Problems in general

All the noise on this forum aboput problems makes me wonder if this is an inordinate amount of problems or just a lot of noise about a few problems and is this normal for a new product ? The only problem that makes me nervous it the book publishing moduel. Does using another service and not the LR one solve the loss of books? I'm new to LR and to DSLR.

Have confidence in your own experience. Those who do have problems are (rightly) loud in their complaints. With 4.0 it was more than expected, now with 4.1 it's much less, almost down to normal.
As for Book, I have lost more than one book, but it is a rare problem and very difficult to pin down (even for someone like me who knows LR and Book well and would normally expect to have a good chance of figuring out where the problem lies). On the other hand, I don't think the risk of losing books is so great that it prevents me from using this method . I just make duplicates of the book collection and change between books in Library (because I'm convinced that changing between books had sparked the problem). So if it's any encouragement to you, I think it's good enough to put my own time into it - only last week I unwrapped another book from Blurb.
John

Similar Messages

Possible upgrade solution for people who have HD and problems in general.

OK, for me, Leopard has been as painful as going osx from OS9, at least the upgrade has been , dunno about the retail copy., bugs, bugs, bugs with the upgrade for sure.
Here is what happens generally., you upgrade and basically you need to run disk tools from a external drive or the Leopard DVD., the problems move on still.
Solution i found was to back up to another drive, that is right guys, spend another hundred bucks no one warned you about., get a external HD or if your living it high and collect macs as Apple assumes you may just have a second Intel mac laying around with a Sata drive in it to start up in "Firewire Target Mode", (hold the "T" at start up)and start cloning your drive with SuperDuper (also need to purchase)..
Ok
1- once you clone your drive (usualy a hour for the base system alone).
2- erase it as one partition,
3- in the options make sure it is set as GUID partition (takes about a hour) and
4- then as well zero out all the data., takes about 2 hours there as well.
5- Now run disk utilities from the Leopard DVD or the computer or booted up drive you used to do all this., if you can not fix permission of th volume you seen to reformat the Drive again 7 pass!, could take 4 hours.
Finally you will be able re clone it, and run disk tools after a days work no one warned you about.
*This disk utilities operation may take about 1 hour but say 11, and look like this below;*
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/English.lproj/DisplayName.stri ngs", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/thumbnail.png", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Butterfly.mailstationery/Contents/Resources/top.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/English.lproj/DisplayName.strings", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_letter.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bg_pattern.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/bottom.jpg", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/content.html", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/Description.plist", should be 80, group is 99.
Group differs on "Library/Application Support/Apple/Mail/Stationery/Apple/Contents/Resources/Stationery/Contents/Reso urces/Flower.mailstationery/Contents/Resources/English.lproj/DisplayName.strings ", should be 80, group is 99.
*Good luck*
*My ADVISE:* if you experienced these problems, as above, reformatting by zeroing out the data works. as for those who want Leopard. *DO NOT UPGRADE but install a RETAIL version of LEOPARD* until apple has a update,
I read posts where people who have the retail copy (full DVD) have not experienced these problems, mine was a upgrade from Tiger since i got a mac in the last 30 days.
WARNING: it has been hard to trust Apple fanatics with these things now days, many posts are denials to things not working so i could be wrong there as well, been honest saves time is all i can advise them.
If anyone has beter advise please do post it.

And what is yaml all about, shows up in disk utilities for hundreds if not thousands of issues?
showed up as a user as well.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/proxybasicauth-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyAuthenticator/cdesc-ProxyAuthenticator.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyBasicAuth/cdesc-ProxyBasicAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/cdesc-ProxyDigestAuth.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/ProxyDigestAuth/check_uri-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/cdesc-UserDB.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/get_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/make_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPAuth/UserDB/set_passwd-i.yaml", should be 0, group is 99.
Group differs on "System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/share/ri/1.8/system/ WEBrick/HTTPProxyServer/cdesc-HTTPProxyServer.yaml", should be 0, group is 99.
------------------------------------------------------------

Leopard is a problem in general

we have 5 macs but only installed Leopard on one, the new macbook (1 gb memory), because we experienced many problems. The Tiger mac book was fast, the Leopard Macbook is slow. Appleworks does not function, Quickbooks freezes (a problem for the office). The computer sleeps and does not wake up, requiring restart. Keystrokes are not recognized on the same macbook that worked great with Tiger. in general a disappointment. ii am uninstalling and waiting until the problems are fixed.

