Problems with a non-BT product or service

I have just contacted BT as my down IP Profile has become 30% less than it should be over an approximately 6 month period.  This is despite the fact that my line is surprising stable with an average up time of around 14 days and the main disconnection being  BT induced profile resets.
I have had this issue three times before. The solution is 1 to 3 Openreach Engineer visits that find no fault and end up with a line reset to up the profile.
This time the Indian call centre rang me, tested the line and found no fault  (as expected). They said because of this they could not do anything and suggested I contacted second line support.
I then received  the following email 
"Problems with a non-BT product or service
Hi,
You recently contacted us regarding a non-BT product or service. We confirmed that your BT Broadband service and equipment were working ok but we were unable to help you with your product/service as it's non-BT.
We recommend that you check your user guide or contact your manufacturer regarding the product/service. Before you do that, check out these links below as they may help you further.
Happy to pay for technical support from BT?
BT has a team of technical experts. For a monthly fee they can help you with a range of problems. Go to www.bt.com/techexperts to find out more and sign up.
I am using a BT supplied OpenReach modem and HomeHub 4 A so other than devices connected to the HH4 all kit is BT supplied.
Can I have some (preferably Moderator) help on this please ?
Solved!
Go to Solution.

DavidM wrote:
Hi vofsanity2,
Thanks for posting. I can look into this for you. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
I am pleased to say that thanks to moderator intervention I was contacted by Kevin who arranged for an OR Engineer visit.
As expected no fault was found and after a line reset to restore my profile to what it should be (actually slightly better) my 30% drop was corrected.
It is fairly clear that if you have FTTC and a connection to the cabinet of 1200-1400metres then the DLM is happy to reduce your line speed but reluctant (if at all)  to increase it. This means your profile decreases over time and has to have a manual reset.
The worrying development this time is that now when the helpdesk tests your line and finds line speed and profile match they assume you have  a problem with a non-BT product or service where as previously they accepted that a 30% drop in profile was a BT Fault. 

Similar Messages

  • Problem with the Non-English Characters

    Hello,
    I have been using Adobe Illustrator  but I have a huge problem with the non-english characters with Standart Fonts. With the Professional font's I have no problem with them. But when I'm using any standart font in font folio library I cannot type any "ğ-İ-ş". I can add those letters in fontlab with the glyphs (scedilla, idotaccent, gbreve). Most of the fonts have those letters already prepeared so I dont even have to redraw. But I can't add those glyph to every single font because I dont have that kind of time and patience. Is there any better solution for this? Or is there any font folio pack that all fonts are PRO.
    I'm looking forward for your answers
    Thanks.

    Joel wrote: I'm told that this is the exact difference between Adobe's Standard and Pro fonts — the Pro fonts have additional glyphs, including those necessary for extended Latin script.
    Exactly. The Pro fonts have at a minimum the Adobe Western 3 character set, which is essentially western European + Adobe CE.
    > Standard fonts just have the basic English character set, with maybe a bit of help for Spanish and French.
    A lot more than that!
    > You're doing Turkish, right? Adobe's coverage for Turkish in its fonts is not great - some of the Pro fonts have Turkish coverage, many do not.
    This is false. Every single Adobe Pro font supports Turkish.
    To be clear:
    All Adobe Standard fonts support the following languages: Afrikaans, Basque, Breton, Catalan, Danish, Dutch, English, Finnish, French, Gaelic, German, Icelandic, Indonesian, Irish, Italian, Norwegian, Portuguese, Sami, Spanish, Swahili and Swedish.
    Adobe Pro fonts support those languages, plus AT LEAST: Croatian, Czech, Estonian, Hungarian, Latvian, Lithuanian, Polish, Romanian, Serbian (Latin), Slovak, Slovenian and Turkish. Some Pro fonts have more language support than this, such as Greek and/or Cyrillic, and additional extended Latin.
    See: http://www.adobe.com/type/browser/info/charsets.html
    Cheers,
    T

  • I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

    I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?

