Problems Setting up triple Display

Hi Folks, after some help
Recently tried setting up a triple display set up on Mac pro with ATI Radeon HD 5770 from the single display previously used.
I have 2 new Samsung B1930 monitors connected through Mini Display Port to VGA apple connectors in the 2 Slots and my old Samsung B2430 connected up through the DVI.
What i hoped to achieve is
Left B1930 extended desktop                                
Middle: B2430 Main screen with Dock etc
Right B1930 Extended Screen
What i have is the left B1930 as the main screen (inc Dock) and the Middle B2430 and righ B1930 as the extension.  Is it only possible to extend one way? or is there a way to extend left and right.
Cheers in advance

Ignore, completely thick user! Put your glasses on and Drag the white bar.  Does blaming a small 19" monitor help

Similar Messages

  • Problems setting up email account

    Have recently got a blackberry 9300 and having problems setting up my aol email account. 
    Do not know how to fix this problem, can anyone please give advice?

    Hi and Welcome to the Forums!
    Well, a bit more detail than "having problems" might help us just a bit...keep us from guessing, after all. In the meantime, see this:
    http://us.blackberry.com/support/blackberry101/set​up.jsp#tab_tab_email
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • T420 - Triple display not working

    So, according to this page: http://www-307.ibm.com/pc/support/site.wss/MIGR-76617.html , the T420 I have is supposed to support two external displays as well as the laptop display as follows:
    ThinkPad-only Triple Display Configuration:
    1st Display: Active ThinkPad display
    2nd Display: VGA analog monitor attached to the ThinkPad VGA analog port.
    3rd Display: DisplayPort monitor attached to the ThinkPad DisplayPort
    However, when I connect both external displays, it will switch off one of the external monitors (the first one connected).
    Using display port to HDMI cable for monitor 1, VGA for monitor 2.  Both are verified working as external monitors with the T420, just not at the same time.
    I've looked through the BIOS and display properties to no avail.
    Is this actually possible without a docking station?
    -B

    Only a laptop with a discrete NVIDIA graphics card, will support those configurations. If you just have the onboard Intel graphics, then I bet you'll only be able to drive two without a dock. With a dock, you still may be able to drive three monitors (including the ThinkPad's LCD).
    BTW, I found even with an NVIDIA discrete graphics option, that page you refer to is incorrect (else I have a problem with my docking station). It says you can drive three monitors with "Any combination of the following" when after much trial and error, I determiend one has to be a VGA analog connection. 

  • Problem with lenovo T530 display

    I have recently bought lenovo T530, it had win7 pre-installed. and win8 upgrade disks available. I have immediatly upgraded to windows 8 then win8.1.
    the problem is that the display is showing yello color instead of white, the yello keep flickering and although I have upgraded the drivers I still see the white colors as having spots of yello.
    please help.

    Okay here it goes...
    1.  First you need to save the T/W icc profile from this link: My custom profile
    2.  Right Click your Desktop and select "Screen Resolution"
    3.  Click "Advanced Settings"
    4.  Select "Color Management" Tab
    5.  Click "Color Management" button
    This is where it can get a little confusing but I will try to make it clear.
    6.  Now that you are at the "Color Management" window, go to the "Advanced" Tab
    7.  Click the "Change system defaults..." button
    Another "Color Management" window will open that looks just like the window you were in before, the only difference is that this one is called "Color Management - System Defaults"
    8.  Now go to the "Advanced" Tab in this new Window.
    9.  Next to the "Calibrate display" button there is a little square tick box which says "Use Windows display calibration", normally this does not have a tick in the box. Please tick this box and then press "Close"
    You will now be back at the "Color Management" window, not the "Color Management - System Defaults" window.
    10.  In the "Color Management" window go to the "Devices" Tab
    11.  Place a tick next to the "Use my settings for this device" box.
    12.  Below go and press the "Add" button.
    13.  Browse to where you saved the .icc or .icm profile you want to apply and select it.
    14.  Now select your profile and press the "Set as Default Profile" button
    If all has been done correctly you should notice a big difference on how colors are displayed. It should be for the better.  If you want to toggle between having your profile ON and OFF, just tick or untick the "Use my settings for this device" box.
    If you've been used to using your display with poorly calibrated colors, the new profile may come as a bit of a shock to your eyes but the colors should now be much closer to being correct than the default factory profile which is not even calibrated for the display.  For example, if you are using the Windows 7 theme, you will immediately notice that the greys around boxes are grey now, not a light bluish grey.
    Cheers
    W530 | 3840QM | 32g @ 1.35v CL9 1986z | 512g 840 Pro | 1t HGST 7200 | FHD AUO v.4 | Quadro K2k | GOBI 5k | Centrino 6300

  • Having problems setting text to a JLabel!!

