Problems with a table in PDF`S footer

Dear sirs,
We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
We have no problems with the table included in the main body
In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
May you help us to solve our problem?
Thanks in advance your help.
Edited by: emgaitan on Mar 16, 2010 2:18 PM

Wardell,
Check the data in RSA3 for the extractor that you use to bring data .
You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
Let me know if you need anything else.
Thanks
Ravi Thothadri
[email protected]

Similar Messages

Facing problem with logo in the PDF attachment when sending mail...

hi friends,
i'm facing problem with logo in the PDF attachment to the mail.
my requirement:
1. enter spool number and mail id in the selection screen.
process:
1. now the program will fetch the spool data and converts it to PDF.
2. but when i'm trying to send mail with this PDF as attachment.
when i open the PDF file from the mail, logo is not coming properly (looks disturbed).
can anyone help me how to resolve this issue...
thanks in advance, murashali.

hi dinakar, thanks for your mail...
logo looks good in spool/script/smartform.
even it look good when i download this spool to pdf and to the presentation server as pdf file.
i'm using CONVERT_OTFSPOOLJOB_2_PDF.
when i used CONVERT_ABAPSPOOLJOB_2_PDF, is gives a msg - 'spool number not found'.
here i'm using folloing code to pass pdf to the function module: SO_NEW_DOCUMENT_ATT_SEND_API1.
code:
Transfer the 132-long strings to 255-long strings
lt_mtab_pdf[] = pdf[].
LOOP AT lt_mtab_pdf INTO lwa_mtab_pdf.
    TRANSLATE lwa_mtab_pdf USING ' ~'.
    CONCATENATE lv_gd_buffer lwa_mtab_pdf INTO lv_gd_buffer.
    CLEAR lwa_mtab_pdf.
ENDLOOP.
TRANSLATE lv_gd_buffer USING '~ '.
DO.
    lwa_mess_att = lv_gd_buffer.
    APPEND lwa_mess_att TO lt_mess_att.
    CLEAR lwa_mess_att.
    SHIFT lv_gd_buffer LEFT BY 255 PLACES.
    IF lv_gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
NOTE: problem i believe is with ''. i'm getting this tilt symbol () in my pdf internal table. here in the above code the line   TRANSLATE lv_gd_buffer USING '~ ' is changing the existing tilt to space. so my logo is getting disturbed.
even i tried with REPLACE this tilt with other char, but it doent work.
can you give any idea...

Problem with opening some of PDFs in Photoshop CS6.

Hi, I have a problem with opening some of PDFs in Photoshop CS6. It is said: it isn't possible to carry out an order since the module of the file format cannot analyse this file

Don’t know if Reader has this, too, but in Acrobat one can check under Document Properties.
I can convert and place the file in Photoshop CS6.
I would recommend trying the usual trouble-shooting routines and if nothing helps un-installing, running the Cleaner and re-installing Photoshop. (After making sure all customized presets like Actions, Patterns, Brushes etc. have been saved to s secure location.)
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Problem with a table control

Hi gurus,
I´ve a problem with a table control. It has 3 columns which one is a checkbox.
I can fill all fields but in the moment I mark the checkbox this line must be unwritable. How can I do it?
Thanks for all
Dani

Assign a function code to the checkbox column....
so when u check / uncheck any entry, PAI + PBO will be triggered....
In the PBO during the loop of table control, check the checkbox field value. if it is 'X', make the row readonly
by looping at screen and setting screen-input = 0 for rest of the columns.
like ...
LOOP AT tc_itab
       WITH CONTROL tc_test
       CURSOR tc_test-current_line.
   module set_row_readonly. " loop at screen and set input = '0' if checkbox is checked...
ENDLOOP.

