Problems when exporting to AVI, firts gave me "unknown error compiling movie" and then just exports small parts of timeline, I have to export the different parts, put it back in a timeline and then I can export it complete...it was working fine, HELP!!!

I proyect is 30 minutes long, im using only AVI files, no mpegs or anything, when I tried to used the encoder because it gave me the message "Failed to return a video frame", but i checked, started the proyect over...and there is no empty frame or anything....Please help!!!!!

The Failed to Return Video Frame error is often associated with a gap between Clips in the Timeline.
Zoom your Timeline view to max horizontal, hit Home and then PageDn repeatedly. Watch the CTI and also watch for any visible gap. The CTI should jump directly to the next Clip (be careful, as it will also include any Clip on any other Video Track, or Audio Track). If it seems to "hiccup," or "jutter," you have likely found your gap.Though it can only be as small as 1 frame, even with the Timeline zoomed in to max, they can be difficult to see.
Close the gap, and do not create another along the Timeline by doing so. Test your Export without the gaps, and see if it completes.
Good luck, and be sure to watch closely and carefully, as gaps can be tough to spot.
Hunt

Similar Messages

Hello! help me, please! while exporting video i faced an Unknown error compiling movie

while exporting video i faced an Unknown error compiling movie. the problen somewhere in the biginning of the video. the sistem automatically chooses user's type of export and cuts the beginning(

Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172
-and WMV files frame rate http://forums.adobe.com/message/4629210

TS1702 After I have upgraded to the new iOS 6.1.2, the email software doesn't work and is not downloading. While before it was working fine.

After I have upgraded to the new iOS 6.1.2, the email software doesn't work and is not downloading. While before it was working fine.
How to fix this?

There seems to be massive amounts of problems with every aspect of iOS 6. From what I understand all you can do is try and reset your device and pray that Apple bequeaths working software next time or allows users to revert to iOS 5 while they search for someone who knows what they are doing. Perhaps you will need to use an alternate email app until then? (Although, Gmail seems to be the only one that works properly)

Unknown error compiling movie - tiny sections export fine - no one bad clip

This week I've been dealing with a huge pain exporting a 6 minute video on my retina macbook pro. The sequence is 720p 24fps (23.976) and contains a mix of 720p & 1080p (scaled) AVCHD footage, a couple of 1080p GoPro shots, some 1080p time-lapse clips (quicktime h.264) and some mp3 files.
Earlier I was having trouble with playback in premiere, but by replacing one bad clip and rendering the rest in small chunks I am now able to play back the sequence with zero issues within premiere.
However, when I go to export the whole movie, or even a significant chunk, either the system starts spinning its wheels partway through export or I get "error compiling movie - unknown error."
The workaround I have found when that happens is to restart premiere (often having to force quit) and then try to export a smaller chunk. (Restarting seems to be necessary after an export has failed). Sometimes the chunks become ridiculously small, but there is no one clip or section that won't export if the clips are small enough. I have also tried cleaning the media cache trashing the preferences, neither of which have changed anything.
Even when I export using the sequence settings of the sequence (which has already been rendered and plays fine within premiere) the problem persists.
My first question is: how can there be an issue exporting a video with identical settings to a sequence that has already been rendered and plays back fine?? Am I wrong in understanding that no conversion is required in that case? Clearly there is something about the process that I don't understand.
My second question is, if no one clip or clips are to blame, are there any likely culprits in my system? Is there perhaps a less time-consuming workaround?
Finally I want to ask: what good does it do to allow users to put different types of media into one timeline if they can never export it?!?!
This is super frustrating, thank you for any help or insight.

So, I ran into this the first time recently. I discovered it when I copied an adjustment layer for quick grading with an RGB Color Corrector and Color Balance effects in it from a rehearsal cut of a short film.The effects worked fine and rendered out without issue. I imported the sequence into my 'final' cut so I could reuse the titles and adjustment layer. I copied the adjustment layer to the new rough cut of the final sequence and ran into this error when I tried to render it, but only after applying the adjustment layer. I found that if I turned off the Color Balance, the sequence rendered fine. I found that if I moved the Color Balance above the RGB Color Corrector, the effect of the RGB effect completely disappeared AND it rendered correctly (both effects turned on) - so reversing the order worked, but effects were weird. I also found that if I added ANY non-GPU accelerated effects to the RGB Color Corrector that I'd get the same compile error (unknown).
I went through and deleted clips until I got to 0 on the timeline, added a new one back on, and it still wouldn't render. So, I created an entirely NEW sequence, copied all video and audio (not adjustment layer) from the original failing rough cut of the final sequence, and pasted it into this new sequence. I also copied the adjustment layer again from the rehearsal cut into this new sequence and it is rendering just fine.
HOURS WASTED DOING THIS! It would be awesome if Adobe actually tested their products before releasing them instead of forcing us to do it for them. My project consisted of about 30-40 different clips and audio, all from the same DSLR (Nikon D810), nothing fancy, two effects in an adjustment layer applied to the entire sequence, and Premiere couldn't handle it. Given this and some of the comments I read while troubleshooting this on this forum, gives me pause in trusting Adobe products for any real work that has a deadline (unless, of course, you build in the required Adobe testing time into your budget).
So, just another data point; something else to try. Create a new sequence, and copy everything from your non-working one to it, and see if this will jump-start Premier. Worked for me. Good luck.

