Problems in playback of burned CD

I downloaded an album and the problem in particular exists between 2 songs which play one after the other. Burned the album to a CD 3 times and still coming up with the same problem. These 2 songs when playing from itunes play fine with no gap between them like a continuous song which is how it is supposed to be for these 2 songs. I changed the info on the 2 songs so they would be gapless however when playing back from the burned CD I get a gap of a few seconds(like a skip) at the end of the first song. Then it completes the music(last few seconds)of the first song and moves on to the second. Any suggestions how I get rid of that skip at the end of the first song on the burned CD? Help.....
Dell XPS M140   Windows XP  

Can any commercial CD players (car or boombox) play an MP3 file?
Some can, many can't. If it can, usually, it will have MP3 shown on the front panel.
How do you convert the M4A format (that iTunes 9 uses by default when importing a commercial CD) to MP3 so you can burn the playlist?
iTunes pref s->General - IMport settings.
Set it ti MP3.
Then in iTunes, selecte the file(s) to conver tthen right click - *Create MP3 version*.
This will create a new copy of the song in MP3 format.
Note that teh Imnport settings affect import of CDs as well as converions so if you want CD Imports to be AAC, you will need to set Import settings back to AAC. If you want them MP3, you can leave it.

Similar Messages

  • Problem with playback of burned audio cd (using CS6)

    When playing back cd tracks on an audio cd created with CS6, there is a very slight fade-in or loss at the beginning of each track. What causes this and can it be eliminated?  No problems playing the track files on the cd layout in CS6, but only when playing the actual cd in a home or car cd player.

    Get the latest firmware update for the ipod.
    If that doesn't fix it-stop using videora. It is a buggy piece of software that causes the majority of problems posted here regarding video.

  • Problems with playback when burning to DVD or saving as MPEG

    My movie looks fine when viewed through Adobe Premiere Elements 9 but then when I burn it to DVD or save as an MPEG the footage appears jumpy. I have tried deinterlacing and this improves it but doesn't fix it. Any suggestions on what I can do to help with this.

    Now2011
    Is the jumpy uniform or mostly at point of major motion in the content?
    Have you tried applying just Field Options/Reverse Field Dominance? If so, any better, worse, same as if you had just selected Always Deinterlace?
    1. Is you source media interlaced or progressive video? If interlaced, is Fields = Upper Field First or Lower Field First?
    2. When you save an "MPEG" file, what are you setting for Field Order (See Advanced Button/Video Tab)?
    Note DVD-VIDEO on DVD disc is standardized as interlaced with Field Order = Lower Field First.
    3. Is jumpy = flicker, double looking images, or just plain jumpy?
    ATR

  • Music starts and stops during playback of burned DVD

    I really need help with this problem...I made a slideshow and added music from itunes in the program IDVD. Once I burned the DVD the music will start and stop throughout the DVD and not at chapters as I read in other threads - but in random places on the DVD. The DVD sounds like it gets hung up and then starts again. This is my first project using IDVD, so any help would be great.

    Debra,
    Do your project have music purchased from iTunes? If so, that could be the cause of this problem. Music from iTunes is DRM-protected and can cause problems in playback. To take care of this, first burn all of your purchased music to a CD, then reimport in an aiff format. To do this, in iTunes, go to iTunes>Preferences>Advanced>Importing. Look for "Import using", and use the drop-down menu to select AIFF encoder.
    Good luck.

  • I am having a problem with playback in Final Cut 6.0.6

    Hello,
    I am having a problem with playback in Final Cut 6.0.6 of 1920x1080 60p footage.
    I transcoded MTS files shot on a Sony NEX FS100 into Apple Pro Res mov files but the
    playback stutters in Final Cut and QTime making it impossible to edit. Is this because the files
    are just so big the computer is having a problem processing them? If so what should I edit in to preserve the
    best quality?
    I am Running Mac OSX 10.6.8
    2x2.4 Ghz Quad Core Intel
    32 GB 1066 MHz DDR3
    Admittedly my FCUT is out of date, I intend to up to X when I finish off an ongoing project.
    Thanks Luci

