Problems installing iAS6sp3 testdrive on w2k with iWS4.1

Hi,
I am on day 2 of installing iplanet 6 app server, I am not too
worried yet as I see it can take up to 3 days.
I have got around the DNS problem with the registry
(My
Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Tcpip\Parameters)
and got it to put some files on the hard disk. However there appears to
be no services registered and no entries in the start menu after
installation and reboot.
I am running
W2K sp2
iWS 4.1 sp3
iAS 6 sp3 testdrive
Any ideas?
Thanks
Dave

David Vanstone wrote:
>
Hi,
I am on day 2 of installing iplanet 6 app server, I am not too
worried yet as I see it can take up to 3 days.
I have got around the DNS problem with the registry
(My
Computer\HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\Tcpip\Parameters)Shouldn't that be CurrentControlSet? ControlSet001 and ControlSet002 are
backups?
>
and got it to put some files on the hard disk. However there appears to
be no services registered and no entries in the start menu after
installation and reboot.On unsuccessful installation, the Directory Server adds itself partially
and can cause troubles afterwards.
I would advise to do the installation from scratch and making sure the
directory has been completely removed before doing a new installation.
Please check the archive of this list for tips and instructions on how
to clean up broken installation and setting up your dns suffix before
installation.
Installation is very straightforward provided your network settings have
been carefully prepared and configured. Unfortunately, once you have a
failed installation, trying to recover from it and reinstalling is not
so straightforward.
>
I am running
W2K sp2
iWS 4.1 sp3
iAS 6 sp3 testdrive
Any ideas?
Thanks
Dave--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (iPlanet)
iPlanet e-commerce Solutions
Sun Microsystems Australia Pty Ltd

Similar Messages

  • Problem Installing 817 on Windows 2000 with RAID Array

    I am having a problem installing Oracle under windows 2000 which has 2 x 60 GB discs configured in RAID array. When I run the setup program the cursor goes busy for about 10 seconds and returns back to normal and nothing happens !. No errors nothing.
    However when I run the Object Manager in the ods_preinstall directory it starts but in the log file I get the following error message:-
    02/14/02 09:46:18 : (892) : Error in IO Control call for disk PhysicalDrive0 (Error 21)
    02/14/02 09:46:19 : (892) : The count = 28
    02/14/02 09:46:19 : (892) : The signature is 0x443aa035
    02/14/02 09:46:19 : (892) : Error: First Partition of the disk must be an extended disk
    02/14/02 09:46:19 : (892) : Found the partition: 7
    Any idea whats happening....? Has anyone seen this before. Do I need to do something special in teh RAID..?
    TIA
    Martin

    Here are some possible solutions:
    1. The installation notes state that you must be logged on as Administrator to be able to install 9i. Are you logged on as the Administrator? Being logged on as user01 with Administrator priviledges isn't the same as Administrator.
    2. Is the disk full? If I remember my installation correctly, I needed 3 times the size of the files. The documentation will tell you how much space you need.
    Hope these two questions help
    Regards,
    Michael

  • Problem Installing  IDES 4.7 SR1 with Oracle 9.2.0.1.0

    Hello everyone,
    I have problems installing SAP IDES 4.7 SR1  with Oracle 9.2.0.1.0 on my desktop pc..I got problems in the very begining when using Oracle Universal installer:
    --When I tryied to install Oracle(using Oracle Installer) for the first time I received error - pop up box at 16% with some file 'oraocci9.lib'. I was able to find the file under directory C:\oracle\ora92\oci
    lib\msvc  but still I wasnt able to continue for some reason..
    -- Now when I try to reinstall Oracle from scretch I have even more  errors : When I chose 'select the a databse suited to your needs' and chose General Purpose
    I got the message:
    ..'The folowing running service need to be shutdown before continuing : OracleMTSREcoveryService..'
    --Oracle universal Installer doesn't show that I got  something to uninstall - but still I got this MTS running?Can someone tell me how to uninstall everything and start from scratch again..
    If anyone got idea - please help , or BEST will be if someone got <b>THE DETAILED 4.7 IDES with Oracle 9i INSTALL PROCEDURE PLEASE EMAIL</b> me at: [email protected]
    Highly appreciate any help!!
    Thanks ,
    Bob
    P.S I have done all requitements :
    OS Windows 2003 server installed on C partition Oracle Home resides on C  and created 68 GB D partition for Oracle database files and Sap..

