Problems Transporting SAPQUERY INFOSET (Global) From DEV to Production

I made modifications to an INFOSET using SQ01. I trapped the modifications in a transport. The modifications transported successfully to our Quality Assurance (Q/A) environment. When we move the transport to our Pre-Production environment the transport logs state it migratwed successfully, but the modifications are not present. Pre-Prod security mirrors our production environment, therefore I'm unable to "adjust" the infoset or generate it. That constitutes making changes which I'm not allowd to do in production.
Is there an established method to transport a global infoset from a test environment to production?

You can set the object changability flags to allow you to make mods to either of three major components of process chains:
1.  Process chain - lets you change the chain
2.  Process starter - lets you change the start process
3.  Process variant - lets you change process variants
Go to the admin workbench and select transport.  Find the changability options in the upper right portion of the screen and set the process starter to everything changeable.  Leave the other set to changable original or set to no changes to lock that portion down.
That should get you around your current issue. 
As an added check, us table RSPCCHAIN to figure out if the whole chain is ready and active for migrating.  Plug in the chain technical name and set the version to A and if the number of entries matches the number of processes all processes are active and ready to be migrated.

Similar Messages

  • Process chain transport in BI7.0 from DEV system to PROD system

    Hi experts,
    I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
    1) create the same process chain in Production system directly or,
    2) should i transport the same process chain to production system, i created in the development system.
    and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
    thanks in advance for all your expertise experienced help.

    It is always advisable to transport the process  chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
    During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
    Hope this is clear now.

  • Unable to transport Integratin Builder objects from Dev to QA correctly

    Hi,
    System : Pi 711 SPS03
    SLD 7.1 with  latest model and content
    We are trying to transport Integration Builder Objects from Dev to QAS, but the SID translation from DEV to QAS is not working.
    The interface is being imported as the source SID.
    We checked the SLD configuration for Transport targets, that is when we realised the below issue.
    Unable to Assign Business Systems in respective Business System Groups
    The expected configuration of the SLD is as below:
    UKD_400  - Integration Server for Dev PI 711 server
    INTEGRATION_SERVER_UKQ - Integration Server for QAS PI 711 server
    XI_QA - Business System Group for all Quality Systems in the landscape
              1) UKD_400
              2) UC1_ECC_60
              3) UED_400
    XI_DEV - Business System Group for all Developement Systems in the landscape
              1) INTEGRATION_SERVER_UKQ
              2) UC2_400
              3) UEQ_400
    We are unable to put the business systems in their respective groups
    All the Business systems are either being assigned in XI_QA or XI_DEV
    Please let us know if this is a product error in SLD 7.1, could not find any relevant notes
    Thanks,
    Govind
    Edited by: Govind Prathi on Feb 12, 2010 10:25 PM
    Edited by: Govind Prathi on Feb 12, 2010 10:27 PM

    We  have already  assinged the Integration server to their respective business system groups while creating the Business system groups.
       BSG: XI_DEV --> UKD_400( Integration Server DEV )
      BSG : XI_QA  ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
    As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
    But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
    Please help me understand if i am something in the configurations.
    Thanks
    Govind

  • Transport Questions and Questionnaires from Dev to QAS or to PRD

    Question
    How do we transport questions and questionnaires from dev to QAS or to PRD. Do you type all them again or there is process no. What is best process others do
    Answer
    As you must be aware, Questionnaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
    At least Iu2019m not aware of any other way to move the Questionnaire details across clients.
    I know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment
    Any body has soloution ?
    Thanks.
    Saquib
    http://aspirehr.com/HCM_solutions/hcm_solutions.asp

    Hi Vishal,
    As you must be aware, Questionaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
    Atleast i'm not aware of any other way to move the Questionnnaire details across clients.
    i know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment.
    So if you are a part of the Implementation Consulting team, it is your responsibility to train the core team in doing the activity in live environment. Hope this information helps.
    Best regards
    G Raj

  • How to transport an existing infopackage from dev to quality?

    Can anyone pls give me the steps for transporting an existing infopackage from dev to qual?
    I am not finding any infopackage in RSA - TRANSPORT CONNECTION
    Points guranteed.