    You might consider running diskwarrior on your drive (alsoft.com).  And run diskutility, repair disk.  A corruption of the drive could cause problems.  Also, drive speed starts to fall sharply as the drive gets full.  Make sure you have a minimum of 10% free space on the drive.  You might also get a utility to check the speed of the drive.  I think Aja has one.
    Also, do you have anything else connected to the firewire bus?  If so, try disconnecting it.  You might also try disconnecting ethernet and turning off your airport.  Resetting your fcp preferences couldn't hurt.
    https://discussions.apple.com/docs/DOC-2491

  • OFT- Problem while Playback in Oracle Apps 11i

    hi,
    As earlier Oracle E-biz Application are not working in OFT8.5 but now in the latest version OFT9.0 as per the information it will work fine.
    But i'm facing the problem while playback the Oracle E-biz Application.
    I have recorded Order Management Process in Oracle Apps11i. At the time of recording its work fine.
    Steps which i had done
    1) Login into the application
    2) Click on the Responsibility Order Management--> Sales Order
    3) It opens the external Applet window
    4) Open the Sales Order Form where i enter the Customer Name and add the line item for the customer and then book the order
    Stop the Recording and then playback the script
    It works perfectly fine till step3 but on Step4 what ever the action user had done on Sales Order Form it is not playing back that action and just close the form and generate the Pass Result.
    So i want to know why it is not playback the action which user had done on the form.
    I really appreciate if any one can give the solution to the problem

    Thiru,
    Which concurrent manager consumes the CPU usage? Are you able to identify it?
    Any errors in the CM log file? Did you try to start the CM with diag=y and see if any errors are reported in the log files?
    What happen to the CPU usage when you stop the CM?
    I assume that you are running Purge Concurrent Manager/Requests on regular basis, so this should not be an issue here.
    Please review the following notes, and see if it helps.
    Note: 114380.1 - Concurrent Manager Processes Taking Lots of CPU
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=114380.1
    Note: 264752.1 - FNDLIBR Consuming Memory Causing CPU Utilization To Increase Daily
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=264752.1
    System is Live since 2006 and the issue started only today.I assume no changes have been done recently, correct?
    Regards,
    Hussein

  • P35 Neo2-FR / Marvell Controller problem. - DVD/CD Burning

    I think this is hardware related and more like limitation of the model rather than one faulty motherboard.
    My setup is
    P35 Neo2-FR / E8400 / WinXP
    I have all 4 intel SATA for RAID so I've used Marvell controller for my DVDRW. 1st was NEC drive IDE and while it read disc fine it couldn't burn any CD/DVDs
    I thought it was faulty DVDRW so I've bought a new samsung SATA burner. It has SAME exact problem. Cannot start burning.
    I've tested the same unit with different computer, and of course it works.
    I'm sure not many people have similar spec as mine (4 SATA HD RAIDS) so this might go unnoticed but I find it a very serious problem.

    Quote from: larciel on 12-February-08, 07:08:08
    I just found out that it is actually reported as SCSI.
    SCSI\CDROM&VEN_TSSTCORP&PROD_CDDVDW_SH-S203B&REV_SB02\5&2A9ABE04&0&040
    That's the DEVICE_ID for the Drive.
    You might be right. This might be issue with Raid and Marvell conflicting.
    I use Lastest driver for all of them. I actually use DriverPacks from DriverPacks.net
    Just trying to see if anyone have same config as mine so I can know that this is driver issue and not hardware issue.
    You could disconnect your raid setup and attach your burner to a Intel SATA port and see what the Intel controller thinks about your burner. Bios in none raid mode and fast boot disabled so you can see whats going on.
    Boy there is another possible problem. I would never use the DriverPacks on hardware that I can get drivers for manually. Did you slipstream the DriverPack into your XP disk? I have seen the wrong drivers used and or mis configured when doing so.

  • I have a problem with vertical images burned on a cd

    I have a problem with vertical images burned on a cd either from a Mac or a stand alone burner. What happens is the images come from the card and are put on the cd. Also note the the camera has been set for the computer to automatically show images vertically when shot that way. The images look good on my Mac, but are horizontal on windows computers. Both XP and Vista. What can be done?
    John

    Hi, thank you for the response... not sure looks that the battery its ok, I'm not sure.
      Charge Information:
      Charge remaining (mAh):    4356
      Fully charged:    Yes
      Charging:    No
      Full charge capacity (mAh):    4356
      Health Information:
      Cycle count:    813
      Condition:    Normal
      Battery Installed:    Yes
      Amperage (mA):    0
      Voltage (mV):    12571

  • Problem with iDVD - cannot burn DVD.

