Problems with Boot Camp and Drive Partition

First of all, let me preface this by saying I have in the past successfully partitioned my drive and installed Windows, but it was a while back and I can remember it was frustrating, but I don't remember the exact details. Also, I apologize for the rambling nature of this problem, but I'm trying to give as much relevant information as possible and walk through the steps I took to get where I am now.
Feel free to skip ahead to the end, the main problem seems to be I tried to create a 300 GB partition, but it didn't take or something. Now my storage is reflecting I've lost 300 GB, but it won't recognize the existence of the new partition.
Let me just walk through what I did. I deleted my previous partition because I was having some difficulties with a few programs and the partition ended up being too small and I wanted to make a bigger one anyway. I only use it for gaming and didn't care about any of the saved games so I just deleted the partition and figured I'd start over from scratch.
Before I begin, some technical details about the computer I'm working with. I don't know how much of this is necessary, but here it is:
It's a 27-inch late 2012 iMac with a 3.4 GHz Intel Core i7 processor with 24GB RAM running OSX 10.9.4
The storage space is a little more difficult as that is part of the problem I'm running into, which I'll get to in a minute.
Anyway, I have a Windows 7 Professional install DVD and a burned CD called Boot Camp, which I think is the drivers from last time I installed Windows (a year and half ago?), but since I needed Superdrive for the install DVD I just used an XHD I had to put the drivers on (like I said, I don't remember how I did it last time). I go through Boot Camp and look at how much space I have and how big I want to make my partition.
Side note: Last time I made my partition, I'm fairly certain I set it to 200 GB, but the partition size actually came out to something like 112 GB or something significantly less. I didn't know what happened, but figured it would still be enough space and it had been such a hassle I didn't bother doing it again.
Supposedly I have a 1 TB HD, and I can't remember exactly what it said when I partitioned the drive this time, but it definitely said I was using less than half of my capacity and I had plenty of room, so I opted to go for a 301 GB partition (the slider wouldn't let me do exactly 300) which still left me with around 300 GB of space left over on my Mac partition I want to say. I went ahead with it and it started partitioning the drive with the blue line moving very slowly and after an hour or so it was like 80% across but no longer making progress. I looked online and people said that shouldn't happen. I cancelled the partition and the Disk Utility showed the partition, but said it was unmounted or something.
I restarted my computer thinking maybe I'd try and see what would happen if I tried to boot it up as if I had Windows installed. I also at that moment remembered that I'd had a similar problem last time because I had my XHD plugged into my USB port so I unplugged that and held down OPT. It then showed me my Mac HD drive and a CD icon that said Windows, so I clicked on that figuring maybe I could install it after all.
It led me through a Install manager and it got to the point where it asked what drive/partition do you want to install Windows in, I recognized the screen and remembered I was supposed to choose a certain one, but couldn't remember which one and none of the sizes seemed to match the storage I had allocated to the partition. One was about 200 GB and since the last time I did it my partition came out 100 GB smaller than I had set it for I thought maybe that was it.
However, it said I couldn't install on that drive for some reason (I can't remember exactly what it said). So I restarted again and figured I'd go back and see what I did wrong and start over. When I check Disk Utility it no longer sees any partition (mounted or unmounted or anything) and that the entirety of my HD is dedicated to Mac HD.
The problem is, now I'm getting weird reports about the size of my drive, the amount used, and the space available. Disk Utility tells me I have 1.12 TB capacity, 301 GB available, and 819 GB used. That doesn't even add up. Furthermore, when I click get info on Macintosh HD, it tells me I have 810 GB capacity, 364 GB available, and 446 GB used. When I click on About this Mac and go to System Report and storage I get this:
Macintosh HD
Available: 364 GB
Capacity: 810 GB
Logical Volume Group:
     Name: Macintosh HD
     Size: 1.12 TB
     Freespace: 301 GB
Physical Volumes:
     disk0s2:
     size: 121 GB
     disk1s2:
     size: 999 GB
Now I really don't know what to make of it. That 301 GB free space makes sense as the partition I tried to create and if I add that to the 446 GB used on my Mac partition, plus the 364 GB available, that adds up to 1.12 TB (roughly, I've rounded off these numbers).
But how come Disk Utility doesn't recognize the partition then? What should I do from here?
I couldn't find anyone asking this exact type of question or running into this same problem before, so I hope I'm not asking about something that's already been answered. If that's the case, if you could direct me to where I can find the answer I'd be appreciative.
Otherwise, any help or light that can be shed would be most appreciated.
Thanks!

