Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Similar Messages

  • Premiere Pro CC and After Effects CC work slowly together - much worse than CS6

    Premiere Pro CS6 and After Effects CS6 worked together really well.  I could have both programs open and make a change in After Effects, then go back to Premiere Pro and see the changes pretty quickly.  Since upgrading both to CC, I can't jump back and forth and see the changes quickly.  I literally have to hit Enter and render the After Effect clip after every freakin' time I make a change to it in order to see it without any pauses or jumpiness in the playback.  CS6 worked great.  I can't express my disappointment in the Creative Cloud "upgrade".   So many things are SO MUCH WORSE!!!   Adobe you have to fix this stuff.

    The speed of the connection is dependent on your hardware and the type of comp you have in AE.
    I haven't noticed any significant performance difference between the two versions (I've also been heavily using dynamic link since CS6 ).
    Some comps will play fine in Premiere, some comps will need rendering. I generally render the clip in Premiere, as opposed to AE.
    If the same comp from CS6 is behaving significantly worse in CC, then you might be on to something, but it is most likely a bug isolated to your hardware config and not a general CC issue.

  • Premiere Pro CS5 and After Effects CS5

    Hi I'm fairly inexperienced when it comes to Adobe products. I was wondering whether Premiere Pro CS5 and After Effects CS5 can be used together, for instance Premiere Pro to do the basic editing and After Effects to do some more advanced stuff before importing the clip back into Premiere Pro for exporting the film.

    Yeah.

  • Premiere Pro CC and After Effects CC - Dynamic Link of an .aep not working - Stalls during import

    I have been trying to import an .aep file into Premiere Pro CC from After Effects CC. As suggested, I import the file. The dynamic import window appears. It states connected to file along with the import files ... dialogue box. It stalls there.
    I have been working off my network and have all the files collected on my machine.
    My workaround to get me to deadline was to render my clips from AE and import them. Importing the .aep would make more sense from efficiency and workflow.
    Thank you

    Thank You, Jim -
    Unfortunately that specifically did not work.
    Based on another comment sent to me, here is what did.
    In PProCC
    File > Adobe Dynamic Link > New After Effects Composition
    In AECC
    From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
    Back in PProCC
    File > Adobe Dynamic Link > Import After Effects Composition
    Magic.

  • Dynamic Link/ Replace with After Effects Composition between Premiere Pro CC to After Effects CC won't work. Says "importer reported a generic error"

    Trying to use the "Replace with After Effects Composition" to use Warp Stabilizer on a clip and transfer it back into Premiere Pro CC. The action is not  "grayed out" it allows me to click it and it opens up After Effects, then asks to open a new composition, but it doesn't open up the clip for me to work on it.
    Also is the Dynamic Link and Replace with After Effects Composition the same thing?
    Ive watched several tutorials and read threads but I still don't understand who to fix my problem.
    I have both CC versions of PP and AE, if that makes any difference.

    You have not provided any system information, no details about your sequence settings, your footage and whatnot. Nobody can even guess what may be going on.
    Mylenium

  • Erratic performance / missing footage with Premiere Pro CC and After Effects CC 2014 dynamic links

    Hi all,
    I briefly touched on this amongst a host of other issues I has having while cutting my last project.
    Unfortunately I never heard anything from anyone regarding my issues with the Dynamic Link system.
    I had to bite the bullet and export (2-4K RAW) chunks of my last project, out of premiere using a Quicktime animation codec. This added an extra week to the post production process (which I did NOT get paid for).
    I'm also a bit frustrated because it pushed the project past the deadline. Though the client was understanding, they were far from thrilled and it reflects poorly on me.
    Anyhow. Project complete, on to the next-
    This time, I'm using mostly footage shot from an FS700 in AVCHD. I figured maybe the RED footage was somehow too much for the program to handle with my specs, however I am having the same issue as last time.
    I'll select a clip, or group of clips, go to replace with after effects composition, and sometimes they all make it, and often times they don't. The clips were shot within a couple minutes of one another and no settings were changed on the camera.
    I've noticed sometime's the media will show up in the timeline, but not appear on the monitor (as pictured below). Other times the name of the clip will appear in the comp, but there will be nothing on the timeline OR in the monitor.
    Never had this problem in CS6.
    Adobe or anybody, please help! This is absolutely killing my workflow, and costing me time and money.
    Here are my specs:
    I'm running Adobe Premiere CC 2014 v8.1
    Freshly installed Windows 7 Professional SP1 PC Desktop
    Freshly installed Samsung 1TB SSD running my OS and Adobe CC
    Intel Core i7-2600k CPU at 3.4GHz (8CPUs) - Watercooled
    16GB Ram (3gb allocated for other programs)
    Nvidia GeForce GTX 570 4GB GDDR5 - 3.40.62 Drivers installed
    Pulling media from 2x 3TB Seagate Barracuda 7200RPM drives, striped at RAID 0
    In this case pictured the second two clips in the sequence linked into AE, but the first wont show up in my monitor.

