Problems using new nano during workouts

I bought my new nano for more capacity than my 1st gen, which still works fine. But the touch screen does not work as well for me as the clickwheel did. The best location for the nano is clipped to my waistband, and I can operate the clickwheel by feel, to change volume or skip or repeat selections, which I do frequently during long workouts. But the touchscreen goes to sleep, and in any case I can't find the controls without taking off the new nano and looking at the screen. Sweaty clothes rubbing over it also actuate the touchscreen menus sometimes. So I've given up on using it and have gone back to using my old nano. Too bad, Apple presents the new nano as a workout tool but it certainly doesn't work that way for me. I'll try to figure out some way to get rid of it and get a slightly older refurb-ed nano with a clickwheel.

I'm sitting at my computer right now with my 6th Generation Nano (Product Red) and my Ultimate Ears headphones and that adapter. I'm able to skip to the next song, return to the start of that song, pause, hear voiceover, raise the volume, lower the volume, ...Works like a champ and I've never had a problem with sweat getting into the switches when I used it with my 3rd Generation Shuffle OR with my 6th Generation Nano.
I do suggest you use Google and find a plastic docking plug for the Nano when you use it while working out. It says that about the adapter because that is what it was developed for. It will work just fine with the Etymotic.

Similar Messages

I am having problems using my iphone4 during calls. When any part of my facial skin touches the screen, it would either go mute, hold, speaker or whatever part my skin accidentally touches the screen.The other caller then cant hear me

I am having problems using my iphone4 during calls. The screen does not automatically lock to prevent any part of my skin or face from touching it. When my skin touches the screen it would either go mute, hold, divert to speaker phone or calls another in my contact list. The person i'm talking to then cannot hear me suddenly when in mute or hold. Is there any application for my iphone4 like a "screen lock" when it is being used on calls?

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Problem using NEW webcam...

OS win98SE.
Have successfully installed my new webcam Vista Plus Model: VF0090. I now have a problem using it!
As per instuctions, I go to WebCam Centre and press 'capture'. I then get a message along the bottom of the screen saying 'this device is not available, it may be used by another resource'.
I'm completely at a loss as to what the problem could be.
Any one out there who could help?
Regards
Sue

Got the same problem (1), in addition to the installer freezing (2).
(1) There seems to be a problem with the software - the driver is OK. I used it to record still pictures and movies with MS Photoeditor, Irfanview, WinTVCap and YahooMessenger.
I played around for hours at no avail.
---> Creative - fix that problem in both Cam Detector and WebCam Center!!!
(2) The Setup freezes, then when you kill it it comes up with a DOS window complaining about not enough resources (?!?!?!).
Work-around:
a - Run Demo.exe from the CD;
b - it asks for a *.dbd: look for "your region".dbd, e.g. europe.dbd
c - continue and it will install ...
However, do not know if the install process is correct, because of problem (1). My guess is that it is, and that the problems (1) and (2) are independent.
Again:
---> Creative - fix that problem in with the setup!!!
e.g., use a setup which is less "cool" but which is working.
Regards, Hans

Itunes problems with new nano, purchased songs

Hello all. I am having a few problems with my itunes and newly purchased nano that hopefully you guys can give me some advice on. First of all, when i plug in my nano, it does not recognize it unless i close itunes and reopen it. Then, it takes a few minutes to open and acts like it is a new nano every time i open it. Meaning, it asks me to name the nano and asks me to apply all the settings etc. After that it works. I then can eject it. If I then re open itunes, with my nano not plugged in, itunes thinks that my nano is plugged in and says its corrupted. If i attempt to do anything in itunes, it freezes up.
In an unrelated problem, i am forced to authorize my computer to play my purchased songs every time i open itunes. It never remembers when I authorize it.
Thanks in advance for your help i definitely appreciate it!

OK, could not resist. I did go ahead and put my old run history back into the new & now restored Nano. No problems. Everything is fine. (Be remember, this is not something that is supported or approved by Apple or Nike.)
There may be no connection between adding the old run data files to the new Nano and the sound & freezing problems. Others have already complained about those.
However, what I will say is that you should never mess around with the Nike+ xml "Preferences" file or the "Best" file. These are invisible for a reason. You can put your old xml run data files into your "latest" folder and thus get them on your new Nano, but you CANNOT change your Totals on your new Nano no matter what you muck around with. However, if you try it and things go wrong, doing a "restore" should save the day.
And it should save the day for sound problems and recurring Nano freezes unless you have a defective Nano.