I cant see my mail messages in yahoo mail beta with Firefox4 beta but I can with Internet Explorer, it was working fine till about 3 days ago

When I open Yahoo mail beta I am unable to see any of my emails, this was working fine till about 3 days ago. If I change to classic mail they are there.
I can see them in internet explorer with yahoo mail beta

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

TS5329 i did an update on my sons phone and now it is in recovery mode and than refuses to reboot. says it can not restore? it was working fine until it called for this update and while doing it it went into recovery mode?! please help!!!

i did an update on my sons iphone 4s and now it says it is in recovery mode and that it can not reboot or restore the phone?! it will not power down normal and keeps saying hook to itunes. all i did was an update and it went into recovery mode and will now not restore! how do i fix this???

Do exactly as it says, connect to a computer running iTunes and restore.

HT201210 hi.i have problem in my iphone 5 itunes showing an unknown error 1669 why and why is showing this..............

helloooooooooooo
anybody here

Just to confirm is your iPhone jailbroken?. Now in terms of error 9006 in the article http://support.apple.com/kb/TS3694 it says this:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

I am unable to read my emails - the subject line comes up but then no content is displayed. It was working fine until yesterday.

I am unable to read my emails - the subject line comes up but then no content? It was fine until yesterday. Any suggestions?

Try closing the Mail app completely and see if the email text shows when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My hp photosmart 4700 is showing offline and i cant get it to print. it was working fine yesterday,

I have a HP Photosmart 4700. It is set up as wireless on my network. today it says it is offline and I cant get it to print.

Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I had a case that I drop little juice over my macbook air, I dried it immediately and it keep working fine, as this happen while I am traveling I kept working on it for around two week, it was working fine except that the few key became sticky.

I had a case that I drop little juice over my macbook air, I dried it immediately and it keep working fine, as this happen while I am traveling I kept working on it for around two week, it was working fine except that the few key became sticky.
When I back to Jordan I sent it to the authorized support center “ Multivision” in Amman and asked them to help in cleaning the keyboard as it still sticky and I explained to them that the issue and I clarified that all are working fine.
For a two days they didn’t back to me and they answered that they are still checking it, and then after they just called me saying that my macbook is damaged and not working and its better for me to buy a new one!!!
They say that the liquid damaged the main board! I explained to them that this can’t be as it was working fine when I delivered it to them and I didn’t ask them to open it I told them to help in cleaning the keyboard!
I am complaining about this support behavior and they were not cooperative nether polite in communicating.
I am not convinced that the liquid damaged my macbook and I think that the staff at “Multivision” are not qualified and did something wrong to damage my macbook!
I need you help to investigate this issue and have a feedback.

Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
https://www.youtube.com/watch?v=gLbasVD69xo

I have an ipod touch 2nd generation and i have a white screen and will not turn off( it was working fine this am) help!!

I have a ipod touch 2nd generation and i have a white screen and will not turn off. My ipod was working fine this am, i was checking my facebook acount when it just went white.

That symptom is covered here:
iPod touch: Hardware troubleshooting

Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8% before this happens any idea how to fix I have a movie deadline to meet!

Hi all,
Finished editing a short movie.
Then went to share on vimeo but got this message - see also screenshot when I tried to export to desktop.
Problem when exporting to Vimeo I get message "The share operation has failed. Quicktime error: -50" The file only gets to 8%.
Have tried deleting my render files for the project and also another fix mentioned of deleting any black space files on the edit itself but neither work?
Just upgraded to OS Mavericks could this be causing it? If so how to downgrade?
thanks
Louis B

