Problems installing Windows XP

I need to install Windows on my Mac to enable me to run my husband's accounting software. I partitioned my hard drive via Bootcamp successfully. I then tried to install my brand new Windows XP disc, the Mac shut down and then when it rebooted the screen was black with a flashing cursor and I was unable to do anything. I have tried the disc a number of times and the same thing happens. I have even tried another XP disc and the same thing occurs. I have contacted Apple care and they say to take up with Windows.
Has this happened to anyone else? For info this is a Windows XP Home Edition with SP2 version. I really need to install Windows this weekend. Any help you can offer would be appreciated.
Thanks
Mel

The problem may be the result of not choosing the correct disk formatting option when you loaded XP.
If I am correct, I suggest you delete the partition, re-run Boot Camp and partition, run XP installation again and when you come to the window ‘Windows XP Professional Setup’ you will see four options with the first option highlighted.
You must choose the second option ‘Format the partition using the FAT file system (Quick)’
Complete your XP installation procedure and you will get an automatic re-start into XP.

Similar Messages

Having problems installing Windows 7 on my Macbook Pro w/Boot Camp

Having a problem installing Windows 7 Home Premium (64-Bit) on my Macbook Pro (mid-2010) 13". I use the Boot Camp Assistant, download the necessary drivers and burn them to a disc. I insert my legit Windows 7 install disc, and the process begins but once I get to 'Completing installation', my mac freezes and I have to restart it and delete the partition. This has happened twice. I have contacted Apple and Microsoft and neither of them said that they could help me with the problem so if someone has had a similar issue and found a solution to it, I would really appreciate the help.

Hi S,
You may want to post in the Boot Camp forum where more of those experts hang out: https://discussions.apple.com/community/windows_software/boot_camp

Problems installing Windows 7 from a USB stick

I have got a brand new W510 that i am doing a clean install of Windows 7.
However i have faced major problems with installing from a USB stick attached to the W510.
Please notice that there isn't any problem installing Windows 7 to my other PC from this USB stick, this problem is only present with W510.
I have the BIOS from Lenovo v 1.35, Bios settting are reset to default to isolate any faulty settings.
In the readme file the say they have fixed some USB detection problems by Windows. bug still present??
Version 1.35 (BIOS ID: 6LET74WW) [for BIOS ID 6Lxxxxxx-based computer]
[Problem fixes]
- Fix an issue that a USB device is not recognized by Windows connecting
to USB 3.0 port.
Below is picture of the problem.
First i choose to boot from my USB Stick Sandisk Cruzer which Windows 7 files are placed, i know these files and the USB stick works with my other computer.
Picture 1
Next step when it boots
Picture 2
I press Install Now
Picture 3
This warning message comes up, can't find driver device
Picture 4
I click browse and try to find my USB stick, none of my USB sticks are listed, is this a Lenovo BIOS bug or Windows 7 Installation detection problem??
Picture 5

I think you need to fix your links, you seem to have maybe copied the post from another board / forum, the link style you have inserted doesn't work here.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Problem install windows on mid 2010 MacBook Pro 13 with 10.9.1

I run into problem install windows on mid 2010 MacBook Pro 13 with 10.9.1. Boot Camp Assistant shows error "Can't install the software because it is not currently available from the Software Update server.". So what is the problem and how can I work around it? I also tried to only chose "Install Windows 7" option, but it could not recognize my windows dvd (which I created from ISO). Any help is appreciated.

I run into problem install windows on mid 2010 MacBook Pro 13 with 10.9.1. Boot Camp Assistant shows error "Can't install the software because it is not currently available from the Software Update server.". So what is the problem and how can I work around it? I also tried to only chose "Install Windows 7" option, but it could not recognize my windows dvd (which I created from ISO). Any help is appreciated.

Problems installing windows 8 on a mac

Hi to all,
I am having problems installing windows 8 on my late 2010 mac book pro. I have created the boot camp partition on the hard drive and have begun the windows 8 install. I have reached the point of where you need to restart the mac and have tried to restart only to find that I can't, so I have pressed the power off button to switch off. Then I press power on and have come to the black screen with the writing no bootable device detected, insert a disc then press any key. I have tried this but nothing happens, I have tried the mac osx disc, and still nothing happens. How do I reboot my mac, anyone????.
Cheers

Scurran08 wrote:
Thanks bob,
I have read elsewhere on the Internet that windows 8 is supported on bootcamp and that it works.
Sometimes yes, often no, but it is unsupported officially so you'll have to live with it.