    No - restrictions are not on...
    and  under privacy>location Services - just like before - I can´t change it here

  • Problem with cheque printing in production Server Tcode - FBZ5

    Hi
    Cheque Printing using SAPScript with TCODE FBZ5.
    I had a problem with cheque printing in production Server. TCODE - FBZ5
    It is working fine in Development Server with proper alligned data but not coming alligned data in production server. I compared, dubugged and checked the allignment...there is no difference I found.
    Could you please let me know, where the problem is occuring.
    The amount is not coming properly and coming out of the box.....but it is coming properly in development server.
    Sekhar

    Hi,
    For Amount field you must print like &amount(C)&. And it must be printer settings only. Because i gor same like this error while printing cheque. at that time Basis team had made the changes in printer settings.

  • Problems with deep request structure in web service

    I'm having problems when trying to consume an Enterprise Service-like web service in my Web Dynpro application. The web service FindXByElements has a request-structure as follows:
    XByElementsQuery
    -ProcessingConditions
    -QueryHitsMaximumNumberValue
    -QueryHitsUnlimitedIndicator
    -XSelectionByElements
    -ID
    -Year
    Regarding the structures on level two, the structure ProcessingConditions are of the global data type "WITHOUT_LASTRETURNED_QueryProcessingConditions" and are therefore typed. The structure XSelectionByElements on the other hand are just a "level" in the request structure and are therefore not typed. Both structures have occurrence 1 so they have to be filled with input data.
    The code in wdDoInit in the Component Controller looks like this:
    QueryXInModel model = new QueryXInModel();
    wdContext.nodeRequest_FindXByElements().bind(wdContext.createRequest_FindXByElementsElement(new Request_FindXByElements(model)));
    wdContext.currentRequest_FindXByElementsElement().modelObject().setXByElementsQuery(new XByElementsQuery_Sync(model));
    //Processing structure
    wdContext.currentXByElementsQueryElement().modelObject().setProcessingConditions(new WITHOUT_LASTRETURNED_QueryProcessingConditions(model));
    //Selection structure
    wdContext.currentXByElementsQueryElement().modelObject().setXSelectionByElements(new XSelectionByElements(model));
    The last row generates the following exception:
    java.lang.IllegalArgumentException: Cannot perform write operation 'setRelatedModelObject' on target role: Class 'XSelectionByElements' is not compatible to class '$002fWsdlDefinitions$002fWsdlTypes$002fXsdSchema$002fXsdComplexType$005b3$005d$002fXsdSequence$002fXsdElement$005b2$005d$002fXsdComplexType' of target role 'XSelectionByElements' in model class 'XByElementsQuery_Sync'
    There seems to be a problem to bind a non-typed structure element to a context node since the processing structure is working fine but the selection structure are not.
    What am I doing wrong, anyone got any clues?
    /Oskar

    Hi
    QueryXInModel model = new QueryXInModel();
    wdContext.nodeRequest_FindXByElements().bind(wdContext.createRequest_FindXByElementsElement(new Request_FindXByElements(model)));
    wdContext.currentRequest_FindXByElementsElement().modelObject().setXByElementsQuery(new XByElementsQuery_Sync(model));
    //Processing structure
    wdContext.currentXByElementsQueryElement().modelObject().setProcessingConditions(new WITHOUT_LASTRETURNED_QueryProcessingConditions(model));
    //Selection structure
    wdContext.currentXByElementsQueryElement().modelObject().setXSelectionByElements(new XSelectionByElements(model));
    XByElementsQuery
    ProcessingConditions
    QueryHitsMaximumNumberValue
    QueryHitsUnlimitedIndicator
    XSelectionByElements
    ID
    Year
    as
              QueryXInModel model = new QueryXInModel();
               Request_FindXByElement  request = new Requst_FindXByElement();
                ProcessCondition   processCond  = new  ProcessCondition(model);
                QueryHitsMaximumNumberValue  qhMaxNumValues = QueryHitsMaximumNumberValue(model);
          QueryHitsUnlimitedIndicator  qhUnLimind = new QueryHitsUnlimitedIndicator(model);
            XSelectionByElements  selecByEle = new XSelectionByElements(model);
                     processCond.set....();                         
                     qhMaxNumValues .set...();
               and so on
                    request.set....();
    wdcontext.nodeReqestFindX..bind(request);
      in the above during the values you will automatically get the set values .