    HI *.*,
    i'm having problems setting text to a JLabel.
    i have a JFrame with a JPanels and on the JPanel i have a JLabel.
    I have a text field wihich is used to input text.
    So, i'm using textField.getText() to read the text of the text field and setText() to write it to the Label.
    but setText() isn't displaying the text on the label.
    I'm using NetBeans as an ide
    Does anyone have any ideas??

    Here is some code
    public class AddClass extends JFrame implements ActionListener{
        public AddClass() {
            initComponents();
        }//end of 1st constructor with initComp
        //initComponents
        private void initComponents() {
            getContentPane().setLayout(new java.awt.GridLayout(3, 1));
            setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
            prodPanel.setLayout(new java.awt.GridLayout(1, 3));
            prodPanel.setBackground(new java.awt.Color(255, 255, 255));
            prodPanel.setBorder(javax.swing.BorderFactory.createTitledBorder(javax.swing.BorderFactory.createEtchedBorder(), "Production", javax.swing.border.TitledBorder.DEFAULT_JUSTIFICATION, javax.swing.border.TitledBorder.DEFAULT_POSITION, new java.awt.Font("Arial", 1, 12)));
            westPanel.setLayout(new java.awt.GridLayout(6, 0));
            westPanel.setBackground(new java.awt.Color(255, 255, 255));
            westPanel.add(westLab1);
            westLab2.setBackground(new java.awt.Color(255, 255, 255));
            westLab2.setFont(new java.awt.Font("Arial", 1, 36));
            westLab2.setForeground(new java.awt.Color(0, 204, 0));
            westLab2.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
            westLab2.setIcon(new javax.swing.ImageIcon("C:\\icontexto-webdev-bullet-048x048.png"));
            westLab2.setText("MQ 35");
            westLab2.setHorizontalTextPosition(javax.swing.SwingConstants.LEFT);
            westLab2.setIconTextGap(10);
            westLab2.setInheritsPopupMenu(false);
            westPanel.add(westLab2);
            westPanel.add(westLab3);
            westPanel.add(westLab4);
            westPanel.add(westLab5);
            prodPanel.add(westPanel);
            setJMenuBar(menuBar);
            setTitle("Broker Monitor");
            this.setSize(700, 700);
            BrokerWindowCloser brkWindowCloser = new BrokerWindowCloser();
            this.addWindowListener(brkWindowCloser);
            pack();
            //       setVisible(true);
        }//end of initComponents
        public AddClass(String st) {
            initComponents();
            westLab6.setVisible(true);
    //        System.out.println("in broker  " + st); 
            westLab6.setText(st);
            System.out.println(st);
            westLab6.setBackground(new java.awt.Color(255, 255, 255));
            westLab6.setFont(new java.awt.Font("Arial", 1, 36));
            westLab6.setForeground(new java.awt.Color(0, 204, 0));
            westLab6.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
            westLab6.setIcon(new javax.swing.ImageIcon("C:\\PNG\\icontexto-webdev-bullet-048x048.png"));
            westLab6.setEnabled(true);
            westLab6.setHorizontalTextPosition(javax.swing.SwingConstants.LEFT);
            westLab6.setIconTextGap(15);
            westLab6.setInheritsPopupMenu(false);
            westPanel.add(westLab6);
    //       this.validate();
            westPanel.repaint();
        public void actionPerformed(ActionEvent ae) {
            Object source = ae.getSource();
            if(source == exitMI) {
                System.exit(0);
            }//end of if exitMI
            if(source == addMI){
                new AddMQ_1_1();
            if(source == removeMI){
                new RemoveMQ_1();
        }//end of actionPerformed
        class BrokerWindowCloser extends WindowAdapter {
            public void windowClosing(WindowEvent we) {
        }//end of windowcloserclass
        public static void main(String args[]) {
            java.awt.EventQueue.invokeLater(new Runnable() {
                public void run() {
                    new AddClass().setVisible(true);
        }//end of main
    }// End of variables declaration
       public void addButtonActionPerformed(java.awt.event.ActionEvent evt) {
    // TODO add your handling code here:
            Object source = evt.getSource();
            if(source == addButton){
                System.out.println("here");
                String st = mqNameJTF.getText();
                Broker1 br = new Broker1(st);
                AddClass adc = new AddClass(st);
                this.repaint();
    this.dispose();
            }//end of if addButton
        }//end addButtonActionPerformed

  • HT204023 I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me

    I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me. Before I was using this service but now facing problem.

