Problems error when trying to remove live
I couldnt start up any of the programs including audio HQ for my soundblaster li've 5.. I decided to try and reinstall but it kept giving me this error message halfway through the removal.
0x8004020 and then it shuts down.
Now i cant remove the soundblaster and therefor cant reinstall either. Ive tried all the manual remove stuff but that was no good either.
Hope you can help.
Thanks
frankh,
Check the steps in this Knowledgebase article SID682 and see if it helps you.
JasonMessage Edited by Jason-CL on 07-7-2006 05:46 PM
Similar Messages
-
Receiving an error when trying to remove P00 Security role from the user
Hi All,
I am receiving an error when trying to remove P00 Security role from the user.
After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
I click on Select Roles/Groups
On the next screen,
I click on Existing Roles/Groups
ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
Regards,
VineetHi Vineet,
My be your selection is incorrect
Try this
in Applicaiton Area -- Select ALL
Functional Area -
Select ALL
Company -
Select ALL
Role/Profile/Group Names --- Give p00* and execute the report
if you give only p00 it wont give any result
Hope this helps
Thank you,
Kishore -
Error when trying to remove logical systems using SALE
Hello,
We are trying to remove obsolete entries from the logical system name table using transaction SALE. When doing this, for some entries, I am getting a message:
The logical system GB1MATDEV is still used in distribution model SUBSYSTEMS (client 010).
Confirm that the logical system GB1MATDEV is really no longer used. Delete it first from distribution model SUBSYSTEMS (client 010), then delete it here.
So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
Action cannot be carried out on the nodes selected.
It seems that I am stuck. Any ideas on how to resolve this?
Regards,
Michael DubeDear Michael
"So in client 010, I tried to delete the entry from the distribution model (t-code BD64), and I get another message:
Action cannot be carried out on the nodes selected."
You need to delete the lowest possible node first, if you select the top node you get this type of error.
You need to expand the node and then delete the smallest part of the node first and work your way up until you can delete the node itself.
<removed_by_moderator>
Kind regards
Tom -
I'm having this error when I try to remove a blob that was used for a VM in the pass, the VM was already removed and there's nothing using that blob nor even the storage account wh ere the blob is stored.
There is currently a lease on the blob and no lease ID was specified in the request. RequestId:0a441667-0001-0044-7861-bc17ef000000 Time:2014-12-18T15:53:04.5315752Z
I'm trying to delete the blob from the current web interface, and I haven't found a way to specify a lease ID or check what lease could it has.
Thanks in advanceHi jruiz,
When you delete a Virtual Machine on the Management Portal, the "Disk" resource used to mount the Virtual Machines VHD is kept.The "Disk" resource is responsible for mounting the blob for the VHD file, so it can be attached to virtual
machines as an OS Disk or Data Disk. It will continue to hold a lease on the blob for as long as it exists.
So you need to delete the "Disk" resource to break the lease on the blob.
Please refer to the link about how to delete disk resource to break lease on the blob.
http://blogs.msdn.com/b/mast/archive/2013/02/05/iaas-unable-to-delete-vhd-there-is-currently-a-lease-on-the-blob.aspx
Best Regards,
Kevin Shen. -
Installation Problem error when trying to create WSDL resource in OSB proje
Hi everybody!
I'm getting following error while trying to create a WSDL resource in OSB console:
Caused By: com.bea.wli.sb.common.UserException: Diagnostics for WSDL send-sms/resources/teasdf
WARNING: <0> Installation Problem??? Couldn't load messages: Can't find bundle for base name org.apache.xmlbeans.impl.regex.message, locale en_US
at com.bea.wli.sb.resources.wsdl.helpers.WsdlEntryHelper.createEntry(WsdlEntryHelper.java:644)
at com.bea.wli.sb.resources.wsdl.helpers.WsdlEntryHelper.createEntry(WsdlEntryHelper.java:687)
at com.bea.wli.sb.management.configuration.WsdlConfiguration.createEntry(WsdlConfiguration.java:64)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.alsb.console.support.ConsoleSideMBeanInvocationHandler.__invoke(ConsoleSideMBeanInvocationHandler.java:113)
at com.bea.alsb.console.support.ConsoleSideMBeanInvocationHandler.invoke(ConsoleSideMBeanInvocationHandler.java:71)
at $Proxy187.createEntry(Unknown Source)
at com.bea.alsb.console.resources.wsdl.WsdlRepositoryHelper.createEntry(WsdlRepositoryHelper.java:183)
at com.bea.alsb.console.resources.wsdl.actions.EditWsdlAction.execute(EditWsdlAction.java:88)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
I couldn't find anything related to this error in this forum or the web.
Thank you in advance,
Daniel.Can you post your WSDL here please.
-
Bw problem/error when trying to load data
hi experts i suddenly have this issue when trying to load data anywhere in my bw system (psa,ods,infocubes) i get the following abap runtime error:
SNAP_NO_NEW_ENTRY
runntime error,short dump could not be written
and bellow that it generally says that SNAP is full and i need to create more free space
any suggestions what i should do?
ps.i ve tried the re-organize option and no luck, i need to take more drastic measures
thankscheck the below thread...