  • Major problems with BT infinity and now no service...

    Hi all,
    I've been a BT customer for a while. I moved from Virgin Media and found BT to be fantastic. It was fast, reliable, decently priced and I was very satisifed as a customer. I used to recommend them to everyone. Sadly I am currently experiencing the worst of BT. It's not their products letting me down, it's a problem with customer services.
    I had BT Infinity 2, Youview and a telephone package at home. I paid for my line rental up front and all was well. I was about to move home and so I contacted BT in plenty of time to advise of this. The new place didn't have a phone line but they offered to wave connection charges if I signed up to a new contract. No issues and I was happy.
    Plans changed and I ended up not moving house. I called BT to cancel my home move. They understood fully and said that despite the service being stopped at my home they would reinstate it and cancel the installation at the other address. All good so far.
    A day or so later I had a phone line, with a different phone number sadly, and BT Infinity back on at my current home address. Brilliant! I was happy.
    A few days passed and I received a call from a BT engineer. He was outside the address I was at one point going to be moving to. I explained I didn't want the service installing there because I had not moved afterall and that BT were aware of this. He apologised and said he'd sort it. Sadly a few days later another engineer called from outside the address again. This happened a total of THREE times - so anyone waiting a while for BT engineers to install or fix your service, perhaps this is a reason as to why you're waiting so long with three cancelled appointments going to waste!
    Finally I stopped getting the calls. I was told by customer services that my phone number would change back to my original number in a few days and that I could sit back and relax and nothing else would need doin. Lovely. Unfortunately that wasn't the case.
    A week or so later the Infinity broadband stopped working.
    I checked with BT, they told me that I had not had Infinity broadband since the cancelled move. I told them I had and that it was sorted by one of their overseas call centres, but they insisted I hadn't had it and that whatever this person overseas had done it wasn't right.
    At the time of having the broadband it was coming through the Infinity port, in to an Infinity modem and in to the homehub 3 via the Infinity port. On top of that I was getting around 35-37Mb/s which is about right for the area I live in for Infinity. And finally, a few IP and speed checks at the time had confirmed I was indeed on BT Infinity. Despite all this the lady on the phone insisted it wasn't possible for this to have happened and I must have been mistaken!! Look at the facts, they speak for themselves.
    BT then advised me that they had to now cancel all my services which would take at least 24 hours. Then I'd have to wait until Monday because nothing is done over the weekend, for a new order to be placed. I would receive a call on Monday, which to be fair they made and kept their word.
    Now I'm in the situation where BT are sending out an engineer to install BT ADSL to my address. This will be a temporary thing for a week or so while they arrange to fit BT Infinity to my address! I pointed out this was a pointless exervise as my house has Infinity but they just turned it off recently after it working for a week or so. They ignored this until I pointed out I was using Infinity equipment and not ADSL equipment. Now they've said they'll send Microfilters to my address and I can remove the Infinity modem until they reinstall Infinity.
    Add to the above that at one point I was also without a phone for a while and spent around 2 hours on hold in total on my mobile phone, which I get charged for, and you can see why I am quickly losing faith in BT. They've managed to turn me from a customer who loved their products to one who dispairs at the thought of having to spend yet more time on the phone to deal with a problem that BT actually appear to have created by not knowing what each department has done.
    Each call I hear terms such as 'off line team' 'sales team' ' new order team' and I keep getting passed to different departments. I had at one point a call from BT on my mobile while I was on my landline and the lady on the mobile told me to hang up on the lady on the landline! They can't even be civil with each other it seems!
    So here I am, stuck without internet and with a phone number that I don't recognise. My original number rings, but not at my house. Anyone calling me never gets an answer, where ever it actually rings.
    Today I was told this whole problem is going to take yet another week, until at least a week today! And even then the solution at that point will be a temporary ADSL connection, not the Infinity product that I pay for.
    The overseas call centre appeared to have it all sorted. Infinity was back, my phone was meant to change in a day or two. Then the UK team got hold of it, cancelled Infinity, ordered ADSL, turned it all off for at least two weeks and apologised a few times.
    Although people are polite on the phone and I respect they are trying to help individually, nobody has taken ownership of my problem. I am passed from team to team, churned out the same lines on each follow up call and each time the delay gets longer and longer without actually getting the service I'm meant to have. This is appauling customer service.
    Can someone at BT PLEASE sort out my account and turn on my services? It appears that everything physically works, but people keep turning things off for some reason and then doubting me when I say it was working.

