Problems with camera connector

hi,
i have a 5th generation iPod & a canon eos 20d. I have used the camera connector a few times but for some reason then i transfere pictures from a 2Gb CF card it does not move all the pictures. My estimate is that I get about 50 of the 300 pictures i have in the camera to the iPod...
Any ideas what I should try?
/mike

try this link. hope this would help.
http://docs.info.apple.com/article.html?artnum=303474

Similar Messages

HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
It seems to me that the connection port is faulty.
George

Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Nokia 6303c Problem with camera, says camera on st...

nokia 6303c Problem with camera, says camera on standby solution, any body got any solutions
many thanks in advance

try to free up some of your phones memory delete unwanted files ,delete text ,images etc or move to memo card
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Can i Use The Apple Wired Keyboard With Camera Connector Kit

Can i Use The Apple Wired Keyboard With Camera Connector Kit
3g 64gb verizon

People report it is still possible to use a wired USB keyboard with the CCK, if you use a powered USB hub to get around the "not enough power" error message. (I have done this with an older Apple USB keyboard my non-jailbroken iPad1 on iOS 4.3.3.) Normally, powered USB hubs have a AC power adapter so you lose portability unless you can find a battery powered USB hub. At this point, the (in)convinience of the USB hub becomes an issue, depending on what you get.
And wired USB keyboard were never supported for the iPad. So there's no guarantee that it will continue to work with future iPad updates from Apple. So best to go with a Bluetooth keyboard unless you have a specific USB keyboard that you "must" use. If you have all the equipment already, I say give it a try. But I would not recommend trying a USB keyboard if you have to purchase anything.

Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

Has anyone been having problems with camera, safari etc. crashing on iOS 5.0.1 because I have been having the problem as well as my brother I have the iPhone 4. If anyone else having same issue comment below

Then the next step would be a restore as new to rule out corruption in the backup.

Viewing photos imported with camera connector

Hello,
I just purchased a camera connector and was immediatedly able to import photos from my camera with no problems. However, the manual states that I should be able to view the photos by (1) Choosing Photos > Photo Import, and then choose the roll I want to view and (2) Choosing Browse to display my photos.
The problem I'm having is that after I choose my roll it only shows the roll info (11 photos, size 17.3 MB) and options for Delete Roll or Cancel. There is no Browse.
I'm using a 60 GB Video iPod with version 1.2 firmware.
Any help would be appreciated. I've already searched the discussions and didn't see anyone with this exact issue.
Thanks.
MacBook & G4 Quicksilver Mac OS X (10.4.8)

False alarm I guess. I didn't change any settings on the camera or iPod, but now I can browse through the imported pictures. Curious.

Crash during picture transfer with Camera Connector

I searched on various places and have found some people have similar issues but I have not seen a solution.
I have a Casio Exilim EX-Z4 and a brand new iPod Video 80Gb. For my holiday, I borrowed a Camera Connector from a friend of mine and briefly tested the combination with a couple of pictures on the SD card of the Casio camera. This worked fine.
However, it did turn out not to work well. As the SD card contains approx 100 pictures, I left the iPod alone during the copy. After a while, it appeared to have finished. But looking at it, only 30 or so pictures had been copied. And even worse, the iPod did not work as it did before. It could not play any media anymore.
A reset did the trick, but it did not solve the Camera Connector problem. Next import, the same happened but then the pictures could not even be seen on the iPod. Had to reset again. I tried several times, different SD cards in the camera, all the same predictable result.
Coming home, iTunes suggests a firmware update to 1.2.1 so I hoped this would solve the problem. Unfortunately not, I am still unable to use the Camera Connector and have to reset the iPod when I try to do.
Is there any solution to this?

I had the same problem with an 80GB Ipod and a Canon s50. I found that the only way to get back the ability to play the media was to drain the battery completely, and then recharge. Things would work then. When I went to look at my photos, I noticed that the "difficult roll" had only transfered 49 of 500 pictures, and you couldn't view any of the transfered pictures. I deleted the roll but was never able to successfully transfer the pictures from the card - I tried 3 times with the same result. I'm actually returning the camera connector and the Ipod.
Dell Windows XP

Does iPod Nano work with Camera Connector?