Problem with maintain table views SM30 Transaction

Hello All,
i have a problem with the table maintenance view SM30, it doesn't permit me to modify the rows in the table.
we have added a field into the table and when i tried to change the table view from menu: Utilities ==> table maintenance generator==> change the system propose me a message that the screen 0001 will be deleted and recreated...but the system has deleted the screen and doesn't recreate it...in somewehere on internet we find that we should use the transaction SE55 menu:
Environment==> modification ==> Maintenance screen ==> button Layout which open the tool Screen Painter and from that we have created our screen with 4 fields of our table...our result that the screen is created and i can see it from the SM30 transaction but i can't insert rows in the table...when i try to go to maintain table: menu: Utilities ==> Table maintenance generator to try if i can modify something the system give me a message: "set the compare flag dialog ZIV_DP_PLCHAR_LA"
the ZIV_DP_PLCHAR_LA is the name of my table...
can you give me some advices please how should i do to fix this problem to insert rows in table throughout the transaction
SM30 "maintain table views: initial screen"
if i want to delete the screen from the SE55 transaction to recreate it newly what should i do to take care about some options
to have a new screen?
thanks for all
Bilal

Hi
First delete the old table maintainence generator.
Now Recreate the screen and your table is good to go..
These error messages come when we add new fields and different version of the table maintainence generator in database.

Problem with Pivot Table with Graph: Line Bar Combo

Hello people!
I have a problem with pivot table and line bar combo (all in the same view (pivot table))
I have some measures and one dimension in my report.
--------------measure1---measure2---measure3
Dim A.1
Dim A.2
Dim A.3
If I choose my graph line bar combo automatically choose "line" measure 3 (last measure in "Show Controls"). How can I do if I want my measure1 for line and I don't want modify my pivot table?
Thank you very much!

Ok, I'll explain my problem again. In my pivot table I add graph vision and I want in the same view (Pivot table). My graph is "Line Bar Combo" and I don't know how but the last of my measures belongs to right AXIS, if I change order of my measures I can see in my graph the measure that I want in my right axis BUT also it changes the order of my pivot table.
This is my problem. I think that I can do that with different views but I lose my selector view to view graphic and my pivot table at the same time.

Problem with truncate table in procedure ora -00054

hi do anybody know where is mistake ???
the procedure has problem with truncate table
ora - 00054: resource busy and acquire with NOWAIT specified
ora - 06512 at "POVAPSYS.HMAN_P_REFRESH", line 6
ora - 06512 at "POVAPSYS.POVAPSYS", line 6
ora - 06512 at line 1
this is my procedure....
AS
BEGIN
execute immediate 'TRUNCATE TABLE hman_t_max';
INSERT INTO hman_t_max SELECT * FROM hman_v_max;
COMMIT;
END;

2.MAKE SURE THAT OTHER THAN YOU ANYBODY IS TRYING TO
COMPILE AND RUN THE PROCEDUREShould he make sure that anybody is running the procedure?
3.MAKE SURE THAT ANY PARALLEL QUERY IS RUNNING IN THE
SERVER SIDE,THATS KEEPS THE RESOURCE BUSYShould he make sure any parallel query is running in the server side to keep the resource busy?
Gita,
I COULDN'T RESIST HAVING ONE SUGGESTION FOR YOU. Please look at the impact of your English in the reply before posting. Check if that sends reverse message!
Cheers
Sarma.