    Hi pebbleheed,
    Welcome to the community and thanks for posting!  Your post doesn't make great reading to be perfectly honest! 
    I can help sort everything out from here.  To get in touch, click on my username and under the section "about me" you'll see the link to "contact the mods".
    Please include a link to this thread when you complete the form and whenever we've received your details we'll take it from there.
    Thanks a million,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Problem with final issue of production order components

    Hi Gurus,
    Currently we have a problem with the production order components.
    The problem is that, we needed some components (components which are categorized as dangerous goods) deleted from the production orders.
    So we tried to manually tick the final issue indicator and save the production order. However, the reservations reappeared after the MRP Run.
    Hence, we then tried to delete the component line items, but then again the reservations reappeared.
    Also, since the components are externally procured materials, new purchase requisitions are generated by MRP for these materials.
    Kindly request your help on the same.
    Thanks and Regards,
    Sanju

    Hi Kiran,
    Please find the screenshots of MD04 for the header and component in the attachment:
    MD04 for Header:
    MD04 for Component:
    For the header material no entry is available for 07.01.2015 as the status is delivered for the production order of the header material.
    Kindly help me with the same.
    Thanks,
    Sanju

  • Problem with sun outlook connector,  Microsoft LDAP services

    Dear All
    I have big problem with sun outlook connector and I can find any way to fix the problem,
    I am using sun java system connector deployment to create installation script for my clients.
    in the tool I have specify the location of Microsoft LDAP services, I am using outlook 2003 and sun say this option is not needed for outlook 2003, if I try to create the script and run the script on target client I will receive below error,
    I tried the office CD-ROM as path for LDAP services but the outlook connector says there is no LDAP services on the CD and I receive same error,
    19:02:29 [5365] Outlook version is 11.0.5608.0.
    19:02:29 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
    19:02:29 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
    19:02:31 [5362] Checking Windows version.
    19:02:31 [5363] Windows version is 5.1.
    19:02:31 [5364] Checking Outlook version.
    19:02:31 [5509] Checking default mail client.
    19:02:31 [5508] Default mail client is 'Microsoft Outlook'.
    19:02:31 [5178] Verifying that Outlook is not running.
    19:02:31 [5179] Trying to login to shared session.
    19:02:31 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
    19:02:32 [5502] Upgrading the Sun Java System MAPI Service Providers.
    19:02:40 [5370] Finished installing Sun Java System MAPI Service Providers.
    19:02:40 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
    19:02:40 [5367] Sun Java System MAPI Service Providers are installed.
    19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
    19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
    19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
    19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
    19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
    19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
    19:02:41 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
    Best regards
    Mo

    This is likely to depend on the version of the OC you have. The released one isn't supposed to work with Outlook 2003. Please contact Tech Support for the latest version and help.

