Problems getting laptop started after ipod load

I downloaded iTunes from the Apple website and my machine would barely restart. I restarted my computer in Safe Mode and was able to delete the iTunes directory. Problem resolved. I then made a horrible mistake of starting my laptop with the iPod cd in the drive. Now I have the same behavior...machine barely starts up, will finally get to the desktop after an hour or so, but I cannot do anything, taks manager shows little to no processes, but I am not able to do anything on computer. Started in Safe Mode again but nothing iTunes or iPod to delete. Can anyone help?

I just got off the phone with Apple. Their response is that something was wrong with my computer to start with or I wouldn't be having this problem. My machine is W2k SP4 with all the critical updates prior to loading iTunes. This matches the requirements identified by Apple. But my computer is the one with the problem.
So I guess all the rest of you who are having problems really just had an unstable computer like me, before you attempted to load ITunes.
Completely unbelievable that there is no ownership of the problem at Apple.

Similar Messages

Can't get laptop to recognize iPod: tried all "solutions".

I have tried all the solutions here and I still can’t get a single iPod to properly work with my computer. I’ve pretty much come down to the conclusion that the only way I can get an iPod to work is to get a whole new PC.
Granted I have an “ancient” four-year-old Dell Inspiron 4000 laptop with only one USB 1.1 port. However I have updated it and am running with 512MB of RAM, Windows XP Home and have added a Comp USA USB 2.0 PC Card. Through this card I have successfully connected a number of items with no problem.
• Router
• Cable Modem
• Logitech Harmony remote
• Canon SD450 camera
• HP laser printer
• Zen Micro MP3 player
• Flash drives
Some items are USB 1.1 and some are 2.0. But I’ve had as many as four items running at the same time and had no problem.
However, I can’t get a single friggin’ iPod to work properly!
When I connected the first iPod to the USB2.0 ports on the card (after installing the software) the system would not recognize it. I let it charge overnight and came back to an iPod that was probably pretty close to catching on fire. The screen was bright white and the whole thing was so hot I could barely pick it up. I returned that one.
With the second one I have a little more success. After uninstalling the iPod software I went through a “fresh” install like I had a new one. The computer recognized the second one so far as to assign it a drive letter. However the iTunes and iPod updater software would not recognize the iPod being attached.
Based upon Apple support articles, information from this and other iPod forums I tried all of the following “solutions”:
• Tried all four USB 2.0 ports and the one USB 1.1 built-in port: no luck.
• Restarted the laptop
• Reset the iPod
• Uninstall and reinstall software 4 times
• Went into the hardware power settings for the USB ports and changed the settings
• Unistalled and reinstalled all hardware.
• Download and install new USB drivers
• Checked: I have latest version of iTunes
• iPod service is running
• reinstalled COM interface
• removed iTunes
• Emptied temp directory
• Clean up iTunes installer file
Still nothing. Couldn’t even get the iPod to power uo.
Went back to the Apple store to exchange after they couldn’t get it to power up.
As recommended I tried a few other USB 2.0 PC cards that were on the approved list. Including the expensive ($50) Belkin card that Apple claimed had been tested to work okay with the 5th gen iPod.
The only options I see
• wipe the hard drive, reinstall XP and all my software an starting fresh
• buy a whole new “current’ desktop PC.
So am I just pooched?

Granted I have an “ancient” four-year-old Dell
Inspiron 4000 laptop with only one USB 1.1 port.
However I have updated it and am running with 512MB
of RAM, Windows XP Home
So you installed Windows XP Home but did you install SP2!!!
Remember Ipods require SP2 If you have Windows XP Home Edition!!!!

My iPad keeps pausing when I try to watch utube video Started after I loaded iCloud on Mac. I'm wireless. Any connection or fix?

My wireless iPad2 keeps pausing when trying to view utube. Just started since I loaded lion ox on my Mac. Is there any connection or fix ? Also having trouble with FaceTime on iPad now

Yes connected via wireless to iMac. Purchased new router after TW determined it was router. Still having probs with wireless dropping though modem & router appear to be working. Have to restart imac every time to get wireless to pick up again.

Problems getting whole library on ipod

hello.
I am having problems with my ipod. My library has 3056 items in it and when I update my ipod only 3005 songs are on it. It wont update everything in my library to my ipod. it also wont ut my videos on my ipod. Why is this happening? What can I do to fix it?
please help me.

