Problems while creating the leave request via PTARQ

Hi All......
While trying to create leave request via PTARQ I am getting the following warning message
Document created with warning: HRTIM00BLPRETRO 009 Earliest recalculation for time evaluation exceeded
Please suggest what should be done.
Abhi........

It sounds like you are trying to post a leave request on a date that is too far in the past.
Check:
1. PA03, earliest retro acctg period.  The leave requst cannot be older than that data.
2.. In IT0003 for the employee involved: Check Earl.pers RA date.  Leave request cannot be older than that date.
If you want the leave request to be posted anyway, you either have to change the dates mentioned above (be careful, they are there for a reason). 
Hope this helps
Kirsten

Similar Messages

  • Can't create a leave request via ptarq

    hi all,
    i can't create neither approve any request via ptarq ?
    anyhelp would be appreciated .

    Dear Merry ,
    I had a similar problem like yours but mine was with some of the users and it was resolved by applying Sap-note 1294238
    also try check my problem desscion maybe it help you Create Leave Request In portal doesn't load  after logging in  hope it helps
    Regards.
    Ahmed Salam.

  • Problem while creating the Transport Request in BI Development.

    Dear Friends,
    We are trying to transport the objects from BW Development System to BW Production system. We are using the Path RSA1-> Modeling -> Transport Connection.
    In Transport Connection i selected grouping "Only necessary objects" and later i selected the ODS object into right side panel (Transport Area), by default it showed as $TMP package, to change the Package into our own package we clicked on Package pushutton. It popup a screen "Select Objects for Changing Package" here we selected all and clicked on OK button and it asked for the new Package name where we specified our own package name (ZBIW) and clicked on save button and it got save after changing the package name we selected all the objects and clicked on the Transport pushbutton but it did not asked for a request id and we got the following message.
    Error/Info Message:
    Edit objects separately since they belong to different original systems.
    Choose 'Display object' or 'Cancel'.
    Please give us your valuable input for our issues.
    Thanks in Advance.
    Regards,
    Akash.

    Hi,
    find the Objects for which the system is creating this error from the error messages.
    And then search for those objecs in the collected objects ,in right hand side screeb of Transport connector. you can find them two times ticked.And then remove tick mark for one .So that. you are making tick mark for only one time for those objects.
    with rgds,
    Anil Kumar Sharma .P

  • Problem while creating the Partner Address in CRM

    Hi,
       We are facing one problem while creating the new address for the Business Partner.
       When ever customer wants to change the address : we are following one process : where we are      
       using 'BAPI_BUPA_ADDRESS_ADD' functin module. Becuse of this , new addrss number will be generated for the 
      corresponding account in BUT021_FS table.But this table contains old address number as a first record, so that when ever
      we display the partner address in UI, it is displaying the old address only because first entry of the the table 'BUT021_FS'
      contains the old address number.
      Because of this , we are getting lots of complaints regarding this.
    Can you please help on this ASAP.
    Thanks & Regards
    Pradeep.

    Try BAPI_BUPA_ADDRESS_CHANGE  for address change followed by BAPI_TRANSACTION_COMMIT . It works.

  • Problem while creating the record in IT0080 from background

    Dear All,
    I have a requirement to Create the record for Maternity Leave in IT0080 from background, whenever applied from ESS.
    Once the leave gets aaproved, while posting the documents from tcode PTARQ ( Program - RPTARQPOST), in the BADI PT_ABS_REQ, in method IF_EX_PT_ABS_REQ~POST_VIA_BLOP for the implementation, I am trying to submit the program in which the actual record is created in IT0080.
    In this program through BDC i have created the BDC data and have used CALL transaction, as internally IT 2001 also needs to be updated, which gets calculated  indirectly...
    But when executed, it gives error of Employee cannot be locked... as the Document which is posted through PTARQ, have several locks... I tried to dequeue the same...
    but cannot resolve the problem...
    Secondly i tried to create the Job also... which would be executed after some time... but still its not getting updated...
    Any help... will be highly appreciated...
    Regards,
    Heena