  • Problem with 'install credential for Adobe Document Services'

    Hi Folks,
      I am trying to install credential for Adobe Document Services but I have got problem with some facts that are explained in tutorial how to install credential.
      1. I do not have directory persistentcom.adobe~Trust.. under my directory server0
      2. where to find 'filename.pfx'?
      3. I do not have Document Services Configuration in my visual Administration tool
      The tutorial that I am trying to do is located on <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/installing%20adobe%20document%20services%20credentials.pdf">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/installing%20adobe%20document%20services%20credentials.pdf</a>
      So if someone can help me how to overcome this problem I would be very thankful.
       Kind Regards to all.
    Aleksandar

    Hi Sharadha,
    You could go to SAP Software Distribution Center with in SAP Market place . You could search for adobe ther in S/W search . It will list all the available Aobe designer. Latest version is ADOBE LIVECYCLE DESIGNER 7.1   .
    regards

  • Problem with file receiving through abap web service

    Hi experts,
    I need to created web service for import file from .NET application into SAP.
    ABAP function expect hexadecimal string (same as GUI_UPLOAD / GUI_DOWNLOAD) but hexadecimal string from C# is too long (double longer), and I have no idea how to convert it. Also there is a problem with code page...
    Is there some better way to do this? Any idea is welcome!

    Hi Nemanja,
    Please bear in mind that your SAP system is based on UTF-8 encoding. Since you have the xstring length doubled, most probably your sender system uses UTF-16 encoding. So what you need to do is change the encoding used by your .NET application when sending the data to SAP.
    Alternatively, you can try using XSL Transformations in ABAP to have the input data converted from UTF-16-encoded xstring to ABAP structures. You can find a little example in this thread: ABAP data to XML conv with UTF-8 encoding and custom namespace. The point is to start your XSLT with the following: <?xml version="1.0" encoding="utf-16"?>.
    Hope this helps,
    Greg

  • Several Problems with MBP - How to get it serviced in UK?

    Hi,
    I bought my Macbook Pro in April. I didn't get the extra 3 year Apple Care as I didn't think it was worth it.
    When the MPB arrived, my first issue was noticeable instantly. In the top left hand corner of the screen, there are several pixels that seem to flicker. Now, with them being in the very top corner (right on the edge) I decided to ignore them. Also I was hooking the computer up to an external display and would use it with that pretty much all the time so It wasnt a biggie.
    Just outside my 3 month complimentary Apple Care, a problem with what sounds like one of the fans arose. When the CPU was under load and the fans sped up, a rather irritating noise was coming from the computer. The noise sounds like one of the fans is catching something, and it produces a noise that resembles a hedge strimmer or some other garden tool. The noise gets louder as the fans speed up. Its very irritating and is not a normal operation sound - and i fear that the fan will eventually fail completely and then i'll have problems.
    My third issue is the whine - which I understand Apple are solving by replacing the Logic Boards on affected systems?
    So - about a month ago I contacted Apple support. The guy I spoke to was obviously from India and spoke bad English. I explained my issues - and he gave me three options to solve the problems.
    1. Lay out £279 for Apple Care
    2. Pay £35 for Telephone Support
    3. Take it to an Apple Store to get looked at.
    The first option is a no go. I refuse to pay that amount of money. The second option, what use is that to me? He would take me through telephone support troubleshooting and come to the conclusion that what I told him is right and that they are all hardware faults. Third option, the Nearest Apple Store to me is 40miles away. Over an hours drive. I would need to take it in there, then leave it, and go back and collect it. This really is a pain in the *** because I do not drive and I work Monday-Friday 8-5.
    Now, is there no way that I can just get Apple to send me a container to send my MBP back to them in the mail and then them to send it back? I cannot believe that this is not the case.
    I am in the UK by the way.
    Any help appreciated.
    Thanks

    apple is supposed to be able to deliver boxes to be sent to the repair depot i believe, i doubt the UK is left in the dark on this issue. any problems you have with your MBP should never be ignored, since its likely they could get much much worse. regardless of whether or not your phone support is expired, your warranty is still valid, and you can arrange a pickup if you feel travelling all the way to your nearest apple dealer is too inconvenient. they cant refuse pick up service, because thats one of the things promised to you by apple.
    one thing to note, in the time it takes for apple to repair your unit, they extend the warranty by that much time. i checked in the warranty booklet that came with my computer.