I also have a similar problem only on a smaller scale. I have an iPod color 40GB. I will get a few songs randomly in my library that will not sync to my iPod. Currently I have 5413 songs in library and 5410 in my iPod. This difference will grow slowly. I have all mp3 files, no protected files. Widows explorer sees all 5413 mp3 files. No 0byte files. I can see no reason for why these 3 mystery files will not sync. I have had this before and never solved or seen a solution! My only solution in the past was to delete my library on my pc and copy the iPod files back to pc and start again. I'd love to know what songs iTunes or the ipod doesn't like!?

Problems getting music on to iPod.

I hook it up, and then I read it and watch it update, and find the music in the library of the iPod, but it won't show up to play or even see.
Any one have any info, or the same problem?

Ever since I downloaded iTunes 7, I can't get tunes on to my Nano. VERY frustrating!! I just downloaded the new 7.0.1(7) hoping they fixed the problem, but no good. Even though I deleted over one hundred songs, it just keeps saying that I do not have room, even for one song. Then, AFTER THAT, when I tried to add a new long playlist, it said the same thing, then it transfered just a few tunes on the playlist. This is very weird. How can I go back to iTunes six? Why should we keep upgrading anyway, if things are working fine???@&!T%??
PLEASE HELP!!
powerbook G4 Mac OS X (10.4.8) Nano
powerbook G4 Mac OS X (10.4.8) Nano

Help! Having a problem getting music off of ipod onto new itunes

My old laptop had a itunes downloaded on it, but I recently got a new laptop and i just downloaded itunes onto the new laptop. The problem I am facing is that I can not figure out how to get the music i already have on my ipod onto the itunes i just downloaded. HELP

You are having problems because iTunes is not designed to work that way. Syncing is one way, computer to device. Copy the whole iTunes folder from your old laptop or your backup (you do have one, don't you?) to the same location on the new one. If you no longer have the old laptop you will have to use third party software to copy just media files, then rebuild all yoru playlists, ratings, playcounts, etc. by hand.
Any items you purchased from Apple can be downloaded to iTunes from the iTunes store again, if that feature is available in your ocuntry.

Problems Getting to Sites After Installing SP2 and Dec CU

Our setup was running great for the last year and a half. We decided to install SP2 and the CU’s that had been released since. The updates and CU installs went fine. However, after the install we are having problems with users being prompted
with credentials. When going to any of the sites (not AAM) our users can get in fine. However, if we browse to one of the other sites we are continually prompted for credentials and can’t get in. For example, if I go to
App1 I get in fine but, when I go from App1 to App2 , I continually get prompted for credentials. If I start by going to App2 I get in fine but continually get prompted for credentials when going from App2 to App1. In addition, if I go to
any of the AAM’s I get in just fine. However, if I try to go to any other site after this, I get the credential prompts. It seems like an issue with the session.
I have looked through the event logs, used the trace utility, fiddler and tried changing the auth setting s with no luck, no apparent problems in the logs or detail.
Any advice or help would be appreciated. Again everything worked until we installed the updates
We are using claims authentication with windows NTLM. Our SharePoint server’s host name is SP01.company.com. We have three SharePoint 2010 applications. The SharePoint Install is on Windows 2008R2, Is a virtual machine, running in a Windows 2012 Hyper-V
cluster with 2012 Nic Teaming
App1 – using standard port 80 –site with simple content - No AAM
Default: Sp01.company.com
App2 – site configured with simple content
Default: Sp01.company.com:9701
Intranet: docs.company.com – AAM for Sp01.company.com:9701
App3 – team sites and simple content.
Default: Sp01.company.com:9882
Intranet: teamsites.company.com –AAM for
Sp01.company.com:9882

Hi Cybersoul1
have you run the PSConfid Wizard after SP2 and the CU’s?
psconfig.exe -cmd upgrade -inplace b2b -wait
please make sure that this has to be run on call the server.
reference : http://blogs.technet.com/b/sbs/archive/2011/05/24/you-must-manually-run-psconfig-after-installing-sharepoint-2010-patches.aspx
Thanks, ShankarSingh

Problem, radio dont starts after update to Mozilla Firefox 12

I have problem with a radio in a website after the update of Mozilla Firefox 12 When i log in the webste the radio dont starts, when i use the Internet Explorer the radio starts. Check the picture
http://img859.imageshack.us/img859/3150/egweggwe.png