    Problem with iDVD - cannot burn DVD.
    Self has a MacBook Pro, which al new software.
    My problem is, when my burn a slideshow, prop process ever before burning.
    Box show: Multiflexing and burning: write Lead-in, then the process stops and ejects the disc.
    I have burn a Movie test – no problems.
    Self use Verbatim DVD-R
    Who can help - what should I do?

    How did you create the slideshow and get it in iDVD?
    As a general comment try following this workflow to separate the encoding and burning processes:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

    When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

    What kind of CD are you burning (Audio or MP3)?
    If you're burning an MP3 CD, the songs must already
    be in mp3 format.
    If not, iTunes will tell you that you have no songs
    in the playlist.
    M
    I was making an audio cd. But I have since found out what the problem was. The files in my PLAYLIST I converted to aiff, since they were SDll files (I thought they were similar to AIFF, and they PLAY on Itunes...just won't burn.) When I selected the songs in the playlist and converted them...I thought all those files were converted, They were not. The converted files went into my LIBRARY, even tho I selected the ones in the playlist...and once I exchanged the SDll versions of the songs in my playlist. THEN they burned fine...but still...it's confusing..you say convert..it says it's been converted..and what they don't say is it's not been converted inside the playlist...where I had selected the songs...It just ADDED aiff versions..but only in the library...Anyway, that's what happened. But it's strange that it PLAYS SDll but won't burn them....and you'd think, logically..the ones you selected would change...but they don't. Playlists are mainly pointers to the actual files I guess...a sort of Alias..
    At least it works now. But it's sad that the latest itunes does more, but also does LESS...as I used to be able to burn SDll files. Now I'll have to convert all my files to AIFF, and mp3's as I assume my ipod video won't play anything but mp3's?

  • Problem with playback device message..

    problem with playback device message.. been reading up about this problem but so far nothing has worked for me.. i have windows 7. Been trying to find the place in here to get some help but have no idea how this works. So if someone reads this.. please HELP me. Cheers

    What OS are you running?  What's the model of your computer/audio device?  What does Skype list as your playback/recording device?

  • Windows 10 updated - Skype problem with playback device

    Hi, please advice on how to correct the error with Skype - problem with playback device.I have updated all drivers

    Please, run the DirectX diagnostics tool (32-bit). Run dxdiag.exe (Start - Run or Win key +R) then press enter or click "OK". Once the diagnostics completes, "Save All information..." to a text file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.
    (i.e. compress DxDiag.txt ---> DxDiag.zip) 

  • Solutions to "Problem with playback/recording devi...

    I've only had a few microphone/audio problems with a friend on Skype not being able to hear me or vice versa, nothing that couldn't be fixed. Usually the call would at least pick up even if there was no sound going through. But just out of the blue two days ago (Monday, May 4th), when my friend tried to call me, the call dropped without any explanation. I tried also to call, but then every time, it wouldn't even last long enough to ring and it would just drop. It kept having a notification saying "Problem with playback device" or "Problem with recording device". I've tried signing out of Skype, restarting my computer, checking all monitor audio levels, etc... I always keep my Skype up to date, but I checked again for any new in case that would allow the call to go through, but it didn't, even after I updated it to the lastest version 7.4.0.102. I tried calling Skype Testing Service a million times, but still the call won't even stay on long enough for me to read what it says under the microphone and speaker box after clicking on the connection icon; all I have time to see is "can't access sound card". The thing is, I can hear the millisecond of ringing tone, the sound it makes when the call drops, and all other sound Skype makes, so it's not a question of all sounds being on mute, but for some reason it says I have a problem with playback and recording device! Why is that?? I already searched here in the community Q&As for possible solutions to fixing the problem, but double-checking the audio settings under Tools > Options has not changed anything unfortunately. PLEASE HELP!!!

    I've never seen that message.  What exactly did it say?  You're using the native media from the T3i, it hasn't been converted, it's never been inside of Final Cut Pro?

  • Problem with Playback device on windows 10

    Just today i downloaded the new Windows 10 update and i like it for the most part. But i went on skype today for a video chat and a pop up came up saying that i have a problem with playback device and i cannot video or voice call. skype worked fine yesterday on windows 8, need solutions ASAP.

