Problems after upgrade from 4.1 to 4.2

I've been experiencing some major issues since the upgrade to 4.2
- Very significant slowdowns on the Update brokers after version 4.1 (from 4.2)
- 100% CPU utilization
- The number of processes per user appears to increase from release 4.1 to 4.2
- Xnewt associated to the root account remains "hung" - process fails to complete successfully.
- Kiosk mode is being used with the kiosk Generic X session, users are starting a ksh script to launch the uttsc client.
- Suspect lack of compatibility with the new version?
- The ksh script retrieves information from the field "other infos" and based on this info launches several "ut" commands to define what type of connection, and options to use for each user.
- Suspected resource depletion by extracting the data used by the script?
- Multiple "pseudo" sessions are connected directly to the Windows systems, seem to be sticking the script in an endless loop when users do not have open sessions.
- Suspect resources are poorly recycled during multiple executions of the branching script?
Could anyone provide any feedback on these outstanding issues we're experiencing?

Hi again
Rolled back to the last known version of the project which worked prevously on 4.0.0 (as in, we were able to export as mpeg2 and flv) .. & don't seem to be able to export on v4.2.1 as flv or mpeg2... using the same settings. The export goes thru the load process, is about to start encoding, or started encoding and stops soonafter... no error messages that we can see. Shows elapsed time of 0 .. estimated time remaining (blank).
Very tight deadlines for Eurosport so any help appreciated :-)
Thanks
Jen

Similar Messages

Problems after upgrading from 10.2.3 to 10.2.8

After upgrading from 10.2.3 to 10.2.8, itunes "unexpectedly quits" when I try to purchase a song, and safari "unexpectedly quits" when I visit certain websites. Before upgrading, no such problems.

Hello rick,
First of all, welcome to the Apple discussions.
* How did you upgrade the OSX 10.2.3??
* Did you use the combo update?
* Did you run the dick repair permissions before an after
Here is the Combo Update for OSX 10.x
Combo Update
An here is how you use the disc repair permissions
About Disck Repair Permissions
Applications Quits
Let me know if so ...
Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
Dimaxum <]:~))

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problem after upgrade from patch level 36 to 43

Hi,
Recently our system is upgraded from 36 to 43 patch level. After this there are problem in doing hiring action, IT0000 is saving but the next infotype IT0001 does not gets saved and also no error message. So, really not able to figure out what could be the problem.
I was debugging the standard code i.e once the 'save' button is clicked in IT0001 in PA40, but in vain. I am not able to find out where or in which program/include the data gets saved in PA0001. If any one aware of this please let me know.
Since IT0001 is not getting saved, there are probs with IT0007 and IT0008.
Please let me know your views.
Thanks,
Arunsri

Hi Raju,
Thanks for the reply. Ya, the problem was not due to upgrade,but some other issue. Not able to find till now. I checked IGMOD features and it is in 'Active' mode only. No luck.
Edited by: Arunsri on Jan 27, 2012 4:18 PM

Mail flow problem after upgrade from cu1 to sp1

I have update Exchange server 2013 CU1 to SP1 (CAS Role). After upgrade mail cannot flow. all the mail are stuck.
CAS server use to mail flow outside and receive from outside. but The problem is this CAS server mail flow not work after upgrade exchange server 2013 CU1 to SP1.
Please give suggest.
Thanks

I didn't connect to queue viewer as because the version of exchange 2013 server are different. in the environment two CAS server and two Mailbox server. i just update one CAS server into SP1. and another CAS in CU3. Mailbox 01 is CU3 and Mailbox 02 is CU
1. So their is version difference in the environment.
So, when i update CAS server to SP1. That server is not working for mail flow.
Please suggest.