Problem Installing Windows 2008 R2 in BladeCenter HS21 in IBM Storage DS3400

Please someone help
me ..
Hi I have problems installing Windows
Server 2008 R2 on BladeCenter
H (HS21) using IBM Storage
DS3400 (fiber)
I can map the drive to
Hojilla HS21, and the installation
wizard start Windows Server 2008
can see the mapped achieve 60GB
hard drive.
When I try to install it shows me the following
error:
"Setup was unable to
create a new system partitio
or locate an existing system
partition"
It's like that but puediera
create the system partition.
I add the (LUN 0),
and the Logic Controller and
Fiber the place to make a Boot's
(LUN 0)
Please someone give me a solution
to solve this problem.
I used a translator in English because
I only speak Spanish
Thank you.

Hi,
Please check if file allocation size is 4k for boot/system partition. Windows basically does not support non-default file allocation size for boot/system partition.
For more detailed information, please refer to the thread below:
Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
http://social.technet.microsoft.com/Forums/en-US/42b1023f-ed59-48cb-ab29-4360b8ca457a/setup-was-unable-to-create-a-new-system-partition-or-locate-an-existing-system-partition-see-the?forum=winserver8setup
You could also follow the article below to troubleshoot the issue:
Error message when you try to install Windows Vista: "Windows is unable to find a system volume which meets its criteria for installation"
http://support.microsoft.com/kb/938984
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problems installing Windows 7 on new iMac?

I've heard from users on other forums that there are some problems installing Windows 7 on the new iMacs, mainly that the display goes blank partway through installation due to some kind of driver issue. Can anyone confirm this or elaborate? I've heard there is a workaround but it sounds a bit complicated and I'm wondering if I should just wait until Apple patches Boot Camp with full Win7 support.

I would wait until Apple updates Boot Camp to officially support Windows 7.
http://support.apple.com/kb/HT3920
FYI - There is a forum for Boot Camp
http://discussions.apple.com/category.jspa?categoryID=237
so you may find more useful information there.

Problems installing windows on new retina macbook pro

Hi i am having problems installing windows on the latest retina macbook pro, I end up getting an error , cant install windows on this GPT partition style. I have tried booting into windows , and EFI, but it all ends up with the same error. Please HELP.

Did you use Boot Camp Assistant to partition the drive? If you want both Windows and Mac OS X on your Mac that is what you have to do.
If you only want Windows then you can install it by itself but you have to delete all partitions on the drive and format it NTSF from inside the Windows installer or a third party Disk Management/Partitioning/Formatting program.

Problems installing Windows 7 with boot camp, cant find the cd/dvd driver...

I´m having some problems installing Windows 7 on my new 12,1 (21,5) iMac with boot camp. When the computer restarts and the Windows 7 setup begins, i get the message that the cd/dvd driver cant be found, so i can't continue the installation. I've tried searching online for the driver, but can't find it. The cd/dvd seems to be a OPTIARC cd/dvd ad-5690h, which seems to be produced by Sony. I have a authentic windows 7. I even tried loading everything ver to a usb-drive, but then it wont boot.

After reading around on this, and other forums I tried to burn a new dvd at reduced speed(2x), but that did'nt work either... I have an authentic windows 7 iso, downloaded with serial, is there any way to boot this from a jump drive or external hdd?

Problems installing Windows XP on at K7N2G-ILSR

Hi,
I am having problems installing Windows XP on at K7N2G-ILSR.
Config.
K7N2G-ILSR
With 2 120 GB Western Digital WD1200JB drives
Liteon CDRW and Toshiba DVD
Memory ME-512MB-PC2700 DIM/DDR333/512MB/PC2700
Bios settings are all set to default. And at 4/2003 version
The WD drives are plugged into IDE1 with one as Master and the other Slave. The CD & DVD on the IDE2 with the CDRW as master and the DVD as Slave.
Boot to Dos the Drives are seen with no problem
Try doing a clean install and the System always hangs after initial driver load and Hangs when Blue Screen states "Setup is installing Windows"
Any Ideas?
Thanks

Have you tried changing the APIC function in BIOS. Either disable it or set it to MPS 1.1 see if that helps.
Also make sure your FSB is 100MHz and make sure your jumpers on the mobo are correctly set up. There are a lot of installation issues relating to FSB and win XP.
And finally make sure your memory is fully compatible with nForce boards. The default answer to everyone's nForce platform problems.
Psymon