    Hello s.s
    I'm not understand exacly what is your problem?
    Field can have both values at the same time(Time Stamp and User stamp)  only if that field calculated
    Maybe you told about two different fields?
    User stamp field return username only it's standart functionality
    Create stamp - return date/time combination
    Remote key is avialable when you repository configured to work with some remote systems
    All records from repository (LUT, taxonomy attributes ets.) you can map to corresponding Destination items
    Regards
    Kanstantsin

  • Getting error while creating Customer Invoice Request via Web Service

    Hello,
    I am trying to create customer invoice request via web service.
    But I am getting the error message "No scheme configuration found for scheme '&CIRHP&' " continuously.
    It is working fine in reference tenant. But using the same payload its giving error in another tenant.
    Can you please tell me what is the root cause for this error?
    I have included the payload used in the prototype tenant(Payload.txt) and screen shot of the error.
    Thanks and Regards,
    Sriram

    Hi,
    Check the WSDL file is wellformed or not..You can test it using tools like XML Spy.
    Might be the attribute tag is missing something..If WSDL file is correct then, create proxy by selecting the WSDL file from local machine..
    Regards,
    Sunitha

  • Subject field while creating the change request

    Hi All
    I want to populate the subject field in the change request by default.

    Hi
    The automatic population of the subject field while creating the CR through folloup transaction from Support message.
    Regards
    Kumar

  • Problem While creating the related entity DocFlowSet

    Hi,
    i am trying to create a Business Transaction and attach it to the another transaction.
    I am creating the Transaction T1 using the factory methods and I am facing issues while creating the related entity DocFlowSet to attach T1 as a follow on document to T0.
    i am using the model DocFlowSingle and passing the parameters like.
    ObjKeyA GUID of T0
    OBJTYPEA
    OBJKEYB GUID of newly created transaction T1
    OBJTYPEB
    RELKING
    RELATEDGUID: GUID of T1
    RELATIONID GUID: creating a new 22 character GUID and then assigning it
    But still I am not able to create the related entity. Can any one please help me in resolving this.
    Thanks,
    Ravi G

    Resolved by self

  • Problem while creating the ARE1

    Hi All,
    As per the client requirement, have to generate the ARE1 for the export sales process,
    In this process while creating the ARE1 (J1IA101) the BED, ECESS, SHECESS values are not displaying inthe screen, if i save without values also the Bond in not updating
    *Note: I can able to see only the ECESS% in the ARE1 Screen
    Process followed now:
    Sales Order
    Delivery
    Invoice(JEX)
    Excise Invoice(J1IIN)
    Bond creation
    ARE1 Creation
    guys, could you plz help me out in the above issues and plz let me know if any other process isthere to create the ARE1
    Otherwise plz confirm that is there any NOTE(PATCH) is require to update in SAP
    THANKS & REGARDS
    Rajasekhar

    *ISSUE has been resolved. Found the solution from the Forum,,,, Thanks to all who provided the below
    Solution as per the forum below:
    Plz do few changes and then your ARE-1 and ARE -3 both will work fine. Also the Report bond summary for ARE-1 will get updated
    Applied this note J_1I7_USEREXIT_DUTY_IN_EXPORT
    In case of ARE 3 Changes for ARE-3
    In fn module 'J_1IEX_DEFAULT_EXCISE_DUTY'
    before the call fn given below this update has initial in it convert it to 'Y'
    IF l_update_cond EQ 'Y'.
    *} REPLACE
    CALL FUNCTION 'J_1I6_DETERMINE_EXCISE_RATE'
    EXPORTING
    Go to SE 37
    and input
    FUNCTION J_1I7_USEREXIT_DUTY_IN_EXPORT.
    ""Local interface:
    *" IMPORTING
    *" REFERENCE(YVBRK) TYPE VBRK
    *" EXPORTING
    *" REFERENCE(SUPPRESS_CALCULATION) TYPE J_1IEXCHDR-STATUS
    *If you do not want the excise duty to be calculated for a particular
    *transaction then you need to mark the flag supress_calculation as 'X'
    *This flag when left blank will trigger calculation of ED during j1ii
    *When it is marked, the ED copied from billing will be left as it is
    *{ INSERT VDQK903541 1
    SUPPRESS_CALCULATION = 'X'.
    *} INSERT
    ENDFUNCTION.
    Thanks & Regards