AUTO_RUNSTATS: problems after upgrade from 8.2 to 9.5

Hello guys,
We're appreciating a problem in our recentley upgraded databases 9.5
We've upgraded from release 8.2 and we have activated the following parameters:
db2 UPDATE DB CONFIG USING AUTO_MAINT ON AUTO_TBL_MAINT ON AUTO_RUNSTATS ON
Although we don't see auto_runstats running in database. How can I activate this issue? Isn't it enough to activate these parameters?
regards,
Filipe

Hello Filipe,
have a look at your dump directory, under events you find file like db2optstats(n).log
db2 runstats on table DB2DDP.STMTS
DB20000I The RUNSTATS command completed successfully.
2010-07-22-14.45.36.597065+120 E937346A585        LEVEL: Event
PID     : 463098               TID : 16547       PROC : db2sysc 0
INSTANCE: db2ddp               NODE : 000         DB   : DDP
APPHDL : 0-38427              APPID: *LOCAL.db2ddp.100722124520
AUTHID : DB2DDP
EDUID   : 16547                EDUNAME: db2agent (DDP) 0
FUNCTION: DB2 UDB, relation data serv, sqlrLocalRunstats, probe:10
COLLECT : TABLE AND INDEX STATS : Object name with schema : AT "2010-07-22-14.45.36.596771" : BY "User" : start
OBJECT : Object name with schema, 14 bytes
DB2DDP .STMTS
IMPACT : None
2010-07-22-14.45.36.744115+120 E937932A665        LEVEL: Event
PID     : 463098               TID : 16547       PROC : db2sysc 0
INSTANCE: db2ddp               NODE : 000         DB   : DDP
APPHDL : 0-38427              APPID: *LOCAL.db2ddp.100722124520
AUTHID : DB2DDP
EDUID   : 16547                EDUNAME: db2agent (DDP) 0
FUNCTION: DB2 UDB, relation data serv, sqlrLocalRunstats, probe:220
COLLECT : TABLE AND INDEX STATS : Object name with schema : AT "2010-07-22-14.45.36.743863" : BY "User" : success
OBJECT : Object name with schema, 14 bytes
DB2DDP .STMTS
IMPACT : None
DATA #1 : String, 49 bytes
RUNSTATS ON TABLE "DB2DDP"."STMTS" ON ALL COLUMNS
this is a manual runstats, you will also a ot of fabricated runstats.
Here is an output from db2 get db cfg for <SID>:
Automatic maintenance                      (AUTO_MAINT) = ON
   Automatic database backup            (AUTO_DB_BACKUP) = OFF
   Automatic table maintenance          (AUTO_TBL_MAINT) = ON
     Automatic runstats                  (AUTO_RUNSTATS) = ON
       Automatic statement statistics (AUTO_STMT_STATS) = ON
     Automatic statistics profiling    (AUTO_STATS_PROF) = OFF
       Automatic profile updates         (AUTO_PROF_UPD) = OFF
     Automatic reorganization               (AUTO_REORG) = OFF
Best regards,
Joachim

Problems after upgrade from SCVMM 2012 Sp1 to SCVMM 2012 R2

I did a in-place (uninstall VMM2012 Sp1, retain the database, and install VMM2012 R2 point to old database) upgrade. All the steps work fine.
The only problem (so far) is that when I create a new VM using a custom template (for example, Windows 2008 R2), the deploy fail with the following error:
Error (2912)
An internal error has occurred trying to contact the vm-scvmm2012.domain.com server: NO_PARAM: NO_PARAM.
WinRM: URL: [http://vm-scvmm2012.domain.com:5985], Verb: [INVOKE], Method: [GetError], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/bits/BitsClientJob?JobId={56B8E488-5DB9-4CC1-BEFA-AFF76E1E4D2D}]
Unknown error (0x80072f0d)
Recommended Action
Check that WS-Management service is installed and running on server vm-scvmm2012.domain.com. For more information use the command "winrm helpmsg hresult". If vm-scvmm2012.domain.com is a host/library/update server or a PXE server role then ensure
that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.
Information (26278)
VMM could not offload transfer the file \\vm-scvmm2012.domain.com\MSSCVMMLibrary\VHDs\Template_Windows_2008_R2_SP1.vhdx to C:\ClusterStorage\Volume1\VM-NEWVM\Template_Windows_2008_R2_SP1.vhdx.
Any ideas?