Problem installing Windows 7 64-bit on late 2013 iMac 27"

Is Windows 7 64-bit compatible with this computer?
Hardware and software:
• Late 2013 iMac 27", 3.5 GHz I7, 16 GB memory, 1 TB hard drive (no fusion drive)
• Mac OS 10.9.1
• USB thumb drive
• Boot Camp Assistant 5.1.0
• Windows 7 64-bit install disk iso image downloaded from Microsoft
Install steps:
1. Use Boot Camp Assistant to install Windows 7 install (from iso image) and Apple Support Software (creates WININSTALL USB drive)
2. Use Boot Camp Assistant to create 50 GB Windows partition on iMac internal drive and start Windows install
3. Complete initial install steps until given option to select install partition
4. Select 50 GB partition. Error message that partition is not formatted correctly. Use Advance Options to format (presumably to NTFS)
5. Select 50 GB partition again and click "Next"
6. Get error message "Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."
7. Install quits at this point
I have successfully installed Win 7 on another computer (2010 Mac Pro) using these steps. I also tried installation on the iMac using an iso image created from my original Win 7 64-bit install disk, with the same installation error as above.
I'm wondering if Windows 7 and/or Boot Camp is compatible with this iMac. Any suggestions will be appreciated.

I am awaiting delivery on the exact model you have and have been researching how much trouble it will be to put 64 bit windows 7 ultimate on my machine when it gets here. I'm not pleased at what I've been reading so far. I have not seen the two other posts but yours is enough to concern me.
Have you also seen that 10.9.1 update may be responsible for this? I've seen where 10.9 caused some problems with the bootcamp app but then the process was completely hosed with the 10.9.1 update. Are you seeing this as well?
Being a life-long mac dude, it pains me when their stuff just doesn't work because it usually just does. ****, that's why I started on a mac in the first place.
The support site says that they come with 90 days of complimentary support. Is this not an issue they should be responsible for addressing via support? Or is that just one long wait on hold waiting to talk to somebody that won't consider this a pure apple issue?
I was also curious if your install .iso contains both 32 and 64 bit versions?

Problem installing windows 8.1 on Bootcamp-yosemite

Hello,
I use iMac(21.5-inch,Mid 2011) and was with OS X Yosemite 10.10.1
I want to install window 8.1 on my iMac by using bootcamp and i have a problem.
First, I have created a bootable USB stick with window 8.1. I started bootcamp assistant and i notice that i have only 2 options: don't have create a window 7 or later version install disk.
So I googling the internet a lot then I found it on youtube. I change the plist file in boot camp assistant by deleting pre and add code on terminal. Then i got a first option(create a window 7 or later version install disk).
I made again a bootable usb stick with window 8.1 from ISO with the bootcamp assistant first option. Then when i restarted the Mac keeping the ALT-Option pressed it was only Macintosh HD , recovery-10.10 and EFI Boot.
Why i don't have window partition? I'm so confused. What i've miss?
Please help,
Thanks.

pungpoui wrote:
I use iMac(21.5-inch,Mid 2011) and was with OS X Yosemite 10.10.1
I want to install window 8.1 on my iMac by using bootcamp and i have a problem.
First, I have created a bootable USB stick with window 8.1. I started bootcamp assistant and i notice that i have only 2 options: don't have create a window 7 or later version install disk.
From iMac (21.5-inch, Mid 2011) - Technical Specifications, you have a iMac with a built-in Optical drive.
Slot-loading 8x SuperDrive with 4x double-layer burning (DVD±R DL/DVD±RW/CD-RW)
From Boot Camp 5.1: Frequently asked questions - Apple Support
Can I install Windows from an ISO image?
To find out if your Mac supports that feature, open Boot Camp Assistant, then click the Continue button. If you see a checkbox labeled “Create a Windows 7 or later install disk,” your Mac can install Windows from an ISO image.
Is your iMac Optical drive not working?
So I googling the internet a lot then I found it on youtube. I change the plist file in boot camp assistant by deleting pre and add code on terminal. Then i got a first option(create a window 7 or later version install disk).
I made again a bootable usb stick with window 8.1 from ISO with the bootcamp assistant first option.
This creates a new set of problems and on older Macs does not work very well. Bootcamp Assistant sets the Mac NVRAM to boot from the Optical drive.
Then when i restarted the Mac keeping the ALT-Option pressed it was only Macintosh HD , recovery-10.10 and EFI Boot.
Why i don't have window partition? I'm so confused. What i've miss?
EFI Boot is the Windows installer.
On your Mac, you need to use both a USB and a Physical DVD to install Windows.