    Here is the steps:
    1. rsa1->transport connection
    2. left panel choose 'object type', middle panel choose 'infopackage' and 'select objects'. Do a search here with your IP technical name.
    3. then choose your IP and 'transfer'
    4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
    5. after objects collection finished, create request. Repeat the same steps with grouping 'in dataflow before'
    6. If they are $TMP, then change the package.
    7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
    8. You can check the request in SE09 to confirm.
    9. If everything is ok, release your request and ask your basis/security guy to move to QA.
    Also you can open your InfoPackage and click on the truck symbol directly from IP window.
    Hope it helps..

  • Moving site page from Dev to production - DVWP from SQL server datasource

    Hey everyone
    I have seen a lot of resources online about something similar to my issue but nothing came to concrete help (content is old or not quite relevant) so I appreciate some help.
    situation
    - used SP designer 2013 to develop webpart site page
    - Defined datasource to SQl server database connection
    - Inserted dataview to the page based on SQL datasource
    Now I want to move the page from dev to prod. I created the datasources on prod same as DEV
    When I took the code of the pages on DEV and used on PRod , I had this error
    Web Part Error: An error has occurred. Correlation ID: 9baf979c-1607-3081-07b4-a7577a8956bd. 
    Searching showed that this is expected because the webpart config is stored in content database and some Guids are involved here. I read somewhere that I can change the guid to name for DataFormWebPart  but that keyword doesn't even exist in the
    code (must be for legacy version)
    So , how can , easily, move sitepage between sites on different servers? I do not want to redevelop things from scratch.
    Thanks

    Hi Aloha,
    According to your description, my understanding is that you want to move the site page from Dev to production.
    How did you move the page?
    If the page only contains the data view web part, then I recommend to export the web part from the page and then move the exported file to production.
    After that, add the web part in the new page in production.
    More reference:
    http://techtrainingnotes.blogspot.in/2010/02/sharepoint-how-to-move-data-view-web.html
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Problem while transporting Screen exit object from DEV to QAS client

    Hello All,
    I have developed screen exit for tcode 'ME51N' to add customer field in newly added TAB. To grayout that field in display mode, I have added code on the PBO event of that screen. Code for PBO even has been written inside the include. Exit is working fine on development client.
    After transporting the exit on QAS client the field graying out functionality in diplay mode is not working eventhough the include which contains the code for PBO even is exist on QAS. Also in flow logic if i double clock on the PBO module event, it says object does not exist, eventhough the include which contains the PBO event code exist in QAS.
    Please, help me to understand why the linkage between flow logic PBO event and the include where the PBO code has been written is not getting transported from DEV to QAS.

    Hi,
    First check the TR log if there is any errors. If no errors, then check if all the objects were properly transported or not.
    You might have missed out in transporting the enhancement activation(CMOD).
    Try to Rebuild the object list for updating the navigation index. You can do this from SE80=>Rightclick on function group=>More functions=>Rebuild object list.
    Thanks,
    Vinod.

  • Error while exporting/transporting the Business system from Dev to Quality

    Hi,
    We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
      404   Not Found
      The requested resource does not exist.
      Details:   Go to main page of this application!
    We have followed the following procedure to export :
    1. opened the business system.
    2. Clicked on export option
    3. tried to download
    then we got the above error message.
    Please provide your precious inputs to resove our problem.
    Thanks
    Ramesh

    Go through the following links for transporting XI objects.
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    ere's a good link for what you are looking.
    Re: Transport design and configuration objects
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Pls reward if useful

  • Transporting an ABAP query from DEV to QAS/PRD

    Hi all,
    I am trying to modify an existing query in DEV and move it to QAS and then to PRD. After making the changes in DEV, there was new transport request created, in which I had the changes for the query and in se93, i changed the name of the prog to the newly generated prog. after moving the transport to QAS, it is giving me a dump saying that the new prog generated in dev does not exist in QAS and hence the tcode does not work.
    after that i tried with the standard SAP report "rsaqr3tr" and tried to make another transport assuming that the program would be together with the transaction and will be transported together. But this does not work.
    I need help regarding this please - since it is an urgent rek - how do i transport the query after making changes to the already existing one - from DEV to QAS or PRD?
    Please explain in detail where and what I am missing.
    Thanks!
    Related answers are appreciated and rewarded.