The problem seems to have gone away. I did click on repair disk in Disk Utility, I'm not sure if that did anything, but now when I run Boot Camp Assistant it is showing me the correct free space, so I don't know what happened. Oh well.
Still having trouble getting the **** thing to partition, but that topic is covered extensively elsewhere.

Similar Messages

  • I have a problem with boot camp and maybe macbook pro?

    I am having issues with boot camp here is what I did.
    I attempted to partition for windows then this message popped up after 2 minutes:
    Verification failed. this disk could not be partitioned.
    Use Disk Utility to repair this disk.
    so I used the disk utility to repair the problem then this message came:
    First Aid failed
    Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
    The underlying task reported failure on exit
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Incorrect block count for file Temp File
    (It should be 13 instead of 0)
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume bitmap.
    pair",0)
    Checking volume information.
    Invalid volume free block count
    (It should be 23087569 instead of 23087570)
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    So let me explain something. I just got the macbook pro put some music on it and pictures. so what do I do to fix this problem? please let me know.

    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If you are unable to repair the drive then you will need to reformat the drive using Disk Utility. Of course this will erase all your files so have a backup before you start.
    Basic Backup
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

  • Problems with Boot camp and External HDD's

    Hi, I recently installed windows XP using Boot Camp, and everything worked fine, until yesterday when I tried to reboot into MAC from WINDOWS. It restarts back into windows everytime, and now I can't get back to mac! (using leopard, not snow leopard) Whats wrong?
    Another thing, I have a 500gb Lacie ext HDD, and I can use it fine with mac, but when I tried to access it with windows, it won't work. It will appear in My Computer but when I log in it won't access the data. What can I do?
    Im using the HDD for backups with time machine, is this why windows cant access it?
    Thanks in advance

    FAT32 will accessible from both Windows and OS X
    If you don't want to reformat your ext drive you need something like http://www.paragon-software.com/home/hfs-windows/ or http://www.mediafour.com/products/macdrive/

  • Problem with boot camp and windows 8

    I have a Macbook late 2009 with Mountain Lion. I want to install windows 8 with boot camp but when I am asked to enter drivers, windows 8 don't find them. I have downloaded drivers from boot camp assistant but they don't work. When Apple will provide ???

    Obviously Boot Camp does not support Win 8 at this time. When and IF Apple decides to do that no one here knows. This is a user to user forum. Perhaps you should call Apple support and ask them.

  • Problems with Boot Camp - PLEASE HELP!

    I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
    Message was edited by: CarlConti08

    Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
    If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
    While your in there give it a name so you can easily identify it in your windows installer.
    If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
    Verify it before exiting DU.
    Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
    Don't forget to install Leo windows drivers after installing windows.
    Kj

  • Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

    Hi all,
    I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
    After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
    I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
    Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
    The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
    After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
    From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
    I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
    If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

    If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
    They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

  • Problems with Boot Camp, OSX Lion Server 10.7.3, and Windows 7

    My new Mac Mini Server is running OSX Lion Server 10.7.3. I want to install Windows 7 as a dual boot. I start up Boot Camp and use an ISO image to create a USB boot disk. I don't seem to be able to use the DVD to install, so I use an ISO image on disk. I continue with the Boot Camp installation, with all three options on the main screen checked.  When I get to the part where I have to pick a partition on which to install, the only one I can select, and must format, is the partition labeled BOOTCAMP. But the Boot Camp support software Windows is installed there. I can continue with the Windows installation, and boot into Windows 7 with no problem. But since the Boot Camp drivers were wiped out, I cannot connect to the network, etc. I don't have a Boot Camp control panel either.I did this once before on my other Mac Mini Server I have, running the same OSX Lion Server 10.7.3, and it worked without a problem. I'm writing this message on that copy of Windows. But this new install just will not work, after two days of trying. I *must* get this working. I'm stumped.
    CAN ANYONE HELP ??? TIA !!!!

