Problems converting from MS Word 2007 to PDF using LiveCycle Designer 8

Hi all,
Hope anybody out there could assist me. have a Word document (we are using
Office 2007) and I'm trying to use Adobe Live Cycle Designer 8.0 to convert
a form from word to pdf. However, I get an error message (as shown in the
image below)
Is this a compatibility problem with Office 07?
Appreciate all the assistance.
Thanks and regards.

Hi Peggy,
I found a solution in a tech note from the adobe site:
http://kb.adobe.com/selfservice/viewContent.do?externalId=329044&sliceId=2
2007 is a little tricky, since the instructions it gives are for Office 2003.
In 2007 I went into "Word Options" from that funky button at the top of the Word window.
From there, go into "Add Ins".
At the bottom where it says "Manage" select "Com Add Ins" then click "Go".
You should have a list that includes the Acrobat PDFMaker Office Add In. My Add In file is located at: \\Program Files\Adobe\Acrobat 8.0\PDFMaker\Office\PDFMOfficeAddin.dll
The document finally converted, but it couldn't autodetect any of the form fields I'd placed on the original Word Document (.docx). Still looking for an answer on that one.
Good luck.
Also posted this solution to: https://www.adobeforums.com/webx/.3bc400e4/4

Similar Messages

Converting from a word document to pdf is taking too much space on mac

when i create a word document and save it as a pdf, it usually takes less than 200 KB but when I save the same file on mac, it takes 1.8 MB. Why?

Using what software?