    Md Asad wrote:
    Yes but they told mobile co mean Device 'iPhone co'
    Sorry but that makes no sense in English. Only your mobile phone company (i.e. "carrier") can enable the Personal Hotspot feature.

  • What should I do to set up the display profile?

    I installed the portal server 7 and I am trying to create a new desktop for a new org I created in the access manager.
    I tried to use the portal server console to download the toplevel's dp and modified it and upload for the new org..but failed to set up the desktop for the new org... each time I try to download the top level's dp, it gave me a diff name though the contents are the same.
    I am new to display profile and i can't find the details about how to set up the display profile for the new desktop, can anyone give me some instructions on how to do it?
    these are the procedures I did for the new org:
    1.create a new org in access manager
    2.create a user in the org
    3.in portal server console, add the new channels and containers to the org. i added a login provider
    4. add an anonymous for the org in the toplevel
    5. download the toplevel's profile by typing *.dp in the download display profile page (<------is this correct?) it gave me a file named "CAJM0ZV5"
    6. upload this "CAJM0ZV5" as the dp for the new org in the portal server console.
    7. try to access the portal desktop using the anonymous usr
    8. error msg :
    "A serious error has occured in the Desktop. This may have been caused by a mis-configuration on the server.
    Please report this problem to your administrator.
    Possible cause:
    You do not have permission to access the desktop"
    anyone can give me some help? thanks a lot ..

    According the message, it seems the users don't have access to the desktop. They must have the "Portal Desktop" service. This is done in the Access Manager Console.
    To create a desktop for an organisation, you can do it directly in the PS console by creating new containers and channels without downloading and uploading DP :
    go to the PSConsole then choose your portal. In the desktop tab select your organization (select DN), then "Manage Containers and channels...

  • Problem with repaint of display after a click event

    Hi,
    I have a problem with repaint of display. In particular in method keyPressed() i inserted a statement that, after i clicked bottom 2 of phone, must draw a string. But this string doesn't drawing.
    Instead if i reduce to icon the window, which emulate my application, and then i enlarge it, i see display repainted with the string.
    I don't know why.
    Any suggestions?
    Please help me.

    modified your code little
    don't draw in keyPressed
    import java.io.IOException;
    import javax.microedition.lcdui.Canvas;
    import javax.microedition.lcdui.Command;
    import javax.microedition.lcdui.CommandListener;
    import javax.microedition.lcdui.Display;
    import javax.microedition.lcdui.Displayable;
    import javax.microedition.lcdui.Graphics;
    import javax.microedition.lcdui.Image;
    public class PlayerCanvas extends Canvas implements CommandListener{
         Display display;
         Displayable dsp11;
    private Image play, pause, stop, next, previous = null;
    private int gamcode;
    private Command quitCmd = new Command("Back", Command.ITEM, 1);
    public PlayerCanvas(Display display,Displayable dsp11){
         this.display =display;
         this.dsp11 =dsp11;
         addCommand(quitCmd);
         createController();
         setCommandListener(this);
         display.setCurrent(this);
              protected void paint(Graphics g)
              g.setColor(255,200,150);
              g.fillRect(0, 0, getWidth(), getHeight());
              if (play != null){
              g.drawImage(play, getWidth()/5, getHeight()-50, Graphics.BOTTOM | Graphics.HCENTER);
              if (stop != null){
              g.drawImage(stop, getWidth()/5, getHeight()-10, Graphics.BOTTOM | Graphics.HCENTER);
              if (next != null){
              g.drawImage(next, (getWidth()/5)+10, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
              if (previous != null){
              g.drawImage(previous, (getWidth()/5)-30, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
                   /////this will draw on key UP
                   g.setColor(0,0,0);
                   System.out.print(gamcode);
                   if(gamcode==Canvas.UP){
                        g.drawString("PROVA",10, 0, 0);
                   }else if(gamcode==Canvas.DOWN){
                        g.drawString("DIFFERENT",10, 30, 0);     
    private void createController()
    try {
    play = Image.createImage("/icon3.png");//replace your original images plz
    pause = Image.createImage("/icon3.png");
    stop = Image.createImage("/icon3.png");
    next = Image.createImage("/icon3.png");
    previous = Image.createImage("/icon3.png");
    } catch (IOException e) {
    play = null;
    pause = null;
    stop = null;
    next = null;
    previous = null;
    if (play == null){
    System.out.println("cannot load play.png");
    if (pause == null){
    System.out.println("cannot load pause.png");
    if (stop == null){
    System.out.println("cannot load stop.png");
    if (next == null){
    System.out.println("cannot load next.png");
    if (previous == null){
    System.out.println("cannot load previous.png");
              protected void keyPressed(int keyCode)
                   repaint();
                   if ( (keyCode == 2) || (UP == getGameAction(keyCode)) ){
                        gamcode = UP;
                        repaint();
                        else if ( (keyCode == 8) || (DOWN == getGameAction(keyCode)) ){
                             gamcode =DOWN;
                             repaint();
              else if ( (keyCode == 4) || (LEFT == getGameAction(keyCode)) ){
              else if ( (keyCode == 6) || (RIGHT == getGameAction(keyCode)) ){
              public void commandAction(Command arg0, Displayable arg1) {
                   // TODO Auto-generated method stub
                   if(arg0==quitCmd){
                        display.setCurrent(dsp11);
    }