    First, this is re-post of your other thread.
    Your driverrs were not and will not be "wiped out."
    Run Boot Camp Assistant. Download the drivers
    Your profile says Lion so that will let you store drivers on flash memory card.
    They are never placed where Boot Camp created a partition.

  • Installing Windows 7 RC1 with Boot Camp AND Parallels?

    I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
    I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
    If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

    Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

  • Problem with boot camp

    Hi, how are you all
    I have a problem since 3 months
    I tried something in boot camp and ended up doing something wrong
    Now every time I want to start my iMac I need to hold alt and choose MAC, or else it will take me to black screen that shows "no driver found to boot...."
    I thought it wasn't that big deal, I don't need windows anymore, and it is not that hard to hold alt key while imac starts
    but today I tried to install windows, because I upgraded ram to 12gb and wanted to try them, but I couldn't
    I did devoid the hard disk successfully, but when I want to install windows 7 the computer restart, this is normal I know, but then it takes me to the white screen again where I can either hold down alt button and it will take me back to snow leopard, or don't hold any key which will take me again to that black screen I mentioned before
    This is really frustrating
    I live in UAE so there is no apple store here, and no offense but every authorized apple reseller has stupid people that don't know a bit about MAC, just hired to sell with no knowledge, I asked them about the problem and no one knew what I was talking about and brought the imac and no one knew how to solve it.
    So hopefully ill find answer here
    Please if you know the answer tell me, want to try the RAM
    Thanks, Ahmad

    Redo your install.
    As in Boot from Windows 7 and do a clean install, format the drive which is already NTFS.
    Installation Guide Instructions for all features and settings.
    Boot Camp FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Discussions forums Discuss Boot Camp topics with other users.
    Troubleshooting
    iMac displays a black screen during installation of Windows 7
    Symptoms
    When installing Microsoft Windows 7 on an iMac (27-inch, Late 2009) and iMac (21.5-inch, Mid 2010) using Boot Camp, a black screen may appear. This can happen because the Windows 7 installer does not include the necessary graphics or Bluetooth drivers for your Mac.
    http://www.apple.com/support/bootcamp/
    Pay attention to any Apple tips and articles above that deal with your Mac.
    Have your OS X DVD ready for after Windows is installed.
    Tip: Most geniuses have mixed or limited or wrong information about Windows and installing on Mac, using Boot Camp tools. The above page and articles are good starting place, should be directed to when questions come up.
    And take everything with a grain of salt. Good luck.

  • Installed windows 7 with Boot camp and now cannot get back to OS x x

    Have installed Windows 7 with Boot Camp on a 20" 2006 iMac running X 6.8. Now cannot get back to original OS. Tried Snow Leopard in drive and holding c and various other keys  at start up but still Windows. Any ideas?

    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the disk icon for OS X.
      5. Click on the arrow button below the icon.

  • Using built-in iSight with Boot Camp and Yahoo Messenger

    Has anyone had a problem using Yahoo Messenger video conferencing by using the iSight?? It shows up as a USB device in the windows hardware but Yahoo says it isn't available. I can use the camera with other programs though. The camera works perfectly on the MAC side (of course). I can't figure out why I can use it for other programs but not Yahoo messenger. Any ideas.
    Thanks

    Welcome to Apple discussions, DualOSuser
    I no longer use YM in any OS, so I have no problems with it.
    If your only problem is with Yahoo video, have you checked a Yahoo Help search like this one? Yahoo should be able to give you the best help either to tell you how to make their software work with your system or to tell you the limitations of their software.
    You could also check Windows Help in case the problem might be with Windows.
    If you think the problem might be with Boot Camp, try searching Boot Camp Discussions.
    If you get no help via any of those alternatives, when you post back here for other ideas, tell us which Windows and YM versions you are using. Some Windows user may be able to offer suggestions based on your additional details.
    Cheers,
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • Problem with Boot Camp - Help!!