Is the iPod Nano able to work with the Camera Connector? How about the Belkin Camera Connector or Belkin Media Reader?

6GB nano we might see in a year, a 20 GB nano is presently only a fantasy and while eventually possible, we won't be seeing it anytime soon. To my understanding the belkin media reader uses firewire to communicate among other things so no it wont work with the Nano. And of course the Nano is windows preformatted windows compatible.

Problems with Camera Raw 6.7 after upgrading to OS 10.8

I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open. Does anyone know of a solution or work-around for this problem?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

New problem with camera and imovie 08

i have two questions already posted about my camera not being found by imovie 08 except that it did it the first time and wouldn't any time after that.
well here's the new problem. as i'm sitting here trying to find some other post that could help me with my dilemna imovie opens and shows my impost screen but says "communication error". with my first joy and imovie working again came confusion about this error. the error makes it so i cannot import video because the next "error" that comes up says my camera is disconnected or off but even this is farther than i've gotten in weeks. i don't know what this error means and i still can't import video. anyone have any suggestions as to how to fix this?

Hi
Test another FW-Cable.
Test Your Camera on another Mac so that DV-in still works OK
Toogle in iMovie pref: Play-back via Camera (on<->off some times)
Other ways to import Your miniDV tape:
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
What Camcorder ?
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
Using WHAT ? :
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
Free space on internal (start-up) hard disk ? (Others don't count)
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Delete iMovie pref file may help sometimes. I rather start a new account, log into
this and have a re-try.
from LKN 1935:
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten:
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check:
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
Yours Bengt W

Problem with outlook connector LDAP Directory MAPI Service Provider is not

Hi,
I have very basic problem with sun outlook connector client.
I am using sun java system connector deployment tools to create client installation script, on first page I have to supply the location for web publisher and Microsoft LDAP service, I can find web publisher and I don't have any clue about location of LDAP services and without this my client instaltion script keep failing with following error.
The Microsoft LDAP Directory MAPI Service Provider is not installed.
--- 2006/09/25 14:14 ---
14:14:25 [5365] Outlook version is 11.0.5608.0.
14:14:25 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
14:14:25 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
14:14:26 [5362] Checking Windows version.
14:14:26 [5363] Windows version is 5.1.
14:14:26 [5364] Checking Outlook version.
14:14:26 [5509] Checking default mail client.
14:14:26 [5508] Default mail client is 'Microsoft Outlook'.
14:14:26 [5178] Verifying that Outlook is not running.
14:14:26 [5179] Trying to login to shared session.
14:14:26 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
14:14:28 [5502] Upgrading the Sun Java System MAPI Service Providers.
14:14:38 [5370] Finished installing Sun Java System MAPI Service Providers.
14:14:38 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
14:14:38 [5367] Sun Java System MAPI Service Providers are installed.
14:14:38 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
14:14:38 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
14:14:38 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
14:14:38 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
14:14:38 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
14:14:38 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
14:14:38 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
Thank you for your help.
Best regards
Mo

Hi,
If memory serves, Outlook XP offered the ability to set what address-book connectors were installed, one of which was LDAP (by default enabled). It may be a similar situation with Outlook 2003 (which I assume you are using based on the version number in the debug logs). Try using the Office '03 install CD and see if you can find the LDAP addressbook option and install it.
Regards,
Shane.

Mics and audio interfaces that work with Camera Connector

FYI: After playing with the Camera Connector I have been able to connect USB recording gear for use with MultiTrack DAW app on the iPad. The Blue Yeti, Samson's GTrack and Roland's Cakewalk Audio Interface all work for inputting audio. All three have internal headphone jacks which work for monitoring both the input and multitrack recordings.
One caveat with the Yeti: it appears to be almost at the limit of the power that the iPad's USB Camera Connnector can supply. Some headphones and earbuds shut down the mic. Sennheiser HD280 phones work fine, but some of the Sennheiser buds don't.

