Problems adding new rows to a simple user defined table manually

Hi
I have just created a user defined table ( SAP 2007 SP01 PL9 ) but when I try to add a line using tools ->userdefined tables I get the following error -
conversion failed when converting the nvarchar value '-3 @GLMAP to data type int ( CINF )
The table is called GLMAP and I simply added 3 alpha fields
I put 1 into all the fields on screen
Can anyone suggest anything please as ideally I would like the end user to be able to update this simple table
Many thanks
Regards Andy

Andy
I think in your case you have used DBDataSource to display data from UDT on your form.
Easyier to use UDO than User Defined Table, because you do not have to programming at UDO based forms.
What István tried to say:
Check your sp_transactionnotification procedure, maybe you have used @object_type variable as integer instead of nvarchar
Regards
J

Similar Messages

Problem in retriving data in query of user defined table(Document)

hi,
am retriving data from two tables(RDR1,@DOCUMNET) by making joins
when i am giving conditions in where clause of @DOCUMENT am got the below error
BUT without any conditons in where clause all data is retriving from tables
"This entry already exists in the following tables 'Service Contracts' (OCTR) (ODBC -2035) [Message 131-183]"
example:
" select * FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry LEFT JOIN [dbo].[@DOCUMENT] T2 ON T1.DocEntry=T2.U_DocEntry AND
T1.LineNum=T2.U_LineNum
WHERE T0.[DocNum]=[%0]
AND T1.[Dscription]='[%1]'"

Hello rajesh
As I see it, your problem may have something to do with the search variables the [%x] , sometimes you need to put quotes around '[%0]' if the field is alphanumeric or character based.
Please try this :
SELECT * FROM ORDR T0
INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry
LEFT JOIN [dbo].[@DOCUMENT] T2 ON
T1.DocEntry=T2.U_DocEntry AND T1.LineNum=T2.U_LineNum
WHERE T0.DocNum='[%0]' AND T1.Dscription=' [%1]'
Best Regards
Amin

CANT execute query with parameter on user defined tables using query genera

Dear All,
I have problem when executing query with parameter on user defined tables using query generator.
It seems SBO cannot accept parameter to query user defined tables.
I've tried these:
SELECT T0.U_Status FROM [@ST_PR_H] T0 WHERE T0.U_Status = [%0] --- this FAIL
I try to pass the value directly without using parameter and It works
SELECT T0.U_Status FROM [@ST_PR_H] T0 WHERE T0.U_Status = 2 --- this SUCCESS
This one works
SELECT * FROM RDOC T0 WHERE T0.width =[%0] --- this SUCCESS
and this one works too
SELECT * FROM RDOC T0 WHERE T0.width = 595 --- this SUCCESS
Is there anyone can help me ....???
Thanks,
Alfa

I generated this code using query wizard ....
SELECT T0.[U_Status] AS 'Document Status' FROM [dbo].[@ST_PR_H] T0 WHERE T0.[U_Status] = (N'2' )
and replaced the (N'2' ) with [%0]
SELECT T0.[U_Status] AS 'Document Status' FROM [dbo].[@ST_PR_H] T0 WHERE T0.[U_Status] = [%0]
and It worked ......
Thanks 4 all .....

Adding new row to the reports list page

How can I add a new report row in the reports list of the reports tab.
Ex: a new row to the report "users by Date of Join report" is to be added
How can we add Please help me out in this

I am facing the same problem!
camickr wrote:
Try adding an empty row containing a null value for the String instead of the empty String.camickr, it will not help, the DefaultRowSorter in the "*+compare(int model1, int model2)+*" method return -1 if the first value is null and 1 if the sacond value is null. and incase of DESCENDING it mult by -1.
                // Treat nulls as < then non-null
                if (v1 == null) {
                    if (v2 == null) {
                        result = 0;
                    } else {
                        result = -1;
                } else if (v2 == null) {
                    result = 1;
                } else {
                    result = sortComparators[counter].compare(v1, v2);
                if (sortOrder == SortOrder.DESCENDING) {
                    result *= -1;
                }And this is the real problem!
The empty line is sorted as the smallest value and incase of DESCENDING it will be the first line (because of the mult by -1).
We could have overide it and incase of the empty row(usualy the last row) do not mult by -1 in DESCENDING mode.
But the problem is that the "+*compare*+" method and it's caller "*+Row+*" inner class are private :-(
It is not wise to do it but we can do like kmp83 wrote:
kmp83 wrote:
copy/duplicate "private" code from DefaultRowSorter into my extended class.Anyone have another suggestion?