  • How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side.  E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

  • Problems setting up username & password for SQL

    Due to the outstanding advice I recieved from this excellent forum, I have managed to overcome my first problem with declaring a new Class.
    This leads me to request help with my next biggest problem:
    Setting up a user GUI that takes a "username" & "password" that will be used to access a password protected database.
    I am a simple bloke, with simple thought processes, so please, go easy on me...
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.sql.*;
    public class DBQuery1 {
         String username = "" , password = "";
         public static void main(String[] arguments) {
              PassDB UPass = new PassDB();
              String data = "jdbc:odbc:JavaTestDataBase";
              try {
                   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                   Connection conn = DriverManager.getConnection(data, "" + username, "" + password);
                   Statement st = conn.createStatement();
                   ResultSet rec = st.executeQuery(
                        "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
                        + "WHERE (Title='Mr') ORDER BY ContactID");
              /*     ResultSet rec2 = st.executeQuery(
                        "SELECT Subject, ContactID FROM Calls "
                        + "WHERE (Subject Is Not Null) ORDER BY ContactID");
              System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
              while(rec.next()) {
                   System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
              st.close();
              catch (SQLException s) {
                   System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
              catch (Exception e) {
                   System.out.println("Error: " + e.toString() + e.getMessage());
    class PassDB extends javax.swing.JFrame implements ActionListener {
         String username = "", password = "";
         JTextField uname = new JTextField(10);
         JTextField pword = new JTextField(10);
         // JPasswordField pword = new JTextField(10);
         PassDB() {
              super("duBe's database logon");
              setSize(220, 160);
              setDefaultCloseOperation(EXIT_ON_CLOSE);
              JPanel pane = new JPanel();
              JLabel unameLabel = new JLabel ("Username: ");
              JLabel pwordLabel = new JLabel ("Password: ");
              JButton submit = new JButton("OK");
              submit.addActionListener(this);
              pane.add(unameLabel);
              pane.add(uname);
              pane.add(pwordLabel);
              pane.add(pword);
              pane.add(submit);
              setContentPane(pane);
              setVisible(true);
         public void actionPerformed(ActionEvent evt) {
              PassDB clicked = (PassDB)evt.getSource();
              username = uname.getText();
              password = pword.getText();
    This code generates two errors, stating:
    C:\Java_progs>javac DBQuery1.java
    DBQuery1.java:14: non-static variable username cannot be referenced from a static context
    Connection conn = DriverManager.getConnection(data, "" +
    username, "" + password);
    ^
    DBQuery1.java:14: non-static variable password cannot be referenced from a static context
    Connection conn = DriverManager.getConnection(data, "" +
    username, "" + password);
                    ^
    2 errors*****************************
    The code works when I remove the reference to the variables "username" & "password" in Connection "conn" call & replace them with the actual username & password, but this is not exactly what I was after. I was hoping to make the program responsive to each individual user, not set in code.
    I also would like to make the program pause after the call in "main" to "PassDB" to wait for "PassDB" to exit before continuing.
    I would also like to make "PassDB" destroy itself after the "OK" button is pressed & the "username" & "password" set.
    If that isn't enough for you, I would really like the program to search 2 different database tables, return their values & compare them to be sure that they are the same.
    When I try & search 2 different tables, as in:
    ResultSet rec = st.executeQuery(
                        "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
                        + "WHERE (Title='Mr') ORDER BY ContactID");
                   ResultSet rec2 = st.executeQuery(
                        "SELECT Subject, ContactID FROM Calls "
                        + "WHERE (Subject Is Not Null) ORDER BY ContactID")javac tells me that "ResultSet" is set to null 0
    As always, I am extremely appreciative of any assistance you are able to offer.
    Kind regards
    duBedat
    [email protected]