I'd agree - less than seamless upgrade. So much so that it pains me to watch the ad that mocks the Vista upgrade. My experience with Leopard:
Cannot burn CDs / DVDs from the Finder anymore (unresolved).
Toast 7.1.2 doesn't burn anymore (reinstall 7.0.1 will fix this).
HP Scan software for the hp Laserjet 3015 now hangs (unresolved).
Parallels Tools do not install - hangs (unresolved).
USB device switching between Mac and Parallels VM flaky - causes drivers to crash, device conflicts and such (unresolved).
Basically, like any other OS upgrade on any other platform. If you rely on your Mac for business, I'd recommend waiting awhile longer before upgrading. Fortunately, all of the issues you've identified I haven't experienced. Good luck!

Problem with General Ledger Budget Load

Hi All,
We are experiencing an issue wherein the Budget figures for general ledger are incorrect in the cube. The data-flow is 0FI_GL_10 to DSO (daily delta) to Cube (daily delta). There is a singular DSO and Cube for Actuals and Budgets. The figures in the DSO tally with R3. The delta from the DSO to the Cube is using Active Data Table of the DSO using DTP. The contents of the cube are exactly similar to those of Active Data Table i.e the new and old records both reach the cube and hence the inconsistency. I tried to do a selective deletion for a particular fiscal period from the cube and then doing a full update using both the Active Data and Change Log tables but the results are still the same. All key figures u2013 0BALANCE, 0DEBIT and 0CREDIT look affected. My questions are u2013
Is using Active Data Table rather than Change Logs for delta the reason behind this ?
Why is it only the Budget that is affected, Actuals and other versions look fine.
Do we need a different data-flow (like a daily delete and load into a separate cube) for Budgets ? Does SAP suggest something specifically for Budget loads.
Why does selective deletion for a particular fiscal period not working, do I need to do it for the entire fiscal year ?
Your expert opinion on this is highly appreciated. Thanks in advance.
Regards,
Saurabh Diwakar
Edited by: Saurabh Diwakar on Sep 19, 2010 10:57 AM

HI ,
may be you can take a look at the following SAP notes , it might help
Note 1002272 - NewGL-DataSource 0FI_GL_10, 3FI_GL_*: Records missing in BI
Regards,
Sathya

DbAssistant Problems & Java Problems in General

Like many people in this situation, I have struggled with
installing 8.1.5. The biggest problem was that dbAssist
appeared to not install correctly (it actually installed, but
could not launch). The error is a java class exception "Could
not find java.lang.Thread."
The problem lies in that Oracle is not loading the JVM using
environment variables PATH and CLASSPATH (which is the JAVA
way). Instead they have hard-coded paths to specific classes.
Oracle products are looking for java.lang.Thread in the rt.jar
file which may or may not exist (depending on whether you have
the JDK or the JRE). Instead you may have classes.zip which
also has the java.lang.Thread class.
The fix that worked for me is simply to link rt.jar to
classes.zip.
$ cd /usr/local/jre/lib
$ ln -s classes.zip rt.jar
So far this seems to work well (in light of the total install
experience).
null

That's because you are using the JDK (which uses classes.zip),
instead of the JRE (which uses rt.jar) as mentioned in the docs.
David Rasmussen (guest) wrote:
: Like many people in this situation, I have struggled with
: installing 8.1.5. The biggest problem was that dbAssist
: appeared to not install correctly (it actually installed, but
: could not launch). The error is a java class exception "Could
: not find java.lang.Thread."
: The problem lies in that Oracle is not loading the JVM using
: environment variables PATH and CLASSPATH (which is the JAVA
: way). Instead they have hard-coded paths to specific classes.
: Oracle products are looking for java.lang.Thread in the rt.jar
: file which may or may not exist (depending on whether you have
: the JDK or the JRE). Instead you may have classes.zip which
: also has the java.lang.Thread class.
: The fix that worked for me is simply to link rt.jar to
: classes.zip.
: $ cd /usr/local/jre/lib
: $ ln -s classes.zip rt.jar
: So far this seems to work well (in light of the total install
: experience).
null

Problems accessing parameters, files - problems in general.

