be an iTunes issue, but I would appreciate any assistance you can offer.
    Thanks again,
    Shell

  • "There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. "

    My problem is after i did a restore on my 32gb ipod touch i now get a error on itunes that says "There is a problem with your device,We're sorry the device you connected may be damaged and cannot be activated for service. " Please help

    In the ipad discussion forums there apparently is a HUGE problem with people not being able to update to ios 4.3.3, it apparently locks up their devices and they are also getting the error "there is a problem with your device".... some are reporting the same problem with their ipod touch as well... it looks like it's a global issue
    The forum is in the ipad section under the title of "There is a problem with your device".
    I have dodged a bullet on this one since i have not updated my ipod's or ipad in the last couple of days.... i will hold off syncing to itunes until this issue is fixed... good luck, and spread the word if you can to get apple to listen

  • HT201263 What will i do?screenshot There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, cli

    What will i do? ITune screenshot is as follows >
    There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

    Do what it said to do.
    "Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. "

  • TS1814 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

    There is a problem with your iPhone.
    Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
    To find your nearest Apple Store, click here.
    Please help me i can aktivate my phone imei 012423006333181.

    There is a problem with your iPhone.
    Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
    To find your nearest Apple Store
    no imei also

  • Has anyone ever had a problem with your iphone working outside your home but not inside. The internet works fine in and outside of the house

    Has anyone had problems with your iphone working outside of the house, but not inside? Cannot make or receive calls, nor can I send or receive any text messages. This is something that just happened out of nowhere. Can I get some help please?

    Did you used to have service and now suddenly you don't?
    This happened to me a few years back, and several other iPhone users in my neighborhood, and after a while on the phone with AT&T they figured out that a technician had recently adjusted the receiver/sender on the tower and it was slightly off. They sent them back up and I actually had a better signal after than I did before it went out.
    I would call AT&T and explain the issue you are having and see if they can fix it.
    If you never had service there then like wjosten said it's probably just a bad zone.
    Hope you get it sussed out.
    -PM

  • Hey my iphone was working perfectly and then i sent it to check up and it came back with the itunes icon and data cable on it. so i tried plugging it in the computer and a message on itunes came up saying theres a problem with your phone. HELP PLEASE!!

    hey my iphone was working perfectly and then i sent it to check up and it came back with the itunes icon and data cable on it. so i tried plugging it in the computer and a message on itunes came up saying theres a problem with your phone and it may be damaged and cannot be activated. HELP PLEASE!!

    Why on earth send a Worning phone for service sounds like cutting up a Heaththy PET to see how it looks on the inside

Maybe you are looking for

  • Is there a way to change the icon associated with icloud account?

    Is there a way to change the icon associated with my iCloud account? It's currently a rose and i do not like it.

  • Oracle i Supplier Portal Workflows - Supplier Change Order Workflow

    Hi Friends, Oracle iSupplier Portal uses the following workflows: ■ Supplier Change Order Workflow ■ Update Capacity Workflow ■ Order Modifiers Workflow ■ Advance Shipment Notice (ASN) Workflow ■ Purchase Order Acknowledgement (handled by PO Approval

  • JDev 1013, Webservice as Data Control in JSF page returns error

    Hello, For a client we are starting a project with Java Server Faces in combination with web services. In order to do some testing we created a web service in PLSQL (with a empno input field and a record output) and deployed this web service on an OC

  • Seeburger Parameters "DestDelimiter"

    Hi dear Experts I have an scenario Outbound I'm generating and EDI File and I use BIC Seeburger. The scenario works fine . However I have a new requeriment I need to pass an hexadecimal(1A) value in the parameter destDelimiter in the Terminator. My a

  • Need Help With The 'this.closeDoc' Command

    Is there a way to save (or is there a work around available) that can be used to save data in a pdf when using the 'this.closeDoc()' command? The 'disclosed' property of the called PDF (in this case: PFSL-18. 06.96.pdf) is set to 'true'. What I want


HashFlare