Problems with Cluster Ready Service installation (RAC) in Oracle 10g R1

Hello
I have got problems with this installation. I am starting Oracle user
At the end of the installation I get a mesage when all Configuration Assistants are failed
I have got 2 computers with Windows 2000 PRO, two networks (private and public)
As a shared disk I use one external disk (with USB) attached to one computer.
What to do here?
please for a reply
Martin
PROT-1: Failed to initialize ocrconfig
SCLS error 1 reading current privileges.
Internal Error Information:
Category: 1234
Operation: scls_iddb_has_privgrp_by_name
Location: NetLocalGrou
Other: get local group failed
Dep: 0
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
ignoring upgrade failure of ocr(-1)
failed to configure Oracle Cluster Registry with CLSCFG, ret 102
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Notification Server Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/racgons.exe add_config migi:4948'
Start output from spawned process:
End output from spawned process.
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Launched configuration assistant 'Oracle Private Interconnect Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:cluster_interconnect "public"/192.168.1.0:public'
Start output from spawned process:
PRIF-12: failed to initialize cluster support services
End output from spawned process.
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
PRIF-12: failed to initialize cluster support services
Result code for launching of configuration assistant is: 1
The OUICA command is launched from D:\oracle\product\10.1.0\crs\oui\bin\ouica.bat.
Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
User Selected: Yes/OK
Starting to execute configuration assistants
Launched configuration assistant 'Oracle Cluster Ready Services Configuration Assistant'
Tool type is: Optional.
The command being spawned is: 'D:\oracle\product\10.1.0\crs/install/crssetup.config.bat'

Also you clusterware installation installs to an ORACLE_HOME.
Oracle does only make a differentiation, if it has to be clear, that you got a clusterware home and a database home.
Normally if a patch is referring to $ORACLE_HOME (and the patch can be used for clusterware & database), it just means the installation directory of the oracle software installed.
Sebastian