Adobe does not recognize footers in Microsoft Word 2007 to PDF

I have copied and pasted the details, below, from a previous message I have sent out to an assistive technology listserv.
I am encountering this problem with various builds and versions of Adobe Acrobat:
Acrobat X on a Windows Vista 64-bit build (note that this is the best Acrobat I can install on Windows Vista, Adobe Reader XI is not even supported)
Acrobat X on a Windows XP build, sorry, do not know the bit count (it is my work computer so I can't upgrade anything)
Acrobat 9 on a Windows 7 64-bit build.
I have also encountered and checked into whether or not the PDF reads (and does what I want it to) in JAWS 14, latest update (Feb 2013). We encounter the same problem with JAWS and this morning found out that there is a conversion error between Word and Adobe. (See this post, where the ---- are).
Summary, I have spoken with JAWS, put out a support ticket with NVDA via e-mail, spoken with Microsoft, and tried to communicate with Adobe about this issue for help and Adobe is refusing to help. The other places tried everything they knew but they could not get it to work. I even tried to strip all the page numbers from Word and number using Adobe's page numbering feature, but that was not successful either because I cannot use Roman numerals.
I would appreciate any feedback the Adobe Forums can give me; please note that I cannot post a sample document at this time as the only document I have is a private work document (cannot share those by policy, so I will have to make up a fake document if I get the time and energy).
Thank you very much for your time and expertise. The pertient info is above and below in "Original Message" and "Activities section" - the other information is there if you'd like to look. And to provide feedback to Adobe about things I think they could improve, since they will not let me email them directly.
----Original Message----
My question concerns the reading of Footers / Headers in Microsoft Word 2007 and Adobe Acrobat (headers/footers designed in Microsoft Word 2007 and then converted to PDF with "Bookmark" checked in Adobe Acrobat conversion settings).
The document is a word document containing 50+ pages. There are 12 pages of "front matter" that are marked with Roman numerals. Subsequently, the body text of the document has an Arabic number (1, 2, 3, 4, etc.) in the bottom right corner. Footers are used properly in the document. All Table of Contents links, which do link to both headings in the "front matter" and to headings in the body text, are picked up properly. Literately, the only thing not reading on the document are page numbers (the Word Status bar is reading its page numbers, but the page numbers in the footer are not reading).
I then need to convert the document to Adobe Acrobat PDF. Granted, I have a full copy of Adobe Acrobat X available to me, and my various assistive technologies have always functioned better when opened directly in Acrobat (rather than Adobe Reader). So, I set the accessibility options (from Word) properly, asking it to bookmark Headers and Footers as appropriate, thinking that this will pick up the page numbers and make them read as the bottom right corner of my PDF.
All links work in Adobe to navigate by section/heading. All figures are alt tagged. Everything is perfect - but the one thing that NVDA won't read are the page numbers. Visually, the page numbers are there on the document, but NVDA won't pick them up. Additionally, I also changed the appropriate page numbers in Adobe (Page Thumbnail Pane, on the Navigation Pane I believe it is called) - to reflect the section where it is Roman numerals and Arabic numerals. This did not help, and for what it is worth, I cannot get NVDA to voice when I am in this pane, so I don't seem to have a chance of getting the page number info from there.
NVDA reads the document just fine except for the above-mentioned snare. However, when it reads, it will go to the next page, and say, "Page 2 of 54, (page text), Page 3 of 54 (page text)," etc. when I will need it to say Page ii of 54 (page text), Page iii of 54 (page text)," and so on, changing to "Page 1" when the Arabic numbers are used.
I know that the Page Label issue is part of Adobe's issue, with them not releasing the PageLabel aspect. (I have looked through some NVDA tickets). I do not know how to put a "changeset" into my copy of NVDA though, or even if it would help (I have no computer scripting skill). The easy answer would be to upgrade to Adobe Reader XI and see if that helps, but I don't have the ability to put it on every computer I use, and *I need this file to read consistently across multiple versions of Adobe* (including Adobe Reader/Acrobat 9, X, and XI). (This file is also going out to people who may not have the latest version of Adobe, but are also running some copy of NVDA, either a portable or a full install).
Is there any way to pick up the Footers with page numbers voicing in NVDA, and/or have it read the user-editable page number box that is on Adobe's Toolbar (next to the 1 of 54 parentheses). This user-editable box, to jump to page numbers, reflects the Roman numerals I have loaded into the pages of Adobe. When I press Ctrl+Shift+N in Adobe, I can also go to the appropriate page (if I type in iii, it will take me to iii, if I type in 34, it will take me to the Arabic number 34 -- NOT the 34 of 54, which would land me on a different page. And I want to land on the page that has the Arabic 34, so that's functioning fine.
I just need the page numbers in the footer to voice, "Page iii," or "Page iv," or "Page 29," etc. If I could get NVDA to do that, I could say to viewers of this document, "If you are using NVDA, remember to Ctrl+Shift+N to get the GoTo Box, then type in the page number you want if you cannot follow a link or a bookmark." This document is *very* accessible in my opinion with lots of ways to navigate...the only aspect of navigation that isn't being picked up are those footer page numbers!
I do have my Document Formatting settings on the NVDA menu set to "Report Headers," but that does not seem to help in either Microsoft Word 2007 or Adobe Acrobat. I have even switched the page numbers from the footer to the header to see if that would help and it didn't.
----Activities I have done today----
I spent over an hour on the phone today with Freedom Scientific (makers of JAWS) trying to troubleshoot this. We discovered that Footers will not read very well in JAWS and Microsoft Word 2007 (only solution is to stop reading document text and read Virtual Viewer text briefly, then go back out to document text, then back into Virtual Viewer which is NOT an acceptable or accessible solution whatsoever -- too much work for someone trying to read the document) -- and then we also discovered that:
Upon conversion from Word 2007 to .txt file (.docx to .txt), there are no alt tags for the figures in the document, or page numbers.
Upon conversion from Word 2007 to Adobe Acrobat X then to .txt file, every insert of a page number and footer is replaced with the same alt numberpad numerical code: the one that generates female. ♀No wonder JAWS and NVDA are skipping this, neither understand how to communicate it.
On the advice of JAWS Technical Support I contacted Microsoft Accessibility Technical Support and spent an hour on the phone with them. They say that unless Adobe can find a solution, it appears that it is impossible for Microsoft products to read the footer if JAWS was unsuccessful doing what I wanted it to do. The document/footer in question includes about 12 pages of front matter (numbered in Roman numerals) and 44 pages of body text (numbered in Arabic numerals).
I kindly explained to the Microsoft Support Agent that I found this issue hard to believe, although I understood. Sighted folks have the ability to make their documents look quite professional and that is the caliber and quality of documents anticipated from everyone, especially college students graduating from school, or job applicants. That a coding issue prevents the footer from being read properly, except in Edit view, is disappointing. The representative was with me 100% of the way. She completely understood where I came from. And yes, when I am designing the document myself, I know what I put there (or I pretty much do, anyway). But if I recieve a document, it is much harder to tell what is really there or not, or how the page numbers really lay. And this is confusing as heck, believe me.
I then called Adobe Technical Support, after having a brief online chat with them. Granted, I had to leave the chat in the middle because I got interuptted by something that was high-priority, but the woman chatting from Adobe says that chat is only for installation issues, and I will have to pay to open a support ticket. Excuse me? I have paid a hefty sum of money for Adobe Acrobat 9 and Adobe Acrobat X (work paid for the other Acrobat X copy). I deserve this problem to be troubleshooted for free. There was even a statement on the Adobe Acrobat X website that said Acrobat X users didn't have to pay for support, but Reader users did.
----Slight bit of rant and constructive criticism----
In speaking with Adobe Technical Support, I had to wait on hold for 30 minutes before my call was answered, and then I had to consent to being on hold countless times and had to answer, "Yes, I am converting from Word 2007 to PDF using Adobe Acrobat X" at least 6 times. The representative would put me on hold, then ask me the question, then put me on hold again, repeated 6 times over 45 minutes. At the end of 45 minutes (1 hour and 20 minutes of wasted time by now, that I must justify to my employer) - I told the representative I wanted to speak with his supervisor immediately, I did not care if he was trying to fill out a support ticket (and putting me on hold at least 4 more times in 10 minutes while he claimed he was filling out the support ticket) - and finally he put me on hold again and gave me to a very helpful supervisor. Within 6 minutes of speaking with the supervisor the supervisor had my support ticket filled out and I should recieve a call from Adobe within the next 30 minutes if his estimation was right (he estimated two hours, but it's been an hour and a half).
I have yet to know what can be done about my document. Freedom Scientific Technical Support is closed now for the day and I need to work tomorrow and Friday away from the phone. As I stated to Microsoft Accessibility Support, I truly feel that Adobe should read the page footers, every document says that Adobe should be able to read the page footers, and I feel slighted that as a person who uses assistive technology, there is some glitch that isn't making this happen. I am not blaming a specific place per se, except I am a little frustrated with Adobe especially since they have not gotten back to me, and I am frustrated with their customer service. JAWS customer service and Microsoft customer service were both exemparly, and I cannot say enough good things about them. My wasted time with Adobe however, that was disrespect in my opinion. And I certainly will not pay to open a support ticket, and my workplace has a site license. They've paid enough already.
If you've read this far, thank you. I look forward to replies, or at least understanding. And if anyone has ideas, I'd appreciate it very much (yes, I have tried taking the page numbers off and using Adobe's page number feature, but that would not allow Roman numerals. Only Arabic.).