I have a similar problem when migrating VMs from Windows 2008 R2 (Non Clustered) Hyper-V to Windows 2012 Hyper Cluster. I had previously migrated about 100 VMs like this with no problem. It appears since upgrading from VMM SP1 Rollup 4 to Rollup 5 this problem
is happening. All Agents are up to date.
I can migrate VMs in the cluster no problem.
I removed the Windows 2008 R2 Hyper-V host and added it back which allowed the job to at least start but when it gets to the final steps of importing the VM it fails with the same error and references the VMM server.
Others suggest this is a VMM Certificate problem and you can remove the Cluster node and add it back again but I can't do that in a production Cluster with hundreds of VMs. That is not an acceptable solution.
How can we fix this?

Perfomance problem after upgrade from 9.2.0.6 to 9.2.0.8

Hi,
we have upgrade our RDBMS from 9.2.0.6 to 9.2.0.8, all our batch jobs became slow (plus 3hours on normal execution time of our query).
any suggestions.
Regards.
tt

I bet you just upgraded without any modification on parameters and/or way of gathering statistics. :)
I know it's very embrassing and frustrating that Oracle sometimes gets slow after just upgrade.
But it's designed to be that. Not to get slower, but to get faster.
Enhancement is the only purpose of upgrade, isn't it?
But there is always a chance that you hit some negative side effects of that enhancement.
For instance, optimizer gets equipped with new powerful query transformation algorithm.
But in very rare cases, it causes some queries got slower.
It has always been happening and l believe it will also happen with 11g. :(
The unfortuante thing is that there can be amazingly many reasons why Oracle gets slower after upgrade.
You need to search metalink for similiar issues and check statistics and execution plans as stated above.

Selection scren problem after upgrading from BW 3.0 to 3.5

hi,
We recently upgraded from 3.0 to 3.5. We haev a workbook with 8 queries and we used to get only one selection screen for all the queries(we one slection query which has all the variables of other queries) on refresh of all queries.But now after upgrading we get screens for each query.Any solution pls.
venku

hi deepak,
Can u help me more on this issue of finding the OSSNotes.I dont know where to find this.
thank you
kranthi

Problem after upgrading from 4.2 to 4.2.2

I just recently did an upgrade from 4.2 to 4.2.2 running on an Appliance. After the upgrade all the services do not load up. Running a "show app status LMS" always comes up with a message saying daemon manager is not fully intialized. The DCRServer process is just hanging with the status "waiting to initialize".
I am able to GUI in but can't use view any of the managed devices due to DCRServer in a hung state. I have restared LMS application multiple times. I have stopped LMS application and then reloaded the box. The issue still keeps occuring, im going to raise a TAC case but was wondering if anyone else has come across this issue?

Are you still facing the above issue ?
If yes send me the below information.
output of pdshow
ctm_config.txt from the below location:
NMSROOT\CSCOpx\MDC\tomcat\lib
NMSROOT\CSCOpx\MDC\tomcat\shared\lib
NMSROOT\CSCOpx\MDC\tomcat\webapps\cwhp\WEB-INF\lib
Also md.properties and Regdaemon.xml
Thanks
Afroz

JMS Receiver FCC Problem After Upgraded from SP19 to SP22 in XI3.0

Hello,
I am facing a problem in my Receiver JMS adapter in FCC just after the upgrading it from SP19 to SP22 in XI 3.0 by our basis consultant. Before that everything was working perfect in DEV.
I am getting the below mentioned error in CC monitoring.
> MP: Exception caught with cause com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.NullPointerException''; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.NullPointerException'
This problem is happening in other scenario too in our DEV system.
But at the same time since we have not applied any upgrade in QA therefore same scenario is working fine.
Regards,
Sarvesh

