Problems - Javascript errors, when I login Portal from Internet.

I have the following problem:
In order to login SAP Portal 7.0, externally, I created a URL in public host like http://km.mycompany.com,
and that URL redirects me to my portal URL, like http://myserver.mycompany.com:50000/irj., using SAP WebDispatcher
The problem is that if logon to http://myserver:50000/irj (from inside my LAN), I can navigate it OK.
But if I login Portal from the Internet (outside LAN), I have in several pages Portal Javascript errors. I analyzed that these errors occur for example on page User Admin, or the Webdynpro Administrator.
After analyzing a bit, I found that pages that give me javascript errors (for example, "SSR is undefined" or " 'me' is undefined", that dont let me to click buttons or see gifs images, or display /nwa page) occurs in the pages that does not begin with "/irj" but with "/webdynpro/dispatcher. "
any ideas ???
thanks in advance,
regards,
Edited by: Leandro Balboni on Sep 1, 2008 11:44 PM
Edited by: Leandro Balboni on Sep 1, 2008 11:45 PM

Hi,
JavaScript issues 9 out of 10 have to do with FQDN issues.
Anotherthing to check in the WepDisp config is:
wdisp/permission_table = URLpermissions.pfl
Good luck,
Benjamin Houttuin

Similar Messages

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Javascript error when launching XFA pdf from browser

Hi all,
I am trying to use my XFA PDF from a browser. On my local system I have set up a web server and am launching my PDF from there. However, I am getting a ReferenceError with regards to one of my Javascript functions.
My PDF has dependency on a javascript file that resides in the Acrobat path as follows:
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Javascripts\
When I use my PDF directly from an Acrobat instance, everything works fine. The issue comes up only when launching from server. How do I link the javascript file to my PDF?
Edit: The user is going to be launching the PDF from the server via a web browser. In such a case where do I place the javascripts?
Help appreciated,
Thanks

@George: thanks for the quick response!
My JS code contains a readFileIntoStream which I learnt is also to be run under privileged context. (still learning the ropes here.. ). I have been trying to incorporate the JS code directly into the PDF to get around this privileged context.. but I am unable to find a non-privileged equivalent for readFileIntoStream..
Basically my users would be accessing the PDF from the server direct via the browser. For my testing purposes I am able to run the PDF directly from my desktop via an Acrobat instance without any hitch as the scripts are folder level like you mentioned. Is it possible for the users to be able to access the javascripts from anywhere on the server rather than directly from the PDF? Please note, users will not be saving copies of the PDF on to their local machines (in which case we could have pushed the JS file along to their machines) . I need to ultimately run the PDF from browser.
I hope I am clear..
Thanks.

Page not found error when accesing Portal from Internet

Hi,
I'm getting the following error message when accessing Portal as administrator from the Internet:
The page cannot be displayed
Explanation: There is a problem with the page you are trying to reach and it cannot be displayed.
Try the following:
Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped.
Access from a link: If there is a link to the page you are looking for, try accessing the page from that link.
Technical Information (for support personnel)
Error Code: 500 Internal Server Error. The request was rejected by the HTTP filter. Contact the server administrator. (12217)
The error message shows in the rightmost area of the browser.
In the left area I can see the Portal Content
This happens when using Internet Explorer 6, windows XP, sp2.
When using MozillaFirefox, the error won't show up, but I don't have full functionality when trying for example to right-click to create Systems in the SystemLandscape window....
To access Portal from internet, I simply go to http://company.com:50000/irj
Server side Portal installations is as follows:
EP7, SP11, windows 2003 64bits.
Any help will be appreciated.
Regards.

Hi Claudio Roca,
I have encountered the same problem. Do you found the solution for this issue? I will much appreciated if you willing to share your solution and email to [email protected] Thank you so much.
Regards,
Hau Chee

JAVASCRIPT ERROR WHEN DISABLED THE WELCOME AREA

Hi sdn,
I have modified our portal design. I set the welcome area and the logo area to the value none. Now I am always getting a javascript error when I call the side in my browser.
I get the message that an object is missing and the browser can not set the focus to an element ==> because I have disabled two areas of the portal header.
I have recognized this problem in all portal releases from EP6SP2 to EP6SP9.
What can I do to prevent these error messages?

I think this issue is fixed by this note : 798647. Suggested to go with latest hotfix.