Problem installing Windows 8.1 on MBP

Ok so I was having bluetooth issue in Windows 7, which is a different issue, so I decided to try Windows 8.1 Pro X64
Using boot camp I get to the part where Windows is asking where to install.
I choose Drive 0 Partition 4: Boot Camp and format it.
Once that is done I click next and I get a message at the bottom saying:
"Setup was unable to use the existing partition because the system volume does not contain the required free space."
Is this talking about the EFI partition? The EFI partition is showing 1mb of free space
There is also another partition: Drive 0 Partition 3 that has 619MB and 0 free.
Also this is an ISO from a Microsoft MSDN account not the regular one.
I think I may try Windows 8 instead and see if that works. Any idea?
2014 MBP 15" 2.8GHz i7 16GB RAM 512GB SSD

pungpoui wrote:
I use iMac(21.5-inch,Mid 2011) and was with OS X Yosemite 10.10.1
I want to install window 8.1 on my iMac by using bootcamp and i have a problem.
First, I have created a bootable USB stick with window 8.1. I started bootcamp assistant and i notice that i have only 2 options: don't have create a window 7 or later version install disk.
From iMac (21.5-inch, Mid 2011) - Technical Specifications, you have a iMac with a built-in Optical drive.
Slot-loading 8x SuperDrive with 4x double-layer burning (DVD±R DL/DVD±RW/CD-RW)
From Boot Camp 5.1: Frequently asked questions - Apple Support
Can I install Windows from an ISO image?
To find out if your Mac supports that feature, open Boot Camp Assistant, then click the Continue button. If you see a checkbox labeled “Create a Windows 7 or later install disk,” your Mac can install Windows from an ISO image.
Is your iMac Optical drive not working?
So I googling the internet a lot then I found it on youtube. I change the plist file in boot camp assistant by deleting pre and add code on terminal. Then i got a first option(create a window 7 or later version install disk).
I made again a bootable usb stick with window 8.1 from ISO with the bootcamp assistant first option.
This creates a new set of problems and on older Macs does not work very well. Bootcamp Assistant sets the Mac NVRAM to boot from the Optical drive.
Then when i restarted the Mac keeping the ALT-Option pressed it was only Macintosh HD , recovery-10.10 and EFI Boot.
Why i don't have window partition? I'm so confused. What i've miss?
EFI Boot is the Windows installer.
On your Mac, you need to use both a USB and a Physical DVD to install Windows.