Ok Friends...
I got the solution from SAP.. there was a problem in the SP22 for XI 3.0 which I donloaded from Service Market Place. Now I have applied the correct SP22 to my system and now it is working fine...
I hope this may help you...
Regards,
Sarvesh

[SOLVED] KDE problems after upgrade from 4.10.0-1 to 4.10.1-1

Hi guys, after updating KDE ihave the following problems:
1. The widgets are unable to load (red cross icon) everywhere at desktop, at panel.
2. Panel need to be removed and added after boot.
3. The programs does not displaying at task manager.
4. Programs can not executed from quiq launch (alt+F2).
I have try to downgrade from cache it but it not works for me ((
Full removing KDE using pacman -Rsc and reinstating also does not work ((
Last edited by S1Lv3R (2013-04-03 20:35:30)

Inxsible wrote:are you fully updated ? or have you performed partial upgrade?
i not sure i have run the following command:
pacman -Sy kde

Problem after upgradation from Oracle 8.1.7 to Oracle 9i

Hello ,
I currently installed Oracle 9i, and i m using Mapx 4.5,
and in the executable I am adding serverlayer
(a layer formed by querying the geoloc column from oracle
table), which was working fine with Oracle 8.1.7, but after
installation of Oracle 9i , i encounter the following error
while adding a serverlayer
ORA-13373 Element of type Extent is not supported for Geodetic
data
Cause: Element type extent for a polygon geometry is not
supported for
geodetic data.
Action: Convert the extent type polygon to a regular 5 point
polygon
and set
etype accordingly.
ORA-06512 at string line string
Cause: Backtrace message as the stack is unwound by unhandled
exceptions.
Action: Fix the problem causing the exception or write an
exception
handler
for this condition. Or you may need to contact your application
administrator or database administrator
Can anybody tell me what's going wrong ?
As I urgently got to fix it.
Thanks in advance
Binoy.

Hi,
Oracle9i has a geodetic data model. Your data has a geodetic
srid, which means that the data will need to conform to the rules
associated with geodetic data. These rules include:
No optimized rectangles are supported (my guess is the app is
using an optimized rectangle as a query window, but the data
could be the issue also).
No arcs or circle types are supported.
A single line segment cannot be equal to or greater than 1/2 the
great circle distance.
A polygon cannot have an area equal to or greater than 1/2 the
surface area of the earth.
You should try to find what version of Mapx supports Oracle9i.
Regards,
dan

Phone problems after upgrade from 8.5 to 9.0

Hi everyone,
I upgraded our UCCX cluster last week from 8.5 to 9.0, and ever since then I've been getting reports of delays when answering a call (up to ~10 seconds). I also have one user that reports not being able to hangup at the end of a call (has to wait for the customer to terminate the call). Any ideas?
CUCM Version: 9.1.1.20000-5
UCCX Version: 9.0.2.11001-24
Also, I have ran the JTAPI resync to ensure that wasn't the issue.

Thanks for the input guys, but it ended up being a weird problem resulting from extension mobility. When I upgraded the cluster, I forgot to deactivate extension mobility, and this apparently confused CUCM. Our agents use extension mobility in order to allow for moving between physical phones and IP communicator, and the CDA records showed call transfers from the CCX being routed through the subscriber (which is at a remote WAN site) before reaching the phones using extension mobility. Deactivating the service on the entire cluster, rebooting the cluster, and then reactivating the service fixed the issue.