How to refresh the grid so that default values come on adding new row.

Hi Experts,
In alv grid while adding new row, i want some 2-3 column values to come by default from already existing row in grid.
i am getting new row in internal table with 2-3 default values and rest columns blank on adding new row in alv grid
but the entire row is coming blank, not able to get the default values in new row
how can i refresh the grid so that default values come on adding new row.
thanks

Hi Surabhi,
Use this in Interactive section even if you are doing simple ALV.
DATA:
lv_ref_grid TYPE REF TO cl_gui_alv_grid.
CLEAR : gv_tcode.
*-- to ensure that only new processed data is displayed
IF lv_ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = lv_ref_grid.
ENDIF.
IF NOT lv_ref_grid IS INITIAL.
CALL METHOD lv_ref_grid->check_changed_data.
ENDIF.
THis will solve your problem.
Regards,
Vijay

Can iOS Numbers copy formulas when adding new rows?

iOS Numbers table add row is not copying previous cell formulas. Is this supported or not?
I have a table with lots of columns and all of them have formulas. When I click at the lower left of the table to add a row, none of the new cells have the formulas. I have to manually go through every column and copy the formulas to the new row.
This is not very practical if you're planning to use Numbers on the go with an iPad. In my case, I have to quickly get a new row ready as needed. I was hoping there is a preference setting somewhere like "copy formulas when adding new row".

I had the same issue with the added twist that I wanted to reference the created cells in formulas in other sheets. This is what works for me:
I use a form to enter data. The referenced sheet is set up like this:
1     Name     Date     ServPayment    SalesPayment     Total
2     Week1                                                                 =sum (ServPayment,SalesPayment)
3                                                                                =sum (ServPayment,SalesPayment)
4     TotWeek1                                                            =sum (Total2,Total3)
"Total" sums the 2 Payments, TotWeek1 sums the totals.
In the entry form I never add data to the empty line. In this example, I would start at "Week1" and tap the "+" to add a new form. This creates the line in the referenced sheet with my formulas. As I continue, I always start at the last entry I have made and tap "+".
When I create a line that does not have the formula on either side, I do not get the formula.
Hope this helps.

Null Pointer Exception When Adding New Row on Table

Hello JheadStart Team
I have used detail group with table layout , when I am clicking on AddRow button on detail table , I encounter NulllPointer Exception . I have traced the code and fount that in JhsCollectionModel when adding new row following
condition occurs :
DCIteratorBinding ib = getRangeBinding().getIteratorBinding();
int rangeSize = ib.getRangeSize();
int rowsInRange = ib.getAllRowsInRange().length;
because getAllRowsInRange is Null then the error raise.
My JheadStart ver is 10.1.3.3.85 .
Detail Group with table layout setting is :
Use Table range=true
Show New Row at top=true
New Rows:empty
Show Add New Row Button :true
Regards

Given the build you are using, I assume you are an Oracle employee.
Is this correct? if so, please post your question to the [email protected] mailing list.
Steven Davelaar,
JHeadstart team.

EDIT method doesn't work after adding new row

I would like to start editing after adding new row into TableView.
I copied example from Oracle website: [Using JavaFX UI Controls - 13 Table View|http://docs.oracle.com/javafx/2/ui_controls/table-view.htm#CJAGDAHE]. Then I put additional button for adding new row and define action for the button.
    final Button addButton = new Button("Add");
    addButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            Person p = new Person("", "", "");
            table.getItems().add(p);
            table.getSelectionModel().select(p);
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });In result I can see selected new row but the table doesn't start edditing in the third column.
I have similar method for editing existing rows and it works properly.
    final Button editButton = new Button("Edit");
    editButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });Could you help me what I do wrong?