You're welcome

Hello! Recently encountered a problem with OSX start, after an emergency shutdown macbook

Hello! Recently encountered a problem after an emergency shutdown macbook (it was shut off due to low battery) and now I can not boot in OS X, the fact that I can't see what became of OSX, so as I have in parallel is Windows that is loaded instead of OS X (video here https://www.youtube.com/watch?v=2oSTZhaVy9g sorry for the quality, with YouTube's nothing you can do) When you select a disk partition with OSX in Windows, via Bootcamp the same. What could it be? Maybe there is a function of the last successful run? I have the opportunity to the entire disk with OS X, from file system to programs. Moreover, OS X has remained 1password. I would be very grateful for help, because the answer is never found. I have MBP 371 ll/a with OSX 10.9.5.

Yes, I can see the partition with OS X and Windows, better watch the video, it demonstrates this point.

VLC problem - won't start after installing skins

Hi everyone,
after installing some skins from the vlc website, I run into the following problem: VLC starts with two instances, CPU jumps to 100%, then VLC just dies. I've deleted the skins, changed the gtk theme, reinstalled vlc and did about a million other things, but the problem persists. Running vlc or cvlc from the terminal gives me the following message:
[0x14db9c8] skins2 interface: skin: subX author: Martin Poehlmann
[0x231ebd8] dummy interface: using the dummy interface module...
So apparently it still starts with two instances, but I have no idea why. There is no subX skin in the skins folder, everything looks clean. Any ideas would be really appreciated, as this is for me the best dvd player. Thanks!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Problems getting google analytics after successful implementation

Ok, so I pasted the analytics code into the page properties meta data.
I am 99% sure this has been done correctly because I went to my site, and viewed page source.
The tracking code is in the header.
So my problem is that when I go onto google analytics, it isn't collecting any data. I've tried accessing the site from multiple computers.
I just created my google analytics account about an hour ago...that's the only other variable I can think of.
Help is much appreciated!
Here's the link to my site if it helps:
www.betterhappy.co
Thanks!

From - https://support.google.com/analytics/answer/1008083?hl=en
It can take up to 24 hours for the Google Analytics servers to update after you make a change to your tracking code, so if you’ve recently completed or changed your set up, wait before you check to see if it’s working.
Thanks,
Vinayak