Switchover problem after upgrade from 11.2.0.1 to 11.2.0.2

Hello
I succesfull upgraded my database from 11.2.0.1 to 11.2.0.2 on my test enviroment.
My enviroment works with dataguard configuration.
Data Guard management is dgmgrl.
OS is Linux Redhat x86_64
I have problem with switchover operation:
During switchover operation (with dgmgrl) new primary database is switched succesfull but problem is with new standby database, I have message:
ORA-10458: standby database requires recovery
ORA-01194: datafile 1, needs more recovery to be consistent
ORA-01110: datafile 1: '/u01/app/oracle/oradata/DB1/system01.dbf'
To end switchover operation I should start new standby instance. But if i try startup It i have:
ORA-00845: MEMORY_TARGET not supported on this system
In alert log new standby database I have:
Completed: ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY WITH SESSION SHUTDOWN
Wed Jan 19 08:15:00 2011
Performing implicit shutdown abort due to switchover to physical standby
Shutting down instance (abort)
License high water mark = 20
USER (ospid: 13290): terminating the instance
Instance terminated by USER, pid = 13290
Wed Jan 19 08:15:02 2011
Instance shutdown complete
ORA-1092 : opitsk aborting process
Wed Jan 19 08:15:06 2011
Starting ORACLE instance (normal)
WARNING! Recovering data file 1 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 2 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 3 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
WARNING! Recovering data file 4 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command..
ARC9: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Media Recovery Log /u01/app/oracle/redologs2/archiveredolog/DB1/1_194_739556401.dbf
Identified End-Of-Redo for thread 1 sequence 194
Wed Jan 19 08:15:20 2011
Using STANDBY_ARCHIVE_DEST parameter default value as /u01/app/oracle/oradata/DB1/archivelog/
RFS[1]: Assigned to RFS process 13553
RFS[1]: Identified database type as 'physical standby': Client is ARCH pid 3536
Starting Data Guard Broker (DMON)
Wed Jan 19 08:15:21 2011
INSV started with pid=32, OS id=13555
RFS[1]: Selected log 4 for thread 1 sequence 197 dbid 1279411810 branch 739556401
Archived Log entry 44349 added for thread 1 sequence 197 ID 0x4f8d3d29 dest 1:
Archived Log entry 44350 added for thread 1 sequence 197 ID 0x4f8d3d29 dest 2:
Archived Log entry 44351 added for thread 1 sequence 197 ID 0x4f8d3d29 dest 3:
Wed Jan 19 08:15:24 2011
Resetting standby activation ID 0 (0x0)
Media Recovery End-Of-Redo indicator encountered
Media Recovery Applied until change 972405267
Completed standby crash recovery.
Errors in file /u01/app/oracle/diag/rdbms/tdb1nod1/DB1/trace/DB1_ora_13451.trc:
ORA-10458: standby database requires recovery
ORA-01194: plik 1, aby byl spojny, wymaga dalszego przywracania
ORA-01110: plik danych 1: '/u01/app/oracle/oradata/DB1/system01.dbf'
ORA-10458 signalled during: alter database open...
Wed Jan 19 08:15:25 2011
RFS[2]: Assigned to RFS process 13603
RFS[2]: Identified database type as 'physical standby': Client is ARCH pid 3532
Wed Jan 19 08:15:26 2011