    Hi Shyam.
    I would like to suggest a few references,
    [SDN - References for Query related to transport request|Query Related to Transport Request;
    [SDN - Reference for Transport Management System (TMS)|Transport Management System (TMS) of R/3;
    [SDN - Reference for Transport Request Problem|Transport reruest problem............;
    [SDN - Reference for Transport request Query|Query Transport;
    Hope that's usefull.
    Good Luck & Regards.
    Harsh Dave

  • Transport of XI Objects from Dev to Q system

    Hi Experts,
      I need the steps for moving the XI Object from Dev to Q system.
    I have completed the devlopment of object and i need to move to Q system.
    All the servers are maintained at London.
    what should i give to Basis people inorder to move to Q system.
    Thanks in Advance,
    Bhaskar

    Hi
    You have three Options when considering transports between systems in XI:
    1. File Method - Using the standard tools in XI IR and ID it is possible to export the content to a filesystem and following this import into another environment using the import functionality. The advantage of this is that it is easy to do and not implementation overhead. The disadvantage is that you do not have clear tracability (you xhould keep all exported packages on the server).
    2. Using CMS - This uses the NWDI infrastructure to transport packages between environments. Only consider this option if you have NWDI in place in your environment otherwise in my opinion the overhead is too great. It only applies to Java Objects e.g. you cant transport for example ABAP Proxy classes using this methodology.
    3. Use CTS+ or enhanced CTS - This allows Java Objects to be transported to by attaching Java Objects to transport requests. This is good if you are an ABAPer and familiar with the se09.se10 transactions. It does however have and implementation overhead and also you must first export the Objects from IR and ID first as per point 1.
    I think in a low usage env point 1 is fine .. for an env with 100's of interfaces I would go for 3.
    All the links I think are in earlier posts ..
    Thanks
    Damien

  • How to transport an LSMW object from dev to Quality and to Production?

    hi All,
             Could any one please specify how to transport the lSMW object from developmen to Quality and finally to Production?
    Thanks in Advance.
    Regards.
    Abhilash.

    Hi,
    The "cleaner" way is using normal transport procedure via "Extras->Generate Change Request".
    This will transport the entire project though, not possible to transport a single object this way.
    step by step
    1. Run Tcode LSMW in source system.
    2. in the menu bar choose Extras-->Export. Now give the filename and save in your desktop.
    3. Now login to destination system. again execute LSMW.
    4. Now goto Extras-->Import.Give your file which was downloaded earlier.
    5. Now tool bar click on import with diffrent name option and give your new project and subprojectname.
    6. Now execute all steps.
    Also refer the below link
    http://help.sap.com/saphelp_crm50/helpdata/en/da/a22506a3291b418b759524b278dcde/content.htm
    Please reward points if it helps
    Thanks
    Vikranth

  • Transport Web Template, Query from development to productive system

    Hi!
    How can I transport Web Template, Query, workbooks from development to productive system?

    RSA1 ---> Transport Coonection ---> Object Types -
    > Select Web Tempelate ---> Drag to right and group under transport
    Similary do for other objects
    Thanks
    Amit

  • Best practices for deployment from Dev /Staging /Production in SharePoint ?

    Hi All,
    What is a best practices to deploy SharePoint Portal to dev / staging / Production.
    I have custom solution deployed using WSP file. But I have done some changes using sharepoint designer.
    Like as Designer workflow, master pages etc.
    How can I deploy my document libraries and list to dev to prod using best practices?
    Thanks
    Balaji More