Similar Messages

  • CRS-4535: Cannot communicate with Cluster Ready Services

    [[email protected] ~]$ /u01/app/11.2.0/grid/bin/cluvfy stage -post crsinst -n bnl11237dat01,bnl11237dat02 -verbose
    Performing post-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "bnl11237dat01"
    Destination Node Reachable?
    bnl11237dat01 yes
    bnl11237dat02 yes
    Result: Node reachability check passed from node "bnl11237dat01"
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    bnl11237dat02 passed
    bnl11237dat01 passed
    Result: User equivalence check passed for user "oracle"
    ERROR:
    Unable to obtain network interface list from Oracle Clusterware (OIFCFG)
    Verification cannot proceed
    Post-check for cluster services setup was unsuccessful on all the nodes.
    [[email protected] ~]$ oifcfg iflist
    bond1 10.32.25.160
    bond2 10.32.17.200
    bond2 169.254.0.0
    bond0.1515 10.32.24.0
    bond0.1536 172.16.7.0
    [[email protected] ~]$ oifcfg iflist -p
    bond1 10.32.25.160 PRIVATE
    bond2 10.32.17.200 PRIVATE
    bond2 169.254.0.0 UNKNOWN
    bond0.1515 10.32.24.0 PRIVATE
    bond0.1536 172.16.7.0 PRIVATE
    [[email protected] ~]$ oifcfg iflist -p -n
    bond1 10.32.25.160 PRIVATE 255.255.255.240
    bond2 10.32.17.200 PRIVATE 255.255.255.248
    bond2 169.254.0.0 UNKNOWN 255.255.0.0
    bond0.1515 10.32.24.0 PRIVATE 255.255.255.192
    bond0.1536 172.16.7.0 PRIVATE 255.255.255.0
    [[email protected] ~]$ /u01/app/11.2.0/grid/bin/onsctl debug
    HTTP/1.1 200 OK
    Content-Length: 1923
    Content-Type: text/html
    Response:
    == bnl11237dat01:6200 8732 11/05/19 11:44:09 ==
    Home: /u01/app/11.2.0/grid
    ======== ONS ========
    IP ADDRESS PORT TIME SEQUENCE FLAGS
    127.0.0.1 6200 4dd4f2a3 00000000 00000008
    Listener:
    TYPE BIND ADDRESS PORT SOCKET
    Local 127.0.0.1 6100 5
    Remote any 6200 7
    Remote any 6200 -
    Connection Topology: (1)
    IP PORT VERS TIME
    127.0.0.1 6200 4 4dd4f2a3=
    Client connections:
    ID CONNECTION ADDRESS PORT FLAGS SENDQ REF SUB W
    0 internal 0 01008a 00000 001 002
    2 127.0.0.1 6100 01001a 00000 001 001
    1 127.0.0.1 6100 01001a 00000 001 001
    3 127.0.0.1 6100 01001a 00000 001 001
    4 127.0.0.1 6100 01001a 00000 001 001
    7 127.0.0.1 6100 01001a 00000 001 000
    request 127.0.0.1 6100 03201a 00000 001 000
    Worker Ticket: 10/10, Last: 11/05/19 11:42:21
    THREAD FLAGS
    40460940 00000012
    405b4940 00000012
    41280940 00000012
    Resources:
    Notifications:
    Received: Total 0 (Internal 0), in Receive Q: 0
    Processed: Total 0, in Process Q: 0
    Pool Counts:
    Message: 1, Link: 1, Ack: 1, Match: 1
    [[email protected] ~]$
    [[email protected] ~]# /u01/app/11.2.0/grid/bin/crsctl stop crs
    CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.crsd' on 'bnl11237dat01'
    CRS-2790: Starting shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.bnl11237dat01.vip' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.oc4j' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.cvu' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.LISTENER.lsnr' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.bnl11237dat01.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.cvu' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.scan1.vip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.LISTENER.lsnr' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.bnl11237dat02.vip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.scan3.vip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.scan2.vip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.scan1.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.bnl11237dat02.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.scan3.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.scan2.vip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.oc4j' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.ons' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.ons' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.net1.network' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.net1.network' on 'bnl11237dat01' succeeded
    CRS-2792: Shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01' has completed
    CRS-2677: Stop of 'ora.crsd' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.mdnsd' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.crf' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.ctssd' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.evmd' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.mdnsd' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.crf' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.evmd' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.ctssd' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.cssd' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.cssd' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.gipcd' on 'bnl11237dat01'
    CRS-2673: Attempting to stop 'ora.diskmon' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.gipcd' on 'bnl11237dat01' succeeded
    CRS-2673: Attempting to stop 'ora.gpnpd' on 'bnl11237dat01'
    CRS-2677: Stop of 'ora.diskmon' on 'bnl11237dat01' succeeded
    CRS-2677: Stop of 'ora.gpnpd' on 'bnl11237dat01' succeeded
    CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01' has completed
    CRS-4133: Oracle High Availability Services has been stopped.
    [[email protected] ~]# /u01/app/11.2.0/grid/bin/crsctl start crs
    CRS-4123: Oracle High Availability Services has been started.
    [[email protected] ~]# /u01/app/11.2.0/grid/bin/crsctl check crs
    CRS-4638: Oracle High Availability Services is online
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
    CRS-4534: Cannot communicate with Event Manager
    I am unable to start Oracle Cluster Service on 11.2.0.2. Please can I know what the problem is and how to start CRS
    thanks.

    Hi,
    after the crsctl start crs you have to wait a while till the clusterstack is up. You just issued crsctl check crs a little to early.
    To see the startup stack do a crsctl stat res -t -init.
    If not everything in crsctl stat res -t -init goes to online after a while, then you have a problem, which has to be analyzed.
    However if crsctl stat res -t -init show everything is started use crsctl stat res -t to see the other processes coming online.
    Can you post the crsctl stat res -t -init (if not everything is online) or a crsctl stat res -t.
    Only thing which I find strange is that oifcfg does not list a PUBLIC interface...
    Regards
    Sebastian

  • Cluster Ready Services installation stall

    At the final step, when asked to execute:
    /u02/oradata/orcl/root.sh
    as the root user, I get the following output:
    Adding daemons to inittab
    Preparing Oracle cluster Ready Services (CRS):
    At this point, the script hangs indefinitely. I ran the script with "sh -x ./root.sh" and found that the script actuall is STALLING at this step:
    + /etc/init.d/init.crs start
    Preparing Oralce Cluster Ready Services (CRS):
    + /sbin/init q
    + /etc/init.d/init.cssd startcheck
    I've attempted an install on 2 seperate computers running both WhiteBox Linux 3 as well as Centos OS 3.4 with no luck.
    Any ideas would be GREATLY appreciated.

    I don't know, why this happens, I have only a kind of workaround.
    If you don't use Real Application Cluster and/or ASM (Automatic Storage Management) , you don't need CRS. So you could modify root.sh to exclude all CRS configuration and start statements.