Problems with partition tables

Hi all,
I've got some problems with partition tables. The script at the bottom run but when I wanna insert some values it returns me an error
(ORA-06550: line 1, column 30: PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored)
and I can't understand why!
There's something incorrect in the script or not?
Please help me
Thanks in advance
Steve
CREATE TABLE TW_E_CUSTOMER_UNIFIED
ID_CUSTOMER_UNIFIED VARCHAR2 (27) NOT NULL ,
START_VALIDITY_DATE DATE NOT NULL ,
END_VALIDITY_DATE DATE ,
CUSTOMER_STATUS VARCHAR2 (255)
PARTITION BY RANGE (START_VALIDITY_DATE)
SUBPARTITION BY LIST (END_VALIDITY_DATE)
PARTITION M200909 VALUES LESS THAN (TO_DATE('20091001','YYYYMMDD'))
(SUBPARTITION M200909_N VALUES (NULL), SUBPARTITION M200909_NN VALUES (DEFAULT)),
PARTITION M200910 VALUES LESS THAN (TO_DATE('20091101','YYYYMMDD'))
(SUBPARTITION M200910_N VALUES (NULL), SUBPARTITION M200910_NN VALUES (DEFAULT)),
PARTITION M200911 VALUES LESS THAN (TO_DATE('20091201','YYYYMMDD'))
(SUBPARTITION M200911_N VALUES (NULL), SUBPARTITION M200911_NN VALUES (DEFAULT)),
PARTITION M200912 VALUES LESS THAN (TO_DATE('20100101','YYYYMMDD'))
(SUBPARTITION M200912_N VALUES (NULL), SUBPARTITION M200912_NN VALUES (DEFAULT)),
PARTITION M201001 VALUES LESS THAN (TO_DATE('20100201','YYYYMMDD'))
(SUBPARTITION M201001_N VALUES (NULL), SUBPARTITION M201001_NN VALUES (DEFAULT)),
PARTITION M201002 VALUES LESS THAN (TO_DATE('20100301','YYYYMMDD'))
(SUBPARTITION M201002_N VALUES (NULL), SUBPARTITION M201002_NN VALUES (DEFAULT)),
PARTITION M210001 VALUES LESS THAN (MAXVALUE))
(SUBPARTITION M210001_N VALUES (NULL), SUBPARTITION M210001_NN VALUES (DEFAULT))
;

Hi Hoek,
the DB version is 10.2 (italian version, then SET is correct).
...there's something strange: now I can INSERT rows but I can't update them!
I'm using this command string:
UPDATE TW_E_CUSTOMER_UNIFIED SET END_VALIDITY_DATE = TO_DATE('09-SET-09', 'DD-MON-RR') WHERE
id_customer_unified = '123' and start_validity_date = TO_DATE('09-SET-09', 'DD-MON-RR');
And this is the error:
Error SQL: ORA-14402: updating partition key column would cause a partition change
14402. 00000 - "updating partition key column would cause a partition change"
*Cause: An UPDATE statement attempted to change the value of a partition
key column causing migration of the row to another partition
*Action: Do not attempt to update a partition key column or make sure that
the new partition key is within the range containing the old
partition key.
I think that is impossible to use a PARTITION/SUBPARTITION like that: in fact the update of "END_VALIDITY_DATE" cause a partition change.
Do u agree or it's possible an update on a field that implies a partition change?
Regards Steve

Problem with the table control BDC in FV60 transaction

Hi All,
I got the problem with the table control in FV60 transaction.
This is working for 900 line items.After 900 line items it is giving the problem like it is 1000th line item.You can post only 999 line items.
I know we can post only 999 line items,but in my file only 920 line items.
Please give me solution,if anybody come across this situation.
Thanks & regards,
rakesh.

Hello Rakesh ,
your file may have only 920 line items , but based on those line items, SAP may create few more new lines ( based on the clearing recon accounts , inter company transaction ...etc )...
regards
Prabhu

PDF export - problems with displaying tables

Hi,
I have nice and neat rtf template with some text and big table. It looks fine, but when I export it to PDF it starts the table from new page, not just below the text, which results in 75% blank page. How can I fix it?

We are using the PDF Export 8.3.7 version, and are having a similar problem. We have a Word file (.doc) with an embedded graphic. Inside the graphic is a table (the original graphic was created some where else and had text and a table, then an image was made of that which was then embedded as a graphic in the Word document). The problem is that the table does not render corretly - the last row of data is not displayed. Oddly, if in the resulting PDF/A output you highlight the region where the data should be displayed, and copy that to Word/Notepad, the data is there, the issue seems to be in rendering the data to make it visible in the rendered PDF/A output. We see other problems with tables in other files, for example some tables are rotated ninety degrees.
Will there be a fix to PDFExport anytime soon?
Thanks,
Kevin

Problem with the table view's _visibleBounds when used on a scroll view

I've had numerous problems with getting a table view to work on a scroll view since the table view keeps resizing (http://discussions.apple.com/thread.jspa?threadID=2618816&tstart=0)
I have created the views in IB. The scroll view is attached to the controller's view, and is assigned as the controller's view. The frame size of the scroll view is 320x436. I am manually setting the content size in code:
UIScrollView* tempScrollView = (UIScrollView*) self.view;
tempScrollView.contentSize = CGSizeMake(320, 720);
The table view's frame's width/height is set to 280x88 in IB (i.e the size of two cells), and the header and footer are set to size 0.
However, when I run the code, the table view is smaller, it is only 280x68. I have looked in the debugger, and the table view's _contentSize (of its scroll view) is 280x88; however, the _visibleBounds property is 280x68.
I've tried looking into the documentation for the UITableView class, but can't find anything on the _visibleBounds property, or where it is being set and how to force it to the correct size.
If anybody has any advice, I'd appreciate it.

