Problems A88X-G45 after Bios update

Dear,
Recently acquired a motherboard MSI G45-A88X and everything worked properly until I perform the update of Bios (via M-Flash).
So after this, the computer can not start more (does not pass the test of Bios - POST). Ie, Not I can no more access the setup bios.
Furthermore, since all components despluguei, thereby connecting one go to a (processor, memory, etc.). Soon after the memory test, debug LED schism in showing the value "70" (Late South Bridge initialization, as the manual).
Also, I inform you that already realized the cleaning of the CMOS (via the button and also the jumpers located on the board), without thereby be successful.
So seriously suspect that I damaged the Bios and therefore the card should be sent to the seller for the same be repaired or even replaced (it is still under warranty).
If someone can offer some attempt at a solution to my problem (I believe it is difficult, given the facts presented), I thank in advance.

Hi,
Since this motherboard doesn't have dual BIOS, there is no way to recover it. And as you've tried clearing CMOS, which failed, you're left with sending it back to the shop you got it from.

Similar Messages

  • Problem in booting after bios update

    Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

    see help 8....
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Tecra S1 - problems with touchpad after BIOS-update to 2.50

    Hi,
    after the BIOS-update to version 2.5, the touchpad doesn't do anything. Starting in the docking station, the optional PS2 mouse works without any problem. Starting undocked, the touchpad doesn't work anymore. Normally - before update - the touchpad started it's work immediately after undocked booting.
    What can I do to reactivate the touchpad???
    Wanky

    Hi Jeffrey,
    thank you for your tips!
    First I tried the hotkeys. All hotkey combinations work successful - except for the touchpad key F9...
    After reinstallation of the touchpad driver, undocking the Tecra and disconnecting the USB-mouse I started with the Toshiba HWSetup tool to switch the functionality of the pointing devices to simultaneously. After installing the touchpad driver and repeated booting of the Tecra -> no progress.
    After all examinations, no step further... I'm tired...
    If you have another ideas, please let me know.
    Kind regards,
    Uwe

  • Yoga 2 Pro Went DEAD After BIOS Update

    Had a horrible experience .. with good ending ... when upgrading Bios for my Yoga 2 Pro. So I'd like to share with others. I bought my Yoga 2 Pro last June (Man 3/22/14) and love it! But, it had problem restarting automatically after Windows Update. At least 3 times (That I can recall. Did not use it briefly from June 30 - July 22), the screen reminding user not to shutdown after Windows the update would stay on until I manually powered it down and restarted it. Last July 23, it did again after Windows Update. Searched Lenovo web-site and found a Bios Update for Yoga 2 Pro (Win 8.1 64-bit). Downloaded the new Bios (dated July 11, 2014) and went through the instruction striclty. First of, the screen responses were not at all as detailed in the instruction. So, the instruction is not very good.  Received 2 warnings: Make sure the laptop is connected to the charger during the procedure, and the bios is for Yoga 2 Pro ONLY do not install it on any other models. As part fo the procedure, the laptop switched to a Bios Utility program. Again received the aforementioned warnings. Update progress was shown on the screen. All of a sudden, then screen went blank and the keyboard stayed lit. Waited for about 30 minutes. Still the same. Press and held the power button down (not sure for how long)  ... nothing!   Just no response from the latop.  Called Tech support. She (the tech support lady) said that ... it is not recommended for user to go through the BIOS upgrade! What?  Then why post it on Lenovo.com? She also said that I should not have downloaded software from the internet and upgrade, especially for BIOS. Well, I told her that I did not download the program from ANY web-site, I downloaded it from LENOVO.com. She said further that looks like the BIOS update had damaged my mother-board, there is a problem with Win 8 & 8.1, and because it was my own doing ... the damage would not be covered by the warranty!  Considering the circumstance, Lenovo would waiver the initial $99 fee to assess the damage, but I would have to pay for any repair costs. In any case, I was so fumed at Lenove Tech Support responses that I hung up. close my laptop and put it aside. Almost 24 hours later, when the battery drained completely, I connected the laptop to the charger, press the power button to turn it on ... and ... to my surprise, the laptop booted and everything came back normal! The last (7/25) auto restart seemed to go well. Not sure if the auto restart problem is fixed with the new BIOS, but it seems to be. Time will tell.

