Problems with converted .CR2 files to .dgn on Mac Snow Leopard

Hi,
I'm trying to convert .CR2 files from my Canon 70D into .dng files so that I can use them in Adobe Bridge CS5. I have been able to convert them using Adobe DNG converter 8.2 but under the file's info I see "Dimensions 0x0". I don't understand why this is happening or how to change this so that it reflects the correct size of the image. Also, I am not able to see thumbnails of the images once they have been converted, and again can't understand why.
Can anyone suggest what I'm missing here?
I have converted photos previously to .dng and they are visible as thumbnails on my mac and the dimensions are shown in their properties so can't understand why this is happening with this new set of photos.
Thanks

Are the dimensions those of the embedded preview? Check to see what size of preview you have set in the DNG Converter options. Perhaps it is set to None.

Similar Messages

Printing problem with converted AW files

I've searched the forum for an answer to this to no avail, so here goes...
My wife recently bought a Mac mini as an upgrade to her "classic" iMac. I've managed to get the majority of her old files transferred over to the new machine but recently ran across a frustrating problem. She has created many files on her old machine using AppleWorks 5.0.3 and wants to use these files on her new machine using AW 6.2.9. The files open and edit fine, but when we go to print, her HP DeskJet 832C bucks and coughs and tries to print but only gets about 3/4 through the first page then stops. I've checked to make sure the printer driver is current and also reinstalled AppleWorks, but the same problem occurs. Any new files she creates using AW 6.2.9 print just fine and other software on the computer prints docments OK, too (PDFs, calendar, etc.). It appears to be just the converted AppleWorks files that complain. I can even copy the text from an old file to a new file in AppleWorks and THAT prints fine, but that's a hassle. Any ideas on this problem? Any help you can give would be appreciated. Thanks.
Mac mini Mac OS X (10.4.3)

Mac OS is "confused" about what program these files belong to & so gives them a generic one. This can be a result of not using Disk Utility to repair permissions after a system update. It is easily fixed.
Highlight a known AppleWorks document in the Finder, highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose AppleWorks 6. If AppleWorks 6 is not a choice, choose "Other" & navigate to the AppleWorks 6 application. Now click the "Change" button under the text that asks if you want to open all documents like this with AppleWorks 6.
Sometimes it can happen if files are transfered from one Mac to another using a PC-formatted disk. I have written a user tip dealing with this, AppleWorks 6 won't open my AW 5 files. Even though the title says AppleWorks 5 files, it also applies to not being able to open AppleWorks 6 files.
Peggy

Problems with iWeb 09 on Safari 4.04 on Snow Leopard 10.6.2

My iWeb 09 v. 3.0.1 website comes out funky, with fonts messed up on some pages, missing pictures, etc. Even on Firefox 1.5.0.12 same issues.
Yet, the same site on my old laptop with OSX 10.4.11 and Safari 4.0.3 runs fine. And runs fine on Firefox 1.5.0.12.
Are there known issues with iWeb 09 with Snow Leopard and Safari?
Frustrating!
Thanks

So you started from the normal Tiger system and inserted the SL disc, tried to install but it ejected the disc without an automatic restart?
If you do the installation that way, the system update is carried out while the restart is in progress before the internal HD is remounted (which it why it takes a long time to restart).
If that's failed, have you tried inserting the disc, immediately restarting and holding down the C key during startup?
If that boots you to the installer, you will need to ignore the install screen to begin with, select Disk Utility from the Utilities menu in the top menu bar and erase Macintosh HD before continuing the installation.
What I'm guessing has happened is that the installation has written the system files to their temporary folder from where they would be used to replace the existing Tiger system during the restart. Something has prevented that replacement from happening, but when you now insert the disc, the presence of the temp files inhibits it from proceeding further.
Erasing the Mac HD will remove all of that and should allow a clean install.
However, it will also wipe everything else, so make sure you have a current backup before proceeding down that route.