Problem getting an LDAPContext after authenticating via Kerberos

Hi,
I am trying to create a Java program that can query an Active Directory server using the currenlty logged in Windows user's credentials to authenticate via LDAP.
I am getting the following error in my output when trying to create the LdapContext object.
GSSException: No valid credentials provided (Mechanism level: Failed to find any Kerberos Ticket)
The full output is as follows
Debug is true storeKey false useTicketCache true useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
KinitOptions cache name is C:\Documents and Settings\Administrator.THALES-3D8PWWDM\krb5cc_AdministratorAcquire default native Credentials
Obtained TGT from LSA: Credentials:
[email protected]
server=krbtgt/[email protected]
authTime=20090618162927Z
startTime=20090618162927Z
endTime=20090619022927Z
renewTill=20090625162927Z
flags: FORWARDABLE;RENEWABLE;INITIAL;PRE-AUTHENT
EType (int): 23
Principal is [email protected]
Commit Succeeded
Subject:
     Principal: [email protected]
     Private Credential: Ticket (hex) =
0000: 61 82 03 BC 30 82 03 B8   A0 03 02 01 05 A1 0A 1B a...0...........
<REMOVED>4   8A 8C BE 6B FD 65 5D 2F .R..t#@d...k.e]/
Client Principal = [email protected]
Server Principal = krbtgt/[email protected]
Session Key = EncryptionKey: keyType=23 keyBytes (hex dump)=
0000: C0 62 F6 3F 5C 29 F4 7B   C1 FC AB A0 77 D1 E7 E0 .b.?\)......w...
Forwardable Ticket true
Forwarded Ticket false
Proxiable Ticket false
Proxy Ticket false
Postdated Ticket false
Renewable Ticket true
Initial Ticket true
Auth Time = Thu Jun 18 17:29:27 BST 2009
Start Time = Thu Jun 18 17:29:27 BST 2009
End Time = Fri Jun 19 03:29:27 BST 2009
Renew Till = Thu Jun 25 17:29:27 BST 2009
Client Addresses Null
Found ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri Jun 19 03:29:27 BST 2009
KinitOptions cache name is C:\Documents and Settings\Administrator.THALES-3D8PWWDM\krb5cc_AdministratorAcquire default native Credentials
Obtained TGT from LSA: Credentials:
[email protected]
server=krbtgt/[email protected]
authTime=20090618162927Z
startTime=20090618162927Z
endTime=20090619022927Z
renewTill=20090625162927Z
flags: FORWARDABLE;RENEWABLE;INITIAL;PRE-AUTHENT
EType (int): 23
Found ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri Jun 19 03:29:27 BST 2009
GSSException: No valid credentials provided (Mechanism level: Failed to find any Kerberos Ticket)
     at sun.security.jgss.krb5.Krb5InitCredential.getInstance(Unknown Source)
     at sun.security.jgss.krb5.Krb5MechFactory.getCredentialElement(Unknown Source)
     at sun.security.jgss.GSSManagerImpl.getCredentialElement(Unknown Source)
     at sun.security.jgss.GSSCredentialImpl.add(Unknown Source)
     at sun.security.jgss.GSSCredentialImpl.<init>(Unknown Source)
     at sun.security.jgss.GSSCredentialImpl.<init>(Unknown Source)
     at sun.security.jgss.GSSManagerImpl.createCredential(Unknown Source)
     at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
     at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
     at com.sun.security.sasl.gsskerb.GssKrb5Client.evaluateChallenge(Unknown Source)
     at com.sun.jndi.ldap.sasl.LdapSasl.saslBind(Unknown Source)
     at com.sun.jndi.ldap.LdapClient.authenticate(Unknown Source)
     at com.sun.jndi.ldap.LdapCtx.connect(Unknown Source)
     at com.sun.jndi.ldap.LdapCtx.<init>(Unknown Source)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(Unknown Source)
     at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(Unknown Source)
     at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(Unknown Source)
     at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(Unknown Source)
     at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
     at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
     at javax.naming.InitialContext.init(Unknown Source)
     at javax.naming.InitialContext.<init>(Unknown Source)
     at javax.naming.directory.InitialDirContext.<init>(Unknown Source)
     at com.thalesgroup.planit.ldap.LDAPAction.performLDAPOperation(Main.java:87)
     at com.thalesgroup.planit.ldap.LDAPAction.run(Main.java:66)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Unknown Source)
     at com.thalesgroup.planit.ldap.Main.main(Main.java:46)
javax.naming.AuthenticationException: GSSAPI [Root exception is javax.security.sasl.SaslException: GSS initiate I am running this using the following VM arguments
-Djavax.security.auth.useSubjectCredsOnly=false -Dsun.security.krb5.debug=true
Finally my jaas config file is as follows
fsta {
     com.sun.security.auth.module.Krb5LoginModule required
debug=true client=false useTicketCache=true;
com.sun.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required useTicketCache=true;
};I am running this locally on the AD server (running Windows Server 2003).
Does anybody know how I can get rid of the exception and create an authenticated LdapContext?
Any suggestions would be greatly appreciated.
Thanks
Graeme