    Do minimize the chances of having issues with other audio/video devices: 1.  Uninstall Cyberlink Webcam Splitter.  It my not work properly in Windows 10.2.  Disable Stereo Mix. You can also download and install the latest Realtek Driver suite even if you have the latest/same drivers installed.  The suite can resolve issues. Download and install the latest generic Realtek audio drivers (High Definition Audio Codecs - 64bit Windows 10)http://www.realtek.com/downloads/ I've outlined most of the causes and solutions here:http://community.skype.com/t5/Windows-desktop-client/Problem-With-Playback-device/m-p/3356467/highlight/true#M282763 

  • Having problems with playback being quiet after burning to CD

    Hey everyone..
    OK... this is a weird one... well im hoping its an easy one and im just missing something.
    OK so i edit music together for a dnace group so ts basically blending songs together using MP3's. Once finished i create a mixdown and burn to CD.
    The problems occurs when we perform at venues with big sound systems :It just plays back quiet when everyone else music is fine :S but when we play it on a normal to medium size system its fine.
    Please help as its so frustration.
    Thank you in advance

    This could well be one of the few genuine examples of "everyone is out of step but me".
    There is a tendancy these days to burn CDs at the hottest possible level and also to over compress the music so it has little or no dynamics (and very little "life) left.  I suspect the other CDs are burned like this.  On a controlled system, your versions probably sound fine but compared to the over-hot, over-compressed stuff, yours sounds quieter.
    That said, theatre venues can be remarkably noisy places for playback.  A shuffling, coughing audience, air handling, candy wrappers and (nowadays) the scourge of moving lights can mean you compete with a lot of background noise.
    My main involvement in sound is for live theatre work so I prepare a lot of CDs for playback. When that's the only use I'm going to have for the CDs, I tend to put in higher levels and more compression than I would for normal listening.  However, I tend to do this "by eye and ear" rather than using an automatic compressor.  My method would be:  (look away, Steve G...I'm going to mention hard limiting.)
    1.  Prepare my track in the normal way.
    2.  Normalise to -.1dB.
    3.  Examine the Audition display of the whole track.  Generally, there will be a few transient peaks that represent the highest level with most of the track being a few dB lower.  I note the level of the highest "general" part of the track.
    4.  In Edit View, I use Effects/Amplitiude/Hard Limiting to hard limit the track to -.1dB and I  use the "Boost input by ____ dB" to raise the signal so the "general" level is now the maximum.
    Obviously this requires a bit of a judgement call do decide what you consider the "general" level.  However, with a bit of practice you can get you levels as high as possible without killing all the dynamics.
    The other thing to say is this only works if all your tracks are reasonably similar.  If, since you're putting together a medley of different tracks, there are huge differences to start with, you should even these out during the mix process.
    Hope this helps.
    Bob

Maybe you are looking for

  • How do I restart my Apple ID ?

    My iPad is telling me that I need to change my purchase method, it will not let me download apps not even free ones maybe if I reset my accord and delete the payment method it will let me down load apps but I do t know how to do this

  • ABAP-SALV Collect statement

    Hello, I have a header and an item table which contains customer records in the header table and line items in the item table . A Customer has many billing document and hence there are a lot line items with the same material. I want to use the collec

  • Recommandations for upgrading from 46C to ECC 6.0

    Hello Our SAP system landscape is actually in 46c and is only composed of 3 servers with almost 40 users declared (25 actives) on production system. Modules FI/CO HR MM are actually implemented. We plan to upgrade the system to ECC 6.0 between March

  • Export CSV Cmdlet goes to infinite loop

    I'm trying to aggregate data from various CSV's into one using the following line of code " ls -n *.csv | %{ ipcsv $_} | epcsv allinone.csv -NoTypeInformation "  It worked fine until I changed the exported csv name to OneWorldFile.csv. It looks like

  • Error: webuijsf not found

    Hello, I updated my Develop-PC to JDK 6 Update 2 and use NB with VWP 5.5.1 and SAS. After I upgraded the underlying JDK to 6 Update 2 I get errors in my JSF-Pages. The actions are not performed and I get an "Error on this page" saying that "webuijsf