Problem installing Windows (7, 8.0, 8.1) on BOOTCAMP - Mavericks

Hallo guys,
First I want to say thanks a lot to Christopher Murphy, because one and a half years ago I was having problems the same like the 1st post on that topic and with the instructions from Christopher I was able to get back my BOOTCAMP with Windows 7. Now I think that the commands from the 1st post changed something that is making my current problem appear. All was working like a charm till few days ago when I was get a decision to update to Mavericks.
Previously I was with Mountain Lion 10.8 and with Windows 7 on Bootcamp. The hardware is iMac Late 2010 27'' with 1Tb SATA HDD.
Few days ago I have deleted the BOOTCAMP partition and resized the disk to only 1 partition (with Bootcamp wizzard). Then I made a boot usb stick with Mavericks and then started the installation of Mavericks from my USB Stick. I have deleted all partitions and created a new one when the installation asked me to choose a partition. So everything was fine and Mavericks is ok and working great. Now the problematic part.
I have created a Bootable USB Stick with Windows 8.1 first. I used some windows program to made it which I was using before and never had a problems on normal Computers (PC, not Apple) to boot and installing that windows from the same USB Flash Stick and the same Windows 8.1 and so on. I started Bootcamp Wizzard on my new Mavericks and than I notice that I have only 2 options there:
1. Download drivers
2. Install windows 7 or later version
I have already the bootcamp software support drivers downloaded before and I have leave only the second tick checked.
I tried to press Continue, but the Wizzard told me that it doesn't recognize a Windows DVD and cannot continue. Asked me to insert a Windows DVD and to continue.
Now it's time to say that my DVD device is not working and I cannot use it.
So I was thinking that the problem is coming from my USB Stick and tried few other programs to make a bootable usb stick with windows. That doesn't help.
I started to read and googling the internet. I tried few options from some guys with a close problems. Reset with Options+CMD+P+R, to format USB Stick fully etc. Then I found that if I install daemon tools and mount a Windows 8.1 ISO the Bootcamp Assistant will continue on the next step and will build the BOOTCAMP partition. I made that and restarted the computer with the USB Stick plugged in. I got a message that there're no system disk and to insert one and to press any key to continue (or something like this). Then I made a hard restart and tried to hold the ALT (Option) key after the startup chime. I got the list of bootable devices, but the usb stick wasn't there Only Mavericks partition and HD Recovery one. Tried few more things with no luck.
Then I found a topic where a few guys explaining how to get the 1st option on Bootcamp Wizzard (Create a Windows 7 or later version install disk). I changed the plist file in Bootcamp Assistant, then signed the app with xcode tools and yahoo, I got that option enabled.
I made again a bootable usb stick with windows 8.1 from ISO with the Bootcamp Assistant 1st option. Then when I restarted the Mac keeping the ALT pressed it was a surprise that the USB stick with windows 8.1 showed up. I started Windows 8.1 setup, entered the serial number and then I selected the BOOTCAMP partition and the Next button wasn't active and error message was written that:
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."
I tried format, delete partition, create new etc with no luck. Then I tried to recreate the bootcamp partition with Disk Utility, but with ExtFAT format and again no luck. I found another topic on internet where some guys are talking that only Windows 7 can be installed in that way on Mavericks BOOTCAMP. I don't know that this is true or not, but I tried with Windows 8.1, Windows 8.0 and now I'm going to get a Windows 7 from a friend these days, but I don't think that it will work.
Is there someone who can help me out somehow or to tell me some tips or opinions what to do next?
Here are few infos:
Julians-iMac:~ julianstefanov$ df -h