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

I converted a 253 page document from Word 2010 to pdf using Adobe Professional 8. The pdf fike only had 251 pages. Why?

I converted a 253 page document from Word 2010 to pdf using Adobe Professional 8. The pdf fike only had 251 pages. Why?

Word documents don't have a fixed page layout; Word reflows freely if it wants. This isn't normally a problem unless things like typing page numbers is done; avoid that.

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after saving as from word 2007 - I uninstalled Pro X1 and now when I save as from word 2007 to PDF it will

Can anyone help with this - do I have to uninstall Reader and then reinstall?

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after "saving as" from word 2007 - I uninstalled Pro X1 and now when I "save as" PDF from word 2007 to PDF it will save the document as a PDF but will not open the document to display after publishing - I have to got to where the file has been saved to view the new PDF document - this is really annoying - do I have to delete adobe reader and reinstall it - adobe needs to look at this conflict with acrobat pro as I have even gone it to properties and tried to have adobe reader as the default PDF program - the main issue is that I cannot view the PDF after publishing it from word 2007

Have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,. Has anyone had this happen and if so what is the fix?

have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,. Has anyone had this happen and if so what is the fix?

Is it possible to post a sample page some place for us to try out (dropbox or acrobat.com)? Is your Acrobat updated? What version of WORD are you using?

Www and http not displaying in pdf files converted from MS Word

When I convert a Word document to pdf using Acrobat Pro 9.0, the website addresses do not display correctly. For instance, if my document shows www.website.com - then the pdf only displays .website.com. Also, if I have the http://www.website.com - I get ://www.website.com. Please HELP! I remember having this problem when I used the trial version of Acrobat 9.0, but stumbled upon the solution. I can't figure it out this time.

You'll want to ask your question in the Acrobat forum rather than here in the Reader forum.

Not able to convert word file to PDF using Adobe Acrobat 9 Standard

Hi,
I am not able to convert word file to PDF using Adobe Acrobat 9 Standard. When I try to convert, it starts the process and in between I am getting this prompt, as shown in figure below and the conversion process stops. The PDF is not created.
Note: The filename 'Acr85.doc' in the above prompt keeps changing and is random.
I tried clicking Yes, No and Cancel on the above prompt, but the conversion process just stops and PDF is not getting generated.
I am able to create PDFs from web pages. No issues with that. Not working only with Word.
Can someone help me with this.
Thanks,
Vinay Jaassiel Kankipati
Technical Writer

In MSWord please changes the settings as "Adobe PDF" menu => "Change Conversion Settings" goto Tab Bookmark and clicks the option Convert Word Bookmarks. Now you convert the Doc to PDF you can achieve the Bookmark.
Hope this help you
Sudhakar