I've been posting my problems to comp.lang.java.programmer but Google Groups is exceedingly slow to update and I've been stuck on this for nearly two whole days:
I am developing what will be a series of web utilities for our company and our client's company. Unfortunately I am hampered by the fact that my Java is not that good having come from a C++ background.
My current setup is Windows XP, JDK 1.3.1.07 (which is what our client is running), Tomcat 4.1 for testing on my local box.
I've been middling around with small examples and decided to do something slightly more complex. What I am trying to do is access a file that is described in web.xml as a parameter. However when ever I run the program it is unable to find the file. All the documentation I have (web-based plus a Professional Java Server Programming J2EE Edition - way over my head) either skims across it/takes it as read it will be set up correctly/doesn't touch it at all.
I thought I was trying to access the wrong directory so I mapped the file to the root of C and still can't access it - it always comes back as null. Also between attempts I restart the Tomcat server so it always loads in the web.xml file.
This is my web.xml:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Welcome to Tomcat</display-name>
<description>
     Welcome to Tomcat
</description>
<servlet>
    <servlet-name>LogIn</servlet-name>
    <servlet-class>website.LogIn</servlet-class>
    <init-param>
      <param-name>passwordFile</param-name>
      <param-value>C:\\passwords.txt</param-value>
    </init-param>
</servlet>
<servlet-mapping>
    <servlet-name>LogIn</servlet-name>
    <url-pattern>/logged</url-pattern>
</servlet-mapping>
</web-app>And the Java:
package website;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
* Handles the login to the administrators section of the website
public class LogIn extends HttpServlet
    private String passwordFile;
    /** Read the password file from the location specified
     * by the passwordFile initialization parameter.
    public void init(ServletConfig config) throws ServletException
        super.init(config);
        passwordFile = config.getInitParameter("passwordFile");
        System.out.println(passwordFile);
        if (passwordFile == null)
            System.out.println("The \"passwordFile\" property must be set to a file name");
        try
        catch (Exception e)
            System.out.println("Error: Unable to read passwordFile.");
    public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
    public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
}It was suggested on comp.lang.java.programmer to check the path that the system was thinking I was searching which I did by inserting this code fragment:
     // initialise the servlet and load password(s)
//     super.init(config);
//     passwordFile = config.getInitParameter("passwordFile");
     // added code
     passwordFile = "passwords.txt";
     File f = new File( passwordFile );
     System.out.println( f.getAbsolutePath() );
     // added code.
        ...This lead me to learn that the directory being returned was:
C:Program Files\Apache Group\Tomcat 4.1\passwordFile.txt
Which is strange since I would of thought that the lowest directory
that is visible to the class would of been ROOT (hence it's name).
Does this mean if I copy the passwordFile.txt to the above directory
it would work? Actually no. I still can't get the filename as a
parameter from web.xml which is frustrating. If you could give me any
pointers on what might be wrong then that would be cool.
I thought I could move forward by accessing the file directly. But no: An addition of f.exists() to check that the file exists returns false. I've now got a copy of passwords.txt in every single directory from the classes directory all the way down to C:\ and it still doesn't work.
I hope someone can help out here since this is very frustrating to be stuck on something so basic as file handling.
Graham Reeds,
http://omnieng.co.uk | [email protected]

I can see how this is frustrating but it should be fixable. The last example you posted won't work because you have "passwords.txt" instead of "c:/passwords.txt".
If you're still looking for a solution could you cut and paste the following code into your servlet code and then post the results?
// Check that init param is read correctly
String filename = config.getInitParameter("passwordfile");
System.out.println("config param = " + filename);
// try filenames
String[] filenames = new String[] {"c:/passwords.txt", "c:\\passwords.txt", "passwords.txt"};
for (int i=0; i < filenames.length; ++i) {
   File file = new File(filenames);
System.out.println("File " + filenames[i] + " - exists = " + file.exists());
System.out.println("Abs path = " + file.getAbsolutePath());
This is based on the file c:\passwords.txt existing - if I have the wrong filename, please adjust. Also, you may need to change <i> to [[i]i] in a couple of places.

Problems in general usage and syncing

I am having problems both ways with my iPod. In the usage part, my iPod will show that I have songs uploaded on it, but when I choose to listen to it it will just kick me back to the main menu. Also in several instances when something is supposed to have cover art associated with it, it will show the wrong artwork. When it comes to syncing it to my computer, it will not update and gives me a -50 Error. I have tried deauthorizing my computer and restoring my iPod to its factory settings. Any help is appreciated.