    This is where I'm at now:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.sql.*;
    public class DBQuery {
         static String username = "" ;
         static String password = "" ;
         public static void main(String[] arguments) {
         PassDB UPass = new PassDB();
         String data = "jdbc:odbc:JavaTestDataBase";
         try {
              Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
              Connection conn = DriverManager.getConnection(data, "" + DBQuery.username, "" + DBQuery.password);
              Statement st = conn.createStatement();
              ResultSet rec = st.executeQuery(
              "SELECT Title, ContactID, First, Last, Dear FROM Contacts "
              + "WHERE (Title='Mr') ORDER BY ContactID");
              /*     ResultSet rec2 = st.executeQuery(
                   "SELECT Subject, ContactID FROM Calls "
                   + "WHERE (Subject Is Not Null) ORDER BY ContactID");
              System.out.println("\nFirst Name\tSurname\t\tNick Name\t\tSubject\n");
              while(rec.next()) {
                   System.out.println(rec.getString(3) + "\t\t" + rec.getString(4) + "\t\t" + rec.getString(5) /* + rec2.getString(1) */ );
              st.close();
         catch (SQLException s) {
              System.out.println("SQL Error: " + s.toString() + " " + s.getErrorCode() + " " + s.getSQLState());
         catch (Exception e) {
              System.out.println("Error: " + e.toString() + e.getMessage());
    class PassDB extends javax.swing.JFrame implements ActionListener {
         static boolean getOut = false;
         JTextField uname = new JTextField(10);
         JTextField pword = new JTextField(10);
         // JPasswordField pword = new JTextField(10);
         public PassDB() {
              super("duBe's database logon");
              setSize(220, 160);
              setDefaultCloseOperation(EXIT_ON_CLOSE);
              JPanel pane = new JPanel();          
              JLabel unameLabel = new JLabel ("Username: ");
              JLabel pwordLabel = new JLabel ("Password: ");
              JButton submit = new JButton("OK");
              submit.addActionListener(this);
              pane.add(unameLabel);
              pane.add(uname);
              pane.add(pwordLabel);
              pane.add(pword);
              pane.add(submit);
              setContentPane(pane);
              while(getOut == false)
                   setVisible(true);                         
         public void actionPerformed(ActionEvent evt) {
              PassDB clicked = (PassDB)evt.getSource();
              DBQuery.username = uname.getText();
              DBQuery.password = pword.getText();
              getOut = true;               
    }          Any advice is greatly appreciated
    duBe