Problems opening documents (zip files, excel) after upgrade to Snow Leopard

Since upgrading to Snow Leopard I have not been able to open a lot of files. Mainly, zip files and excel documents (which I had no problem opening before the upgrade. It seems that when I save the files down (from my email or whatever) the files go into the "Archive Utility" program, I try to open them from the Finder but they still won't open (or unzip).
When I go to open an excel document (most likely from a PC user), I get a msg that the file isn't formated for excel. However, before the upgrade to Snow Leopard I had no issue opening this same file in Mac Office-Excel.
Thanks in advance for your help/advise.
-Katherine

Hello Katherine:
I have not experienced those problems, but I do not receive Excel spreadsheets via E-mail. My Stuffit Expander version is 13.0.2.
You might want to check your Excel preferences to see if there is a setting that needs to be changed (compatibility?). I use Office 2004 so your version may be different.
You could also trash preference files to see if something happened during the install.
Barry

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Problems with converted .MTS files in Final Cut Express 4

I have a hard drive full of video shot and a consumer grade HD camera in the .MTS format.
After struggling with finding an acceptable converter, I finally bought iSkysoft's Video Converter.
I've been using the converter's output preset of "MP4 Format for Final Cut X" and "High definition MP4 format" settings and they both yield the same results.
Now I am having problems simply editing the footage in FCE4.
I can take the footage and set i/o points in them but when I drag clips into the timeline, it often hangs up, locks up, FCE is unresponsive and it's even crashed.
This is on a 2 x 3.2 GHz Quad-Core Intel Mac running 10.6.8.

In order to use .mts video in Final Cut Express, you need to convert the video to QuickTime/Apple Intermediate Codec before importing into FCE. .mts video files are typically H.264 video, highly compressed and is not something that FCE can edit. Ditto for "MP4 format for FCPX or HighDef MP4 format". If iSkysoft cannot convert to QT/AIC then I suggest Clipwrap
Note: for the future, if your camcorder is an AVCHD camcorder you can directly ingest the video from the camcorder into FCE.

Problem with converted mod file

Hello,
I have taken some clips with a friends camera, which saves them to the oh so annoying .MOD format.
I have converted it to avi, h264, mp4, and whats not, but when I already succeed to import the file to premier, when I play and view it during editing, only the audio works, I cannot seek, and the video is frozen, at the maximum moving 1 to 2 frames.
it also makes the play/pause inaccessible sometimes.
In addition, when exporting the file, the same behavior is encountered in the final file.
What should I do?
Thanks for the help.

Rename files to .mpg or try this one:
http://converio.fr/converio_095.htm

Problem with converting psd file to jpeg

I have completed a project with lots of layers and saved as a psd file including all the layers. I then flatten the image and save it as a jpeg. The jpeg doesnot look at all like the original psd.
this is the only file I have ever had that has done this. no other files are currently doing it. Just this one important days to complete file.
I work with Mac OS 10.6.8 Photoshop CS6 - Raw file to begin with. Never had this issue.
Anyone have any ideas.
I tried taking it into Cs5 and it did the same thing.

My dad took some maternity pictures of me, he took majority in B&W I wanted to make certain parts in color only so I watched a youtube tutorial to add color to a B&W he said to convert to a CMYK so I did, I continued to follow his instructions step by step. He just didn't mention that when it would save it would save as a PSD so I didn't even know abt that format until AFTER it happened. So I began to look up how to convert from PSD to JPEG...every forum I saw I tried what they suggested to no avail. I then went back to the original JPEG image, RE DID the edits, only this time when I went to save (as the SAVE AS feature truly isn't working, I can click it and click it, even use the shortcute keys...nothing happens) I scrolled down, chose the JPEG 2000 selection cause a forum said to chose JPEG when it pops up PSD, I didn't realize that it was different than a reg JPEG format and now it won't open even in cs6 it says NOT ENOUGH RAM and IDK why. So I've now gone yet again to the original JPEG, switched it to CMYK did all the edits again, I am now done editing, only this time I'm going to have someone tell me what to do next as it's still JPEG, 8bits chanel and I have NOT flattened it....what do I need to do next in order to insure it saves as a jpeg so I am able to upload it online?
I am not sure how to do screen shots or I would love to take them so someone can see exactly what I see. IDK if it matters but I am using the trial version of cs6, I was trying to get used to it some before I upgraded from cs5 extended.
If someone can instruct me as to how to post a link to the image so someone else could edit it then I'd be glad to do so.
I'm not an idiot...everyone started out a beginner at some point and I happen to be not as advanced as others...I see no fault in that, I am a 25 yr old woman who is busy as a working at home mom so forgive me if I can't invest a lot of time into learning a new program as quickly as I would like.
Thanks to anyone who can and is willing to help.