    Hi,
    According to your post, my understanding is that you wanted to know the best practices to deploy SharePoint Portal in different SharePoint environment.
    If the site is not existing in the production server, we can save the site from the development server, and then import it to the production server.
    But if the site is already existing in the production server, we should follow these steps to just add the taxonomy and content types to the production server:
    Save the site from Dev as a template
    Import the template as solution in Visual Studio
    Remove unnecessary items from the solution(Please pay more      attention on it. If a content type/list... in the solution is existing in      the production site too, it will replace the
    same object existing in the      production after deployment)
    Package the solution
    Deploy the solution in the production
    For more detailed, please see:
    http://ahmedmadany.wordpress.com/2012/12/30/importing-sharepoint-solution-package-wsp-into-visual-studio-2010/
    There is a similar thread for your reference.
    http://social.technet.microsoft.com/Forums/en-US/7dcf61a8-1af2-4f83-a04c-ff6c439e8268/best-practices-guide-for-deploying-sharepoint-2010-from-dev-to-test-to-production?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Deployment from DEV to Production environment

    Hi,
    What are the best possible ways to deploy the visual web parts and Pages from development environment to Production environment.
    As I am very much new to Sharepoint, I would like to have the safest methods to do the deployment into production. Please also suggest the prerequisites.
    I have a solution with number of visual web parts in the development environment which is working fine. Need to move the Visual web parts to production (Existing site). So please suggest the safest methods.
    Thanks and Regards,
    Satish
    Sathiish Reddy

    Hi Satish,
    From your description, my understanding is that you want to deploy your solution from development environment to production environment with a safest method.
    These links below about moving content from environment to another environment could be helpful to you:
    SharePoint 2013 Dev/Test/Production environment - Moving content
    http://sharepoint.stackexchange.com/questions/78483/sharepoint-2013-dev-test-production-environment-moving-content
    How to deploy webpart on production (not debugging) server?
    http://sharepoint.stackexchange.com/questions/17779/how-to-deploy-webpart-on-production-not-debugging-server
    you could also have a look at this link below about SharePoint Content Deployment Wizard:
    How do you deploy your SharePoint solutions?
    http://stackoverflow.com/questions/9543/how-do-you-deploy-your-sharepoint-solutions
    Best Regards,
    Vincent Han
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Error while transporting Planning board profiles from Dev to QA

    Hi All,
    I have created planning board profile by copying an already existing Non-Standard profile.
    The Profile is working fine in Dev and i am able to see all the charts and Graphical objects as per the settings in the profile.
    But when i transport the profile to QA, it is giving error SAPBARC with text "Illegal number of columns in Chart". I checked what setting have been transported, and found that many of the setting have not been transported for the profile.
    Also tried to move all the profiles, thinking, there might be some dependcy among them. But the problem still persists.
    Awaiting for help...
    Thanks in advance..:).

    Hi Davis,
    Before transporting transformation make sure either of source or target should availble in target system.
    suppose you have a transformation between Data source and Data Target, first transport Data source, then transport Transformation along with data target.
    Before tansporting Transformation either source or target should be avaialble in QA system..then only transportation will happen smoothly..
    Hope this helps.
    regards
    SK

Maybe you are looking for

  • Flexible Report - choose the cols (and # of cols) on the fly - PDF

    Hi I have a user community who would like to be able to choose the columns in a "Flexible Report" when they want to run a report to output to the browser, and then to PDF. Now, I've played around a bit with setting up a number of page items - say 5 -

  • Error while saving form in Form Builder

    Hi, When i create and save form in XML Form builder i get an error "The Edit form does not contain  a save button or link", I had even configured the save button but still i get this error. Does any one has idea about this issue. Regards, Ravi.

  • Best way to set up iPad mini for child?

    So I bought my 3yr old an iPad Mini since he already knows how to fully operate most things on my iPhone! Now when I go to set it up, I don't want my music and apps and other content popping up on his iPad. Now can I create an Apple ID for him but se

  • Day dook in ECC 6.0

    Hi, Gurus just look into this issue, ISSUE: Is there Any possiblities genration of daybook in ECC.6.0.Here the Client legacy System was Tally.there they used to get the line items day wise ,where as here it is Apeearing from the day of year started.T

  • Transporting Iviews from QA/DEV system to production system

    Hello All, I have some iviews that are based on BW report Iview (BEX ). I have them developed in the qa environment. How can I transport the same iview to the production server. The portal landscape is some thing like this. We have a devlopment and q