Try wrapping the setCaretPosition(...) method in a SwingUtilities.invokeLater(...)
caret=outputArea.getDocument().getText(0,outputArea.getDocument().getLength()).length();Should be:
caret = outputArea.getDocument().getLength();

Need to add a new row at the end of the table

Experts,
working jdev 11.1.1.3.0
i am adding row programetically, my requirement need to add the row at after last row.
i tried different ways.
Row newLastRow = getPWBBidLaneVO().last();
int lastRowIndex = getPWBBidLaneVO().getRangeIndexOf(newLastRow);
getPWBBidLaneVO().insertRowAtRangeIndex(lastRowIndex - 1,
laneRow);
this is giving --- java.lang.ArrayIndexOutOfBoundsException: 0
and
http://kohlivikram.blogspot.com/2008/10/add-new-row-in-adf-table-on-button.html --- its giving index out of bound because vo.getRangeSize() is 25. We set this value at vo for performance improment suggestions.
is there a way to add a new row at the end of the table?

Add this to the view row impl class
       public void insertRow(Row row) {
           //go to the end of Rowset if it has rows
           Row lastRow = this.last();
           if (lastRow !=null){
                //insert new row at the end and make it current
               int indx = this.getRangeIndexOf(lastRow)+1;
               this.insertRowAtRangeIndex(indx,row);
               this.setCurrentRow(row);
           }else { // empty Rowset
           super.insertRow(row);
           }

Add a new row at the top of a table in GUI

Hi,
I am using JDev 11.1.1.1.0. I need to be able to let users add a new row at the top of a table and not anywhere else in the middle of table rows. I cannot seem to find a way to do it. note that it does not matter where a new row gets inserted in the db, i am only concerned about restricting the insert in the GUI to the topmost line/row.
Thanks,
AJ

Hi
Can you try with writing your custom create method in application module and calling same from UI on command button action like
public void createNewRow()
ViewObjectImpl vo = getVO1();
Row newRow= vo.createRow()
vo.insertRowAtRangeIndex(0, newRow);
Vikram

Problem in EIS with "user-defined table"

Platform : z/osrdbms : db2 v7Olap : Db2OlapMy problem :I try to make a "User-Defined table" in a meta-model whith this SQL definitionselect a.idele, a.idele0, b.lbele from u1g.fordv0 a, u1g.eledv0 b where a.iddim = 4 and a.idarb = 10 and a.idele = b.idele and a.iddim = b.iddim(description of the two simple table :CREATE TABLE U1G.ARBD ( IDDIM INTEGER NOT NULL, IDARB INTEGER NOT NULL, LBARB VARCHAR(255) NOT NULL, DTCRE TIMESTAMP NOT NULL WITH DEFAULT, DTMAJ TIMESTAMP ) CREATE TABLE U1G.ELED ( IDDIM INTEGER NOT NULL, IDELE INTEGER NOT NULL, LBELE VARCHAR(255) NOT NULL, DDVAL DATE NOT NULL, DFVAL DATE, DTCRE TIMESTAMP NOT NULL WITH DEFAULT, DTMAJ TIMESTAMP, MDCEL CHAR(1) NOT NULL, TYPE CHAR(1) NOT NULL ) )When i look at this "user-defined table" data in the meta model, it's okWhen i try to use this table as a dimension in a meta-outiline, it's okexcept when i try to load members in a cube.The load result say "the load terminated with errors"I look in the IS log :?Tue Jul 27 10:56:40 2004~ /IS/Worker/0x0/1090922163/Error/-104/Build-PQ72292 {DB2 for OS/390}{ODBC Driver}{DSN07011} DSNT408I SQLCODE = -104, ERROR: ILLEGAL SYMBOL ".". SOME SYMBOLS THAT MIGHT BE LEGAL ARE: + - AS <IDENTIFIER> DSNT418I SQLSTATE = 42601 SQLSTATE RETURN CODE DSNT415I SQLERRP = DSNHPARS SQL PROCEDURE DETECTING ERROR DSNT416I SQLERRD = 0 0 0 -1 69 0 SQL DIAGNOSTIC INFORMATION DSNT416I SQLERRD = X'00000000' X'00000000' X'00000000' X'FFFFFFFF' X'00000045' X'00000000' SQL DIAGNOSTIC INFORMATION ERRLOC=1:13:1 ?Tue Jul 27 10:56:40 2004~ /IS/Worker/0x0/1090922163/Informational/-104/Build-PQ72292 SELECT. aa."IDELE0", aa."IDELE", aa."LBELE" FROM.(select a."idele" .., a."idele0" .., b."lbele" from u1g.fordv0 a, u1g."eledv0" b where a.iddim = 4 and a.idarb = 10 and a.idele = b.idele and a.iddim = b.iddim) aaI don't understand why it's working in the meta model (the sql is good, i got the data)and why it's not working in the meta outline ?