RFS[3]: Assigned to RFS process 13619
RFS[3]: Identified database type as 'physical standby': Client is ARCH pid 3536
RFS[3]: Opened log for thread 1 sequence 196 dbid 1279411810 branch 739556401
Wed Jan 19 08:15:26 2011
RFS[4]: Assigned to RFS process 13617
RFS[4]: Identified database type as 'physical standby': Client is ARCH pid 3534
Archived Log entry 44352 added for thread 1 sequence 196 rlc 739556401 ID 0x4f8d3d29 dest 4:
RFS[4]: Opened log for thread 1 sequence 195 dbid 1279411810 branch 739556401
Archived Log entry 44353 added for thread 1 sequence 195 rlc 739556401 ID 0x4f8d3d29 dest 4:
Wed Jan 19 08:15:29 2011
RFS[5]: Assigned to RFS process 13643
RFS[5]: Identified database type as 'physical standby': Client is LGWR ASYNC pid 7251
Primary database is in MAXIMUM PERFORMANCE mode
RFS[5]: Selected log 4 for thread 1 sequence 199 dbid 1279411810 branch 739556401
Wed Jan 19 08:15:30 2011
RFS[6]: Assigned to RFS process 13645
RFS[6]: Identified database type as 'physical standby': Client is ARCH pid 3536
RFS[6]: Selected log 5 for thread 1 sequence 198 dbid 1279411810 branch 739556401
Wed Jan 19 08:15:31 2011
Archived Log entry 44354 added for thread 1 sequence 198 ID 0x4f8d3d29 dest 1:
Archived Log entry 44355 added for thread 1 sequence 198 ID 0x4f8d3d29 dest 2:
Archived Log entry 44356 added for thread 1 sequence 198 ID 0x4f8d3d29 dest 3:
Wed Jan 19 08:15:45 2011
RFS[7]: Assigned to RFS process 13699
RFS[7]: Identified database type as 'physical standby': Client is ARCH pid 3532
Wed Jan 19 08:16:47 2011
RFS[7]: Assigned to RFS process 13699
RFS[7]: Identified database type as 'physical standby': Client is ARCH pid 3532
Wed Jan 19 08:16:47 2011
Starting ORACLE instance (normal)
WARNING: You are trying to use the MEMORY_TARGET feature. This feature requires the /dev/shm file system to be mounted for at least 2147483648 bytes. /dev/shm is either not mounted or is mounted with available space less than this size. Please fix this so that MEMORY_TARGET can work as expected. Current available is 1586806784 and used is 3781902336 bytes. Ensure that the mount point is /dev/shm for this directory.
memory_target needs larger /dev/shm
Wed Jan 19 08:30:17 2011
db_recovery_file_dest_size of 102400 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
It is look like the instance proseses was not shutdown during operation shutdown abort.
If I connect to instance with sqlplus i have message:
Connected with idle instance
Proceses are still active.
Output linux statement ps -aux | grep oracle:
root 13032 0.0 0.0 88060 3248 ? Ss 08:13 0:00 sshd: oracle [priv]
oracle 13039 0.0 0.0 88060 1860 ? S 08:13 0:00 sshd: oracle@pts/1
oracle 13040 0.0 0.0 68248 1676 pts/1 Ss 08:13 0:00 -bash
oracle 13402 0.0 0.3 2328080 22220 ? Ss 08:15 0:00 ora_pmon_DB1
oracle 13404 0.0 0.2 2325832 15536 ? Ss 08:15 0:00 ora_vktm_DB1
oracle 13408 0.0 0.2 2325832 15584 ? Ss 08:15 0:00 ora_gen0_DB1
oracle 13412 0.0 0.2 2325832 15468 ? Ss 08:15 0:00 ora_diag_DB1
oracle 13414 0.0 0.2 2325832 15584 ? Ss 08:15 0:00 ora_dbrm_DB1
oracle 13416 0.0 0.2 2325832 15680 ? Ss 08:15 0:00 ora_psp0_DB1