    Hello Bobi,
    Install the Oracle first (choose without database option) then install IDES.
    Regards
    Kariyath

  • Problems installing NI-Kal 1.9 with Opensuse 11.1

    I am trying to install Labview 8.6.1, Daqmx Base 3.2, and Ni-Kal 1.9 on a laptop running Opensuse 11.1 to use with a usb device, NI-9233.  I understand that 11.1 is not supported and we have successfully used 10.3, Labview 8.5, and Nikal 1.7 on another laptop.  However, we want to use the latest OS so stay more up to date.   I have used our previous steps of install that I posted here in case it helps.
    The problem seems to either be with building or loading the nipalk module.  I have successfully installed Labview, Ni-Kal, and mx Base and can successfully run updateNIDrivers but when I run lsdaq I get the following:
    Detecting National Instruments DAQ Devices
    Found the following DAQ Devices:
    libnipalu.so failed to initialize
    Perhaps you need to run updateNIDrivers
    /usr/local/bin/lsdaq: line 7:  4825 Aborted                 /etc/natinst/nidaqmxbase/bin/daqmxbase_listdevices
    When I run a vi using the usb device, Labview simply crashes.  Before the successful install I had problems installing Ni-Kal.  Opensuse 11.1 installs a pae kernel by default so I reinstalled Suse without it, passed mem=4096 to the boot loader and built the new kernel and modules with the commands:
    make
    make modules_install
    make modules install
    After these steps everything goes on without errors but I run into the problem I mentioned above.  Also, after this, no kernel modules are loaded.  I see no ni modules with lsmod.  I can manully load nikal but when I try to load nipalk I get:
     # modprobe nipalk
    FATAL: Error inserting nipalk (/lib/modules/2.6.27.7-9-default/kernel/natinst/nipal/nipalk.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    and niorbk gives:
      #modprobe niorbk
    WARNING: Error inserting nipalk (/lib/modules/2.6.27.7-9-default/kernel/natinst/nipal/nipalk.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    FATAL: Error inserting niorbk (/lib/modules/2.6.27.7-9-default/kernel/natinst/nicore/niorbk.ko): Unknown symbol in module, or unknown parameter (see dmesg)
    Has anyone seen this or know what the problem could be.  Thanks.

    Jeff
    Thank you for posting to the forums. I have noticed that there is a common thread about NI-KAL breaking on openSuse 11.1 on our Linux Users Community.  That community is kept up by a couple of our Linux guys and one of them who is on there regularly is one of the developers so that is a good place to go for Linux support. As you mentioned openSuse 11.1 is not supported at this point because I know there have been issues with the install of certain drivers. If you do manage to find a work around please let us know as I know there are a lot of Linux users that would be interested to know, myself included. 
    The specific post about NI-KAL breaking on openSuse can be found here.  Hope this helps.
    Aaron W.
    National Instruments
    CLA, CTA and CPI

  • Problems installing Photoshop CS2 on mac with OSX 10.8.3

    I get error message installing Photoshop CS2 on Mac with OSX 10.8.3

    they're not compatible: http://roaringapps.com/apps:table/tags/_a/index_tags/_a

  • Problems installing, pop-up saying error with configuring during intsalation?, problems installing, pop-up saying error with configuring during intsalation?

    Im having problems installing itunes in my windows 7. popup stating that there was a problem configuring during instalation

    I'm having this same issue since last week but I'm running Windows 7 32 bits, any suggestion?

  • Problem installing both 8.1.7 with 6i reports

    I am installing 8.1.7.0 with patch 4 onto windows 2000 , after i am installing reports 6i into the same machine.
    apparently when i install 6i , it interferes with a software program called EZACCESS where i loss it path..
    ezaccess does use oracle for its backend.
    appears that they both don't want to exist on the same machine.If i don't install 6i, the software is fine.
    any advise to install 8.1.7 and 6i regarding %oracle home%
    would be appreciated.
    Ellery

    Hi,
    Try installing developer 6i in diffrent oracle home.
    Hope this will help you.
    Regards
    Gaurav Thakur

  • I've had a problem installing Adobe Flash Player; also with Firefox. Tried to download a new FF; it goes crazy! keeps repeating an opening page! Now I don't have FF installed, or Flashplayer, and I think these problems are connected. Help!

    Mac OSX 10.5.8 system. Problems have been ongoing with the Firefox I had installed a while ago: would open browser in Safari, and FF would take over; keep asking me to personalize my browser program. In truth, Firefox was kind of "taking over", and I wasn't happy with it. Usually open the internet in Safari.
    Present problems started with trying to download, install and open a few new games. Kept telling me I needed to install Adobe Flashplayer. I could download it, but it wouldn't install. Downloaded both the Flashplayer installer AND the Flashplayer uninstaller a number of times. Today, I decided to get rid of the Firefox on my hard drive and download a newer version - then try again to download Flashplayer and install. The new FF download just kept opening a new browser page.