Printing from the Word to the pdf printer,

Printing from the Word to the pdf printer,
I wanted to print a Word document using the pdf printer but sounds this printer doesn’t provide a dialogue box to choose where to save the printed pdf file. It prints the document but couldn’t know where does the acrobat stick it!
What might be the problem?
Is there some option that controls this behaviour?
Thank you for the help,
Best
Jamal

If you select the properties (or preferences) when right clicking on the Adobe PDF printer, there is a Settings tab (if not select the Advanced button on the general tab) and select the settings tab. There are selections there for requestion the file name and other items related to PDF creation. Sorry if my selections are not clear, I am on the wrong computer to check the correct selections for you, so give it a shot and try various selections until you find the settings.

Acrobat 8 Unable to Search for words after convertion from mircrosoft word

Hi all,
I got a problem with a user using Adobe Acrobat 8 search function. he converted his Microsoft Word document to PDF file. But he is unable to search/find most of the words after convention, even thou the word is right there it will just say it cannot find any matches.
His colleague have acrobat 7 and it has no such problem at all.
Erm is there any setting to for me to change or is there a need to update any patches? One more thing the Word document is make up of textboxs so is this the cause?
I would like some Expert here to give some advise/help here as i cannot downgrade to acrobat 7.
Thanks in advance.

Sorry, I make a mistake. He only can select some of the text document and only those can be searched. What is the cause and any setting to change?
For your Information
1 Our office is using Office 2000
2 Tried Using create Pdf -->Select the file, but the result is still the same. However
3 i tired to use Adobe PDF(printer) I am able to seach everything.
I haven tell the user the workround for no3, but i dun think he wants it and some need to adjust the margins.
Hope the information given to you will help you solve my problem.
Thanks in advance

Convert arabic word document to pdf using Inbound Refinery

convert arabic word document to pdf using Inbound Refinery creating problem. After pdf convert the converted pdf changes to left to right instead of right to left.

In that case you will need to look at the Adobe LiveCycle ES PDF Generator product, as it is licensed and suitable for server-based conversion. Adobe Acrobat can not legally be used in the environment that you describe.

Idea about convert word document to pdf using java api

idea about convert word document to pdf using java api if any one find it mail me at [email protected]

api if any one find it mail me at
[email protected]
What happend to your other mailID :
[email protected] ????
http://forum.java.sun.com/thread.jspa?threadID=639851&
messageID=3756910It received the Spam Of Death. RIP

Is there a free version of Adobe to allow me to convert Excel and word files to PDF's

is there a free version of Adobe to allow me to convert Excel and word files to PDF's

Nothing free no.
At best there is a subscription you can purchase for a relatively low monthly price ($7.50 per month) that can be accessed through Adobe Reader (which is free).

How can you change individual words in a PDF using javascript?

Hi,
I am trying to do some simple text replacement in a PDF file using Acrobat. Specifically, I want to do some simple transliteration of words or partial transliteration. For instance, I would like to change a word like "red" to "ρed". This is to help me get used to the Greek alphabet step by step.
Anyway, I downloaded Acrobat and there is no feature to do a single letter search and replace -- only word replacement. I have a Computer Science degree and decided to investigate the javascript capabilities to see if I can make those a simple letter replacement script. However, I have gotten to the point where I can cycle through every word in the PDF (using functions like getPageNthWord), and I can make a replacement on the string returned using something like: val.replace(/r/, "ρ"). However, I don't know how to replace the word in the PDF file....such as with a hypothetical function setPageNthWord (which does not exit). I have found the online documentation very thin on this, and I am scratching my head. Perhaps, it is something to do with the PDF format that I do not understand. So, is there a way to simply change text of a PDF file, like I am asking? All I am looking for is simple script to change a letter to another across a PDF.
thanks if you can help
Justin

JS can't edit the text in a PDF file directly. There are workarounds, like
using a redaction with overlay text or simply placing a new field or
annotation on top of the old text with the new one, but they are all far
from perfect and won't cause a "reflow" of the document, so if the two
texts are not of the same length the result will look odd. Also there's the
issue of which font to use (font family, color, size, etc.), which JS can't
know so you'll have to tell it.

How to switch from a word doc to another using a keyboard shortcut?

how to switch from a word doc to another using a keyboard shortcut?

Cmd+tilde to switch between open Word documents, or
Cmd+tab to switch between open applications, if that's what you are after?

Problems converting from MS Word 2007 to PDF using LiveCycle Designer 8

Similar Messages

Maybe you are looking for