    Thank You, Jim -
    Unfortunately that specifically did not work.
    Based on another comment sent to me, here is what did.
    In PProCC
    File > Adobe Dynamic Link > New After Effects Composition
    In AECC
    From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
    Back in PProCC
    File > Adobe Dynamic Link > Import After Effects Composition
    Magic.

  • Avid Unity with Adobe Premiere Pro CC and After Effects

    Has anyone used Avid Unity for media with Adobe Premiere Pro CC? I'd like to hear some feedback as we are working on doing that right now, and I'd like to know what the hurdles or pitfalls might be.

    Open System Preferences > Mouse and/or Trackpad.
    Adjust the speed.
    If that fails, try running the combo updater.
    OS X Mavericks 10.9.3 (Update (Combo)
    http://support.apple.com/kb/DL1746

  • AMD FirePro D500 and Premiere Pro CS6 and After Effects CS6?

    My company just recently purchased the new 2013 Mac Pro with the AMD FirePro D500 graphics cards. Everytime I try to open After Effects CS6 I get a GPUManager Sniffer Result Code: 3 error and Premiere Pro CS6 sits on the splash screen indefinitely. Does Adobe not play nice with the new card? Am I out of luck?

    In effort to fix the problem while waiting for a response I unstalled both AE and PP CS6 but not I can't seem to reinstall them from anywhere.... so I don't know what version of After Effects I have/had.
    My operating sysem is OS X 10.9.2 (13C64) . My graphics card information is:
    AMD FirePro D500:
      Chipset Model:          AMD FirePro D500
      Type:          GPU
      Bus:          PCIe
      Slot:          Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):          3072 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x679e
      Revision ID:          0x0000
      ROM Revision:          113-C3861J-687
      gMux Version:          4.0.11 [3.2.8]
      EFI Driver Version:          01.00.687
    As far as CUDA, I originally had an iMac that was using Time Machine and that is how I transfered my stuff over to the new Mac Pro. It had CUDA on there...

  • How to properly configure a graphics card for Adobe Premiere Pro, SpeedGrade, and After Effects?

    Alright, so I have the following system configuration:
    2 NVIDIA Geforce GTX 970s
    5960X CPU
    MSI X99 Gaming 7 Motherboard
    32 GB DDR4 RAM
    256 GB and 1TB Samsung 850 Pro SSDs
    Basically, although I have the whole system built together, I'm unsure how to check and know whether or not Adobe Premiere Pro is actually using the graphics card or not.  I know that it has to be using some of it, otherwise it wouldn't launch properly (as I discovered from a recent experience.)  However, I don't know if there are, perhaps, certain settings within the NVIDIA control panel that should be configured so that Premiere Pro can use the card to its full potential.  Here is an example of what I'm talking about:
    In other words, these are (I'm pretty sure) all of the default settings that the control panel applies to Premiere Pro.  However, I'm not sure if there are any settings in here that I need to change or not.  So what I'm looking for in a response to this question:
    What settings, if any, should I change for Premiere Pro (as well as other adobe applications that can utilize all the strength of the GTX 970)?
    How can I check the GPU activity to know that it's being used during a render?  (For example, I can check the CPU utilization with the Task Manager while I render to see that it's being utilized to 100%).
    If, perhaps, something else goes wrong and even with the right settings, let's say the card still isn't being fully utilized, what other settings might I have to change to make sure that the GTX 970 is being fully used by Adobe Premiere Pro/After Effects/SpeedGrade CC 2014?

    If you want a benchmark to measure the performance of Premiere Pro's utilization of  your: disk system, GPU and CPU use our Premiere Pro BenchMark (PPBM)
    When you finish running the test and then run the script, you will get this report
    This happens to be the result of my laptop (with SSD drives and a GTX 765M GPU)
    The disk performance is self explanatory.
    Number 2 is a seven layer very complex timeline with heavy CPU and GPU assistance, without GPU hardware acceleration (CPU only) it would take greater than 1350 seconds.
    Three above is a measure of a exaggerated timeline using many, many GPU MPE accelerated effects and features that will use a GPU at 99% load (54 seconds above) and a CPU only export of the same timeline (802 seconds).
    If you want to compare your results to others you have to register on the PPBM7 site to see the results.
    EDIT! I corrected the number in 2 above originally I said 900 seconds but really it was greater than 1350 seconds

  • Premiere Pro CS5 and After Effects CS5 crash after splash screen

    Im am fed up with this ive done everything i can and no one seems to know whats wrong, i installed CS5 on my macbook and imac i7, and they both worked for a while but then suddenly my imac i7 cs5 stopped working and kept crashing, my macbook continues to work just fine, ive even done a system reinstally and reinstalled os x and yes it would work for a little and then stop, they both have the same programs, whats weird is when i create a new user with admin privileges on my imac it would work fine but i deleted some files in the main account trying to fix the problem and no it wont work in the second account so here i am doing a system reinstally one last time. i called adobe they were no help at all literally, i called apple they did as much as they could i mean apple really made me feel like they tried, so here i am can anyone help?

    Ok so i figured it out, the problem is my downloaded fonts from the internet. What sucks is that adobe cs4 applications ran perfectly fine with them, but now cs5 doesnt . I uninstalled my downloaded fonts and guess what?! it worked! I wonder why cs4 starts up with no problems with the same fonts and cs5 cant, thats just stupid...