    What is your current Flash Player version: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html ?
    What is your display adapter, driver version & date?  See http://forums.adobe.com/thread/945765

  • Problems installing Xi 3.1 sp3 with Oracle DB

    Hi,
    I'm trying to install BO Xi 3.1 sp3 (Windows server 2008) and I want to use Oracle (11g) for my CMS.
    I saw the note n° 1351851, so I used the provided MySQL server to install and then run de CCM to change CMS source with my Oracle Database... but It doesn't work !!
    I have a strang error message
    "Cause loading shared object failed...failed because of error [%1 is not a valid Win32 application.]
    Second tried to load library D:BOXi31....oci.dll failed because of error : the specified module could not be found"
    Any help would be appreciated !
    David

    Hi Sarang,
    Thank you for your answer. Indeed, the problem is about the Oracle Client installed on the Server.
    It works fine to access the Oracle Db... but, I realised that this version of Oracle is a 64bit program... and BO Xi 3.1 sp3 is a 32bit version. I guess that the problem could be solve using a 32bit version of Oracle client.
    I'm going to try this today. I'll let you know the result here.
    David

  • Problems installing windows program on imac with yosemite 10.10.1

    I am installing a windows program on my imac using wine/winebottler, a skin. I have used this in the past with many programs and had no problems but I now have Yosemite installed and below is the error log I am getting. Can someone please tell me what is going on and how to fix in non-techy terms?
    System:  imac, mid 2011, 2.5 ghz intel core i5, 4 gb ram

    Thank you for your reply rkaufmann87 for your reply, but this is not a fix for my problem. My iMac does turn on and my screen is working perfectly. The problem is that it reaches 1/3 of the loading bar of Yosemite and freezes. I explained my problem in details in the post above.

  • Problem installing Acrobat Reader on Mac with Mavericks (with error)

    I tried ALL the ways to install Acrobat Reader on my Macbook with Mavericks, nothing worked!
    It says "Error 301" or something like that and I already tried to download the enterprise version, the offline version, to change the login settings of my macbook. Nothing works...
    All started when, at a certain point, I don't know why, it stopped working opening pdf files, saying "error, the file could be damaged or you need an updated version of Adobe Acrobat Reader", so I uninstalled the app and tried to install again. It was when I realized that the mission was harder than  I thought!
    Please, if anybody with the same problem solved it yet, please please share it with me!
    Thank you!

    I'm sorry, part of it is in portuguese!
    How can I post here the install.log file?
    Thank you so much!
    PS: Apparently the error now is different, with no number ..

  • Problem installing Apple Mobile Device Support with iTunes 11.1

    I am running Windows 8 and was running the previous version of iTunes along with support for my iPad2, iPhone4s and iPhone5.  Everything was working perfectly. 
    Yesterday, I performed the OTA upgrade of ios7 on my iPhone5.  When I connected the phone to my PC, iTunes said that I needed to upgrade to 11.1.  So I did, except that it rolled back saying that it was unsuccessful and to try again.  I then downloaded the standalong iTunes64 installer.   The new version of iTunes installed, however the Mobile Device Support was not working.  iTunes did not recognize the phone and Windows device manager showed a driver problem.
    So, I then followed the instructions in http://support.apple.com/kb/HT1923 to uninstall all things Apple from my PC.  I then rebooted/reinstalled.  Same thing happened.  I uninstalled everything a second time, and then went thru the registry searching for "apple" and "mobile device" and removed all references.  This took a while.  I rebooted and reinstalled once again.  Same thing once more.  I then extracted the files from the iTunes64 installation exe and attempted to install just the mobiledevicesupport.msi.  It keeps rolling back with an unspecified error.   The error code in the Windows event log is 1603.
    I then unpacked the mobiledevicesupport.msi file, went to device manager and told it to find the driver, pointing it directly at the new driver files.  No good, I get some "operation not supported" type message.
    I am out of things to try.  Any ideas would be appreciated.  Thanks.