Trying to use new nano with old mac

Hi, I was wondering if someone could give me some advice.
I recently received an ipod nano as a gift. Unfortunately, my ibook is from 2001, and i am still running the original OS 10.
From what I have read in these discussion forums, it would probably not be wise for me to try to install OS 10.4 on my computer. However, I believe that OS 10.4 is needed for my computer to be compatible to my nano.
I have hundreds of songs on my ibook, which I would really like to transfer to my new ipod. What can I do?
thanx
ibook Mac OS X (10.0.x)

Apple's minimum specs for the Nano are 10.3.x basically because that was the first version of the MacOS to support USB 2. However, many people, including my wife, are using a Nano with computers that have USB 1. So the real limiting factor is what version of the OS your computer can comfortably run. I wouldn't recommend 10.4 but 10.3 is certainly doable. I know several people running around with the colored iBooks running 10.3. And certainly 10.2 is doable though I don't know if iTunes 6 will run on Jaguar.

Why isnt the new nano(7th) workout friendly? Wheres' the clip?

My nano 6th generation went in the washer, is there anyway to fix it without buying a 220$ new one? Id get the new nano, but theres no clip, kinda worthless.

I'm sure lots of people will be along with water resistant cases with clips.
You can do an out-of-warranty replacement at your nearest Apple Store for $65/$75. You will get a service replacement.

Can you use new Nano with iTunes 6?

I'd like to get the new iPod Nano, but I have Mac OS 10.2.8, so I can't get iTunes 7. It says on the system requirements that I need 7, but is it really necessary? (i.e. is it possible to use the new iPod Nano with iTunes 6?)

Welcome to Apple Discussions!
While I haven't tried, I would image the answer is no.
Usually when iPods are released with a new iTunes version, they aren't made to be/are made not to be compatible with previous iTunes versions.
It may work, but I can't be sure either way (someone else may have tested this).
In the past, even if iTunes updated the iPod, there tended to be problems syncing.
btabz

Problems using new embedding method

My embedded Quicktime movies don't always play correctly! The problem I am having is when I load the page - rather than playing the movie at the correct dimensions of 640x376 (16 pixels taller than the .mov for the controller), I get just the quicktime controller centered in my "theater" without a picture, as if it's been squashed. See if this happens for you as well at the link below. If it plays fine try reloading a few times, for me it goes back and forth between working and not working.
Here's a sample page with the problem I'm having:
http://www.ghostlightdigital.com/portfolio/prototype/train/low/
I've followed the instructions for "External JavaScript Solution Two" found in the doccument at http://developer.apple.com/internet/ieembedprep.html but am still seeing problems in my website. I have many videos on this website at varying qualities, but I stick to basic HTML with some javascript (the latter I am no good at).
Here is the movie file that should play in my page:
http://www.ghostlightdigital.com/portfolio/prototype/train/low/prototype-train-l ow.mov
Here's the code I've included in that page where the movie should play:
<script language="JavaScript" type="text/javascript">
QT_WriteOBJECT('prototype-train-low.mov', '640', '376', '',
"autoplay", "true",
"align", "middle");
</script>
Here's the code included in the <HEAD> tag of the page:
<script src="http://www.ghostlightdigital.com/portfolio/includefiles/ghostlight-quickti me.js" language="JavaScript" type="text/javascript"></script>
Here's the external Javascript file (unmodified since I downloaded it, except re-named):
http://www.ghostlightdigital.com/portfolio/includefiles/ghostlight-quicktime.js
Phew, okay! I've looked around these discussions and haven't found a solution. The same problem happens on my G5 using the same OSX and Safari. Can anyone tell me what I'm doing wrong? Thanks for helping!
-James
G5 Mac OS X (10.3.8) Safari 1.3.2 (v312.6)

The page loads just fine and both the low and high versions show a 640X360 video (plus the QT controller). Safari 2.0.4 and Tiger 4.7.
The page source code is correct. Your link to the "download" should include text that asks the visitors to right-click (Control-click) and choose to "save linked file". As it works now most visitors will only have you movie open in a new window if they just click the direct link. Only QT Pro users can save from this new window.