It has been reported before that a lot of USB audio devices (e.g., headsets, microphones). As an example see:
http://www.electronista.com/articles/10/04/24/ipad.has.native.usb.support.for.ma ny.devices/

Problem with OID Connector

I am having a problem with OIM 9.1.0 + OID
I am install IOM 9.1.0 + Connector OID according to this guide: http://download.oracle.com/docs/cd/E11223_01/doc.904/e10436/deploy.htm , but to create a user via console Xellere see in the logs of my body OC4J the following errors:
08/09/09 18:45:58 Running GetTargetAttributeMapping
08/09/09 18:45:58 Running GetProcessData
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:User ID
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Password
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Title
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:First Name
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Middle Name
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Last Name
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Organization DN
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Department
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Location
ERROR,09 Sep 2008 18:45:58,529,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Telephone
ERROR,09 Sep 2008 18:45:58,530,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Email ID
ERROR,09 Sep 2008 18:45:58,530,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Preferred Language
ERROR,09 Sep 2008 18:45:58,530,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Time Zone
ERROR,09 Sep 2008 18:45:58,530,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:Server Address
ERROR,09 Sep 2008 18:45:58,530,[XL_INTG.OID],OID:tcUtilAttributeNameMap -> Mapping NOT found for the form field:OID Connector Version
08/09/09 18:45:58 Running SHOULDUSEXLORG
08/09/09 18:45:58 Target Class = java.lang.Boolean
08/09/09 18:45:58 Running SHOULDUSESSL
08/09/09 18:45:58 Target Class = java.lang.Boolean
08/09/09 18:45:58 Running CREATEUSER
08/09/09 18:45:58 Target Class = com.thortech.xl.integration.OID.tcUtilOIDUserOperations
ERROR,09 Sep 2008 18:45:58,623,[XL_INTG.OID],OID:tcUtilLDAPOperations -> : NamingException: Unable to search LDAP[LDAP: error code 32 - No Such Object]
ERROR,09 Sep 2008 18:45:58,624,[XL_INTG.OID],tcUtilOIDUserOperations -> NamingException: Error while connecting to target. OID:tcUtilLDAPOperations -> : NamingException : Unable to search LDAP [[LDAP: error code 32 - No Such Object]]
ERROR,09 Sep 2008 18:45:58,624,[XL_INTG.OID],tcUtilOIDUserOperations -> NamingException: Error while connecting to target. tcUtilOIDUserOperations -> OID:tcUtilLDAPOperations -> : NamingException : Unable to search LDAP [[LDAP: error code 32 - No Such Object]]
Then the user is not provisioned to OID and in provisioning details this appear in state Rejected.
Someone has idea where the problem can come?
Since already thank you very much
Maro

Hi,
The change resolved the issue, Thanks a lot :).
But when i give Organisation DN as "" (I just cleared the value in the process form), The provisioning is failed.
Is this Organisation DN a mandatory attribute????
Also it would be great if you could share the rational behind those changes.
I am very new to OIM , please bare with my ignorance.
Thanks
Edited by: jarah on Oct 1, 2008 10:36 AM

Problem with camera connection kit and IOS 5

Since I upgraded my IPAD 2 to IOS 5 camera connection kit is no longer working properly:
- when importing from a given CF card for the first time camera connection kit it is working with my camera (Canon EOS 7D)
- however, as soon as i take additional photos on a non-empty CF card, things start getting weird when importing:
- duplicates are no longer reliably recognized (some of the photos imported before are indicated as duplicates others not), hence an incremental upload of photos is no longer viable
- some RAW photos are corrupted during import (it shows an "RAW" icon in the photo app, but no preview and the photo cannot be enlarged)
I never had such problems with IOS 4.x I'm really frustrated about IOS 5.0 since camera conenction kit and the ability to deal with RAW photos were my main reasons to buy an IPAD...
Anybody experiencing similiar problems? Any viable workarounds?
Thanks
Claudio

Friend, you say "The files must have a filename with exactly 8 characters long (no spaces)" What if one has several hundred photos/files. Renameing them on my computer each 8 characters long adds an extension (1), (2), (3), and so on. For example, "JUNE2014(1). The connection kit won't read the photos due to the extra (1). How can I fix this without having to rename each of the hundreds of photos one by one?
Thank you, Cisco.

Problems with camera connector

Similar Messages

Maybe you are looking for