    Thank you for your posting.  I searched the net when I ran into the problem, but could not find any help.  Obviously, my search was not exhaustive. I was trying to make the following:    a.  Lenov should be more specific in their BIOS update instruction.  Their instruction was ... far ... far from reality.      b.  Lenovo tech assistance was ... not much help.  After listening to the description of my prolem, the tech lady immediately said that the operation must have damaged the mother-board, and that the operation is not ... recommended.  No guidance on draining the battery a or how to restart the machine, etc...  What I received was confusing that caused more panic!   As a note, I had done BIOS upgrade on DELL PC/laptop before w/o any problem.  I fully understand the implication of a BIOS upgrade, but trusted that manufacturer fully tested whatever that they post in their web-site.  Oh well, live ... and learn!  All in all, the Yoga 2 Pro is a great machine and I love it!  Hope that anyone who runs into the same problem will be able to get the needed help in time! Cheers, 

  • I can't activate windows 8.1 pre-instal​led on my Toshiba E45-B4200 after BIOS Update

    I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
    Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
    I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
    Now I can`t update Windows, Office 2013, and so on. 
    I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
    I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

    It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
    - Peter

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

  • HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

    After bios update my desktop runs so painfully slow it is unworkable.  Disk drive seems to be constantly hammered by processes that don't appear on task manager.  Running 64 bit windows 7 (sp1).  Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support.  Ideally would like to get previous version of bios as machine was running well before update. 

    I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
    the BIODHD-8 error code means your harddrive is failing and must be replaced.
    Back up everything that you possibly can before it fails and no longer boots up into Windows .
    is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty) 
    HP notebook warranty status check website
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Satellite L650-1KR PSK1JE - dead after BIOS update

    As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
    I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
    My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
    Of course my warranty is already over... :-(
    Please help!
    Thank you in advance...
    lichtimc

    Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
    In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

  • H97M-G43 RAID0 Config Lost After Bios Update

    All bios is buged lost RAID0 config after bios update(no know for other RAID modes)
    Firmware Versions with problem:
    2.3
    2.4
    2.5
    2.6
    for 2.0/2.1/2.2 Bios versions no know if have this problem.
    the problem is serious because in each update you lose RAID Config. I hope to fix it quickly

      Of course you lose volumes if you change to AHCI, reboot and back to RAID at least when you have Windows 8/8.1. So now I am slightly confused where the problem is..
    And since we gain experience through time, yes you lose RAID when updating BIOS as it automatically gets back to AHCI (default modes). So if you ever want to update BIOS, best is to disconnect HDDs, update BIOS and reconnect them before entering BIOS.

  • After BIOS update Satellite L350-172 doesn't start anymore

    Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
    I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
    "It was stopped for reason not to damage the Computer" - blue schreen.
    How can I downgrade the bios again? Or - what have I to change in the bios-settings?

    Hi schuwe,
    Im a little bit confused about your posting. How do you tell your BIOS not to restart?
    Anyway, after BIOS update you should load the default settings in BIOS.
    Did you choose the right BIOS especially for your model?

  • Satellite Pro L100 does not run after BIOS update

    Ok the machine is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during a BIOS update from the official Toshiba website. I downloaded the zip file, extracted it and activated the .exe file inside.
    The window opened by the .exe was a BIOS flashing program, the .exe also simultaneously wrote a new BIOS file to a temporary folder.
    When tried to use the program all I got was an error saying that it couldn't find the new BIOS to input.
    I tried again only to get the same error. I then left the laptop for several minutes and when I returned, I found a blank unresponsive laptop.
    By unresponsive I mean an obvious lack of BIOS functions i.e. power LED's not changing when plugging in of unplugging from the mains and the fact that I had to pull the battery out to turn the machine off. When the machine is turned on now all it does is check the drives and restarts (no display, no beeps)
    What do I do?
    The first thing that came to mind was to reset the BIOS.
    One problem, I can't find the RTC battery or a jumper switch.

    I have at least found out why this happened, the program obtained from Toshiba automatically 'attempts' to upgrade the BIOS upon activation. This means that the program engaged with errors without my authorisation. I don't find this very impressive from a company as large and powerful as Toshiba.
    Also it may be possible to fix myself if the BIOS installation instructions made sense, extracting the .zip file does not create three sub folders and pressing the F12 key does not start the laptop.

  • Hi . plz help me. after bios update. i could work till I shutdown

    After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
    I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

    take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Satellite Pro L300: BSOD after BIOS update

    Hi
    after update the Bios of Satellite Pro L300, the windows not start!
    Its show the blue dead screen!
    What can i do?

    Hi
    Are you able to access the BIOS settings?
    Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
    Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
    But if the SATA drivers are not included the SATA mode should be set to compatible.
    Please check this!
    Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

  • Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

    Hi.
    Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
    bios-20070709111839.zip
    After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
    I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
    What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
    Thanks in advance
    MAT

    > Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
    What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
    You could try to access the BIOS and try to set the settings to default.
    Dont forget to save the settings if you will exit the BIOS.
    But if this procedure does not help, you will have to contact the ASP in your country.
    Possibly the guys will try to flash the BIOS again with other special version.
    Good luck
    Greetings

  • After bios update, my window media player got hang and headphone clarity is not proper

    HP Pavilion g6  after bios update, my window media player  got hang and headphone clarity is not proper

    Hello mathewstays,
    Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for