Platform : z/osrdbms : db2 v7Olap : Db2OlapMy problem :I try to make a "User-Defined table" in a meta-model whith this SQL definitionselect a.idele, a.idele0, b.lbele from u1g.fordv0 a, u1g.eledv0 b where a.iddim = 4 and a.idarb = 10 and a.idele = b.idele and a.iddim = b.iddim(description of the two simple table :CREATE TABLE U1G.ARBD ( IDDIM INTEGER NOT NULL, IDARB INTEGER NOT NULL, LBARB VARCHAR(255) NOT NULL, DTCRE TIMESTAMP NOT NULL WITH DEFAULT, DTMAJ TIMESTAMP ) CREATE TABLE U1G.ELED ( IDDIM INTEGER NOT NULL, IDELE INTEGER NOT NULL, LBELE VARCHAR(255) NOT NULL, DDVAL DATE NOT NULL, DFVAL DATE, DTCRE TIMESTAMP NOT NULL WITH DEFAULT, DTMAJ TIMESTAMP, MDCEL CHAR(1) NOT NULL, TYPE CHAR(1) NOT NULL ) )When i look at this "user-defined table" data in the meta model, it's okWhen i try to use this table as a dimension in a meta-outiline, it's okexcept when i try to load members in a cube.The load result say "the load terminated with errors"I look in the IS log :?Tue Jul 27 10:56:40 2004~ /IS/Worker/0x0/1090922163/Error/-104/Build-PQ72292 {DB2 for OS/390}{ODBC Driver}{DSN07011} DSNT408I SQLCODE = -104, ERROR: ILLEGAL SYMBOL ".". SOME SYMBOLS THAT MIGHT BE LEGAL ARE: + - AS <IDENTIFIER> DSNT418I SQLSTATE = 42601 SQLSTATE RETURN CODE DSNT415I SQLERRP = DSNHPARS SQL PROCEDURE DETECTING ERROR DSNT416I SQLERRD = 0 0 0 -1 69 0 SQL DIAGNOSTIC INFORMATION DSNT416I SQLERRD = X'00000000' X'00000000' X'00000000' X'FFFFFFFF' X'00000045' X'00000000' SQL DIAGNOSTIC INFORMATION ERRLOC=1:13:1 ?Tue Jul 27 10:56:40 2004~ /IS/Worker/0x0/1090922163/Informational/-104/Build-PQ72292 SELECT. aa."IDELE0", aa."IDELE", aa."LBELE" FROM.(select a."idele" .., a."idele0" .., b."lbele" from u1g.fordv0 a, u1g."eledv0" b where a.iddim = 4 and a.idarb = 10 and a.idele = b.idele and a.iddim = b.iddim) aaI don't understand why it's working in the meta model (the sql is good, i got the data)and why it's not working in the meta outline ?

