Problems After Upgrading to New IOS (12.2.7a) With Passwords

Essentially, the title tells it all. After upgrading from 12.0.8 to 12.2.7a, our passwords wouldn't work. Is this because of a different encryption algorithm? We are using the service password-encryption command, and would like to keep it on during our installations.

We use TACACS, then local, but only after a site is in production.....but in this case, as this was a new turnup, we didn't apply TACACS yet.

Similar Messages

  • HT201412 after upgrading to newer iOS version 6 only my iphone 4 got turned off.

    hi ,
    after upgrading to newer iOS version 6 only my iphone 4 got turned off. it could not turned.. contacted apple store they tried all the option .. solution was replace with other iphone4 by paying £119, Which is really not the new one, its refurbished one..

    So what's your question?

  • Problem after upgrading to iPhone iOS 7

    Gentlemen Apple
    I have a problem after upgrading to iPhone iOS 7
    Required to calculate the icloud lost me
    <Email Edited by Host>

    I have the same issue after upgrad my iphone 5 to IOS7?? what is the reason and what is the solution?

  • HT1222 my iPhone 4 hang/unresponsive after upgrading to new IOS 7

    Hi All,
    I am holding iPhone4 and my iPhone4 become slow or unresponse after upgrading to IOS7. For example, when I wanted to call someone, I click on contact and search a person name, the iPhone4 hang before I can type the complete name. I need to wait for several second for OS to time out. It is really problem for me. When I need to call a person urgently, I can successfully call after 1 to 2 mininute to wait for iPhone to response.
    It become unusable for my day to day activities and it affect my woork.
    I wanted to upgrade to new phone but it is out of stock most of the time. It has been happening to me for past two months.
    How to overcome the issue of unresponsive of new IOS7 in my old iPhne4.
    Someone told me to free up my memory to make it faster. I have 26GB free in my iPhone4 but it does not improve the suituation.
    It hange or unresponsive all the time and it become unusable. It is not usable for life and death suituation.
    Is there anyone can help me for this issue၊
    thank you in advance.

    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then... Restore as New (not backup) and Re-Sync your Content.
    Restoring  >  http://support.apple.com/kb/HT1414
    SYNCING with iTunes >  http://support.apple.com/kb/HT1386

  • N73ME Themes Problem after upgrading to new firmwa...

    Hi All,
    I bought an N73 Music Edition when it was in 3.07 firmware version. Now I have upgraded it using NSU to 4.07.
    Currently I am facing a problem when trying to switch to some of the themes I installed before upgrade. These themes are not displayed in the Apps Manager.
    When I select Preview or Apply for these themes, the phone hangs and only the battery removal can help me to get rid of that state.
    Is there any way to remove such themes from my themes list?
    (I didn't restore my SD card items after upgrade. I just reinstalled the programs again.)
    Thanks.
    Girish Adat
    [ N73ME - V4.0812.4.2.1/21-03-2008/RM-133/(c) Nokia N73 Z5-01 ]

    Thanks dude. Its solved...!!
    Actually the theme name was not visible. I tried trial and error method...
    There are 4 files in the folders of working themes.
    When I deleted one folder with only 3 files, the problem is solved.
    The .ini file and the folder are named with some number-alphabet name, may be hex. And 3 files with just "themepackage" as the file name.
    I deleted one folder with only .mdm and .skn files and the .ini file. The other file missed some how during the backup restore after last software upgrade...
    Also some empty folders were there. I deleted them also with a backup in my lappy. But no errors were found after that...
    Thanks a lot...
    Girish Adat
    [ N73ME - V4.0812.4.2.1/21-03-2008/RM-133/(c) Nokia N73 Z5-01 ]

  • Problem after upgrading to new jpdk

    Hi,
    I upgraded my Oracle Portal version from 3.0.6 to 3.0.7 .I downloaded latest jpdk and upgraded it,made changes to provider.xml with new tags.
    But if I now try to test the provider on browser with http://myserver.mydomain.com:port/servlet/xxx
    It gives me error no 403 Forbidden Error.
    It says you dont have permission to access xxx.But I havent made any changes to httpd.conf or jserv.properties.The only change that I made is replaced the jpdk with new jpdk.
    Hope to find a solution.
    Regards,
    Mandar.

    if you have upgraded to jpdk 1.5, there is a new security feature to stop diplaying the provider test page on production systems. To activate it, you need to add ', debuglevel=1' to the end of you initArgs line for your provider in the zone.properties file you will be able to see the test page
    Roger

  • How do I recover uploaded songs from CD's after upgrading Itunes and Ios from external drive with older Itunes version?