Have confidence in your own experience. Those who do have problems are (rightly) loud in their complaints. With 4.0 it was more than expected, now with 4.1 it's much less, almost down to normal.
As for Book, I have lost more than one book, but it is a rare problem and very difficult to pin down (even for someone like me who knows LR and Book well and would normally expect to have a good chance of figuring out where the problem lies). On the other hand, I don't think the risk of losing books is so great that it prevents me from using this method . I just make duplicates of the book collection and change between books in Library (because I'm convinced that changing between books had sparked the problem). So if it's any encouragement to you, I think it's good enough to put my own time into it - only last week I unwrapped another book from Blurb.
John

Hatched areas appear - corrupt layer or Photoshop problem in general?

Hi there,
when I edit a picture in PS, after a few steps (cropping the original layer, content-aware fill, adding some text layers, etc.), parts of the original background layer is covered with a hatched area. First I thought, this could be a display problem, but when you close and re-open the file, the problem remains. And it actually seems to be in the layer - when you hide the layer, the hatched area also disappears.
By the way, I've been working with the CC 2014 Windows edition for a while now and never encountered this problem before. It just appeared yesterday.
Any ideas how this can be solved?

Here's the system info:
Adobe Photoshop Version: 2014.0.0 20140508.r.58 2014/05/08:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2793 MHz
Built-in memory: 16107 MB
Free memory: 11431 MB
Memory available to Photoshop: 14422 MB
Memory used by Photoshop: 85 %
3D Multitone Printing: Disabled.
Touch Gestures: Disabled.
Windows 2x UI: Disabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Display: 2

Login Problems and General JSP Security Questions

I'm new to this, so I'm still not sure if I'm approaching this problem the right way. But after a user logs in with the correct username/password, I create a session attribute like so:
session.setAttribute("loggedIn", "true");
Now, inside of every other JSP page I make the following check before the user can continue:
<%
          String loggedIn = (String)(session.getAttribute("loggedIn"));
          if( loggedIn == null || !loggedIn.equals("true")) {
%>
               <jsp:forward page="../login.html" />
<%
%>
And to logout I simply set the attribute to false:
session.setAttribute("loggedIn", "false");
Unfortunately, this doesn't work very well. It seems to be very inconsistent. Does anyone know of a better, not-so-difficult, method to do this? Or do you see any problems with what I have?
Another thing, how do I prevent a user from accessing my JSP directory? For example, I have my JSPs stored in public_html/jsp directory, how do I prevent someone from simply visiting www.mysite.com/jsp without using the web.xml file?

I use sessions in this way without any problems, what are the inconsistencies??
You can protect folders with Tomcat security but it requires XML configuration.

Apple problems in general any help

Please stay with me!
For 2 years I have run a Macbook Pro connected to a large Apple monitor. This system has been fairly bullet proof an has given me no problem. I am an amateur photographer and only use a computer for editing (Photoshop) and storing photos and music.The Macbook comes home with me in the evenings and is plugged into the monitor when I get to work, it is plugged into the office network and has the choice of 4 different printers including 2 large Canon and an A3 Epsom. This system has proved very successful. The 2 screens gave me the chance to do both business and private work at the same time by keeping an eye on both at the same time!
My problems stared when iphoto couldn't be opened, I tried for several weeks on and off but didn't worry too much because I don't actually use it much anyway. I decided to buy iLife 11 and hoped that the upgrade would resolve the problem. ILife wouldn't load because it told me to upgrade to Snow Leopard. I ordered it and installed it when it arrived. Not only did it not cure my iPhoto problems it also knocked out all my drivers for printers and scanner.I asked our computer service company to come in and have a look, they spent 4 hrs before I got back to somewhere near where I was to begin with. The problem is computer companies seem to be less geared up to solve Mac issues, they seem to lean toward PC.s. The problem is our company has all PC's, mine is the only Mac!
This took place about 3 weeks before Christmas. Knowing that my Macbook was bulging at the seems my wife bought me an iMac 27" for Christmas (after months of hints). The service guy came in to install between Christmas an New Year. He struggled with the print setup but when he left everything seemed ok. I produce A3 calendars at this time of year, but when I tried to print on one of the Canon A3 printers, as I have done hundreds of times, it kept coming up with "out of paper" even though it was full. Today I have had the printer service guy in today who has loaded more drivers etc. He never solved the problem, and left saying that the new IMac to too sophisticated for the Canon printers!!!
I have, with a struggle, managed to print some A4 pages but the A3 seem to print only the top quarter of the page.
I realise that this is probably one of the longest things ever put on here but short of having a fire in the back garden, I am struggling!
Chris
P.s The monitor that I was hoping to run along side my iMac, as I did with the Macbook has completely different connections, I haven't even looked at that issue yet.