Problem using new editor

Hi people! I hava a strange issue in my machine. I'm currently using SapGUI 710 patch level 7 in my PC. I'm trying to use the new editor, but when I set it and try to open any source codes in SE38 or in SE80 (source codes editor in general) the SapGUI freezes and the only way to get off this, is endind SapLogon with a right click on tray of windows.
Anyone already seen this? If I use the new editor in other machine with the same SapGUI and same server, its works fine...this problem is specific to my machine...
Thanks a lot!

Hi Jack
I encountered the same problem last week in upgrading from 710 Patch 5 to 710 Patch 9. Uninstalling and applying a previous patch to the last one you installed will fail also. Incidentally prior to installing Patch 9, I was happily editing source code in the new editor.
This is how I managed to resolve it:
Had a look around the net and found information on SAPSWEEP.EXE (created by SAP themselves). Used SAPSWEEP.EXE from the setup folder of SAP GUI 640 - this will remove Registry entries and files if you tell it too. I cleared everything at first. If you use this, pull the network cable on the machine in question just in case. It detected a SAP GUI setup I had copied to my Temp folder in case I lost network access, and did think about removing that however I stopped the program running at that point. So it may (I don't know as I did not want it to check the Network drives) delete install instances if you are not careful.
I then removed the following folders (due to the failed uninstall earlier):
C:\Program Files\SAP
C:\Program Files\Common\SAP Shared
C:\Documents and Settings\<my userid>\SapWorkDir
C;\Documents and Settings\<my userid>\Local Settings\Temp (all files removed)
Rebooted laptop.
Re-installed SAP GUI 710 Patch 0. Editing code worked at this point.
Re-installed SAP GUI 710 Patch 9 and still able to edit the code.
I believe my problem came about after a possible corruption involving LIBRFC32.DLL, but I then also lost network connectivity and the ability to acquire a DHCP delivered IP Address. I understand that in 710 the RFC methods have been enhanced, plus MS recompiled the LIBRFC32.DLL using Visual Studio 2005 (rather than .NET 2003).
I have not upgraded to Patch 10 (corporately we are evaluating Patch 9 for release).
Hope that helps to get you back editing again!
Nick

Is there any problem using a nano sim for a 5c in an iPhone 4s

Hi, long story but basically I need to know if I can cause any harm to my iPhone 4s by putting a nano sim (4g) designed for an iPhone 5c into it? The rep at ee put it in for me but he said it would work temporarily (don't ask!!) please can someone give me some clear info on this? Thanks in advance, kt

Hi, yeh got an adaptor from ee shop but the geezer was so rude (I think it was because I hadn't bought my phone from him but had instead gone for an online deal) & he wasn't prepared to explain what he was doing to my phone (just that it would work temporarily!) anyway, all's well, phone is working & I'm just waiting for new sim for 5C for my hubby. If that all comes through ok I'll be happy but they have taken hours of my time over the last 7 days & I have lost a lot of confidence in them. I have been with orange for years now (never a problem - maybe I was just lucky?!) but strikes me that something's rotten at the core if Misselling, rudeness & awkwardness are the way to go. Happy staff tends to mean happy customers. Get that mix wrong & your on a slippery slope.
Anyway, thanks for helping to put my mind at rest re sim. Merry Christmas all!

Problem using new ABAP editor in GUI 7.20

Hi Guys,
I need some help. I am running SAP GUI 7.20 on Windows 7 professional.
When I open the new ABAP editor from SE38 it does not open the mouse pointer keeps rotating for ever.
I tried changing the setting to ABAP Editor old. It did work this time, I could open the ABAP editor.
I also tried uninstalling and re installing the SAP GUI,but the problem persists.
Please suggest if anyone has a solution for this.
Thanks
Ramya

Hi
check OSS Note 1456628 This may be helpful [Click here|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1456628]
4.1.1.1 Fixed a CrossThreadException due to the change of the mouse cursor in the repair background worker. Fix an KeyNotFoundException in the construction of the tree in the edit form.
also did you try Installing MSXML 4.0 software as mentioned by Suresh Dareddy
[Ref Post|http://forums.sdn.sap.com/profile.jspa?userID=3753798]
Regards,
koolspy.

NSS326 Problems Using New SFTP Features

Is anyone else having issues using the new SFTP feature that was released in the 1.2 firmware? We are running firmware 1.3. When we try to connect to the NSS326 via SFTP, the only user that can login is "admin" and they get placed directly into the root of the device. We want to use the SFTP feature to backup Communications Manager (which requires SFTP) but being dumped into the "root" does not appear to give us access to the vast disk space on the unit, so the backup fails. Is there a way to configure the SFTP options, because the administration GUI only specifies FTPS (Explicit)? Thanks.