  • Problem While creating the proxies

    Hello,
    When I am trying to create the Proxy for my Inbound Message from TCode:SPROXY, after assigning the package in the next screen it is asking to enter the "Access Key". Even if I give the correct access key it is displaying a message Invalid Entry.
    I could create reports,function module etc. without specifing the access key at all.
    Is the access key which I am suppose to give while creating proxies are different from the normal developer access key.
    Please help me in solving this problem.
    Thanks and Regards,
    G.S.Chary

    Hi Udo,
    My Package name starts with "Z" and once I selected it is asking fo Access Key. But while creating this pacakge it has never asked me and access key at all.
    Regards,
    Chary

  • Problem while creating credit memo request using BAPI

    HI,
    I am trying to create credit memo request using the BAPI_SALESDOCU_CREATEFROMDATA1..
    I am getting the error as " No customer master data is available for the customer". But the customer exists in the KNA1 table. What is the mistake i hv done.. this s my code..
    REPORT  ZSV_CREDITMEMO_TEST1.
    Data declarations.
    DATA: v_vbeln            LIKE vbak-vbeln.
    DATA: header             LIKE bapisdhead1.
    DATA: headerx            LIKE bapisdhead1x.
    DATA: item               LIKE bapisditem  OCCURS 0 WITH HEADER LINE.
    DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
    DATA: partner            LIKE bapipartnr  OCCURS 0 WITH HEADER LINE.
    DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
    DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                             WITH HEADER LINE.
    DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                             WITH HEADER LINE.
    DATA: lt_schedules_ink    TYPE STANDARD TABLE OF bapisdhead1
                             WITH HEADER LINE.
    START-OF-SELECTION.
    Header data
    Sales document type
      header-doc_type = 'G2'. 
      headerx-doc_type = 'X'.
    Sales organization
      header-sales_org = '0001'.
      headerx-sales_org = 'X'.
    Distribution channel
      header-distr_chan  = ''.
      headerx-distr_chan = 'X'.
    Division
      header-division = ''.
      headerx-division = 'X'.
      headerx-updateflag = 'I'.
    *Complete delivery
        header-COMPL_DLV = ''.
        header-COMPL_DLV = 'X'.
    Partner data
    Sold to
      partner-partn_role = 'AG'.
      partner-partn_numb = '0000C10130'.
      APPEND partner.
    Ship to
      partner-partn_role = 'WE'.
      partner-partn_numb = ''.
      APPEND partner.
    ITEM DATA
      itemx-updateflag = 'I'.
    Line item number.
      item-itm_number = '000010'.
      itemx-itm_number = 'X'.
    Material
      item-material = 'C20011'.
      itemx-material = 'X'.
    Plant
      item-plant    = ''.
      itemx-plant   = 'X'.
    Quantity
      item-target_qty = '10000'. 
      itemx-target_qty = 'X'.
    item category
      itemx-ITEM_CATEG = 'X'.
      APPEND item.
      APPEND itemx.
      Fill schedule lines
      lt_schedules_in-itm_number = '000010'.
      lt_schedules_in-sched_line = '0001'.
      lt_schedules_in-req_qty    = '10000'.
      APPEND lt_schedules_in.
      Fill schedule line flags
      lt_schedules_inx-itm_number  = '000010'.
      lt_schedules_inx-sched_line  = '0001'.
      lt_schedules_inx-updateflag  = 'X'.
      lt_schedules_inx-req_qty     = 'X'.
      APPEND lt_schedules_inx.
    Call the BAPI to create the sales order.
      CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
           EXPORTING
                sales_header_in     = header
                sales_header_inx    = headerx
           IMPORTING
                salesdocument_ex    = v_vbeln
           TABLES
                return              = return
                sales_items_in      = item
                sales_items_inx     = itemx
                sales_schedules_in  = lt_schedules_in
                sales_schedules_inx = lt_schedules_inx
                sales_partners      = partner.
    Check the return table.
      LOOP AT return WHERE type = 'E' OR type = 'A'.
        EXIT.
      ENDLOOP.
      IF sy-subrc = 0.
        WRITE: / 'Error in creating document'.
      ELSE.
    Commit the work.
        COMMIT WORK AND WAIT.
        WRITE: / 'Document ', v_vbeln, ' created'.
      ENDIF.
    can anyone tell what the error is.?