My java source is as follows (its a modified example I found online)
import java.util.Hashtable;
import javax.naming.Context;
import javax.naming.NamingEnumeration;
import javax.naming.NamingException;
import javax.naming.directory.Attributes;
import javax.naming.directory.DirContext;
import javax.naming.directory.InitialDirContext;
import javax.naming.directory.SearchControls;
import javax.naming.directory.SearchResult;
import javax.security.auth.Subject;
import javax.security.auth.login.LoginContext;
import javax.security.auth.login.LoginException;
import com.sun.security.auth.callback.TextCallbackHandler;
public class Main {
    public static void main(String[] args) {
    java.util.Properties p = new java.util.Properties(System.getProperties());
    p.setProperty("java.security.krb5.realm", "fsta.com");
    p.setProperty("java.security.krb5.kdc", "192.168.1.10");
    p.setProperty("java.security.auth.login.config", "C:\\jaas.conf");
    System.setProperties(p);
    // 1. Log in (to Kerberos)
    LoginContext lc = null;
    try {
            lc = new LoginContext("fsta", new TextCallbackHandler());
    // Attempt authentication
    lc.login();
    } catch (LoginException le) {
    System.err.println("Authentication attempt failed" + le);
    System.exit(-1);
    Subject subject = lc.getSubject();
    System.out.println(subject.toString());
    // 2. Perform JNDI work as logged in subject
    Subject.doAs(subject, new LDAPAction(args));
    // 3. Perform LDAP Action
    * The application must supply a PrivilegedAction that is to be run
    * inside a Subject.doAs() or Subject.doAsPrivileged().
    class LDAPAction implements java.security.PrivilegedAction {
    private String[] args;
    private static String[] sAttrIDs;
    private static String sUserAccount = new String("Administrator");
    public LDAPAction(String[] origArgs) {
    this.args = origArgs.clone();
    public Object run() {
    performLDAPOperation(args);
    return null;
    private static void performLDAPOperation(String[] args) {
    // Set up environment for creating initial context
    Hashtable env = new Hashtable(11);
    env.put(Context.INITIAL_CONTEXT_FACTORY,
    "com.sun.jndi.ldap.LdapCtxFactory");
    // Must use fully qualified hostname
    env.put(Context.PROVIDER_URL, "ldap://192.168.1.10:389");
    // Request the use of the "GSSAPI" SASL mechanism
    // Authenticate by using already established Kerberos credentials
    env.put(Context.SECURITY_AUTHENTICATION, "GSSAPI");
//    env.put("javax.security.sasl.server.authentication", "true");
    try {
    /* Create initial context */
    DirContext ctx = new InitialDirContext(env);
    /* Get the attributes requested */
    //Create the search controls
    SearchControls searchCtls = new SearchControls();
    //Specify the attributes to return
    String returnedAtts[]={"sn","givenName","mail"};
    searchCtls.setReturningAttributes(returnedAtts);
    //Specify the search scope
    searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE);
    //specify the LDAP search filter
    String searchFilter = "(&(objectClass=user)(mail=*))";
    //Specify the Base for the search
    String searchBase = "DC=fsta,DC=com";
    //initialize counter to total the results
    int totalResults = 0;
    // Search for objects using the filter
    NamingEnumeration answer = ctx.search(searchBase, searchFilter, searchCtls);
    //Loop through the search results
    while (answer.hasMoreElements()) {
            SearchResult sr = (SearchResult)answer.next();
        totalResults++;
        System.out.println(">>>" + sr.getName());
        // Print out some of the attributes, catch the exception if the attributes have no values
        Attributes attrs = sr.getAttributes();
        if (attrs != null) {
            try {
            System.out.println("   surname: " + attrs.get("sn").get());
            System.out.println("   firstname: " + attrs.get("givenName").get());
            System.out.println("   mail: " + attrs.get("mail").get());
            catch (NullPointerException e)    {
            System.err.println("Error listing attributes: " + e);
    System.out.println("RABOTIII");
        System.out.println("Total results: " + totalResults);
    ctx.close();
    } catch (NamingException e) {
    e.printStackTrace();
}Edited by: GraemeK on Jun 18, 2009 11:56 AM

I have problems getting apps on my ipod touch, even the free ones and when i try to get it, it says this ID never purchased something before please review...

so i thought that i had to insert a payment methode even if i just wanted the free apps but then i heard from my friends that they didn't had to do that and they still get their apps...? please help this is really gettig me nerveous ...

You need a payment method on your Apple ID to use the store. Even if you're not planning to download any paid apps, you still need a method linked to your account.
I''m not sure when it changed, but I believe you used to be able to download free apps without a payment method. Maybe your friends Apple IDs are from those days.

FaceTime-problem getting it started :(

Tried using FaceTime on my MacBook Air for 1st time. Signed in w/ my apple id & password but got a message saying, "The server encountered an error processing registration. Please try again." My internet connection is strong. Would REALLY like to wish my relatives in Ireland a Merry Christmas via facetime. Thx for any help, and happy holidays!