Envore cs4 problem with convertion project file blue ray.

Encore CS4 problem z konwersja plików cs4 Projekt blue ray.

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Can't convert CR2 files with DNG converter

After buying the Canon T2i, I realized that the files (CR2) won't open in PS. I did my research and found that the dng converter was the thing I need. Unfortunately, the converter won't recognize and convert the CR2 files that I try to convert.
I am guessing I will probably get a reply telling me I should have done my research before I bought the camera (as I have seen in other forums), but I am hoping for a more productive (and less offensive) answer.
Thanks!

I see a lot of answers speaking about having the most up to date version of the Camera RAW Plug-in. I have a similar issue with my .CR2 files... I cannot open them in Camera RAW because it tells me that my camera model or make is not supported by the Plug-in, and so I was directed by other forums to just try converting the .CR2 files to .DNG. I already had the Adobe DNG Converter (version 6.5 I believe), so I tried this. It too told me that my files or camera make were not supported. However, I have always been able to successfully both open my .CR2 files AND convert them to .DNG. I had not updated anything on my camera nor on my Adobe programs and for some reason this last attempt to open RAW files failed me... I have no idea what change would have led to it. Luckily I shopt in both RAW and Large JPG but I certainly don't want to rely on my JPGs of course... Any idea why this problem might have arisen now if it had always worked easily in the past?
Thanks!

Problem with converting .RIFF : I still cannot transfer RIFF file to ipod

Snitch
Posts: 13
From: Cali
Registered: Feb 13, 2006
Problem with converting .RIFF to mpeg4 even tho its a mpeg
Posted: Jun 2, 2006 2:19 PM
1st problem trying to convert mpeg video thru ipod converter. I have successfully converted DVD`s and other downlaoded videos but this is the 1st time i ran into a wall.
I am using GSPOT CODEC software and it says its a "riff- wrapped " file. When I open up Videora converter it doenst do anything meaning no green bars to show its progressing into mpeg4 format. It does finish and it goes to finish videos but when I try to manually put it in my I-tunes it doenst do anything. Why i am posting this. I am frustrated. WHAT -and it appears to be mpeg - the heck is RIFF wrapped file? Please help I have GUNS n ROSES live at ritz 1988 rare footage andI want it on my ipod and It does play in my windows media player so its a true video with sound
Intel P4 Windows XP Black 60 GB Video w/ Agent 18 shield
Johnathan Burger
Posts: 1,450
Registered: Jul 27, 2005
Re: Problem with converting .RIFF to mpeg4 even tho its a mpeg
Posted: Jun 3, 2006 1:38 AM in response to: Snitch
Never heard of RIFF, so I did research and found these sources: http://ccrma.stanford.edu/courses/422/projects/WaveFormat/
http://en.wikipedia.org/wiki/RIFF
Good luck.
17" iMac 1.8ghz G5 2GB 12 iBook 1.2ghz 512mb 5th gen iPod Mac OS X (10.4.6) Microsoft Free since '92
Pages: 1 Back to Topic List

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Problem with Converter

Problem with Converter. When I save a PDF it is saved as a Word document and I cannot open it. What is the problem? I have uninstalled the Converter, but it continues to save PDF as Word.

I cannot open the file with Word. I am not trying to convert the file at
all. When I save a PDF and then try to open the file, it is saved as a
Word document and it will not allow me to open it.
On Wed, Mar 26, 2014 at 9:58 AM, Claudio González

What is the problem with converting objects with gradients to gradient mesh?

What is the problem with converting objects with gradients to gradient mesh?

slange,
There may arise some smaller corruption states that may be cured by what you did, as you can see in the list. Sometimes, restarting thrice is needed.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

Problems with converted .CR2 files to .dgn on Mac Snow Leopard

Similar Messages

Maybe you are looking for