    Hi
    please look at code below code this succefully creating credit memo may some help to you
    header-doc_type = 'ZS4'.
        PERFORM get_plant.
        headerx-doc_type    = 'X'.
        header-sales_org    = wa_temp1-vkorg.
        headerx-sales_org   = 'X'.
        header-purch_no     = wa_temp1-bstnk.
        header-distr_chan   = wa_temp1-vtweg.
        headerx-distr_chan  = 'X'.
        header-division     = wa_temp1-spart.
        header-purch_no_s   = wa_temp1-bstnk.
        headerx-division    = 'X'.
        wa_partner-partn_role = 'AG'.
        wa_partner-partn_numb = wa_temp1-kunnr.
        APPEND wa_partner TO it_partner.
        wa_partner-partn_role = 'WE'.
        wa_partner-partn_numb = wa_temp1-kunnr.
        APPEND wa_partner TO it_partner.
        CLEAR: wa_partner.
        LOOP AT lt_temp2 INTO wa_temp2 WHERE kunnr = wa_temp1-kunnr.
          "AND matnr = wa_temp1-matnr.
    *wa_item-itm_number = wa_temp2-posnr .
          wa_item-material   = wa_temp2-matnr.
          wa_item-plant      = wa_temp2-werks.
          wa_item-req_qty    = wa_temp2-fkimg * 1000.
          wa_item-target_qty = wa_temp2-fkimg * 1000.
          APPEND wa_item TO it_item.
        ENDLOOP.
        CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
          EXPORTING
            order_header_in       = header
    *   WITHOUT_COMMIT            = ' '
    *   CONVERT_PARVW_AUART       = ' '
         IMPORTING
           salesdocument          = v_vbeln
    *   SOLD_TO_PARTY             =
    *   SHIP_TO_PARTY             =
    *   BILLING_PARTY             =
           return                 = return
          TABLES
           order_items_in         = it_item
           order_partners         = it_partner.
        IF v_vbeln <> space.
          wa_vbeln-vbeln = v_vbeln.
          APPEND wa_vbeln TO lt_vbeln.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              wait = 'X'.
          HIDE wa_vbeln-vbeln.
          CLEAR: wa_partner,header,v_vbeln, wa_temp2.
          REFRESH: it_partner,it_item.
        ELSE.
    *    LOOP AT return .
          it_error-srno = idx.
          it_error-err_msg = return-message.
          APPEND it_error.
    *    ENDLOOP.
        ENDIF.
        idx = idx + 1.
      ENDLOOP.
    Regards

  • Mapping Problem while creating the DP through utils (dpcreate.bat)

    I am exploring on the command line and utils to create build and deploy the project in jcaps 5.1.3.
    Used dpcreate.bat (from the repository utils) to create the deployment profile and automapping the components.
    In a particular scenario when i have two web service invocation in a single project,I have two SOAP webservice external system clients in the environment.
    when i use the dpcreate util, the two web services are getting mapped into a single SOAP webservice external system client.
    However, I want them to be getting mapped into two different SOAP webservice external system clients.
    ------------------------------------------------THE OUTPUT OF THE COMMAND LINE--------------------------------------------
    C:\JCAPS\repository\util>dpcreate.bat Administrator STC "test1" "envTest1" "dpTe
    st1" "test1/cmTest1"
    URL: http://127.0.0.1:12000/RepositoryName
    User Name: Administrator
    Project Path: test1
    Environment Path: envTest1
    Deployment Name: dpTest1
    CME List: test1/cmTest1
    CME Exclude List: none
    Mapping File Name: C:/JCAPS/repository/util/dpmapping.properties
    Recreate DP if found: false
    Trying to connect to http://127.0.0.1:12000/RepositoryName ...
    Total time to load resource is : 8845
    Connected to http://127.0.0.1:12000/RepositoryName
    Deployment Profile dpTest1 has been created
    Deployment Profile dpTest1 has been added to project named test1
    Processing mappings for 4 deployables ...
    Deployable name CMap1_BusinessProcess11 mapped to system IntegrationSvr1
    Deployable name CMap1_BusinessProcess11_outq mapped to system SBJMSIQMgr1
    Deployable name CMap1_BusinessProcess11_Web Service Application1 mapped to system
    CLIENT1
    Deployable name CMap1_BusinessProcess11_Web Service Application2 mapped to system
    CLIENT1
    Saving changes to workspace
    Result:
    Successful. Deployed: 4, Undeployed: 0
    Disconnecting from http://127.0.0.1:12000/RepositoryName
    Can someone please guide me how to map these into different clients ? Is there any property file which I can modify ?
    Thanks in Advance
    Sushant