Filesystem      Size   Used Avail Capacity iused     ifree %iused Mounted on
/dev/disk0s2   558Gi   53Gi 505Gi    10% 13861731 132462763    9%   /
devfs          191Ki 191Ki    0Bi   100%      661         0 100%   /dev
map -hosts       0Bi    0Bi    0Bi   100%        0         0 100%   /net
map auto_home    0Bi    0Bi    0Bi   100%        0         0 100%   /home
/dev/disk0s4   372Gi 2.7Mi 372Gi     1%        0         0 100%   /Volumes/BOOTCAMP
Julians-iMac:~ julianstefanov$
Julians-iMac:~ julianstefanov$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS iMac                    599.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP                400.0 GB   disk0s4
Julians-iMac:~ julianstefanov$
Julians-iMac:~ julianstefanov$ diskutil cs list
No CoreStorage logical volume groups found
Julians-iMac:~ julianstefanov$
Julians-iMac:~ julianstefanov$ sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1170595968      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1171005608     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1172275144          56
1172275200   781248512      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712        1423
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
Julians-iMac:~ julianstefanov$
Julians-iMac:~ julianstefanov$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 1170595968] HFS+
3: AB 1023 254 63 - 1023 254 63 [1171005608 -    1269536] Darwin Boot
4: 0B 1023 254 63 - 1023 254 63 [1172275200 - 781248512] Win95 FAT-32
Julians-iMac:~ julianstefanov$
Julians-iMac:~ julianstefanov$ sudo dd if=/dev/rdisk0 count=1 2>/dev/null | hexdump -C
00000000 33 c0 8e d0 bc 00 7c 8e c0 8e d8 be 00 7c bf 00 |3.....|......|..|
00000010 06 b9 00 02 fc f3 a4 50 68 1c 06 cb fb b9 04 00 |.......Ph.......|
00000020 bd be 07 80 7e 00 00 7c 0b 0f 85 0e 01 83 c5 10 |....~..|........|
00000030 e2 f1 cd 18 88 56 00 55 c6 46 11 05 c6 46 10 00 |.....V.U.F...F..|
00000040 b4 41 bb aa 55 cd 13 5d 72 0f 81 fb 55 aa 75 09 |.A..U..]r...U.u.|
00000050 f7 c1 01 00 74 03 fe 46 10 66 60 80 7e 10 00 74 |....t..F.f`.~..t|
00000060 26 66 68 00 00 00 00 66 ff 76 08 68 00 00 68 00 |&fh....f.v.h..h.|
00000070 7c 68 01 00 68 10 00 b4 42 8a 56 00 8b f4 cd 13 ||h..h...B.V.....|
00000080 9f 83 c4 10 9e eb 14 b8 01 02 bb 00 7c 8a 56 00 |............|.V.|
00000090 8a 76 01 8a 4e 02 8a 6e 03 cd 13 66 61 73 1c fe |.v..N..n...fas..|
000000a0 4e 11 75 0c 80 7e 00 80 0f 84 8a 00 b2 80 eb 84 |N.u..~..........|
000000b0 55 32 e4 8a 56 00 cd 13 5d eb 9e 81 3e fe 7d 55 |U2..V...]...>.}U|
000000c0 aa 75 6e ff 76 00 e8 8d 00 75 17 fa b0 d1 e6 64 |.un.v....u.....d|
000000d0 e8 83 00 b0 df e6 60 e8 7c 00 b0 ff e6 64 e8 75 |......`.|....d.u|
000000e0 00 fb b8 00 bb cd 1a 66 23 c0 75 3b 66 81 fb 54 |.......f#.u;f..T|
000000f0 43 50 41 75 32 81 f9 02 01 72 2c 66 68 07 bb 00 |CPAu2....r,fh...|
00000100 00 66 68 00 02 00 00 66 68 08 00 00 00 66 53 66 |.fh....fh....fSf|
00000110 53 66 55 66 68 00 00 00 00 66 68 00 7c 00 00 66 |SfUfh....fh.|..f|
00000120 61 68 00 00 07 cd 1a 5a 32 f6 ea 00 7c 00 00 cd |ah.....Z2...|...|
00000130 18 a0 b7 07 eb 08 a0 b6 07 eb 03 a0 b5 07 32 e4 |..............2.|
00000140 05 00 07 8b f0 ac 3c 00 74 09 bb 07 00 b4 0e cd |......<.t.......|
00000150 10 eb f2 f4 eb fd 2b c9 e4 64 eb 00 24 02 e0 f8 |......+..d..$...|
00000160 24 02 c3 49 6e 76 61 6c 69 64 20 70 61 72 74 69 |$..Invalid parti|
00000170 74 69 6f 6e 20 74 61 62 6c 65 00 45 72 72 6f 72 |tion table.Error|
00000180 20 6c 6f 61 64 69 6e 67 20 6f 70 65 72 61 74 69 | loading operati|
00000190 6e 67 20 73 79 73 74 65 6d 00 4d 69 73 73 69 6e |ng system.Missin|
000001a0 67 20 6f 70 65 72 61 74 69 6e 67 20 73 79 73 74 |g operating syst|
000001b0 65 6d 00 00 00 63 7b 9a af 3c b0 3c 00 00 00 fe |em...c{..<.<....|
000001c0 ff ff ee fe ff ff 01 00 00 00 27 40 06 00 00 fe |..........'@....|
000001d0 ff ff af fe ff ff 28 40 06 00 80 e0 c5 45 00 fe |......(@.....E..|
000001e0 ff ff ab fe ff ff a8 20 cc 45 20 5f 13 00 00 fe |....... .E _....|
000001f0 ff ff 0b fe ff ff 00 80 df 45 00 e8 90 2e 55 aa |.........E....U.|
00000200
Julians-iMac:~ julianstefanov$
Thanks in advance!
Julian