  • Problem with imessage "non distribué"

    hello
    I have a probleme with imessage,when i send a message it says "non distribué"

    http://support.apple.com/kb/ts2755

  • Problem with outlook connector LDAP Directory MAPI Service Provider is not

    Hi,
    I have very basic problem with sun outlook connector client.
    I am using sun java system connector deployment tools to create client installation script, on first page I have to supply the location for web publisher and Microsoft LDAP service, I can find web publisher and I don't have any clue about location of LDAP services and without this my client instaltion script keep failing with following error.
    The Microsoft LDAP Directory MAPI Service Provider is not installed.
    --- 2006/09/25 14:14 ---
    14:14:25 [5365] Outlook version is 11.0.5608.0.
    14:14:25 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
    14:14:25 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
    14:14:26 [5362] Checking Windows version.
    14:14:26 [5363] Windows version is 5.1.
    14:14:26 [5364] Checking Outlook version.
    14:14:26 [5509] Checking default mail client.
    14:14:26 [5508] Default mail client is 'Microsoft Outlook'.
    14:14:26 [5178] Verifying that Outlook is not running.
    14:14:26 [5179] Trying to login to shared session.
    14:14:26 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
    14:14:28 [5502] Upgrading the Sun Java System MAPI Service Providers.
    14:14:38 [5370] Finished installing Sun Java System MAPI Service Providers.
    14:14:38 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
    14:14:38 [5367] Sun Java System MAPI Service Providers are installed.
    14:14:38 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
    14:14:38 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
    14:14:38 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
    14:14:38 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
    14:14:38 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
    14:14:38 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
    14:14:38 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
    Thank you for your help.
    Best regards
    Mo

    Hi,
    If memory serves, Outlook XP offered the ability to set what address-book connectors were installed, one of which was LDAP (by default enabled). It may be a similar situation with Outlook 2003 (which I assume you are using based on the version number in the debug logs). Try using the Office '03 install CD and see if you can find the LDAP addressbook option and install it.
    Regards,
    Shane.

  • Problems with using non usa keyboard (Mac OS X 10.6.7)

    Hi,
    I have MacBook Pro, (Mac OS X version 10.6.7), slovenian keyboard and when i type in Code View or Design View one of slovenian characters (š, č, ć , đ, ž) it is not written correctly. They are all written correctly if i for example write them in Find Window (Edit --> Find and Replace) etc. This is extremly annoying and i don't know what to do. I don't have similar problem with any of other mac programs only with macromedia ones. Any suggestions what can i do?
    Thank you in advance for any answers.

    Is the language (regional time zones and languages) correctly set?  If not then you need to make sure it is Slovenian to matcvh your keyboard.
    It is my experience that you can't mix and match the keyboards.  For example, you can't use US standard Keyboard on a UK set system because the currency and date formats are all different in these two countries and so the pound sign £ and # will interefere with your work.  This is just one example but I am sure there are many.  The puctuation marks are all mixed up etc etc.
    hth

  • Problems with Internetstick CS-10 and "Data Servic...

    Hi,
    I have problems with my USB-Stick CS-10 with MultiSim-Card. MultiSim supports simultanious opereation, when Stick is connected to the PC/Notbook an outgoing call from my mobile is possible an incoming is rejected after the first dialtone. I found in the www some hints to change the mode with at-commands in hyperterminal, I can connect the stick with hyperterminal and for example the command to check the manufactor "ati" is working and sending an "at" is answered by "OK". But the commands like "enter at_odo?" to check the status and the others to change the status are not working for the cs-10. Have you some hints to solve the problem.
    Thanks in advance
    yours Hans

    HI,
    we have seen that there might be some issue with MultiSim and working on that issue.
    In meantime you might check with
    AT%ICSCALL=1,0 command. IN most cases this worked
    Br, Oliver

Maybe you are looking for