Problems to hear music with Quictime on XP

Hi
I have always problems to hear something with quicktime: it plays it like a robot speak, very jerky.
I use windows xp.
Thanks!

I am also having the same problem
HELP! I am trying to fix a problem with my QUICKTIME and ITUNES! When I play anything in Quicktime or through ITUNES - the sound is "wobbly." It sounds like a person is underwater - with the sound breaking making it inteligible. Any ideas? What could be causing this? What conflict? Is it a codec problem? - Stefan ([email protected])

Similar Messages

If i hear Music with my EarPods and i HAVE an Apple watch Sport CAN i Control the Music on MY watch ?

If i hear Music with my EarPods and i HAVE an Apple watch Sport CAN i Control the Music on MY watch ?

Hi witt20,
I apologize, I'm a bit unclear on the exact configuration you are describing. If you are using your EarPods with your iPhone, you can control your music on your iPhone with the built-in Music app on your Apple Watch, as noted here:
Apple - Apple Watch - Built-in Apps
Regards,
- Brenden

Problem playing selected music with slideshow

Hi
I am having trouble playing music with slideshows since updating to iphoto 6. I can see all my playlists and I am able to select the playlist I want and this will play in the 'play music during slideshow' window. However, when I play the slideshow I receive an error message telling me that 'the music you have selected can't be found or can't be opened'.
This has only been a problem since updating and it doesn't matter what playlist I choose - they will all play in both iTunes and the selection screen for the slideshpw but not actually with the slideshow (the play music with slideshow box is ticked).
Any suggestions would be greatly appreciated as I am about to throw my mac out the window.

earnie82:
Welcome to the Apple Discussions. What version of Quicktime are you running? You should be at 7.1.5. If not update to it and give it another try.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Re: How do solve volume adjust problem on background music with voice

I have using Captivate 6,i have facing in adjust volume on background music with voice when drag play bar and using backward,forward buttons in preview.

Hey there,
And welcome to Apple Discussions.
If your iPod, is a 30 GB model, then it is a 5th generation iPod. This information can be found here: [Identifying iPod Models|http://support.apple.com/kb/HT1353]
There are a few ways you could go about solving this issue. The first thing is to enable Sound Check on your iPod, which can be found under *Main Menu -> Settings -> Sound Check*. Next, be sure the option is also enabled in iTunes. The setting is in iTunes preferences Playback pane. Place a check next to the box for *Sound Check*.
Another option is to adjust the overall volume of the song in iTunes, and then sync the updated changes to your iPod. To do this, locate the song(s) in iTunes, right->click and choose *Get Info* from the menu. From there, head over to the Options tab. Move the slider up and down depending on whether you want to bring the overall volume up or down and then hit Ok when you are finished. Lastly, sync your iPod to update the changes made to the altered songs. See if that helps.
There are also excellent 3rd party applications that can adjust the songs overall volume. One can be found [HERE|http://mp3gain.sourceforge.net>.
Hope this helps.
B-rock

Microphone hears music with any speakers off?? And random issu

Hi I'm new to this forum and since I didn't really get the answer to my question in most of the pages, I'll just ask for help in my own thread. Anyways!
There's lots of text coming up, so if you don't feel like reading it all (shame on you), just read what I marked with an arrow. What's an arrow? -> Just read.
So I got myself a X-Fi Xtreme Music few days ago, it's awesome and all, but yeah, that is so not the case when trying to plug my headset on the pc.
My old pc didn't have a soundcard so I got used to plug the headset to the front jacks and no problem, the microphone only recorded the sounds it was able to find flowing in the air. Ya know, waves and stuff. Now, with this new comp, I still do have front audio/mic jacks, but no sound! Geez I had to find out that I actually had to plug them onto the soundcard on the back of my PC. So yeah now everytime I try to plug them in I need to move like a ninja to get to the back of the PC. Table, cables and stuffs, ya know.
Tried installing the onboard sound driver to get at least sound from the front jack, but yeah. Success = 0 (its uninstalled now).
-> . Any way to get the front jack working without all these tedious tasks?
Okay that's the first problem. Now I got my headset on the soundcard after lots of effort, nice sound, microphone works, cool. But yeah today I went into teamspeak and people were telling me, "Darnit, I keep hearing myself in your headphones!!!"
How so, I am on headphones, I am not talking, my mic shouldn't send you anything!! What's the matter!!
"Yeah and I hear all your sounds and all, even the music you're playing on winamp!!"
Geez. He's right. I'm now in my own TS server and indeed, the microphone sends any sound ranging from speech to system sounds. It's like I'm having my microphone against the speakers, just that there are no speakers! No wonder anyone can hear any of my system sounds!!! And believe me I have tried messing with many options and I keep getting the same results. Heck, anything gets through with any speakers disabled, total silence in the room!!
Control panel. Output volume to 0, oh, yeah! The microphone only sends the sounds that it gets from outside, as I know it from any computer. Noone hears anything else than what I speak... including me! Obviously, since sound output is set to 0 lol. Meaning, from now on I'm doomed to play my games without sound but then at least I can talk properly in Teamspeak? Oh sorry not only on TS but for any applications the microphone is used.
-> 2. Any way to set the microphone so that it does NOT get the output sounds and ONLY what comes from outside, meaning, speech, random noise in my room, etc. Please do NOT tell me that the issue is hardware-bound and thus not possible. I would immediately get rid of this sound card cuz it's definitely a shame.
Sorry I am a bit in an bad mood since I got lots of complaints today because of this matter, and I simply can't find a rational way to fix the problems. Hope anyone takes the time to help me out quickly, because I'm not willing to put up with this issue too long either. Thanks in advanceMessage Edited by nekomilfy on 0-2-2006 0:6 AM