Looks perfect with the Free Space. You can verify this by running sudo gpt -vv -r show /dev/disk0.
If you try the EFI boot, please pick this Free Space slot, and it will get split into a 128MB MSR and the remainder as NTFS, if the installer finishes successfully. You may be able to install, but a preUEFI model cannot use the MSR to boot the main Windows partition, but a UEFI compliant machine can.
On a Late 2013 15" rMBP (which is UEFI compliant), this is what Bootcamp on GPT looks like. (Notice GPT#4 - MSR and GPT#5 - NTFS).
gpt show: /dev/disk0: mediasize=500277790720; sectorsize=512; blocks=977105060
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 977105059
      start       size index contents
          0          1         PMBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 487712920      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
488122560    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
489392096         32
489392128     262144      4 GPT part - E3C9E316-0B5C-4DB8-817D-F92DF00215AE
489654272 487450624      5 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
977104896        131
977105027         32         Sec GPT table
977105059          1         Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 60821/255/63 [977105060 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 - 977105059] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

Problems installing Windows 7 using Boot Camp

I have a brand new MBP Retina laptop (late 2013) with 256GB SSD. Today I tried to use Bootcamp Assistant to partition the SSD and install Windows 7 64 bit OS.
My first attempt was using a licensed Windows 7 64 bit installation DVD and my OWC external optical drive which is recognized in Finder:
I started Boot Camp Assistant, selected the boxes to download latest Windows Support Software from Apple and to Install Windows 7. I was asked to specify the size for the Windows partition and hit continue. The process was moving along, the computer restarted and then I got a black screen with a blinking white cursor (like a command line prompt) in the upper left corner of the screen and a message to press any key to reboot. Pressing any key did nothing.
As far as I could tell, the Support Software files that were on the USB drive did get installed prior to the first reboot of the system that happens after you allocate the size for the partition. After the first reboot I never got the Windows installer though, just the hanging black screen/cursor mentioned above.
I'm wondering if, after creating the partition and restarting, my computer can't see my external optical drive even though it does show up in Finder when booted to OSX because it was not reading the Win7 Install DVD at all.
While on the phone with Apple Senior Tech Support we rebooted several times holding down the Alt/Option key. The boot options were the OSX, Recovery, Windows, and EFI Boot. Choosing Windows resulted in the trackpad locking up and it just hung there. I ended up reverting the SSD back to a single partition for now.
After some discussion on the Apple forum I tried creating an ISO file from the Win7 64 bit DVD using ImgBurn software that I have installed on my Windows PC and ImgBurn indicated it had created a bootable ISO file. I copied the ISO file to the downloads folder on the MBP, plugged the empty USB drive into the MBP and tried Boot Camp Assistant again:
Choosing the appropriate option for use with an ISO file on a USB drive Boot Camp Assistant proceed to again create the partition, asked me to size it, and then it proceeded (over approximately an hour and a half) to work on copying the ISO file to the USB drive and downloaded the Support Software to the USB drive.
After the restart I got another black screen, cursor, and the messages, "No bootable device/drive found", "Press any key to reboot". Again pressing any key did not do anything. I reverted back to a single partition again, rebooted to OSX and gave up for the night.
Bottom line in either scenario is that I never get to the Windows installer screens to even attempt to install Windows on the new partition.
QUESTIONS:
I think in my situation it doesn't appear that ImgBurn created a bootable ISO file from my Win7 install DVD. The Apple Bootcamp Setup guide refers to downloading the ISO image from Microsoft but I couldn't find anything that I would be comfortable downloading.
I'd rather use my installation DVD for Windows but why isn't that process of reading the DVD from the external drive working after the restart?
Can the ISO file and Windows Support Software live on the same USB drive during installation and does the support software get installed automatically by boot camp assistant?
What am I doing wrong here? This shouldn't be this hard especially when I own a valid copy of Windows.
This is VERY frustrating. Any help or referrals to proper instruction is very much appreciated.

I was able to successfully complete the installation of Windows 7 Home Premium using Boot Camp. Turns out the problem was the Windows 7 ISO image I was initially trying to use. I called Microsoft tech support and they sent me a link (see below) from which I downloaded the Windows 7 Home Premium 64 bit ISO image. After downloading the ISO image and restarting Boot Camp Assistant the process of Boot Camp preparing and transferring the ISO image and Windows Support software to the USB drive took about 45 minutes and then everything went smoothly from there. The only thing I encountered was when I was asked what drive to install Windows on I got a message that it couldn't install on the Boot Camp drive because it needed to be in NTFS format. I clicked on the format button and then the process continued. After Windows installed the Windows Support Software from Apple started to install automatically. So far it is working well.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windo ws-7-home-premium-64bit-iso-download/709dcc12-d120-435d-91cd-52e1dd0f4c24

NTFS format partition problem - install Windows 8.1

I cannot install Windows 8.1 from USB via bootcamp, on Mavericks late 2013 rMPB 15"
When I get towards the end of the Windows Setup screen the Bootcamp partition is showing as not NTFS format
There is no 'advanced options' to click, under the 4 partition options.
I have pressed Option and tried installing through either the 'Windows' partition and the 'EFI' partition - both have the NTFS format problem.

Just hit the 'format' button - looks like it might be working now

Problems installing Windows XP

Similar Messages

Maybe you are looking for