  • Problem with Pro*C reading BLOB field from Oracle 10g

    Hello Experts,
    We have a Pro*c application which is reading the BLOB data fields (a PNG image file) from Oracle data base. It holds the BLOB fields returned from the SQL query into a Unsigned Char structure in Pro*C. The program used work fine on AIX 32 – bit 4.3 and Oracle 8.1 environment.
    Recently, we have upgraded the environment to AIX 64-bit 5.3 and Oracle 10g.Since after the Pro*c program has problem in reading the Blob filed.
    Below is the query we are trying to execute –
    EXEC SQL
    SELECT
    signtre_image, image_file_name_ext
    INTO
    :msipLocalImage INDICATOR :msipLocalImage_i,
    :file_name_ext INDICATOR :file_name_ext_i
    FROM
    dcs_sign
    WHERE
    signtre_nbr = :signtre_nbr;
    Here signtre_image is the BLOB fields and msipLocalImage is a Pro*C structure define as below –
    typedef struct tagSignImage
    long len; /* Image length */
    unsigned char img[1]; /* Pointer to first byte. */
    } MOTS_SIGN_IMAGE;
    The quesry does not give any error or exception message in the Pro*C , program just stops at the point of executing the quesry..When we run the query commenting the BLOB filed it works fine. Also, the query runs good when we run it in the Oracle editor.
    There seems to be problem with the way we are reading the BLOB field in the new Oracle 10g enviromet.
    Does any body have any idea what’s wrong with this query? We really need it to work.
    Any Help will be greatly appreciated.
    Thanks,
    - Rajan Yadav

    Thanks a ton for your response.
    We made the necessary changes as suggested by you.This time we got another flavour of error - SQL Error Code - Inconsistent error while reading BLOB.
    Another thing we noticed is that the data field which we are trying to read is defined as LONG RAW instead of a BLOB in data base.
    Are these two things related in any sense or is there anything else which is causing the error.
    Once again Thanks for your help.
    - Rajan Yadav

  • Error while installing Oracle Cluster Ready Services – Release 1 (10.1.0.2)

    Hi all,
    I am trying for RAC – 10gR1 (10.1.0.2) using two machines with Windows 2000 Server. For this I need to install Oracle Cluster Ready Services – Release 1 (10.1.0.2).
    Machine details are as follows:-
    Node 1:
    Computer Name:     RAC1
    Windows 2000 IP Configuration
    Ethernet adapter Local Area Connection 2: (Used for Public Interface)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 192.168.1.65
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 10.10.10.11
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Node 2:
         Computer Name:     RAC2
    Windows 2000 IP Configuration
    Ethernet adapter Local Area Connection 2: (Used for Public Interface)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 192.168.1.181
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 10.10.10.12
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    I have made following entries in Hosts file of both the machines:-
    192.168.1.65     RAC1
    192.168.1.181     RAC2
    10.10.10.11     RAC01-PRIV
    10.10.10.12     RAC02-PRIV
    192.168.1.201     RAC01-VIP
    192.168.1.202     RAC02-VIP
    I have completed all the pre-installation steps, i.e. configuring the disk for storage, and both the machine are communicating each other through there Private and Public interfaces. Now the problem appears when I am installing Oracle Cluster Ready Services, at the end of Installation following message appears and the auto configuration steps fails.
    ================================================================================================================
    Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 1: rac1 rac01-priv rac1
    node 2: rac2 rac02-priv rac2
    Creating OCR keys for user 'administrator', privgrp ''..
    Operation successful.
    Now formatting voting device: \\.\votedsk
    Successful in setting block0 for voting disk.
    Format complete.
    Step 1: checking status of CRS cluster
    Step 2: configuring OCR repository
    Step 3: configuring safe mode for CRS stack
    Step 4: Starting up CRS stack on all nodes
    RAC1 service OracleCSService in improper PENDING state, err(997)
    RAC2 service OracleCSService in improper PENDING state, err(997)
    Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
    ================================================================================================================
    Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
    Configuration assistant "Oracle Notification Server Configuration Assistant" failed
    ================================================================================================================
    Output generated from configuration assistant "Oracle Private Interconnect Configuration Assistant":
    PRIF-10: failed to initialize the cluster registry
    Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
    ===============================================================
    I would be highly obliged if any one tell me why it is happing like this and what could be the possible remedy.
    Waiting for the respone.
    With Regards
    Dinesh
    dineshkha[email protected]

    Hi user478171,
    I have the same problem with two nodes in Windows 2003 with RAC 10g R2, but I don't have idea to solve.
    Please advice me
    Thanks advances
    regards,
    IvanR