oracle 13419 0.1 0.4 2327368 25688 ? Ss 08:15 0:08 ora_dia0_DB1
oracle 13422 0.0 0.8 2325832 49152 ? Ss 08:15 0:02 ora_mman_DB1
oracle 13425 0.0 0.4 2332100 27344 ? Ss 08:15 0:00 ora_dbw0_DB1
oracle 13427 0.0 0.2 2325832 16648 ? Ss 08:15 0:00 ora_lgwr_DB1
oracle 13432 0.0 0.3 2325832 21524 ? Ss 08:15 0:00 ora_ckpt_DB1
oracle 13434 0.0 0.2 2325832 17600 ? Ss 08:15 0:00 ora_smon_DB1
oracle 13436 0.0 0.2 2325832 15604 ? Ss 08:15 0:00 ora_reco_DB1
oracle 13438 0.0 0.4 2326468 27976 ? Ss 08:15 0:00 ora_mmon_DB1
oracle 13440 0.0 0.3 2325832 22120 ? Ss 08:15 0:00 ora_mmnl_DB1
oracle 13442 0.0 0.2 2331932 15764 ? Ss 08:15 0:00 ora_d000_DB1
oracle 13444 0.0 0.2 2326896 14784 ? Ss 08:15 0:00 ora_s000_DB1
oracle 13447 0.0 0.2 2325852 16628 ? Ss 08:15 0:00 ora_dmon_DB1
oracle 13527 0.0 0.8 2357896 48984 ? Ss 08:15 0:00 ora_arc0_DB1
oracle 13530 0.0 0.5 2341496 31832 ? Ss 08:15 0:00 ora_arc1_DB1
oracle 13532 0.0 0.8 2359596 50968 ? Ss 08:15 0:00 ora_arc2_DB1
oracle 13534 0.0 0.7 2357896 48844 ? Ss 08:15 0:00 ora_arc3_DB1
oracle 13536 0.0 0.8 2357896 48860 ? Ss 08:15 0:00 ora_arc4_DB1
oracle 13538 0.0 0.5 2341384 31524 ? Ss 08:15 0:00 ora_arc5_DB1
oracle 13540 0.0 0.5 2341384 31536 ? Ss 08:15 0:00 ora_arc6_DB1
oracle 13542 0.0 0.5 2341384 31536 ? Ss 08:15 0:00 ora_arc7_DB1
oracle 13545 0.0 0.5 2341384 31536 ? Ss 08:15 0:00 ora_arc8_DB1
oracle 13547 0.0 0.5 2341384 31536 ? Ss 08:15 0:00 ora_arc9_DB1
oracle 13555 0.0 0.2 2325852 16168 ? Ss 08:15 0:00 ora_insv_DB1
root 18288 0.0 0.0 88060 3240 ? Ss 08:30 0:00 sshd: oracle [priv]
oracle 18290 0.0 0.0 88200 2012 ? S 08:30 0:00 sshd: oracle@notty
oracle 18291 0.0 0.0 54004 2232 ? Ss 08:30 0:00 /usr/libexec/openssh/sftp-server
oracle 18336 0.0 0.2 87132 13336 ? Ssl 08:41 0:00 /u01/app/oracle/product/11.2.0/db_2/bin/tnslsnr LISTENER -inherit
oracle 18607 0.1 0.6 2350168 39972 ? Ss 09:37 0:00 oracleDB1 (LOCAL=NO)
oracle 18609 0.1 1.4 2395944 85880 ? Ss 09:37 0:00 oracleDB1 (LOCAL=NO)
oracle 18611 0.0 0.5 2346216 36100 ? Ss 09:37 0:00 oracleDB1 (LOCAL=NO)
oracle 18615 0.1 0.2 2331228 18136 ? Ss 09:38 0:00 oracleDB1 (LOCAL=NO)
oracle 18617 0.1 0.3 2332184 21508 ? Ss 09:38 0:00 oracleDB1 (LOCAL=NO)
oracle 18619 0.0 0.0 65556 940 pts/1 R+ 09:38 0:00 ps -aux
oracle 18620 0.0 0.0 61160 736 pts/1 S+ 09:38 0:00 grep oracle
Shared memory is still allocated for instance:
df -h /dev/shm
System plików rozm. użyte dost. %uż. zamont. na
tmpfs 5,0G 2,0G 3,1G 39% /dev/shm
Please for help.
Regards
Karol

It is lool like the new standby database is started from old home:
alert log:
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfileDB1.ora
System parameters with non-default values:
My old home (11.2.0.1) u01/app/oracle/product/11.2.0/db_1
My new home (11.2.0.2) u01/app/oracle/product/11.2.0/db_2
previous start this database:
alert log:
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_2/dbs/spfileDB1.ora
System parameters with non-default values:
Why database is starting from old home?
I Changed directories in .bash_profile oracle OS user.

Problems after upgrade from 4.1 to 4.2

Similar Messages

Maybe you are looking for