Hi there,
To do this, you need to use an if statement with conditions set for the timecode that references where the timeline position is during the looping process, in combination with sym.playReverse();
I made a sample project for you to reference. (For right now, the only button that works is the first gray button, and it controls the first image that appears in the slideshow). Click the image below to download the image.
https://creative.adobe.com/share/70b0b985-b447-4098-97f4-d56a0aced802
Let me know if you need further clarification. It's a little tricky to wrap your brain around, but once you get it nailed down for the first image it's simple. : ) Also, remember I used timecodes in my code in the project, you can feel free to use labels to help make sense of things in your own project.
I hope this helps! : )

Problem getting correct data from MS Access after doing an Update

Hi all,
I have a problem getting correct data after doing an update. This is the scenario
I am selecting some(Eg: All records where Column X = �7� ) records and update a column with a particular value (SET Column X = �c� ) in all these records by going through a while loop. In the while loop I add these records to a vector too, and pass it as the return value.
After getting this return value I go through a for loop and get each record one by one from the DB and check if my previous update has actually happened. Since No errors were caught while updating DB, I assume all records are updated properly but my record set shows one after another as if it has not been updated. But if I open the DB it is actually updated.
This does not happen to all records, always it shows like this
1st record     Mode = �c�
2nd record     Mode = �7�
3st record     Mode = �c�
4nd record     Mode = �7�
9th record     Mode = �c�
10th record     Mode = �7�
I am relatively new to java and this is someone elses code that I have to modify,So I am not sure if there some thing wrong in the code too
//Here is the method that gets records and call to update and add to vector
public static Vector getCanceledWorkOrders() throws CSDDBException{
//Variable declaration
try {
    objDBConn = DBHandler.getCSDBCon();
    strSQL = "SELECT bal bla WHERE [Detailed Mode])=?)";
    objStmt = objDBConn.prepareStatement(strSQL);
    objStmt.setString(1, '7');
    objWOPRs = objStmt.executeQuery();
    while (objWOPRs.next()) {
     //Add elements to a vector by getting from result set
      //updating each record as PROCESSING_CANCELLED_WO(c)
      iRetVal = WorkOrderDetailingPolicy.updateRecordStatus(objPWODP.iWorkOrderNumber, objPWODP.strPersonInformed, EMSConstants.PROCESSING_CANCELLED_WO);
      if (iRetVal == -1) {
        throw new NewException("Updating failed");
catch (Exception e) {
    vecWONumbers = null;
    throw new CSDDBException(e.getMessage());
}finally{
    try {
      objWOPRs.close();
      objStmt.close();
      DBHandler.releaseCSDBCon(objDBConn);
    catch (Exception ex) {}
//return vector
//here is the code that actually updates the records
public static int updateRecordStatus(int iWONumber, String strPerInformed , String strStatus) throws CSDDBException{
   PreparedStatement objStmt = null;
   Connection objDBConn = null;
   String strSQL = null;
   int iRetVal = -1;
   try{
     objDBConn = DBHandler.getCSDBCon();
     objDBConn.setAutoCommit(false);
     strSQL = "UPDATE Table SET [Detailed Mode] = ? WHERE bla bla";
     objStmt = objDBConn.prepareStatement(strSQL);
     objStmt.setString(1, strStatus);
     objStmt.execute();
     objDBConn.commit();
     iRetVal = 1;
   }catch(Exception e){
     iRetVal = -1;
   }finally{
     try{
       objStmt.close();
       DBHandler.releaseCSDBCon(objDBConn);
     }catch(Exception ex){}
   return iRetVal;
//Here is the code that call the records again
public static WorkOrderDetailingPolicy getWorkOrders(int iWorkOrderNo) throws CSDDBException{
    Connection objDBConn = null;
    PreparedStatement objStmt = null;
    ResultSet objWOPRs = null;
    WorkOrderDetailingPolicy objPWODP = null;
    String strSQL = null;
    try {
      objDBConn = DBHandler.getCSDBCon();
      strSQL = "SELECT * FROM [Work Order Detailing] WHERE [Work Order No] = ?";
      objStmt = objDBConn.prepareStatement(strSQL);
      objStmt.setInt(1, iWorkOrderNo);
       objWOPRs = objStmt.executeQuery();
      if (objWOPRs.next()) {
        objPWODP = new WorkOrderDetailingPolicy();
        objPWODP.iWorkOrderNumber = objWOPRs.getInt("Work Order No");
        //......Get Record values
    catch (Exception e) {
      objPWODP = null;
      throw new CSDDBException(e.getMessage());
    }finally{
      try {
        objWOPRs.close();
        objStmt.close();
        DBHandler.releaseCSDBCon(objDBConn);
      catch (Exception ex) {}
    return objPWODP;
}

Hello,
Can you put an example of your problem online?
Are you sure you're not having problems with case sensitive data?
Thanks,
Dimitri

Problems getting laptop started after ipod load

Similar Messages

Maybe you are looking for