[SNAP_NO_NEW_ENTRY; -
Error when trying to steam live
We are currently running Windows media streaming servers and
would like to start streaming live flash from these servers. I have
downloaded and installed the Flash Media Development Server 3,
Flash Media Live Encoder 2.5, and Flash CS3 Professional.
We have successfully configured a web server on the Windows
machine and are able stream progressive flash. However we do not
want the media content to be cashed on the client side. We were
under the impression that the Flash CS3 was able to stream live
with out the option of being progressive.
The issue is that for some reason it does not recognize the
localhost/file. I have also tried to insert an ip address in place
of the localhost and always the same result. failed to load FLV.
Here is the strange thing if i try to create a flv file using the
Flash Media Live Encoder 2.5 and then make the source
rtmp://localhost/vod/YourFLVName it does not work. If i use the
sample flv provided by the cs3 progam it dose work.
The other thing is that the live content will be coming from
a remote location. For now we are just hooking up a web cam to one
of the servers to see if we can get it to steam but with no
success.
Here are the steps I am following
1. Open Flash Media Live Encoder. When it opens, don't change
the video or audio encoding options.
2. In the Output area, select Stream to Flash Media Server.
As soon as you do this, you will notice the URL is automatically
set to the live folder in your copy of Flash Media Server 3.
3. Select the text in the Stream input text box. This is the
name of the file that will be output. The default name is
livestream but you can change it to anything you wish.
4. A really neat aspect of Flash Media Live Encoder is its
ability to save a copy of the broadcast. Select Save to File, click
the Browse button, and save the capture to your vod folder or
another location. This is a handy method of creating archives of
your broadcasts.
5. At this point, you are almost ready to start your
broadcast (see Figure 5). Don't quit Flash Media Live Encoder yet.
I make it to 4 and then get the error Failed to load the FLV:
1. Open Flash CS3 and create a new ActionScript 3.0 document
that is 640×480 pixels.
2. Drag a copy of the FLVPlayback component to the Stage and
set its dimensions to 640×480.
3. Select the component on the Stage and click the Parameters
tab.
4. Double-click the source parameter and enter
rtmp://localhost/live/livestream. Click OK to close the dialog box.
Even though you have told Flash where to find the live
stream, you haven't told Flash to play the live stream.
5. Select the component on the Stage. In the Property
inspector, give it the instance name of myVideo.
6. Add a new layer to the movie and name it actions.
7. Select the first frame of the Actions layer and press F9
to open the Actions panel.
8. Click once in the Script pane and enter:
myVideo.isLive = true;
The isLive property of the FLVPlayback component can have
only two values: true or false. This property works only if the
feed is streaming from Flash Media Server. If you were not using
Flash Media Server—that is, progressively downloading the
video from an HTTP address—and you set isLive to true, then
Flash would simply ignore the ActionScript and nothing would
happen.
9. Close the Actions panel and select File > Publish
Settings. When the Publish Settings dialog box opens, select Flash
(.swf) and HTML (.html) in the Type list.
10. Click Publish. When it finishes close the dialog box,
save the Flash file and quit Flash.
Broadcasting a webcam feed
Having created the "feed" using Flash Media Live Encoder and
created the SWF file that receive that feed in Flash CS3, you can
put your webcam to work and create a broadcast:
1. Return to Flash Media Live Encoder and click the Connect
button under the Stream input. This creates the connection between
FME and the live folder in your local copy of Flash Media Server.
When the connection is made, the button name changes to Disconnect.
2. Click the Start button.
3. Open the HTML page created in Flash and open it in a
browser. There will be a short delay but there you are, live and in
living color (see Figure 6).
4. When you have finished, return to Flash Media Live Encoder
and click the red Stop button. Quit the browser and close Flash
Media Live Encoder.frankh,
Check the steps in this Knowledgebase article SID682 and see if it helps you.
JasonMessage Edited by Jason-CL on 07-7-2006 05:46 PM -
Icotact gives me a memory error when trying to remove duplicates
Running the latest IOS. I launched icotact. then went in to Card menu, then look for duplicates. It took forever to find the duplicates and when it finally did I had about 8 duplicates. I then hit the merge duplicates button and the computer told me it has run out of system memory.
I have 8 gigs of ram in my system. I tried it a second time but on the second time i did a system restart same problem. Any thoughts?Oh, you mean Contacts? The contact management app?
I think that something is corrupted in the Contacts database which may be causing the problem you see.
Try deleting the index files which will rebuild the database.
Backup the Contacts by going to File menu and choosing Export to Contacts Archive
Close Contacts
Open Finder to this location
~/Library/Application Support/AddressBook
If you triple-click the above line, you can copy it and paste into Go To Folder (cmd-shift-g) in the Finder Go Menu.
You should see three files named with address book-v22.abcddb
AddressBook-v22.abcddb
AddressBook-v22.abcddb-shm
AddressBook-v22.abcddb-wal
Delete all three of them, then open Contacts.
