Problems previewing all my sites using Dreamweaver 8 both CF and html.

I have restored my hard drive (from a previous Ghost image)
and now encounter problems previewing all my sites using
Dreamweaver 8 both CF and html.
If I preview (using localhost:8500) I get the message "Unable
to connect, Firefox can't establish a connection to the server at
localhost:8500." IE has similar message.
If I preview (using 127.0.0.1 instead of localhost:8500) I
get the page but no images or CSS loads.
An address such as:
http://127.0.0.1/CFIDE/gettingstarted/experience/index_content.cfm
loads just fine - seems CF is working okay.
All the sites used for testing locally have been used for
some time (years) and work on my unrestored drive.
My thoughts: after I restored my hard drive image I installed
both Norton Antivirus 2007 and resintalled ZoneAlarm. I uninstalled
both of the programs but the problem remains.
Any help is much appreciated. I have spent the last two days
trying to get this to work and as many of you can identify with...I
am supposed to be working....!

Hi,
JSF 1.1 doesn't coexist nicely with HTML components.
So if your goal is to build layouts in HTML then this
will not produce the result you want
Skins in 10.1.3 are slightly different than in 11
(selectors may have changed their names). If you need
to specify the class property to make skins work then
this indicates that the skin selectors you use are
not the correct ones.
FrankHi Frank,
thank you for your help, I'm replacing every html component with adf one, panelGroup, panelHorizontal, panelBorder, objectImage etc... etc... but I have a problem...
I need to put an object component about Macromedia Flash and I cannot find any adf component to replace it. Any idea please?
Thank you again.
Ciao.
Ricky

Similar Messages

Help building an e-commerce site using DreamWeaver MX 2004 and Oracle 10G

I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
I hope some of you can help me get started. Any effort is appreciated.
Cheers

I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
I hope some of you can help me get started. Any effort is appreciated.
Cheers

Is it possible to edit a google site using dreamweaver

I'm using google sites for some of my low price costumers, and i was wondering what options exsist to use dreamveaver to update some of the gadgets like the text gadget.
I know google does not support connecting fully with deamweaver or any other editor for that matter, but are there any plans for doing this in the furture, and what minot things can be doen at the moment ?
Tomas
søgemaskineoptimering-århus

t259 wrote:
I'm using google sites for some of my low price costumers, and i was wondering what options exsist to use dreamveaver to update some of the gadgets like the text gadget.
I know google does not support connecting fully with deamweaver or any other editor for that matter, but are there any plans for doing this in the furture, and what minot things can be doen at the moment ?
Tomas
søgemaskineoptimering-århus
To answer your specific question "Is it possible to edit a google site using dreamweaver" the answer is NO. The reason is that Google does not allow uploading of web pagesusing any means such as FTP. Google provies hundreds of templates to choose from and like you I don't like them at all.
Microsoft had a free service long time ago that allowed you to upload your own pages but this has been stopped for new customers. New customers are required to sign up to their Office 365 Service <http://tinyurl.com/bucc6t4> and this costs money. However, you can build and host a website with a custom domain for your business.using their free software called Microsoft Sharepoint Designer 2010 <http://www.microsoft.com/download/en/details.aspx?id=16573>. I believe they also have a 64 bit version to download but I only use 32 bit on my 64 bit systems!!
Hope this helps.

Hi , unfortunately i faced with a problem that i couldent open my audio note so i thought if i delet it and transfer the application from itunse from my pc i can have my files...but all of them deleted from both application and also from wifi address... I

Hi , unfortunately i faced with a problem that i couldent open my audio note so i thought if i delet it and transfer the application from itunse from my pc i can have my files...but all of them deleted from both application and also from wifi address... Is it any solution for recovery the filew? I missed lots of important files , plz help me
Tnx alot

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Access mirror site using java, download files and other information?

Hi, I have 2 nodes/servers on the system both running webservers and having the same interface, but at a time user will access one node at a time from their browser, but this interface will be able to allow the user to get information from the both the nodes. the information that the user can get is DB stored as well as files on the disk of either node.
i can manage the DB, cuz there is nothing to it, but how do I get files from the other node?
currently any files/web documents are all stored in a application directory of the web root and protected by htaccess i believe, so when a user logs on to node one he can access all plain text/binary files along with web content since the web server authorizes the user to access anything in that dir. but at the same time from the same session I want to be able to access files in a mirror site using the same username and password and not having him to enter it again. the username/pass combo is replicated on both the servers, it this possible?
currently i use the http password protection provided by apache to access one node, but can i use the same session on another machine with the same credentials?
If this is not possible how can i do this programatically using java? can i do can "ls" on the directory i want on another server and display the list to the user and then when he clicks on that file name i fetch it from the backup/mirror server and have him save it using http or ftp?
It would be great if we can get a solution to this.
Thank you very much in advance.
Ankur

If you install the web server on different machines, It is possible to share the informations between them.