  • Linux server logs Cluster Ready Services completed waiting on dependencies

    hi all
    we run oracle 10g RAC on two nodes of SLES 10 SP2 Itanium.
    on node 1 of the db node I see this message.
    Mar 13 15:35:03 odbs1 logger: Cluster Ready Services completed waiting on dependencies.
    This message has appeared for the second time in 3 days. the server is behaving normally. Could someone please let me know what exactly is the cause.
    i tried to google a bit but i am not an expert in RAC
    Could someone please let me know if this is a major issue or is it a generic message for something

    Hi,
    It means that the CRS not came up on startup and you put it online manualy.
    Check your ocssd.log for messages like it
    [ CSSD]2007-09-13 15:43:00.038 [1147169120] >TRACE: clsc_send_msg: (0x7271b0) NS err(12571, 12560), transport (530, 113, 0)
    If they exists, the explanation is: The network on OS startup is slower than CRS and the CRS cannot communicate with others nodes with interconnect. To avoid split brain problem, it kills himself causing automatic start of CRS fails.
    This problem could be solved add a sleep on /etc/rc.d/rc3.d/SXXXinit.crs before line $ID/init.cssd autostart. Try sleep 15, sleep 20 and test restart of node.
    You can see it on My Oracle Suporte note ID 459169.1
    I hope it helps!!
    Best Regards,
    Rodrigo Mufalani
    www.mufalani.com

  • Cluster ready services also for download?

    Hi,
    additionally to Oracle Database 10g (for Solaris) download, is it possible to download also "Cluster REady Services Release 1 CD-ROM"?
    Hi
    Michal

    Bring up the big Downloads page. (Big red button in the heading gets you there)
    Nowadays the product's called Clusterware, because "With Oracle Database 10g Release 2 (10.2), Cluster Ready Services, or CRS, is now called Oracle Clusterware.".

  • Cluster Ready Services Download

    Could someone tell me where to find the download for release 2 is. I have CRS for release 1 but I can't seem to find it for R2.(Is this something I must buy now?)
    Thank you

    Bring up the big Downloads page. (Big red button in the heading gets you there)
    Nowadays the product's called Clusterware, because "With Oracle Database 10g Release 2 (10.2), Cluster Ready Services, or CRS, is now called Oracle Clusterware.".

  • Want to download Oracle Cluster Ready Services Release 1...

    Hello Guys,
    I need to down load oracle cluster ready services, can any one specify the link where i can download from?
    Please help.
    Imran

    Bring up the big Downloads page. (Big red button in the heading gets you there)
    Nowadays the product's called Clusterware, because "With Oracle Database 10g Release 2 (10.2), Cluster Ready Services, or CRS, is now called Oracle Clusterware.".

  • Cluster Ready Service in LAN

    Hello
    Is it possible to make Cluster Ready Service in LAN (two computers having Windows 2000 professional having only one network adapter on each node connected through the router with each other)?

    two network adapters and Real Application Cluster

  • Problem with reversal of Service entry Sheet

    Hi All,
    I am facing a problem with reversal of service entry sheet. The user has posted the document in dec 2009 and now the user wants to reverse the doc. I told the process how to reverse it. But when she is trying to revoke the acceptance, she is getting error log.I told her to reset the posting date to present date.Now she tried to change the doc date but she is getting error as "604 item 010 WBS element ****** budget exceeded year 2009". So i advised her further to increase the budget in the year 2009. Even that solution is not working.
    Please help in this regard
    Thanks & Regards
    Nisha Prasad

    Hi,
    The user is not authorised to change the budget. The person resposible for this is telling that increasing the budget wont help. can you tell me how to view whether the budget is available for the system in the period or not? Can you please help me in this regard?
    Thanks
    Nisha

  • Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    Hi ! I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an e.mail i can use in Apple USA? Thanks.

    Good morning. I need to send an e.mail reporting a problem with de Authorized Service Provider in Brasil. I contact Apple Brasil, but didn't solve. Someone know an Apple's USA e.mail i can use ? Thanks.