  • I'm having trouble downloading Premiere Pro CC and after effects

    I am using the cloud however the requested software is not showing up.please assist me.

    Adobe's MINimums http://www.adobe.com/products/premiere/tech-specs.html
    -Programs won't display if they will not install on your computer
    -http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html
    This is a user to user forum, I think you need Adobe
    Adobe contact information - http://helpx.adobe.com/contact.html
    Adobe Knowledgebase http://www.adobe.com/support/
    Help for Download & Install & Setup & Activation http://forums.adobe.com/community/download_install_setup
    Next link has a "Chat Now" button near the bottom
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • Dynamic Linking between Premiere pro cs6 CC and After Effects is shaded grey and not working.

    Hi, I currently have a CC membership with everything included in the package. I have already downloaded Premiere Pro CS6 and After Effects. However, I cannot figure out why , when I right click a video clip in Premiere, the dropdown menu has the 'replace with after effects' option within the list greyed out, apparently not an option for me. I've browsed several tutorials and all of them illustrate using dynamic linking with ease as a readily available option. Can anyone help with this please?

    Thank You, Jim -
    Unfortunately that specifically did not work.
    Based on another comment sent to me, here is what did.
    In PProCC
    File > Adobe Dynamic Link > New After Effects Composition
    In AECC
    From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
    Back in PProCC
    File > Adobe Dynamic Link > Import After Effects Composition
    Magic.

  • I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    Hi,
    Regarding the issue here, please take a look at the below links to see if they could help:
    Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
    And a blog here:
    Windows Server 2012 slow network/SMB/CIFS problem
    Hope this may help
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Adobe Dynamic Link will not work - Premiere Pro CS4 to After Effects CS4

    Hello,
       I am edited a video with a deadline, I'm importing a sequence from Premiere Pro CS4 to After Effects and making edits in After Effects. I'm able to import the Premiere Pro sequence into After Effects using Dynamic Link, but  I go back to Premiere Pro and nothing has changed. Then I have to export the 21 minute long video in After Effects and that takes about 12 hours, that I can't afford. I don't know what I'm doing wrong, before I imported the timeline into AE, while I was in Premiere Pro I right clicked it and selected -Edit original. It took me to the .mov that I imported- since it's a redo. I learned how to use Dynamic Link from this tutorial-
    http://tv.adobe.com/watch/learn-cs4-production-premium/using-dynamic-link/
    At first when Dynamic link didn't work I thought it was because I was cutting the imported Sequence from Premiere Pro in After Effects becasue I was motion tracking. When you import a Premier Pro sequence can you cut it into individual layers in After Effects? 

    I'm importing a sequence from Premiere Pro CS4 to After Effects
    That doesn't create the type of Link you want here.  In this case, changes made to PP would show up in AE.  You want the reverse.  (And you can only go one way, not both.)
    http://help.adobe.com/en_US/PremierePro/4.0/WS725e431141e7ba651172e081238226cdf5-8000.html

  • How can I go from Premiere Pro CS5 to After Effects CS6? (Problem)

    Hi,
    I am trying to send my clip from Premiere Pro CS5 to After Effects CS6, but when I right click on the clip, I can't even select the option to send it to After Effects. I can see the option to send it to After Effects, but I just cant select it. Any ideas?
    Thanks,
    -Billy

    You can do what you want... only going the other way!
    You can import a CS5 Premiere Project (in its entirety
    or a selected sequence) into CS6 Ae.
    In CS6 Ae:
    File>Import>Adobe Premiere Pro Project...
    Navigate to your CS5 Premiere project, double-click
    and select 'All Sequences', or your preferred sequence.
    As Jim points out, Dynamic Linking will only work
    between matching versions of Pr and Ae.

Maybe you are looking for

  • Badi for purchase requisition and stock transfer order

    Hi, Could anybody please tell the BADI to update the item details (dates etc) in the 'Purchase requisition' and stock transfer orders. I could find ME_PROCESS_REQ etc but could not locate the methods to modify the item level data. Thanks & regards, R

  • Big problems with itouch update to 2.1

    i have a nice young friend (11) who was so excited to get the itouch for christmas. Last night he tried to upgrade so he could download applications....and now nothing works. I looked on line for him and tried to coach him with restarting, etc. can s

  • VF04 - Maintain Billing Due List

    Hello all, The Billing Due List is displaying several Orders which have been already fully invoiced. My questions are: 1) If I execute the Billing Due List, will the sales orders(the ones that are already invoiced)be invoiced again? 2) How to delete

  • Configuration Assistant FAILED during Oracle 10.2.0.1.0 g installation

    The Configuration Assistant Failed during set up. Can someone tell me how to resolve this problem. My reading reveals that I can use the database, however, it may not function properly? What should I do?

  • Basic ResourceBundle question

    In my applet I use a library which makes use of the ResourceBundle mechanism for localized text messages. As in many libraries the library I use only contains one default resource bundle file. As any unsuccessful resourcebundle-lookup makes unneccess