It will take a moment to rebuild the index, but you should see all of you cards back.
Try merging the duplicates again.
If anything goes wrong, you can restore from the backup you made by double-clicking on it in the Finder. -
using Acrobat X (10) Professional?
There are no layers, attachments, signatures, or security settings on the PDF.Dear Siva
Thank you for your reply. I did not know that. Although I often use an alias, as I was just figuring out how to do the query I didn't do this.
Is this the case with many of the GeoRaster related select statements? Does anyone know the reasons why this needs to be the case?
Kind regards
Tim -
i get a assertion error when trying to up load ,lightroom have follow the instructions on the adobe site and it still does not work
and ideas on how to fix the problem
tk
bigguy1965Hi,
Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
To check if Windows 7 Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
The basic information about your computer page will open.
To check if Windows XP Service Pack is already installed, follow the below steps:
Click the Start button , right-click Computer, and then click Properties.
Click System and Service Pack Information will be listed
Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
Thanks
Piyush -
Error received when trying to remove a BW bookmark
Hello All,
When trying to remove a BW bookmark with hierarchy for the Month/Year the following error is received: "System error in program SAPLRRK0 and form SORTING_PRUEFEN_01-04-"
Please advise.
Regards,
KeithNot answered
-
I am getting an error when trying to download the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege to make changes. I have not had this problem before
Solution:
Open Disk Utility.
Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive. -
FATAL Error... When trying to remove Apple Mobile Device Support (AMDS) on my windows xp. I tried to update iTunes to update my iPhone software and it told me to uninstall iTunes and AMDS for a newer version. Now I get a fatal error and I can't sync my phone. What should I do?
FATAL Error... When trying to remove Apple Mobile Device Support (AMDS) on my windows xp.
We've made some progress with some of those in recent days, Stop. It looks like (with some of them), the trouble is caused by trouble with the HKEYCURRENTUSER registry keys associated with your usual XP user account.
If that's what is afoot, the following technique may be of some assistance.
Head into your User Accounts control panel and create a new user account with full administrative rights. Log out of your normal account and log into the new account. (Don't use fast user switching to move between accounts.)
Inside the new account, head into your Add or Remove Programs control panel, and attempt to uninstall AMDS from there.
Does the uninstall go through without the fatal error in the new user account?
If so, *staying in the new user account,* do a complete uninstall of iTunes and related componentry as per:
[Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP|http://support.apple.com/kb/HT1925]
(You'll need, in particular, to do the reinstall of iTunes from inside the new account. Experience of the last two cases of this indicates that if you try the reinstall from inside the usual user account, AMDS just silently fails to install.)
If everything seems to have reinstalled correctly, log out of the new account, and log back into your usual account. Try launching iTunes in your usual account. Does it launch properly in there now? -
I am getting an error when trying to add a caption.
I get the following error when trying to add a caption to a photo. "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media." I am running Windows 7 Pro. The files are located on my c:. The drive has 274 GB Free so space isn't an issue. I have tried deleting a file and readding it to the same catalog and still the same problem. I have copied the file to the desktop and cataloged it from there and the error went away.
If i check on the folder attibutes it is set to read-only but the desktop folder is as well. If i try to remove the read only it only resets itelf to read only again. Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.I was able to get it to work. The root folder which held the pictures had a lock on it through windows 7. Even though the drive was shared, I still had to go into the folder properties and share it with everyone. Once i got the lock off and rebooted I was able to add captions again.
-
I am getting an error when trying to download new iTunes software to new Windows 7 computer.
I am getting an error when trying to download iTunes to a new Lenovo laptop with Windows 7. Says... An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="86". HRESULT:0x80070BC9
Please help if anyone knows how to fix or bypass this problem.These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time?
Maybe you are looking for
-
Finder/sql - scalar functions
Hi , I am running WLS7sp1, oracle 8.1.7 with the classes12.zip drivers I have a finder method as follows: <query> <query-method> <method-name>findDistinctDrivenFields1</method-name> <method-params>
-
In Milestone billing WBS elet field not visible in Account assignment tab
Hi Gurus, Could you pls let me know how to make WBS element field to display in Account assignment tab (Item details of Sales order). During Milestone billing in Billing plan tab WBS element is getting displayed where in for Account assignment tab it
-
I am new to Apple and I don't know all the ins and outs yet. I thought when I downloaded Lion OS that was my MS Office but for MacBook. Why do I need Lion and do I have to download MS office to get any word processing capabilities and excel capabilit
-
Identity problems with Outlook
I just installed Office and Outlook to my MacBook Air (my old MacBook Pro was stolen). I've managed to get everything at place from my backup, but when I try to open Outlook I get the following notification (translated from Swedish): It's not possibl
-
CC & CS4 - I'm doing a clean install of Mavericks
I'm doing a clean install of Mavericks on my Macbook Pro soon - no particular reason, just time to clean out the clutter. Currently I have both CS4 and CC on my laptop but don't plan on reinstalling CS4 after the clean install. However, if somewher