I can get around this problem by going to the scrollview which the tableview belongs to, and unchecking the Autoresize Subviews box.
But if anybody knows about the _visibleBounds property, or the rules which are applied when resizing subviews, I'd be interested.

Problem with automatic table of contents Level headings

I am having trouble with the Table of contents in Adobe Indesign. When I create my automatic table of contents one of the Level headings that is supposed to appear under Chapter 1 instead appears under the Introduction heading. On the actual page where the heading paragraph styles have been defined the 2nd Level heading is as it should be underneath Chapter 1. So what I end up having to do is move them manually in the TOC. But I don’t want to have to do this and it would be great if Indesign instead did the automatic table of contents correctly.
I wonder if it has anything to with the fact that our template is set up with headings (that sit outside the body text to the left) as text boxes which we place inside the main body text box (they have anchored object settings on them so the heading sits off to the side). Whilst the anchored text box is exactly in the right sequence, maybe indesign senses and reads the anchored text box last?
I have an example of the file and the problem that is occurring in the pdf, it can be downloaded from:
Is there a solution to this? If anyone has any ideas I would be very grateful.

I've been playing with this for a while, and quite honestly I don't understand why it's doing things the way it is. It's working correctly on Page 11, which seems to me to have exactly the same structure, except for the subtitle. It also works correctly if I copy the frames from page 14 and paste into a new doc.
Things I tried that did not work: Export as .inx and move the pages to a new doc. You might try copying the text and pasting into a new doc.

Problems with exporting sheet to pdf

I want to make my data available on the web, so it's important that Adobe Reader and Reader plugin be able to open my pdf document. Preview has no problem with the the document. Adobe Reader can't seem to deal with it. The document is probably 4 standard pages wide and pretty long. It opens in Reader as an all white document. Interestingly, the preview of the pdf document is a long thin vertical box.
I also tried to upload the document to iwork.com. The document appears a bit blurry online, but you can see it. If you download the document, you still can't open it in Adobe.
Any idea?

I created a large table and saved with the "include Preview" active.
In the document itself I got the file:
Western 3:Important:ƒ banque:Chèques YK09.numbers:QuickLook:Preview.pdf
As I wrote, in this one, the table _is not cutted in pages_ as it is in the ones generated by Print to PDF or Export to PDF.
It's the monolytic one used by Spotlight.
My table contains 1800 rows so the subset syndrom doesn't strike.
So I can't guarantee that it's a deliberate feature or the result of a memory shortcut as written by BadUnit.
But now I'm sure that the PDF posted by the OP is not the one which we are supposed to use.
Grabbing the embedded PDF is not a good idea.
The thumbnails of the PDF printed from my test document:
The Thumbnails of the embedded Preview.pdf
The thumbnails of the OP's PDF
Is it clear now ?
Yvan KOENIG (from FRANCE mercredi 13 mai 2009 21:57:40)

Problem with scanning document in PDF format to computer

has anyone had a problem with scanning to the computer a document in pdf format from hp Photosmart 7525 e-All-in-One series wireless printer? The document appears in My Documents but when I try and open the document I get an error message that says the document cannot be opened. I can scan and open the document in TIF format. I am running Windows 7 Home Premium and I just installed the Photosmart 7525 printer. I've uninstalled and reinstalled the printer using the CD download.
This question was solved.
View Solution.

Hi,
Can you open other pdf files ? Do you have Adobe Reader in your computer ? Please download and install it on your machine then try to open file(s) again:
http://get.adobe.com/reader/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problems with a table in PDF`S footer

Similar Messages

Maybe you are looking for