On my NSS326, I have a single RAID-6 volume and it's mounted under /share/MD0_DATA. Each shared folder is containted in that directory (i.e. Web), but is also symlinked to /share, so my Web content is available under /share/Web. If you create a new "backups" shared folder, for example, it should be available under /share/backups. You could try specifying that destination directory for your SFTP backups.

Problems using new version with many sites including facebook...how do I uninstall it NOW

Can't access a multi-list site for my business as a real estate agent...totally screwed up my chats on facebook...I want to uninstall this new version

-> [[Uninstalling Firefox]] - Uninstall your current Firefox
* REMOVE USER DATA AND SETTINGS
* Restart your system
-> Download latest Firefox version from one of these links using some other Web Browser:
* http://www.mozilla.com/en-US/firefox/new/
* http://www.mozilla.com/en-US/firefox/central/
* http://www.mozilla.com/en-US/firefox/fx/
* http://www.mozilla.com/en-US/firefox/all.html
-> [[Installing Firefox]]
Check and tell if its working.

Problem using new modem with TC

Hello all. I successfully set up a new AT&T DSL modem today which is working good when connected to my iMac. But when I connected it to the WAN on the TC things weren't working like before. Using AirPort Utility, I did a factory reset and while going through the setup routine, I got a message that I never saw with the old modem:
So I hit continue
Then update. After finishing and closing AirPort Utility, the iMac complained:
And of course I can't go online using TC. Any advice?

The message was right .. you should have put the TC in bridge mode.. you have smashed the setup by using double NAT and something is also using your address..
Shut down everything.. reboot in order.. modem.. TC.. computers. 2min gap for everything.
That should get rid of the IP conflict.. then do the setup again. This time follow the instruction to bridge the TC.

Weblogic 6.0sp2, problems useing new XML Registry

I'm trying to configure a parser other than the Built-In Parser, but WLS seems
to still us its default.
I follow the documentation at http://edocs.bea.com/wls/docs60/xml/xml_admin.html#1055027,
and use xerces 1.4.3, also creating a new server that is targeted.
I have attached a java file that I set as a startup class, targeted to myserver.
It shows the classname of saxparsers.
I allways get the following printout:
parserFactory: weblogic.xml.jaxp.RegistrySAXParserFactory
saxParser: weblogic.xml.jaxp.RegistrySAXParser
parser: weblogic.xml.jaxp.RegistryParser
But if I run the program from the command prompt, with xerces in the classpath
I get the following:
parserFactory: org.apache.xerces.jaxp.SAXParserFactoryImpl
saxParser: org.apache.xerces.jaxp.SAXParserImpl
parser: org.xml.sax.helpers.XMLReaderAdapter
Anyone now anything about this, seems like a bug?
-perotto
The parser
[PrintParserInfo.java]

hi,
try keeping the xerces.jar file before the weblogic.jar in the classpath of the
server script...
cuz' weblogic.jar file includes weblogic xerces parser..
but weblogic does not support all the features that xerces 1.4.3 version support.and
they(BEA) does not recommend to use other versions...
hope it will help you..
Vijay
"Per Otto Christensen" <[email protected]> wrote:
>
>
>
I'm trying to configure a parser other than the Built-In Parser, but
WLS seems
to still us its default.
I follow the documentation at http://edocs.bea.com/wls/docs60/xml/xml_admin.html#1055027,
and use xerces 1.4.3, also creating a new server that is targeted.
I have attached a java file that I set as a startup class, targeted to
myserver.
It shows the classname of saxparsers.
I allways get the following printout:
parserFactory: weblogic.xml.jaxp.RegistrySAXParserFactory
saxParser: weblogic.xml.jaxp.RegistrySAXParser
parser: weblogic.xml.jaxp.RegistryParser
But if I run the program from the command prompt, with xerces in the
classpath
I get the following:
parserFactory: org.apache.xerces.jaxp.SAXParserFactoryImpl
saxParser: org.apache.xerces.jaxp.SAXParserImpl
parser: org.xml.sax.helpers.XMLReaderAdapter
Anyone now anything about this, seems like a bug?
-perotto
The parser

Problems using new nano during workouts

Similar Messages

Maybe you are looking for