    I upgraded to the newest version of Itunes on a new PC and the latest version of the IOS operating system for my Iphone 3GS and lost all of my songs that were uploaded from CD's.
    Prior to the upgrade I tried to synch and got a message that I need to save all purchases of songs and apps otherwise I would lose them.  I did and they saved.  However all of the music that I uploaded off of CD's were not transferred.  No matter what I did to get that music transferred from Iphone to Itunes prior to the upgrade it would not upload so I did the upgrade.  All of my apps and purchased Itunes successfully went back onto my Iphone but all of my music that I loaded into Itunes are gone from Iphone and Itunes.
    I had saved all of my songs on an external drive in an older version of Itunes.  I would like to plug that in tonight and see if I can get those songs loaded onto my iphone but now am worried that it will try and synch what is on the Iphone into that version and erase all of my songs.  Also I am afraid that any newly purchased songs directly onto the Iphone will be lost if I get all of the old data back.
    What do I need to do?

    The music sync is one way - computer to iphone.  the ONLY exception is itunes purchases.
    The songs from cd came from your computer in the first place, so they should still be there and should be included in your regular backup copy of your computer.

  • Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

    Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password. 
    Any DEFAULT Password so that i can unlock the settings menu.

    That's quite odd, just repeat the update process
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • After upgrading to latest IOS while playing games screen is flickering

    While playing games screen is flickering after upgrading to latest IOS.

    I have taken it out of the case - I figured it would obstruct the sensor (also have no screen protector).
    Only thing I haven't tried from the Basic troubleshooting steps you mentioned was to "restore as new".
    That I did try it tonight (succesffully restored), BUT my problem still exists.
    You mentioned to go in the MAC store > Would they replace it (for free) if they reach the conclusion it's some sort of manufacturer faulty wiring even if it's a 3Gs (as an old model)?
    Would they still if phone had water damage (this I'm just curious - the phone didn't)?

  • Why can't i activate my iphone 3gs after upgrading it to ios 6?

    why can't i activate my iphone 3gs after upgrading it to ios 6?
    It says,
    ''There is no sim card installed in the iphone you are attempting to activate''
    Thanks for your help in advance!
    Kayl07

    There are several common causes for this problem:
    Your security software (Antivirus, firewall, router settings) is blocking access to gs.apple.com, Apple's activation servers. Try temporarily disabling your security applications on your computer.
    You have a redirect in your hosts file that defines a different IP address for gs.apple.com. you must delete all references to gs.apple.com from your hosts file (c:\windows\system32\drivers\etc\hosts, or /etc/hosts on a Mac)
    Your phone is jailbroken or otherwise hacked.

  • Problems after upgrade bios to v4.3 - P67A-GD65

    Hi to everybody,
    I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
    After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
    1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
    in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
    Also there was information about what is new in this version of bios fw as:
    - Enhanced PCI-E display card performance.
    - Improved memory compatibility.
    2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
    so may be there have benn occured a problem that mb can not save edited settings correctly?
    3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
    Thanks for your replies from now on.
    Greetings.

    Quote from: momosala on 02-April-13, 17:54:22
    I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
    And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
    Flash using method 1.
    And tell us if that works.
    thank you for reply that fast i will try asap and tell here.
    Btw, have you ever face a problem as i wrote above?

  • Permission problems after upgrade to 10.5 on early Power PC G5 Tower

    Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
    Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
    The Xserve runs 10.3.9, any help would be greatly appreciated.
    We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

    You really should check things out first before speaking.
    Here are the requirements for 10.5;
    Mac OS X v10.5 Leopard requires:
    A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
    512 MB memory or more
    A DVD drive for installation
    9 GB of available disk space or more
    Some features require a compatible Internet service provider, fees may apply.
    Some features require Apple's MobileMe service; fees apply.
    Allan

  • Battery time wrong after upgrading to new conky

    I use conky and have a section which tells me if the battery is active and if so what's the percentage and how long do i have left until the battery dies.   It was working fine, with the right time estimation until i upgraded to the new conky version a few days ago and now the time estimation for the battery is all wrong.  Now when my battery is like 90 percent full it tells me that there is only around 30 minutes left, but of course the battery will last for much longer and checking powertop estimate I still have around 4 hours left.  Anyone having this problem after upgrading to the newer conky?
    Vincent

    I have a similar problem. There are a number of conky scripts that I use, and they can all be found at http://vredfreak.atspace.com/projects.html , for instance the gmail check, and the weather, and new arch updates.  But after the last update it does not display the whole information, but only a part. So in the e-mail section it only lists "two and a half" and the archlinux new packages section only lists about 6. I have no idea how to fix this.

  • Help solve the problem after restor iphone 5 ios 7 asks email

    Help solve the problem after restor iphone 5 ios 7 asks apple ID
    I Forgot apple ID

    Only one way- to remember it. There is no way around cause it is a new security feature. Better stress your memory.

  • Upgraded to new iOS 8.0.2

    Upgraded to new iOS & iPad keeps freezing, several minutes at a time. Before upgrade I never had even 1 issue with the iPad. Need some solutions for this very irritating & time consuming problem.

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

Maybe you are looking for