My iPhone will not send an iMessage. It sends everything as SMS. I have ensured that my Apple ID is signed in and that my phone number is enabled for use in both FaceTime and iMessage

My iPhone will not send an iMessage. It sends everything as SMS. I have ensured that my Apple ID is signed in and that my phone number is enabled for use in both FaceTime and iMessage

I had the same problem. I went in and added my email address to iMessage and deleted the text to my friends that have iPhones and sent another to test it and it worked. Only thing is now my non iPhone friends don't receive my pic text. I had to turn off iMessage for it to work. Apple needs to fix this ASAP!

I am using Dreamweaver cc 2014 and after applying css styles to my fluid grid layout I lose the resize, delete, duplicate and move up/ down ability.

I am using Dreamweaver cc 2014 and after applying css styles to my fluid grid layout I lose the resize,delete, duplicate an move up/ down ability.
For this reason I cannot build new pages by copying one page to create another.
I have a third style sheet that I use for the navigation styles and h1 -h6 ect. tags. and I am also using a css drop menu, can one of these be the problem?
The css menu I am using has the following script - I goes at the bottom of the html page. Before the closing body tag,
<script>
$(function () {
$("#nav").tinyNav();
</script>
I am also using the following for image control - I place it towards the top of the fluid
grid style sheet.
    box-sizing: border-box; /* Opera/IE 8+ */
    -moz-box-sizing: border-box; /* Firefox, other Gecko */
    -webkit-box-sizing: border-box; /* Safari/Chrome, other WebKit */
Can some one please help.

I am using Dreamweaver cc 2014 and after applying css styles to my fluid grid layout I lose the resize,delete, duplicate an move up/ down ability.
This implies there is something broken in your FluidGrid Layout CSS file.   It could be something simple like a missing semi-colon or curly bracket.   Run your code through the W3C validation tools below to check for errors. NOTE: ignore reported errors in boilerplate.css
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

Can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?

can i use exfat format for my external western digital harddrive so that i can use in both windows and mac?
thanks in advance.
<Email Edited by Host>

Yes you can. OS X version 10.6.6 and later can read/write exFAT. Windows XP SP3 and later can read/write exFAT. As posted by Radiation Mac, you can do it from Windows or from OS X.
However, I've noticed Windows to be somewhat picky about drives formatted on a Mac. So, if Windows can't read it, try formatting it on the Windows machine, and see how it works on the Mac.
Posting your email on a public forum isn't a very good idea. It will likely be harvested by spambots and used as the reply-to address for spam it sends out.
Also, most people are not going to send an email to you for similar reasons. Nobody knows who you are, so sending an email to you could be giving a spammer a valid email address.
The forum is set up to automatically notify you when there are responses to your questions. When you get one, you would log back into this forum and check to see what the answer was.

I recently reset my computer to factory settings. I re-downloaded iTunes, but lost most of my music and all of my playlists in both iTunes and my 4S. How can I get this back?

I recently reset my computer to factory settings. I re-downloaded iTunes, but lost most of my music and all of my playlists in both iTunes and my 4S. How can I get this back?

Restore your media from the backup of the computer created prior to restoring the computer.
You did create a backup, correct? Not doing so would be extremely unintelligent.
iOS devices are NOT backup devices.

External hard drive format for use in both OS9 and OSX

I have never use OS9. A friend of mine wants to transfer their files from an OS9 computer to an OSX computer. Is there a hard drive format that can be used on both OS9 and OSX. It would be great to be able to transfer the files over on my Firewire hard drive.
Many thanks,
Beaglebrain.

Beaglebrain,
Should have added that you should check the size of your HD. OS9 won't recognise anything beyond about 190GB.
Michael

Can I include both CSS and HTML codes in one Open HTML Editor.

Somehow Cell phones are not properly reading css codes. Is there any way to include both CSS and HTML codes in one Open HTML Editor?