Javascript error in Content Admin- Portal Content

Hi Experts,
We have just installed SAP Netweaver Portal 7.0. We get an error of javascript when we navigate to Content Administration->Portal Content and due to this Portal Content Folder is not displayed. While through Super Admin role Portal Content is displayed with javascript error. Please guide us, its Urgent.
Rewards to satisfactory answers.
Regards,
Bharat Mistry.

Hi Bharat
refer to this for the Log file
Physical path of log files in EP server
Portal Runtime Error - Where is the log file?
For javscript problem refer to
Javascript error when loading Portal Content
Portal Content Permissions
Getting javascript error while logging in EP
Thanx
Pankaj

Javascript error when opening CS3 on pc..?

I cannot open ID on my CS3 package using my pc. The error appears twice in a box on screen stating
'JavaScript Error'
'Error Number 45'
'Error string :Object is Invalid'
'Line 387'
also
'JavaScript Error'
'Error Number 45'
'Error String; Object is Invalid'
'Line 428'
there was a problem initially due to program plug-ins reported missing so i tried going onto 'Help' and clicking on 'Configure Plug-Ins' from the drop down menu.
Not sure what i did.. but now i cannot use ID as it shuts down after the javascript errors are reported.
Anyone help?

hi
thanks for all the helpful info
i tried to reinstall INDESIGN only... didnt work same problem.
i tried by uninstalling INDESIGN and then reinstalling it only.... didnt work same problem.
I guess im going to have to do a full reinstall.. not a problem, do i need to contact yourselves to get clearance for a reinstallation?
I had a hard drive crash about 6 months ago and had to reinstall, had to phone Adobe and get an online clearance as id exceeded my sole installation for my CS3 hard copies.
thanks again
Date: Sat, 2 Jan 2010 09:50:57 -0700
From: [email protected]
To: [email protected]
Subject: Javascript error when opening CS3 on pc..?
I'd bet the original scenario was something like you tried to open a file and saw a message that you were missing plugins, or they were out of date, and that you should update or upgrade. That's the typical message you get when you try to open a file saved from a newer version of ID. Unfortunately it's quite misleading -- nothing you do to the plugins will help you in that case, and trying to use newer versions would be disastrous.
You should be able to selectively reinstall just ID. If you have the DVD you can run the installer and do a "Repair" installation, and if that doesn't work, you should be able to uninstall ID, then reinstall without removing the whole suite. If that still doesn't work, bite the bullet, uninstall everything and run the clean script (http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402767&sliceId=1), then reinstall. I'm not sure what happens with a downloaded installer, but I suspect it works the same. I'm pretty sure I read somewhere that to uninstall from a download you need to have it in the same location as was originally used for the installation.
Peter
>

Javascript error in Content Admin- Portal Content- iview Navigation window

Hi friends,
We are in the process of portal migration and as a part of this, we installed NW04 SPS 14 using Rapid Installer and then upgraded it to SPS 18. The components we upgraded are:
Java component
Portal Platform
Knowledge Management and Collaboration
Adobe Document Services
BI UDI
BI MMR
After upgradation, when we logged in to portal, we were not able to see/browse Portal pages/Roles/Iviews/Worksets (PCD Contents) under Content Administration->Portal Content.
Again, whichever window is there for navigation of PCD, we are not able to see the contents of PCD.For e.g. System Administration -> System Configuration.
Does anyone know how to solve this issue?
Regards,
Nilz

Hi nilz,
See this thread:
Getting javascript error while logging in EP
Javascript error when loading Portal Content
Regards, Suresh KB

Javascript error when viewing IE 8 (autosizing popup)

Experiencing script error in IE8 when trying to display webpage created in Robohelp 8. The problem does not exist on other computers in my office.
This function was working and now it is not.
Do I need to change my code some how? I have already tried to reset default setting and deleted some additional tool bar that were added.
I don't know if this problem is with IE8 or Robohelp 8.
At a lost....PLEASE HELP!!!
error reads
Script Error ! An error has occured in the scirpt on this page.
Line 1122
Char 3
Error 'innerWidth' is undefined
Code )
URL: file///C:/Courtroom_Services/ehlpdhtm.js
Monette