  • Problems setting up an NFS server

    Hi everybody,
    I just completed my first arch install. :-)
    I have a desktop and a laptop, and I installed Arch on the desktop (the laptop runs Ubuntu 9.10). I had a few difficulties here and there, but I now have the system up and running, and I'm very happy.
    I have a problem setting up an NFS server. With Ubuntu everything was working, so I'm assuming that the Ubuntu machine (client) is set-up correctly. I'm trying to troubleshoot the arch box (server) now.
    I followed this wiki article: http://wiki.archlinux.org/index.php/Nfs
    Now, I have these problems:
    - when I start the daemons, I get:
    [root@myhost ~]# /etc/rc.d/rpcbind start
    :: Starting rpcbind [FAIL]
    [root@myhost ~]# /etc/rc.d/nfs-common start
    :: Starting rpc.statd daemon [FAIL]
    [root@myhost ~]# /etc/rc.d/nfs-server start
    :: Mounting nfsd filesystem [DONE]
    :: Exporting all directories [BUSY] exportfs: /etc/exports [3]: Neither 'subtree_check' or 'no_subtree_check' specified for export "192.168.1.1/24:/home".
    Assuming default behaviour ('no_subtree_check').
    NOTE: this default has changed since nfs-utils version 1.0.x
    [DONE]
    :: Starting rpc.nfsd daemon [FAIL]
    - If I mount the share on the client with "sudo mount 192.168.1.20:/home /media/desktop", IT IS mounted but I can't browse it because I have no privileges to access the home directory for the user.
    my /etc/exports looks like this:
    # /etc/exports: the access control list for filesystems which may be exported
    # to NFS clients. See exports(5).
    /home 192.168.1.1/24(rw,sync,all_squash,anonuid=99,anongid=99))
    /etc/conf.d/nfs-common.conf:
    # Parameters to be passed to nfs-common (nfs clients & server) init script.
    # If you do not set values for the NEED_ options, they will be attempted
    # autodetected; this should be sufficient for most people. Valid alternatives
    # for the NEED_ options are "yes" and "no".
    # Do you want to start the statd daemon? It is not needed for NFSv4.
    NEED_STATD=
    # Options to pass to rpc.statd.
    # See rpc.statd(8) for more details.
    # N.B. statd normally runs on both client and server, and run-time
    # options should be specified accordingly. Specifically, the Arch
    # NFS init scripts require the --no-notify flag on the server,
    # but not on the client e.g.
    # STATD_OPTS="--no-notify -p 32765 -o 32766" -> server
    # STATD_OPTS="-p 32765 -o 32766" -> client
    STATD_OPTS="--no-notify"
    # Options to pass to sm-notify
    # e.g. SMNOTIFY_OPTS="-p 32764"
    SMNOTIFY_OPTS=""
    # Do you want to start the idmapd daemon? It is only needed for NFSv4.
    NEED_IDMAPD=
    # Options to pass to rpc.idmapd.
    # See rpc.idmapd(8) for more details.
    IDMAPD_OPTS=
    # Do you want to start the gssd daemon? It is required for Kerberos mounts.
    NEED_GSSD=
    # Options to pass to rpc.gssd.
    # See rpc.gssd(8) for more details.
    GSSD_OPTS=
    # Where to mount rpc_pipefs filesystem; the default is "/var/lib/nfs/rpc_pipefs".
    PIPEFS_MOUNTPOINT=
    # Options used to mount rpc_pipefs filesystem; the default is "defaults".
    PIPEFS_MOUNTOPTS=
    /etc/hosts.allow:
    nfsd: 192.168.1.0/255.255.255.0
    rpcbind: 192.168.1.0/255.255.255.0
    mountd: 192.168.1.0/255.255.255.0
    Any help would be very appreciated!

    Thanks, I finally got it working.
    I realized that even though both machines had the same group, my Ubuntu machine (client) group has GID 1000, while the Arch one has GID 1001. I created a group that has GID 1001 on the client, and now everything is working.
    I'm wondering why my Arch username and group both have 1001 rather than 1000 (which I suppose would be the default number for the first user created).
    Anyway, thanks again for your inputs.

  • Problems setting up static routing

    HI
    I'm having a problem setting up static routing.  I keep getting the message "invalid static route".   I have an E1550 router and my frimware is up to date.  I have tried a few different gateway addresses ie 192.168.1.1,  127.0.0.1 and my router's address on the net, but I keep getting the same message.  Has anyone else had this problem and been able to fix it?

    I think the E1550 router supports LAN to LAN routing provided that you have two local networks. If you only have a plain modem and the E1550, I believe you can't do Static routing on that type of setup. Found this link that might help: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=12a84336a124498eb5d6f0204b85191e_17589.xml&pid=80&...

  • Problems Setting Up Developer Users

    I am having a problem setting up developer users and I am trying to determine if I am missing a step or if there is a configuration problem on my staging and production systems.
    What I want to do should be very simple. I want to create a user that can create an application and see the information under the "Application" tab in the Navigator.
    I have created the user using the following steps on 3.0.9.82 for Unix:
    1. Create the user
    2. Make the user a full administrator (rather than end user)
    3. Make the user a member of the portal_developers group
    4. Make the user's default group the portal_developers group
    However, when I do this the user does not see the information under the
    "Application" tab. The only way I can get the user to see the info under the
    "Application" tab is to make him a member of the Portal_administrators
    and/or DBA group. Both my staging and production boxes have the same result.
    Does anyone have any thoughts or suggestions on what might be happening?