Error while adding records in user defined table

Dear all,
                I am adding a record in user defined table using   .add() method. the code is given below. while adding it raises the following error
"-1[Microsoft] [SQL Native Client] [SQL Server] Conversion failed when converting the nvarchar value '-3 @BG_MAILSETTINGS' to data type int. (CINF). "
All the fields are varchar date type.
            Dim oUDT As SAPbobsCOM.UserTable
            oUDT = oCompany.UserTables.Item("BG_MAILSETTINGS")
            With oForm.DataSources.UserDataSources
                    oUDT.Code = "1"
                    oUDT.Name = "SMTPSERVER"
                    oUDT.UserFields.Fields.Item("U_SERVER").Value = .Item("EDTSMTPSVR").ValueEx
                    oUDT.UserFields.Fields.Item("U_EMAIL").Value = .Item("EDTFEMAIL").ValueEx
                    oUDT.UserFields.Fields.Item("U_PORT").Value = .Item("EDTSMTPPRT").ValueEx
                    oUDT.UserFields.Fields.Item("U_USERNAME").Value = .Item("EDTSMTPUSR").ValueEx
                    oUDT.UserFields.Fields.Item("U_PASSWORD").Value = .Item("EDTSMTPPWD").ValueEx
                    oUDT.UserFields.Fields.Item("U_AUTHENT").Value = .Item("CMBSMTPAUT").ValueEx
                    K = oUDT.Add
                    If K <> 0 Then
                        oCompany.GetLastError(iErrCode, sErrMsg)
                        MsgBox(CStr(iErrCode) & "-" & sErrMsg, vbCritical, "Error")
                        Exit Sub
                    End If
             End with
Could any one please say the solution for this.
Many thanks,
Manikandan.
Edited by: Rui Pereira on Dec 23, 2008 3:49 PM

Dear Manikandan P,
Is there any change and check in stored procedure SBO_SP_TransactionNotification?
Best Regards
Jane Jing
SAP Business One Forums team
Edited by: Rui Pereira on Dec 23, 2008 3:56 PM

Error in simple user defined function

Hi all,
I have seen one simple user defined function on scenario. Now it is working fine. Same code I have used another place. But it is giving some errors
D:/usr/sap/C08/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapc6fa0c70297511dbaf7e00c09f4504e7/source/com/sap/xi/tf/_ST_MM_.java:3: package javax.mail.internet does not exist
import com.sap.aii.mappingtool.tf3.;import com.sap.aii.mappingtool.tf3.rt.;import java.util.;import java.io.; import java.lang.reflect.;import javax.mail.internet.;import javax.mail.;import java.util.;import java.util.Date;import javax.activation.;import java.lang.reflect.;import javax.mail.event.*;
Like that it has shown 13 errors. I have given the package names in imports field what previous function has.

Hi,
Please see this from SAP help
<i>a. You can import Java packages to your methods from the Imports input field, by specifying them separated by a comma or semi-colon:
You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since all message mappings require these packages and therefore import them. You should be able to access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the package under Import. In other words, you do not have to import it as an archive into the Integration Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
In addition to the standard packages, you can also specify Java packages that you have imported as archives and that are located in the same, or in an underlying software component version as the message mapping.
b. Create your Java source text in the editor window or copy source text from another editor.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Regards
Vijaya

Use User Defined Tables in a Marketing Document on Row Level

Hello All,
Is there a way to use the fields from a User Defined Table in a Marketing Document on a row level such as for example Purchase Order.
If this is not possible directly, any known work-arounds?
Thanks for your effort,
gr.
Freek

Thanks for your idea/workaround. To be more precize, we don't want to pull information from a UDT field into a marketing document, but from the row-level we like to write information to an UDT field.
Any idea?
gr.
Freek

HOW TO TRANSFER USER DEFINED TABLE DATA IN NEW DATABASE

Dear all , I am trying to transfer user defined table data,in new database ,can you please tell how i can do it

Thanks for Quick responce
I have Following databases
1) Targate Database EOU TEST
2) Source database STI_BLANK
Table @MACHINE
I tried But it has some error
INSERT INTO EOU TEST.@MACHINE
SELECT STI_BLANK.@MACHINE* FROM STI_BLANK.@MACHINE
Edited by: Abhijit Bhise on Apr 1, 2010 3:27 PM
Edited by: Abhijit Bhise on Apr 1, 2010 3:28 PM

Problems adding new rows to a simple user defined table manually

Similar Messages

Maybe you are looking for