Thanks for responding...
Yes, output is Webhelp.
I have generated my project with every change. When a different user uses
my pc the autosize popup windows work.'
I need discover that IE does not support innerwidth, with is in my file
eHlpDtm.js (a file in RoboHelp)
I am not aware of using a rendering plugin such as chrome frame.
Webhelp works fine in Mozilla.
Any suggestion how to fix the problem in IE8
Thanks,
Ms. Monette
                                                                                Willam van
             Weelden
             <[email protected]                                          To
             >                         "Ms. Monette1129"
                                       <[email protected]>
             10/14/2011 12:34                                           cc
             AM
Subject
                                       Javascript error when
             Please respond to         viewing IE 8 (autosizing popup)
             jive-214998122-qq
             [email protected]
              orums.adobe.com

Javascript error when send email using webmail

Dear Sun,
One of our user encounter javascript error when try sending email using webmail below is the error message:
" +https://webmail.ubd.edu.bn/uwc/webmail/comp_fs_lr.html&rev=3&security=false&lang=en&popupLevel=undefined&cal=1&charset=escaped_unicode, Line 1755+
+Permission denied+
"

Hi Shane,
below is the answer you need
What browser is the user using?
=> Firefox and IE
What browsers have you tested where it doesn't occur?
=>I tested all the browser (firefox,IE, chrome) it doesn't happen to me
When did this problem first start?
=>After the user finish compiled his message and click send
What is the exact version of UWC you are running (./showrev -p | grep uwc)
=>Patch: 122793-26 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
Patch: 122793-29 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
Patch: 122793-31 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
Does this error occur all the time? Does it occur for every user, or some users or just one user?
=> Not all the time, so far i just receive one complaint .

Javascript error when editing PCD-Objects

Hello,
suddenly I get a JavaScript-Error when I try to edit rules or pages within the PCD (EP6.0.2.35).
When I use the script debugger I see an "access denied" error when the function
window.frames["ivuFrm_page0ivu1"].document.close();
is called. Sometimes it works though (after a server restart, the 1st edit seems to work).
Any ideas?
Thanks in advance,
Reinhard

Solved it on my own:
We have the portal running as windows service, and therefore had "-Xrs" configured in the java parameters. According to a SAP-Note (to configure ThreadDumps) we deleted the "-Xrs"-Parameter and this seemed to have caused the JavaScript-Errors (!!!!!).
Reinhard

Helpme I have error when I try connect from struts to web service

helpme I have error when I try connect from struts to web service using basic authentication . the error message is
[SOAP Exception: fault code= SOAP-ENV Protocol; msg=Unsupported response content type "text/html" must be "text/xml"; ] Response was <html><body> 401 Unauthorized </body></html>
I'm not using ldap for authentication only xml (jazx-data.xml) ... I already create user with jazn.jar for that user , and I dont know why it still error like that ..
Please helpme I don't have anytime more to find the mistake , ??
I'm using Jdeveloper 9i , and oc4j 9.0.4 Server (Not embedded with Jdev)
But when I use with sample java client it success .....
then I try with Struts the response is unsupported response content type text/html must be text/xml response was 401 Unauthorized

1.The reason why this error occurs is, we are getting non SOAP response when the program is expecting a SOAP response. Did you set the proxy server correctly? Try to handle the exception and see the content type of the response in your program.
2. While creating the client stub u must check an option for authentication for webservice .should solve ur problem.
thanks
sirisha

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error when determining a number from object BI_ODS

Error When determining a number from object BI_ODS and number 01 when flat file source system is assigned to transfer rules of infosource , when activating this error occured .
plz need solution.

Hi,
Number ranges can be maintained through the transaction SNRO. For details check:
http://help.sap.com/saphelp_nw70/helpdata/EN/2a/fa02e3493111d182b70000e829fbfe/frameset.htm
Rgds-
Sonal

Javascript Error while executing BEx querry from browser

Hi Folks
We have been getting a number of Javascript errors while executing BEx querries from the browser.
The various errors that we have been getting are:
'SAPBWItemCatalog' is undefined
'SAPBWJSgdo' is null or not an object
'SAPBWShortCutCatalog' is undefined
We have already looked at SAP Note 783496 and validated the solution.
Is there some specific settings that needs to be maintained for this?

Hi Sandip,
Just spent 2 hours chasing this one so I know how frustrating it is.
Solution:-
Check mime service in SICF - dafault_host/sap/bw/mime - if it's greyed out activate it.
Regards
Nev

Problems - Javascript errors, when I login Portal from Internet.

Similar Messages

Maybe you are looking for