    Thank you- I have read through that thread and can see some resonance with my issue.
    My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
    This issue only raised its ugly head when I had 2 Torches replaced by my insurers. 
    Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies)  All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc. 
    Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
    SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
    Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches.  This has used up ridiculous amounts of time- all wasted.
    I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
    Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)  
    Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again.  How nuts is that?
    Many thanks for all help & suggestions..........boy do I need them!!
    Kind wishes from West of Scotland 
    Fair winds and kind landfalls

  • Problems setting up VVSA 6.0 (lookup service adresse)

    Hi,
    I was happy to see VVSA 6.0 released, but i'm having problems setting it up. It keeps saying that the lookup service adresse is not reachable. But I have tried with the VVSA 5.5 and 5.5.1.1 and they work just fine with the lookup service adresse.
    Anyone else having this issue?
    Also trying to check for updates within the appliance failes since the repository is not online at vmware it seems.
    Might not be ready for primetime (like ESXi6).

    If Developer has a separate Oracle Home on your PC, then it has a separate TNSNAMES.ORA file that is uses to connect to the database. If you search for all tnsnames.ora files, you should find the one used by Developer 6.
    Since Enterprise manager works, the tnsnames.ora in your Enterprise Manager's home will have an entry for your server database. You should be able to cut and paste this into the tnsnames.ora file used by Developer, or try copying the E.M. tnsnames.ora file directly.
    John Alexander www.SummitSoftwareDesign.com

  • Problems setting up JDBC

    I recently downloaded mysql Connector for my project.
    However, I have problems setting it up.
    When I run my program, It gives me a class not defined error.
    System.out.println("Registering Driver...");
                   Class.forName("com.mysql.jdbc.Driver").newInstance();
    System.out.println("Connected to database");
    System.out.println("Creating Connection");
    connection= DriverManager.getConnection("jdbc:mysql://localhost:8080/neuis");
    System.out.println("Connection created");
    catch(Exception ex)
    System.out.println("Error in loading jdbc Driver: "+ex);
    ex.printStackTrace();
    I have put the jar file of the JDBC Bridge in a folder
    C:\Drivers\Sql Connector
    I have also added the absolute path of the jar to the system classpath
    The value put in is:
    C:\Drivers\Sql Connector\mysql-connector-java-3.1.10-bin.jar.
    I am not sure what the problem is because I was told by the API that this was all I needed to do. Are there any other files I need to include with the jar file? Also, Is there a specific folder I must put it in?
    Thank you in advance.

    Hi,
    Take a look at the below link
    http://www.cs.nott.ac.uk/TSG/manuals/databases/mysql/jdbc.html
    may help you to setting up the jdbc with mysql
    regards
    MJ

Maybe you are looking for

  • Make payment terms in sales order editable after billing

    Hi, i checked orders in two different systems. In one system payment term is editable even after completely billing the sales order. In other system the payment term field in sales order is grayed out after complete billing and it is not editable. No

  • Regarding Firefox 4 does not ask to save tabs and windows on exit even after trying all suggestions

    After installing Firefox 4, Firefox would no longer ask to save tabs and windows on exit. Even after trying all suggestions to resolve the problem, the problem continued. Under the corrupted files suggestion to rename two files, that also did not hel

  • Insert chinese characters to mysql

    I have searched the forum and found a useful links --http://forum.java.sun.com/thread.jspa?threadID=530358 about inserting chinese characters to mysql. However, I can't see the chinese characters displayed in the db. The charset and collation of my t

  • Non-Corporate Verizon Stores shouldn't exist...

    Background: I have had Verizon since 2010. I upgraded to an iPhone 4 in February of 2012 at my local "Verizon" store no problem. I am the type of customer that gets a phone on a two year contract and keeps it to avoid extra charges because, frankly,

  • Error in installing repserver

    that's my first time here and i hope i find good suport i have a problem with my system i have oracle database 9 i and developer 10G and my OS is windows XP SP2 i try to intall the repserver by writen this in the commebnd rwserver -install repserver1