    There is a link at the bottom of this page. http://www.apple.com/contact/

  • Problems with Input Ready Query

    Hello All,
    I'm facing problems with input ready query for BI IP.
    I've created the input query on aggregation level and maintianed all the planning settings.  It is not allowing me to edit, when i'm attaching in the web template.
    I also attached a button copy function, and i'm able to execute it and save it, but it not allowing me to change manually.
    I also enabled the 3rd option for keyfigures...data can be changed with planning functions and user input.
    Please help me in this regard.
    We have just started the development of BI-IP, please suggest me if there are any notes to be applied.
    Regards
    Kumar

    Hello Johannes,
    Yes I've set to the finest granularity...even if it is Only one characteristic and one key figure without any restrictions...
    I've checked even planning tab page under properties...it is also fine..
    But still it is not allaowing me to go to edit mode...this is a fresh instalation and the query i'm working is the first one...
    Please suggest me if there are any notes to be applied, we are on Support Pack 10.
    Regards
    Jeevan Kumar

  • Problem with RESTful web service

    I am running into a problem with Flex Web Services (REST) in trying to get the proper format returned. I can see that the HTTP header is set to
    Accept: */*;
    rather than
    Accept: application/xml
    when sending the request. The web service was generated via the web services HTTP data services wizard. I edited it to set the resultFormat to xml
        // Constructor
        public function _Super_UsersService()
            // initialize service control
            _serviceControl = new mx.rpc.http.HTTPMultiService();
             var operations:Array = new Array();
             var operation:mx.rpc.http.Operation;
             var argsArray:Array;
             operation = new mx.rpc.http.Operation(null, "getUsers");
             operation.url = "http://localhost:8888/users";
             operation.contentType = "";
             operation.method = "GET";
             operation.resultFormat = "xml";
             //operation.serializationFilter = serializer0;
             operation.properties = new Object();
             operation.properties["xPath"] = "/";
             operation.resultType = valueObjects.Users;
             operations.push(operation);
             _serviceControl.operationList = operations; 
             model_internal::initialize();
    How does one configure the accept header?

    Hi,
    I have posted a simple application with the RESTful reference:
    http://apex.oracle.com/pls/apex/f?p=13758
    I can give you full privileges on this so you can look at the WEB service reference. Shall I send to you separately for login user?
    It is using the RESTful service: http://apex.oracle.com/pls/apex/nd_pat_miller/demo/employee/{deptno}
    This RESTful service tests fine when I test from within the RESTful web service module of the Workspace.
    I based this on the Video demo tutorial for RESTful web service that Oracle published for 4.2 release. The video seemed to exclude the {deptno} in the URL but when I try that, it doesn't work either.
    This is the error I am getting when I run this on my Apex environment: (it, of course, will not run the web service in the apex.oracle.com environment)
    class="statusMessage">Bad Request</span>                                         
    </h3>                                         
    </div>                                         
    </div>                                         
    <div id="xWhiteContentContainer" class="xContentWide">                                         
    <div class="xWhiteContent">                                         
    <div class="errorPage">                                         
    <p>                                         
    <ul class="reasons"><li class="badRequestReason"><span class="target" style="display:none;">uri</span><span class="reason">Request path contains unbound parameters: deptno</span></li>                                    
    </ul>Thanks,
    Pat
    Edited by: patfmnd on May 8, 2013 3:33 AM

Maybe you are looking for

  • Regarding Performance Issue

    Hi Friends,    i have a FI report, Main Cash Vocher Printing, the report is very slow so to check its performance i have done the SQL Trace in ST05. in SQL trace i have found all the DB tables used and time taken to execute the select statement.... i

  • IBooks Author books and iPhone 6 Plus

    Will ibooks author books that have pictures, audio, video, and other widgets, be readable on iPhone 6 Plus?

  • Gamil contacts Duplicates, Triplicates X4 etc.

    I'm new to the forum but.. I hope this is where I can get some good advice. My iPhone 3gs syncs my google contacts but gives me duplicates/triplicates of my contacts. I searched the web and it seems to be a common problem but the sites that I visited

  • Problem displaying tabset in mac osx

    i'm using WInXP version of JSC 2 to develop a web app. The tabset i created display perfectly in IE but neither safari, opera nor firefox able to display the tabset in my mac osx. Is it web app develop by windows version of JSC not compatible to disp

  • Java 3deditor won't load!!! PLEASE HELP!

    When i run j3dedit i get this- C:\j2sdk_nb\netbeans3.5\j3dnewbean\J3dEditor_2.0\bin>java -Xmx256m -cp ..\..\J3d Fly_2.0\lib\j3dfly.jar;..\..\J3dFly_2.0\lib\jh.jar;..\..\J3dFly_2.0\lib\j3dfly-u tils.jar;..\lib\j3dedit.jar;..\lib\j3d_interposer.jar; -D