Hi
Have you got the latest Canon drivers? Available here: http://support.apple.com/kb/DL899
(short reply to a long post )

Computer problems in general after newest iTunes update

I initially posted this as a reply in a different forum, but was informed that I should start my own post instead. Here's the original post.
After installing this latest update to iTunes, my computer has been acting very slow. The web browser takes forever to load where it once loaded in a split second. I've ran the OnyX program to try and reset my permissions and that has not worked, I was unable to "ignore" these permissions, and it takes a good 10 minutes for me to now connect to an external harddrive through a network, where as with the web, it would load without an issue before this update. I don't know if there is something I am doing wrong, or if any of this is related to it. However, it wasn't until I installed this update that all of this started happening, and I don't much believe in coincidence.
Thanks!
Zac

Quick question: How big is your hard drive, and how much free space do you have left on it?
Another quick question: Have you restarted since you ran Onyx and after you repaired permissions?
Try booting up in safe mode and see if performance is still really slow.
to boot in safe mode:
1. Be sure the computer is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone but not before.
4. Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).

Some problem about SAP R/3 ~ I need some detail solutions and suggests

I need some detail solutions and suggests about below these problems:
Problem 1: SAP Management Console cannot start successfully
     Problem 1.1: Click on SAP Management Console, but yellow light continues for a long period of time.
     Problem 1.2: In DOS, startsap command cannot start SAP R/3.
     Problem 1.3: Oracle 9i database automatically shutdown by itself.
     Problem 1.4: There is very low disk storage left (say less than 50MB) in the hard disk where Oracle 9i database is installed in the server.
Problem 2: Problems in User Maintenance and Security of the SAP R/3 System
     Problem 2.1: Super user account password was lost (e.g. SAP* password was lost)
     Problem 2.2: Super users DDIC and SAP* were dropped in table usr02 in Oracle.
     Problem 2.3: Some users have been locked or deleted by an ABAP programmer who has been granted with almost superuser profiles. For example, an ABAP programmer has been granted a profile of SAP_ALL and SAP_NEW but the system administrator would like to restrict all programmers form using SU01, SU02, SM01, so that no programmers can maintain other user's accounts.
Problem 3: Problems in the configuration of client copy
     Problem 3.1: A copied client from the Client 000 cannot be customized.
     Problem 3.2: No sample data in IDES after a successful client copy.
     Problem 3.3: Logging on without being authorized. A new client is created and client copied and transported successfully. However, anyone can log into the system using user SAP* with the default password PASS.
Problem 4: Problems in the installation of SAP R/3 Server
     Problem 4.1: Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
     Problem 4.2: A network card of a server was faulty and it was replaced by a new network card but the SAP R/3 license was expired.
     Problem 4.3: You would like to reinstall SAP R/3 on a server which has previously installed with SAP R/3 but the same error message appears during the re-installation.
Problem 5: Problems in the backup and recovery of Oracle 9i Database
     Problem 5.1: A redo log file was lost and the database could not be started.
     Problem 5.2: A group of data files were accidentally deleted and the database could not be started.
     Problem 5.3: Both the online redo log files and archived redo log files have been damaged.
Problem 6: General problems regarding the general operations and the connection to the SAP R/3 System
     Problem 6.1: After a reboot of the Windows 2003 Server, SAP service is not automatically started.
     Problem 6.2: Some users complained that the performance of SAP R/3 is really very slow.
     Problem 6.3: A user complained that his/her password was correct but he/she could not lock on the client because it was locked.

Problem 2
2.1 If user account of the sap* is lost u can retrive by loging into os level as sidadm type this command
DELETE SAP<sid>.USR02 where BNAME='SAP*' AND MANDT=100
This 100 is the client in which u want to delete the sap*
after that restart the server and login as sap* with the default password as pass
there is also another way of doing this if needed u can catch me at [email protected]

MSI GeForce 4 Ti 4200 128 DDR (Direct3D problem)