Hammad, their code is fairly mobile friendly. Per my other discussion with you ( http://topliners.eloqua.com/thread/8532 ), Eloqua's code is responsive for the most part. Most of their issues lie with the styling of the email where you will get different fonts and different sized fonts throughout the email and some other minor display issues.
What you are trying to accomplish is extremely difficult to do because you do not have the access to the HTML to better control how the responsive template works which is why the Eloqua templates (and most ESP templates) stick to the more basic side of emails.
If you want to use Eloqua's WYSIWYG to make their responsive email you can do so, but I would recommend deleting all their body text before editing anything because of the inconsistencies in their code. Otherwise, I think you would be better off coding the emails outside of Eloqua using a 3rd party editor whether it's something more robust like Dreamweaver or Coda, or whether you feel comfortable working in a more text environment with programs like Notepad++ or Brackets.
At the end of the day remember you are paying Eloqua for these and if you choose to stick with the WYSIWYG and you are not getting the results you expect you need to tell Eloqua through your support channels.

Publishing a Unique Site Using Dreamweaver CS6 and Business Catalyst

What are the steps to publishing a unique site using Business Catalyst with Dreamweaver? By "unique site" I mean not using Business Catalyst templates, but rather my own original site design and directory. Also, does Business Catalyst support flash based sites? I tried to start a new BC site using one of my flash based sites and it wouldn't show up in the preview, but rather resorted to using a layout of one of the BC templates. I can't find any information on how this all works as a Creative Cloud subscriber. For example, you provide "learn more" links from the website seciton on the CreativeCloud default subsriber's page, but when I click on that there is no relative information other than some videos about Muse and Dreamweaver, but nothing on how I can use either of those apps as integrated with publishing sites on Business Catalyst. There is a BC help page: http://helpx.adobe.com/business-catalyst.html?promoid=IMJLB but this is in context of being a BC member, not a Creative Cloud subsriber so all of the information doesn't relate, especially if someone want to publish a unique site using Creative Cloud.

Hi JSokki,
These might be helpful for you
http://www.adobe.com/devnet/businesscatalyst/articles/build_first_bc_w ebsite.html
http://www.businesscatalyst.com/support/customers.html
I'm moving this thread to our Business Catalyst forum.
-Dave

IPod 5G: Disk use on both Macs and PCs.

Greetings,
I have an iMac and iPod. I have selected option "Enable Disk Use" in iTunes.
When using iPod as a external disk on my iMac,all works ok.
Problem is when I plug my iPod into a PC. The PC shows an error message: "The disk in drive F is not formated. Do you want to format it now?". Is this how is supposed to be? How can I use iPod as an external disk when PC doesn't recognize it? Can someone explain this? I know that there are different formating for Macs and PCs, but since I am connecting via USB, it should not be a problem. I am connecting my memory card reader/writer (via USB) to both PCs and Mac and it works. The same is with my digital camera, works on both platforms. And what is even more strange, when I restore iPod on PC and sync in iTunes on PC, with enabling disk use, I can use it on both platforms.
Thank you in advance for replies,
JK

It is because your iPod is formatted in Mac format which Window machines can not read (regardless if you are using USB or not; it does matter).
If you reformatted the iPod for Windows, then you can use it on both systems since Macs can read Windows formatted iPod just fine.
Patrick

Component material to be used for both MTO and MTS scenario

Hello All,
What is the setting required at IMG or at Master data level, in order to use the component for both MTO and MTS scenario.
Detail description of problem:
In the system already MTS process is exist. And now business wants MTO scenario, in order to have sales order specific stock.
So i have made the necessary configuration in requirement class (special stock - E in account assignment field) and the basic requirement is working fine. Meaning when i create prodcution order manually using transaction CO08 with reference to sales order i am able to create it. And no problem in executing GR for the prodcution order. Also noticed that after GR the stock is under the salesorder created.
But the problem is when i try to do the goods issue for the component to the prodcution order, system is expecting sales order specific stock for components too.
But business wants to use components from unrestricted stock as of Make to stock scenario.
Please guide me how to achieve this? This is critical to business so expecing quick recommendations from experts.
Best Regards,
Krish

HI
For your component if you dont set indi/collective requirement indicator as 2 collective reqmt MRP 4 view then only system will not allow you to use r special stock E for sales order
if you want to make all stock avaliable and PR and PO not sales order wise then maintain above indicator as 2 in MRP4 view.
Regards
Anupam Sharma

Problems previewing all my sites using Dreamweaver 8 both CF and html.

Similar Messages

Maybe you are looking for