    Hi everyone,
    So I just got a new MacBook and installed Windows XP Home Edition through Bootcamp. I followed the computer certification guidelines of my college (so that I can connect to the network), i.e., I installed Symantec Antivirus and Windows Defender (required), and also Firefox and MS Office, and for good measure, I installed AdAware and Spybot (both free versions). I did not use the internet at all and scanned the totally-unadultered computer, deleting the very few things that popped up on Adaware and Spybot.
    However, the very next morning, Windows Explorer kept getting closed by "Data Execution Prevention" every time I tried to start Windows. (It says, "Instruction at 'Ox8bb9ed475' referenced memory at 'Ox8b9ed465'. Memory could not be 'written'".) Essentially, I can't use Windows and no amount of restarting remedies this.
    I took my MacBook to the Genius Bar at an Apple store and they said the problem was most likely Symantec Antivirus - apparently, Symantec has lots of problems with Bootcamp; they also recommended using Parallels instead. But since Penn requires Symantec to certify a computer, I don't know what to do about this (not to mention Windows won't run anyway)! To be sure, the Apple guys were very rushed and seemed to be speculating, so I'm not sure how to take their advice.
    Does anyone know what might be wrong? I remember reading that some current students at my school run Bootcamp just fine, and the tech dept. suggests using it as well. Any help would be GREATLY appreciated; I just don't want problems to occur once I start classes. Thanks so much.

    Perhaps you should post this question in the Boot Camp forum rather than here. This is not the proper forum for dealing with Boot Camp or Windows installation problems.
    I would consider reinstalling Windows. After verifying that it is working you can install Symantec AntiVirus and Defender, but I would not install anything else until you are sure the system is working properly. Note that you must turn off antivirus programs when you install new software. Failing to do so can result in defective installations.
    Be sure you have carefully read the Boot Camp documentation before installing anything.

  • Need help with Boot Camp and Win 7

    I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp.  I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
    I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1.  That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
    Thanks.
    Mike

    Mike,
    I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
    https://discussions.apple.com/community/windows_software/boot_camp
    Roger

  • Can I use Windows XP Home with Boot Camp and/or Parallels or VMFusion?

    I am planning on purchasing a new Mac Mini with Snow Leopard. I have a copy of Windows XP Home Edition that came with a 7 year old Compac computer, can it be used with either Boot Camp and/or Parallels or VMFusion? I REALLY don't want to purchase Windows if I can help it. Thanks!

    Read the boot camp requirements. I believe you will need a Windows disc that is stand alone. By that I mean a Windows disc that is not designed for a specific computer like your Compac. I believe that applies for Parallels and Fusion as well. Some of the newer disc that come with new computers may work since some of them are stand alone. I think your compac disc maybe married to your computer. You can try it when you get your Mac but it may not work.

  • Problem with Boot Camp internet connection

    I use Boot Camp only for playing games, and everything is working perfectly except for my internet connection.
    That is, it works perfectly for some time then without any apparent reason it just loses connection.
    It usually works for about 2 hours, then simply disconnects, without offering any explanation.
    A restart solves this problem for another couple of hours, then it disconnects again.
    This is quite bothersome when trying to play an MMO for any extended period of time.
    I am connected to the internet via router that is directly plugged into the iMac and don't have any problems on OS X.
    I'm running Windows 7 on Boot Camp and everything is working perfectly except for this.
    Anyone have similar problems or any idea what this might be and how to solve it?
    Thanks.

    Ever figure this out?

Maybe you are looking for

  • Error in PL/SQL - execute immediate

    Hi , I am getting this error when executing the procedure.Could you help me what wrong in it? SQL >create or replace procedure delete_emp_copy (tname in varchar2) is sql_stmt varchar2(200); begin sql_stmt :='delete from :1'; execute immediate sql_stm

  • Problem transferring from iPhoto to iPhone4

    I have imported pictures taken by my iPhone4 to iPhoto, however, when I put them into albums and sync, the photos will not transfer back to the iPhone4.

  • MPEG STREAMCLIP:  I need Exact export settings please...

    Does anyone have the correct settings for exporting Via MPEG STREAMCLIP. I know that there is a H.264 and MPEG-4 option in the codecs. I DO NOT want to use the 640x480 iPod settings since there is resolution loss from the DVD's. So what setting and b

  • Is there a command to capture iPad's screen in digital publishing?

    Is there a command to capture iPad's screen in digital publishing?

  • Dump in Cargo Management tab

    Dear all, After the application of SP10 TM 110, the system is raising a dump when selecting the tab Cargo Management in a Ocean Freight Booking. It seems like attribute CONT_CNT_VAL_AQ_CA is missing after the SP upgrade. I havent found any note about