    You will have dpmapping.properties file which can tell you this. Again in dpcreate you need to have one more option "recreate" which can help re-creating the Deployment profile.
    Change your dpcreate.bat adding the recreate option and try.

  • Problem while Creating the LEAD through WEB UI

    Hi,
    I am trying to create Lead from WEB UI. But, it is asking Sales Rep., but I am not able to find that field in the WEB UI.
    And In the Status field, I am able to See only 2 statuses, "Open" and "In Process".  I am not able to see any other status like "Rejected By Sales" and "Closed".
    Can you please let me know the reason for this. Do we need to do any configuration or Coding Related , to achieve this.
    Thanks,
    Sandeep

    Hi,
    You can enter partners (Sales Rep) in Lead in assignment block Parties involved , for additional status check your status profile attached to transaction lead, also check lowest and highest value in status profile.
    Regards,
    Dipesh.

  • Quantity problem while creating the sales order

    Dear Experts,
    Need your inputs for the following case,
    the sales order has to accept only quantity 1, if more than 1 qty it has to show error message.
    how to control this,as i know not through incompletion log.
    Please let us know your valuable suggestions urgently.
    Thanks
    Raju

    Hi
    J Raju
    Go to SPRO
    Sales and Distribution- --- Sales Documents --  Sales Document Item - -- - Sales Document Item--Select yr sales doc item category view the same there u will find -- general control -- put tick on order qty=1
    Hope this will help you.
    Thx

  • Doubt in creating the transport request for "STANDARD TEXT""

    HI ALL,
    i used the standard text in scripts but i am getting the problem while creating the transport request for that,
    i am not able to create the transport request for that,if anybody knows plzlet me know,
    this is very urgent,
    thanks and regards,
    saikrishna.

    HI SURESH ,
    THANKS FOR UR IMMEDIATE REPLY ,
    i executed that report in that i have given
    Name of Correction : ZREPST
    Textkey-object:
    Text key name:
    Text key - ID: ST
    Text key - language :EN
    Here Textkey-object,Text key name
    wat i have to ,give after that ,can i execute that ,
    will it create the request.
    plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
    plz let me know immediately,
    thanks and regards,
    saikrishna.

Maybe you are looking for

  • My iphone won't allow me to download new apps

    I have never had this issue before. It tells me I can retry. I am downloading apps directly on my phone. I was able to last night. It is not saying I need to reconnect to the internet but I am wondering if this is because of a bad internet connection

  • I am experiencing two problems with iTunes on my iPhone 5s.

    I am experiencing two problems with iTunes on my iPhone 5s. Issue 1: iTunes Match Some song playback is merging songs. I select "Song A" to be played and midway through the song it begins playing "Song B" however when I look at my phone it indicates

  • My iPod Shuffle is not being recognized.

    Please help! I recieved my iPod in September 2005. It has been working perfectly fine until this month. I've been trying to add more songs to my iPod. I connected my shuffle to the USB port, and all I am recieving is my iPod blinking orange. I have t

  • GL assignment for Account key in Pricing

    Experts, Where we will assign the GL account for Account key maintained against condition type in Pricing Procedure.

  • OAS 10.1.2.0.2 - How configure PHP with database access

    I Installed OAS 10.1.2.0.2 on SuSe 9.3. I put in $ORACLE_HOME/Apache/Apache/htdocs a php pages for test if this OAS versión supported php. The test is ok, this versión support PHP, but not are configured to PHP with database access. My question is: H