Thanks for your quick answers. Well Jason: I forgot to specify that I already did all of that when I tried finding a solution to my problem in other threads. I spent lots of time trying all those different options out, but, no improvement whatsoever.
Yet I'll try one more time again, maybe it all needed a reboot. Who knows, M$ often contributes to this kind of failure as well...
No I just tried again, that doesn't work. Anything still gets through to the microphone. I don't know what to do
And, no way to get the front jacks running? except reinstalling onboard sound and hoping for the best (ie. no conflicts)? >_>Message Edited by nekomilfy on 0-2-2006 02:2 PM

I cannot hear music with my iPhone 4

My iPhone has no volume when I try to play music

Hey Christopher Ouslan,
Thanks for the question. I understand you are experiencing audio issues when your EarPods are connected. The following article provides troubleshooting steps for these symptoms:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
No sound through stereo headset
1. Inspect the headset jack for debris and clean if necessary.
2. Connect the headset and make sure the connector is pushed in all the way.
3. Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
4. If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose Music > Now Playing, then tap Play.
5. Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
6. Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
7. Try a different song or video.
8. Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
9. Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
Thanks,
Matt M.

Problems playing some musics with iOS5

After I updated my IPhone 4 with iOS5, I'm having problems to play some musics on it. I can see the music, but when I hit play, nothing happens. Any idea?

I am having the same problem. After I updated, now when I shuffle songs it will skip past some songs and not play them. Then it will look like it is playing other songs, but nothing happens. I have to close the player and open again to get it to work. It skips about half the songs on my phone, and it appears to be random. I would love to know if there is a way to fix this without completely deleting the music off my phone and resyncing everything.

Can't hear music with out headphones

Any suggestions

can you hear other sounds from other apps ? It might be a hardware issue with the speaker, assuming you've got all the settings correct.
If you're convinced the settings are correct:
Try doing a hard reset: Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
If that doesn't solve the issue, you could also try backing up the device and restoring the device as new.
In that case, follow the steps in: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
If you're not able to restore the device, this one might help: http://support.apple.com/kb/HT1808
Using his article will erase everything on the device, so make sure you have a backup!
Good luck

TS1630 i cant hear music unless i have earphones in. when i unplug them i cant hear from iphone 4 speakers

it seems as if my iphone is detecting earphones when they are not plugged in. I could only hear music with earphones due to this problem.

You probably have debris in the earphone jack blocking the sensor. Try blowing hard on it, and quickly inserting/removing your earphone multiple times to dislodge it.

How do I activate the speaker on a iPhone 4s? Not the speakerphone , the speaker to hear music .

How do I activate the speaker on my iPhone 4s? Not the speakerphone , the speaker where you hear music , how do I activate that some can hear music?

You don't have to activate or turn them on. Do you have the side switch set to mute? Check the volume level. Can you hear music with the earbuds?

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

This category is for iPod shuffle. Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle? If it's not a shuffle, what is the iPod model...?
There is music there and I can play it connected to laptop.
Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
All mucis icons read "No music" and this is not correct
Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen

Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how

Can anyone help me with a problem i am having with my music on my iPhone 4S. I have put alot of Compilation CDs in my library on iTunes. I download these tracks onto my phone, everything is ok so far. Now, this is what is niggling me and I don.t know how to resolve it. This is my problem:
Have downloaded for example: Queen – Bohemium Rhapsody from a compilation album as well as a few complete Queen Album CDs into the iTunes library and then put them into playlists,
When I go onto my phone and select Queen on the MUSIC app using Songs tab at the bottom of the screen it will display all Queen songs and their resective Alum pics, that is all those not in a complilation album, .
If I know the song title I can select the songs tab and find the song that way,
I’ve tried fiddling with the settings in the iTunes app by going to ‘get info’ tab and trying to sort the problem out that way but am not having much luck.What I want the phone to do is show, for example all Queens songs including those in compilation albums. Can this be done, would be grateful for any ideas on how it can be done, that is if ic can be done, any ideas
Thanks for your help

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Got ipod4 Dec 2010 bought music with my ipod4 in dec 2010,jan 2011, and feb 2011 and i tunes will not reconizie them i have the reciept from when i purchased from i tunes store at that time. what is the problem anybody know?

Got ipod4 Dec 2010 bought music with my ipod4 in dec 2010,jan 2011, and feb 2011 and i tunes will not reconizie them i have the reciept from when i purchased from i tunes store at that time. what is the problem anybody know?

Is your computer authorized with the same account that you use to buy the muisc in iTunes?
More info here: About iTunes Store authorization and deauthorization
Did you try to transfer your music by right clicking on your ipod in the device list and choosing "transfer purchases"?
Did you ever sync your ipod to your computer?

I hear music and noise whenever I use anything to do with audio. How do I stop it?

I hear music and noise whenver I use anything to do with audio. How do I stop it????

-> [[Troubleshooting extensions and themes]]
Check and tell if its working.

Hello anybody hear to solve my problem.my phone linked with developer apple id and password its factory unlock but i am unable to active it....so please please help me...

hello anybody hear to solve my problem.my phone linked with developer apple id and password its factory unlock but i am unable to active it....so please please help me...
<Email Edited by Host>

when i coneect phone to my computer for activation i promt for apple id and password for activation.and it is showin apple id like ''ad*****@gmail.com'' but it is not my apple id and i tried with my another apple id but not working i upload screen shoot from itune thanks.......

Problems to hear music with Quictime on XP

Similar Messages

Maybe you are looking for