    So, all is done!
    With the "Microsoft Windows Installer CleanUp utility installer file (msicuu2.exe)"
    I could clean uninstall the "Apple Mobile Device Support".
    Hope, this will help other people.
    (o: andreas

  • Problem installing XP on Qosmio G50 with preinstalled vista

    Hello everyone, just joined, and after some browsing I believe 'll like this place.
    I just bought a Qosmio G50 10 with preinstalled Vista and I would like to install XP on the second hard drive to have double-boot. It starts well but after it finishes loading drivers etc it says "starting windows" and then I get a blue screen.
    I know the installation CD is good. This portable is new on the market and there isn't much info about it.
    Even Toshiba does not seem to have drivers for it to download.
    Reading here and elsewhere shows that a driver problem might be the cause, but I need help.
    Thanks.

    The BSOD is because XP doesn't have a driver for your hard disk, so it panics because it can't find the hard drive.
    I also had this problem, following the steps at http://www.msfn.org/board/lofiversion/index.php/t124213.html solved it.
    Basically, here is what you have to do:
    1. Get a copy of Win XP with SP2 to get the SATA support. Note that it _does not_ have drivers for your HD, so this by itself is not enough!
    2. Get the Intel Matrix Manager "F6" drivers from Intel website ( http://downloadcenter.intel.com/Filter_Results.aspx?strOSs=All&strTypes=All&Produc tID=2101&OSFullName=All%20Operating%20Systems&lang =eng - be sure to pick the F6 Floppy Driver package that matches your 32- or 64-bit XP ).
    3. Download a copy of nLite to use to make a custom Windows XP Install CD
    4. Copy your WinXP CD (all the files) to some folder on your HD.
    5. Unzip the Intel Drivers.
    6. Run nLite, pointing it at the folder you created in step 4. Choose only the options to add drivers and to create an ISO image. For the add drivers, use the multi-driver folder option and point it at your unzipped Intel drivers folder from step 5. You want the "text mode" driver - pick the one that matches your controller (ICH9M-E/M SATA AHCI).
    7. When you get to the disk image page, DON'T try to use nLite to burn the CD. Have it create an image (.iso). nLite always locked up for me if I tried to use it to burn CD.
    8. Find your .iso in explorer, right click and do Send To menu to bring up the TOSHIBA burn image to CD. Use that to burn it.
    This will get you an XP SP2 CD that will successfully install on your G50. At least, it did for me, using the Vista 64 environment that came loaded with the laptop. You will also need to go into BIOS (er, Hardware Setup) by holding down ESC when you power on the laptop. On the first page, on the right hand side, change the boot order to one of the options that list CD-ROM first. Otherwise the laptop will happily ignore your shiny new install CD.
    Hope that helps!

  • Problems installing Phototshop CS5 on Win7 with previous Creative suite 4

    I have Creative Suite 4 installed but only want to upgrade to CS5 Photoshop. Would like to deactivate CS4 Photoshop only, but appears you have to deactivate the whole suite.So left the Suite intact before installing lastest version of Photoshop.
    Installed CS5 Photoshop (trial version) and appeared to load ok but  had these errors at the end:
    EXIT Code 6
    Summary 15 errors and 16 warnings
    It appears to work, but do these error messages mean it is not installed correctly? Am I am still on the long road to recovery?

    There is no upgrade to just PS CS5 from Creative Suite 4.
    Did you install PS CS5 trial in the Admin mode? When you downloaded the trial there should have been a folder on your desk top with 2 files in it. Right click on the .exe file in that folder and choose run as Admin. Another folder will show up on your desktop. This folder will have extracted files in it. Look for the Photoshop install .exe file, right click on that and choose install as Admin so the install will get the correct security levels for install. When the screen pops up choose 30 day trial.
    Now, the first time you run Photoshop you need to Right click on the PS Icon, 64 bit or 32 bit, Choose properties, Compatibility tab and again put a check mark in run as Admin. Hit apply then Ok to close. Run PS CS5
    Not sure what the errors are about. But it may be working ok or it may not be. Don't know.
    Just remember you can not upgrade just to PS CS5. You have to upgrade the Suite.

  • Problem installing Free BSD 64-bit with VMware Player on Thinkpad W510

    I installed VM Ware Player on the latest Thinkpad W510 with a 2.66ghz Intel processor. I am getting an error message indicating that the CPU doesn't support long mode. I was advised by the freenode #freeBSD channel that long mode is x86_64/amd64/emt64. This same channel also suggested that I tell vmware it was a 64bit guest. But I don't know how to do this. How do I do this? VMware Player didn't offer me any user options during the install. Is this something I should setup in the bios of the Thinkpad? Or something else? Is there more than one version of the VMware pLayer?

    Look on BIOS if VT is enabled.
    Best regards.
    IPnaSh
    First Spanish Community Guru - Colaborador ad honorem

Maybe you are looking for