Thanks for your help both, I called Apple tech support and spoke to a really helpful chap called Andrea who helped me out. Now got my Master file sorted and am trying Vimeo upload again.
Just to clarify points for people out there with the same issue:
First steps
- Ensure background rendering is turned off in preferences
- Delete project and events render files
- If upgraded to Mavericks then go to FCPX in finder under applications hit buttons 'CMD' and 'I' together and tick the 'prevent App Nap' box.
Next Steps
I had already done all of this when Apple Tech spoke to me so we discussed the message 'Quicktime -50' and what it meant. It wasnt a purely generic error message but was not detailed enough to point to one specific issue. This problem had occurred in previous years (so Mavericks not wholly to blame) and patches were issued over the years by Apple to help resolve some of the problems.
The message essentially is indicating that there is a problem somewhere with the media in some way shape or form.
My export went to 8% then failed. Apple's answer was that the project settings were corrupted in some way.
So what they suggested (so simple I could kick myself) was to select all the media files by 'CMD + A' then copy them 'CMD + C' then create and open a new project timeline, and then paste in 'CMD + V'.
Then we tried export again this time to a master file with some settings detailed by Apple.
The difference now was it got to 40% then failed but due to a different reason 'error -1 frame 10124 error'
At last we get past the project issues and into the event media issues, it seems that when I loaded the compact flash last night, the iMac kept ejecting the reader so had to copy files over quickly and seems that some of the file clip I used although showed on the viewer, didn't seem to have loaded all the correct media, so selecting this clip frame 10124 on the viewer I found that it showed as red on the frame row which implied an issue. So I simply bladed it off and deleted it.
Then I reran the export to Master file and it worked, though jumping from 40% to 100% complete was a shock to me!
Now am trying the export to Vimeo - hope this helps some of you out there. Worst case pick up the phone to Apple and speak to the Final Cut Pro guys they can help.
best wishes,
Louis B

Having problems when exporting .swf file as an animated gif

Hi:
I was wondering if anyone has ever had any issues exporting a
flash file as an animated gif? When I do so, the image quality is
very compromised and the animation is distorted. I know this is not
very specific question, but I have never encountered this issue
before, and I am trying to help a co-worker. I don't understand why
it looks exactly the way we want it to look as an swf file, but not
as an animated gif? Can anyone point me in the right direction as
to what to look for as the potential source of this problem? I have
the swf file, although this would not be very helpful as I don't
have access to the flash file (but I can send it to you if that
would help). We tried unchecking the feature to optimize the image,
and changed the color pallete to adaptive, but this didn't solve
the problem. I also tried removing any unnecessary layers prior to
the export. Basically, I'm not sure as to how to proceed and what
may be causing the problem. I also want to mention there is a
placed image on the stage. Could the type of image placed be
causing the problem when exporting to a gif file, but not as a
.swf? If anyone could help, I would really appreciate it! Thanks.
Sara

I also wanted to mention that the swf file uses sound. I am
reading an old book that I have on Flash and it's saying that Flash
and Shockwave Flash enter a special mode when they encounter a
stream sound in which the animation is forced to keep up with the
sound track, if the animation frames can not be drawn quickly
enough, some frames are skipped. I am also reading that the
animated gif format does not support sound. Again, the only
reference I have is for a very old version of flash, and I'm not
sure it applies to CS3. I am now just thinking that the sound may
be the issue.

Hyperlink problem when exporting to PDF

We are using Crystal Reports XI R2 and having a problem when exporting a report to PDF that contains a Hyperlink to "A File". The hyperlink works correctly when previewed inside Crystal but when it is exported to a PDF the text does not appear to show any hyperlink at all. Am I missing something or is this a bug?

Hi Brian
Please visit the following URLs that talk about the issue.
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014557&sliceId=&dialogID=25464253&stateId=1%200%2025430948
http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2014405&sliceId=&dialogID=25464259&stateId=1%200%2025430949
You can also download the CR XI R2 Service Pack 4 by using the following URL and check for the results.
- https://websmp208.sap-ag.de/bosap-supportsw
- Then choose Crystal Reports from 'Software Products' dropdownlist,XI Release 2 from 'Product Version' dropdownlist and service packs from 'Software Types' dropdownlist.

Problem when exporting audio from Premiere Pro v4.2.1 into wave 5.1 format

Hello to Adobe experts!
After installing of last updates for Adobe Premiere Pro (v4.2.1) and for Media Encoder (v4.2.0.006) the was a problem:
Now I cannot to export audio from adobe sequence into uncompressed wave format with 5.1 channels settings. Source m2ts video files in sequence are with 5.1 audio.
What I doing:
1) in Premiere I execute "File\Export\Media"
2) Export settings are:
- format: Windows Waveform
- audio codec: Ucompressed
- basic audio settings: 44100Hz, Channels: 5.1, Sample Type 16bit
3) After OK button it opens Adobe Media Encoder.
4) After pressing Start Queue in Adobe Media Encoder there is a message "Error compiling movie. Unknown error"
In earlier versions it worked fine.
Can you help me with this problem?
Alexander

Here are the options, from a sequence with 5.1 master track:
and with Surcode:
Notice that first one does only give stereo as an option. Nothing more. With Surcode it gives you 5.1 sound.

Problems when exporting to AVI, firts gave me "unknown error compiling movie" and then just exports small parts of timeline, I have to export the different parts, put it back in a timeline and then I can export it complete...it was working fine, HELP!!!

Similar Messages

Maybe you are looking for