I bought the MSI GeForce 4 Ti 4200 128 DDR just today and I seem to be experiencing Direct3D issues. I never have problems with general use of the video card, but when I try to play games that require 3D acceleration I get crashes (Blue screen of Death). The reason why I think it is the Direct3D is because I only get problems when attempting to run 3D accelerated games, and I've downloaded a couple video test programs off of the net and they have crashed when testing 3D as well. ?( I just ran dxdiag and it failed when I test Direct3D:
Direct3D test results: Failure at step 8 (Creating 3D Device): HRESULT = 0x887602eb (error code)
Questions: Has anyone had this issue before and is it fixable without me returning the card for a different one?
Thanks,
Brent

Sorry about that, I should have put that in the first message.
I run Win 2000 server and I did a clean install (format drive) when I got the new video card. I have a Pentium 3, 800 Mhz 256 MBs RAM. The motherboard is an AOpen AX3S with all Intel chips.
My previous video Card was an ATI Rage Fury 32 MB and it ran all my games with Direct3D, but usually with low frames per second.
The only thing I changed was the video card and the drivers of course. I'm really trying to avoid sending the card back. ;( Any suggestion would be helpful.. Thank you!
Brent
P.S. I tried to run that 3D Mark program that people use to test their video cards and that failed before it finished, so my score must be 0.

Problem with link in SWF file

good day to you all in this great forum
my name is james and i want to see if i can find help here in the forum for my problem.
I'm building a site for my friend. (the site is in hebrew so sorry....)
for the site building I'm using the software iweb - on mac.
the site is almost complete but i have 1 big problem.
this is the link to the site - [URL="http://www.skip-up.com"]skip-up[/URL]
I'm using a head menu in flash
i have this flash from some template i downloaded from the internet and all i had to do is change the buttons names and to change the links of the buttons to point to my html pages.
and now to the problem :
to get to the problem in general - the flash head links don't work
if i press it in the site on godaddy nothing happens i just don't see the flash head and instead i dee a page that says something like "the page can not be found"
if i go to my desktop to my site directory and press the links the only thing that happened is that the button is changing the color like I'm in the right page but I'm still in the original page.
and the strange thing is that by if i only open up the SWF file and press the links are working
and it's open up my browser and to the right page
1. you can see the structure of the site here in this page :
[IMG]http://farm4.static.flickr.com/3442/3962332346_432d004df2.jpg[/IMG]
what i have is the master index.html and 2 directories : - the first one
called flash and have 1 flash file (this file is o.k with no problem)
and the other directory had all my site files
2. like i said i got the original FLA file and all i did is changing the buttons
names and changing the links of the buttons
the links i changed in the actions menu - i just searched for the original
url and change the names to much my website html pages names
3. here is the original FLA actions menu - you can see that I'm standing on
one of the links :
[IMG]http://farm4.static.flickr.com/3483/3961893129_2b8fc4ecd9.jpg[/IMG]
and here is my fla after the changes - as you can see i just changed the
name:
[IMG]http://farm3.static.flickr.com/2544/3962668872_8693f399ba.jpg[/IMG]
4. i uploaded all my site (it's small zip file) if someone wants to see more
i tried to describe everything in details because it's very important for
me to find a solution [URL="http://rapidshare.com/files/286059228/skipupsite.zip.html"]skip-up site download[/URL]
I'm really hopping there's somebody that will be kind to help me out
thank you very much

Hi. It looks like your code is not finding the mp3. At least,
I can reproduce your error code by removing the mp3 from the
directory, or renaming it.
Btw, if you test with FF instead of IE, you'd see the error:
Error #2044: Unhandled IOErrorEvent:. text=Error #2032:
Stream Error.
at KZFlash_fla::Sound_2/KZFlash_fla::frame1()
Hope that helps.

A problem about Portal integration with R/3 ?

Hi everyone :
We want implement that many Portal users(vendor user) mapping one R/3 user(vendor user),and the the Portal user(vendor user)could query R/3 report via Portal ,and everyone vendor user can query his data only,they can't query the other vendor's data.
Of course ,we must do some develop.
I think this problem is general, and most of Portal project would meet this problem.
Is it possible ?
Is there somebody had solved this problem ?
Any discuss is welcome!
Best Regards,
Jianguo Chen

Hi Chen,
If u r going to call RFM ,u can pass the portal userid as a parameter in the function call and maintain a ztable on R/3 side having fields Portal user id and Vendor id.
Based on that u can get the vendor id and filter the report data accordingly ,u may also display the Vendor id on the portal iview by passing the same from the R/3 side. I think this is possible u may try this out.
Best Regards
Anand

Problems in general

Similar Messages

Maybe you are looking for